Resultados de la búsqueda

Notes: The Kenton Thru-5 is a high quality MIDI Thru box with opto-isolated MIDI In and separate drive for each MIDI Out. It is powered from a mains adaptor (wall wart) so you can fit and forget.

Comes with multi-region power supply

Notes: The MIDI Solutions Quadra Thru is a 1 in 4 out MIDI Thru Box. All MIDI messages appearing at the input are sent to all four Thru outputs. Active circuitry cleans up any skewing of MIDI data bits that has occurred at the input, ensuring reliable operation in setups that require daisy chaining or long cable runs.

The Quadra Thru is MIDI powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.

Notes: Module A-124 is a special 12dB multimode filter using the "strange" filter circuit of the "EDP Wasp" (an analog synthesizer with black/yellow case built end of the seventies, manufactured by the UK company "Electronic Dream Plant" with Chris Huggett und Adrian Wagner). This design "abuses" digital inverters as analog operational amplifiers leading to distortions and other "dirty" effects that generate the specific sound of this filter. The filter is equipped with a band pass output and a combined low/notch/high pass output. For this output a control knob defines the relation between low and high pass signal. If both signals appear at the same level (i.e. middle position of the Mix knob) one obtains a notch filter. Otherwise the low or high pass signal predominates. The module does not feature self-oscillation in contrast to most of the other filters of the A-100 system.

Inputs: Audio In, CV In (2x)
Outputs: Bandpass Out, Low/Highpass Mix-Out
Controls: Audio and CV attenuator, Frequency, Resonance, LP/HP Mix

The function and operation of this module is very similar to the module SEM VCF A-106-5. But the sound of both filters is very different! The only functional difference is the position of the sockets and controls, and the function of the controls CV2 (A-124: normal attenuator, A-106-5: polarizer).

- 3U Eurorack module, 8HP wide, 45mm deep
- Current draw 30mA

Notes: The microZEUS is a 4HP power supply module for Eurorack format synthesizers. It is the smallest and most powerful power supply available for its size.

uZEUS with flying bus boards: this version features two ribbon bus boards. All you have to do is plug in your modules and play.

The uZEUS mixes linear and switching power technology to produce 1000mA at +12V, 500mA at -12V, and 170mA at +5V and uses a standard +15VDC non-regulated wall adapter for power.

Notes: The ISO-PUCK mini is the new little brother of the popular ISO-PUCK, offering the same benefits but designed for lighter speakers and monitors. The IsoAcoustics ISO-PUCK mini provide an innovative new approach in isolating studio monitors, speakers and other systems. This unique design provides a high degree of isolation while resisting lateral movement and oscillations, which results in greater sound clarity and focus. This versatile isolation tool is possibly the most cost effective upgrade available for improving the performance and clarity of your speakers or monitors.

Notes: The Kenton Merge 4 can merge the data from up to 4 separate MIDI sources (e.g. Master keyboards or controllers) into a single MIDI data stream which appears at both of the MIDI out sockets. It features 4 opto-isolated MIDI inputs and 2 MIDI outputs.

The Kenton Merge 4 is powered from a mains adaptor (wall wart) so you can fit and forget.

Comes with multi-region power supply

Notes: Perennial favourite studio headphones from Sennheiser's extensive range. Closed-back design with an emphasis on isolation and comfort for long periods of use. Great all-rounders

Supplier notes:
The HD 280 Pro is Sennheiser's most significant closed, around-the-ear headphone to be introduced in years. Designed to exceed the demands of the professional environment, the HD 280 Pro boasts extremely robust construction combined with the sound quality, modular design and aggressive noise isolation the necessary in the field. The unique collapsible design, combined with swivelling ear cups, offers maximum flexibility in any application.

Notes: IsoAcoustics introduce the next evolution of their specialized line of speaker stands for the audio professional, music hobbyist, audiophile, and music lover. The new ISO Series of speaker stands provide superior acoustic isolation and enhance the sound clarity of any speakers including studio monitors, home theatre systems and sound reinforcement.

With a lower profile and new contemporary design, the ISO Series of stands positions your studio closer to the supporting surface or meter bridge, and the new redesigned isolators moves the acoustic performance another step forward.

IsoAcoustics ISO Series speaker stands are built with a unique, patented isolation technology that provides a high degree of isolations and manages the speaker's energy to deliver authentic, uncoloured sound. This next generation of speaker stands effectively eliminates energy transfer into the supporting surfaces. Bass becomes tighter, overall imaging is enhanced and your speakers are enabled to perform to their full potential. Following the same design philosophy as the ISO-L8R Series, these isolation stands provide 14 variations of height and tilt adjustment to optimize the placement and performance of studio monitors by getting the tweeters in the correct alignment with the listening position.

Whether you're a pro mixing in the studio - a musician creating in a home project environment - or an audiophile who appreciates every nuance of music and sound - you'll hear and appreciate the difference with the ISO Series speaker stands. It's simply the best investment you can make for superior audio.

ISO-155:

Designed for medium size speakers and studio monitors. These stands provide 14 variations of height and tilt to optimize speaker placement and performance. Isolate your studio monitors from the supporting surface and allow them to breathe so they can deliver the clearest and most accurate sound possible.

6.1"x7.5"/15.5x19cm Short: 2.9"/9.5cm Tall: 8.75"/22.5cm 40 lbs/18kg

Notes: Korg is always building new ways to experience hands-on, fun music-making. Now, you can too.

The Nu:Tekt NTS-1 digital KIT is a unique, flexible, and easy DIY synthesizer that you can easily assemble yourself, without any soldering (tool included!).

The first of its kind from KORG's DIY-focused Nu:Tekt brand, NTS-1 packs a powerful synth and multi-effects engine into a compact form factor that you can carry and connect anywhere. Its DIY nature means it's also very customizable. Explore the possibilities!

Included items: USB cable, owner's manual, screwdriver

Notes: A-138s is a simple but useful 4-in-2 mixing tool. It has four inputs available. Each input is equipped with an attenuator (Level) and a panning control that is used to distribute the signal to the left and right output. Beyond stereo mixing it is equally suited to create variable parallel routings. For example: Any of the four inputs may be routed in variable intensity to feed two filters.

You may regard the A-138s as a smaller version of the A-138m Matrix Mixer.

Inputs and outputs are DC coupled, i.e. the module can be used for the mixing of control signals too.

- 3U Eurorack module, 8 HP wide, 30 mm in depth
- Power consumption: 10 mA at +12 V and 10 mA at -12 V

Notes: The 'HPO' is an affordable super slim and skiff friendly no frills stereo headphone driver output for your modular synthesiser. Includes a volume control and ability to double up a mono signal into stereo. A great use for that left over 2hp in a skiff or larger system.

Give loved ones, friends and acquaintances a break from your musical 'genius', the HPO offers a solitary cell for focused creativity impregnable from undeserving non-believers.

Notes: Excellent value from Arturia's hugely popular mini controller. 25-key design with pads, faders, rotary pots and transport controls for full hands-on playability of software synths and DAW features.

Supplier notes:
MiniLAB 3 is a compact MIDI keyboard & pad controller that lets users make music, right out the box. With a creative plug-and-play workflow, versatile assignable controls, 500 curated sounds from Analog Lab's massive library, and a bundle of world-class creative software, MiniLAB 3 is designed to finally help beginners and professionals to get truly immersed in their music creation flow, whatever their style.

Hands-on, easy to use

From the great-feeling keyboard to the smart DAW-integrated pads & faders, to the real-time mini display, every aspect of MiniLAB 3 is designed to be intuitive, expressive, and a joy to use - for beginners and pros alike.

Creative features

Enjoy a workflow that aids the creative process, with features like a built-in arpeggiator, Chord mode, custom DAW presets, and easy transposition. Making music has never been so accessible.

Portable, compatible design

MiniLAB 3 is built to fit seamlessly into any setup, from bedroom to stage, with its compact & lightweight design, deeper DAW integration, and MIDI out & USB-C connectivity.

Eco-Designed

MiniLAB 3 is built with longevity and sustainability in mind. A rugged road-ready design, 5-year warranty, minimum 50% recycled plastic construction, and 100% recycled packaging means this controller goes the distance.

Creative software included

On top of a world-class MIDI controller, users get a full package of premium music-making software, from an industry-standard DAW to well over 500 synth & keyboard presets.

Production-ready bundle

Everything that users need to start creating their own music. Explore premium tools like Ableton Live Lite, Analog Lab Intro, UVI Model D grand piano, and Native Instruments "The Gentleman upright piano; enjoy access to millions of royalty-free lifetime loops & samples with a Loopcloud 2 months subscription + 1 Welcome pack + 1 pack of your choice; get to grips with playing keyboard, finger drumming, DAW production, and even music theory with a Melodics "unlimited" trial subscription & bonus lessons.

What's fun to play with

MIDI Control Center

Use the Midi Control Center to customize your MiniLAB. You can change the Velocity curves (keyboard and pads), the Knobs acceleration, the Pedal input type and polarity, the Message types with their Min and Max values, the MIDI Channels, and much more. Shape the MiniLAB exactly the way you need it to be.

Switch MIDI Channel - Shift + a key with a number above it will change the MIDI Channel.

Hold a note - When engaged, every note played will be held. Playing new notes will replace the previously held notes.

Chord mode- Shift + Hold will activate "Chord mode". Then, just play one note and it will play the full chord with the pressed note as the root note. You can record a custom chord by keeping Shift + Hold pressed while entering up to 16 notes.

Transposition - Transpose the whole keyboard by octaves or semitones by pressing Oct or Shift + Oct.

Transport Control - While pressing Shift, you can use the corresponding pads to Play, Stop, Record, Loop, and tap the tempo.

Arpeggiator mode - Shift + Pad#1 engages/disengages the Arp. Long press Shift + Pad#1 to enter the Arp settings. Then use the 8 knobs or the main encoder to set the Arp as you please.

Hold + Chord + Arp - Can be activated at the same time, allowing you to keep the Arp running while tweaking the parameters of a preset.

Pad banks - Shift + Pad#2 toggles between Bank A and B).

Programs - Shift + Pad#3 cycle through the programs. Arturia and DAW programs will automatically connect to any Arturia Software or DAW if there is one open on the computer. You can create and add some User Programs to customize the MIDI CCs, notes, pad colours etc.

Arturia Program - use the main encoder to browse through presets. Press the Main encoder to select a Preset. Long Press the main encoder to like/unlike the Preset. Shift + Main encoder will browse through Types. Select one, and then browse through the filtered presets.

DAW Program - use the main encoder (turn or click), and "Shift + the main encoder" (Shift + Turn and Shift + Click) to access different features depending on the connected DAW.

Back Panel connectivity
USB-C = Connect to a computer or a power source
Control Input = you can set the pedal input to be Sustain, Expression or Footswitch.
MIDI Out = Send midi through MIDI Din port

Notes: I'm the operator with my pocket calculator. Which is actually a drum machine. Cult classic digital beatbox which integrates really nicely with the Sonic Charge MicroTonic plugin.

Supplier notes:
Drum synthesizer and sequencer with para-meter locks, punch-in effects and unlimited sounds with micro-tonic VST through data transfer.

Unlimited sounds:

PO-32 is the first pocket operator which allows unlimited sounds. in addition to the 16 preset sounds, you can use sonic charge micro-tonic VST to craft your own unique sounds and transfer them wirelessly to PO-32 with the built-in microphone, or alternatively by using a cable.

Upgraded hardware platform:

PO-32 has a built-in microphone for transferring and receiving data over sound. it also has a removable lock tab for write protection of patterns. the hanger strength is increased for extra durability, and on the backside of unit there are some useful combo reminders.

New pro-case:

CA-X silicone pro-case is the best companion for PO-32. with an updated design, this case includes a hole for microphone, anti-slip feet, neck strap, battery protection and pro feel buttons. it is also compatible with all pocket operator models.

Notes: Superb value for money with this hugely popular model from the ever-reliable Audio-Technica. A little smaller and a lot cheaper than the excellent M50X model, but with similarly clear, balanced performance.

Supplier's Notes:

The high-performance ATH-M40x professional headphones are tuned flat for incredibly accurate audio monitoring across an extended frequency range.

Your studio experience is enhanced with superior sound isolation and swiveling earcups for convenient one-ear monitoring. Engineered with pro-grade materials and robust construction, the M40x excels in professional studio tracking and mixing, as well as DJ monitoring.

This product includes interchangeable coiled and straight cables, a carry pouch and a 1/4" jack adapter for universal compatibility.

Notes: Module A-151 (Quad Sequential Switch) is like an electronic four-position rotary switch.

It includes trigger and reset inputs, four in/outputs, and a common out/input. Each time a pulse is received at the trigger input socket, the common out/input is connected to the next in/output. After the fourth in/output, the next trigger makes it step back to the first again, and so on. A positive pulse at the reset input switches the out/input immediately back to the first in/output. Voltages in the range -8V...+8V at the O/I resp. I/O sockets can be processed by the module.

Four LED's indicate the active in/output (ie. the one that is connected to the out/input at any particular time).

Notes: 'O/A/x2' is a dual channel attenuverter with each channel also including a bipolar voltage offset and LED monitoring. The module is primarily intended for fine grain flexible 'editing' of control signals (i.e changing the phase, level and DC offset of an LFO signal) but also has uses with audio signals such as attenuation, inversion and mixing.

Technical Specifications:

Supply: +/-12V (Reverse voltage protection)
Current Draw: ~50ma
Size: 4 HP
Depth: 32mm (including power header)

Notes: Module A-151 (Quad Sequential Switch) is like an electronic four-position rotary switch.

It includes trigger and reset inputs, four in / outputs, and a common out / input. Each time a pulse is received at the trigger input socket, the common out / input is connected to the next in / output. After the fourth in / output, the next trigger makes it step back to the first again, and so on. A positive pulse at the reset input switches the out / input immediately back to the first in / output (see Fig. 1). Voltages in the range -8V...+8V at the O/I resp. I/O sockets can be processed by the module.

Four LEDs indicate the active in / output (i.e. the on that is connected to the out / input at any particular time).

Notes: Module A-119 (External Input / Envelope Follower) is designed to allow external audio signals to be integrated into the System A-100. It comprises a pre-amp, envelope follower, and comparator.

The pre-amp has two inputs: an unbalanced input for line level signals, with a gain factor of from 0 to 20, and a balanced input with a gain factor of from 0 to 500, for insertion of low level signals, for instance from a microphone or electric guitar.

The Envelope Follower reads the signal level of the input, and puts out a proportional voltage as an envelope at its own output.

The comparator generates a gate signal whenever the input goes above an adjustable trigger threshold.

Three LED's help you keep track of overload, the envelope, and the gate signal.

Notes: The 'S.B.G' is a compact utility module intended for the interfacing of guitar effect pedals with your eurorack modular system.

It provides both attenuation and amplification of audio signals for level matching together with a crossfade control to conveniently adjust the wet/dry mix of a processed signal. The module also offers regulation of outgoing CV signals for safer use of pedal expression inputs.

Technical Specifications:

Supply: +/-12V (Reverse voltage protection)
Current Draw: ~30ma
Size: 4 HP
Depth: 22mm (including power header)

Notes: Melody synthesizer and sequencer with parameter locks, punch-in effects, arpeggio and chord play styles.

Pocket operators are cleverly designed on a single circuit board. By placing all vital and sensitive components under the LCD display there's no need for an outer case. By saving this cost, high quality components could be used to guarantee the best possible sound and very low power consumption. The space under the display also doubles as a speaker box.

Experience a fresh new way to create music using your thumbs. With its pocket size, its animated graphics, real synthesizer engines, sync, punch-in effects, built-in speaker, alarm clock and impossibly low price, making electronic music has never been this much fun!

Notes: Module A-145-4 is a simple quad LFO (Low Frequency Oscillator). Not a very "exciting" module, just a bread-and-butter device and a simple demon for work. Virtually in every modular system several LFOs are required for modulation purposes. The module contains four simple LFOs with the waveforms triangle and rectangle. A dual colour LED (red = positive / yellow = negative output voltage) indicates the triangle output of each LFO. The frequency range can be chosen for each LFO individually by means of a jumper between about 50 Hz ... 0.04 Hz (about 20 seconds, jumper removed) and about 2Hz ... 0.002 (about 8 minutes, jumper installed).

The module can be treated as a slimmed version of the quad LFO A-143-3 as it has similar features available. But the distances between the controls are smaller and rubberized small-sized knobs are used. In return the front panel has 4 HP only which is less than one third of the A-143-3. The module is primarily planned for applications where only limited space is available. The functional difference compared to the A-143-3 are the missing sawtooth outputs and frequency range switches.

Notes: Komplete Audio 1 is a simple, great-sounding audio interface with all the software you need to put ideas into action. From recording songs, to mixing down and playing out - it helps you go from a spark of inspiration, to finished results you can be proud of.

For the songwriters:
Easily record vocals, guitar, or any other instruments straight into your DAW in high quality. With Ableton Live 10 Lite, synths, and effects included, you've got everything you need to create songs.

For your story:
Whether it's a beatmaking vlog or a podcast you're creating, the interface give you everything you need. Record speech in high quality, then give it a pro touch of mastering with the included plugins.

For the performers:
Take your music to the bar, club, or anywhere else. Bag-friendly sized - it's a simple way to incorporate a laptop into your performance. Make quick, on-stage level adjustments using the big volume dial.

For the producers:
Break out of the box - bring synths, effects, and other gear into your productions. Flip samples from stereo sources. And polish your productions with studio-grade instruments and effects included.

Komplete Audio 1 - recording made simple:
Perfect for recording mono sounds like vocals and guitar at the same time. It gives you two different inputs - XLR for vocals, and jack for guitars or other line-in sounds. Plus, stereo RCA outputs let you connect directly to hi-fi speakers and play everything out loud.

Notes: It's all about the things you connect to the The Field Kit! To get you started, Koma Elektronik have decided to offer an Expansion Pack with a bunch of different sources that you can use and connect to create your own signature sounds.

The Expansion Pack contains:

- 2 x Contact Microphones: Use these contact microphones to pick up vibration or sound, they are an amazing versatile input source
- 1 x Electro-Magnetic Pickup: This guy is good at picking up changes in magnetic fields, you can use it to amplify a string like a guitar pickup or amplify a spinning motor
- 1 x Solenoid push-pull motor: Use the solenoid to hit things, together with the DC Interface the solenoid can make anything rhythmical and percussive
- 1 x DC motor: The Motor can be used to rotate things or as a noisy oscillator together with the Electro-Magnetic Pickup
- 1 x small speaker: Use the speaker to listen to the main mix or as a sound source and to feedback sounds
- 3 x patch cables Always handy to have around to patch up different parts of your Field Kit... and a bunch of little objects to play with (little springs, marbles)

The new KOMA Elektronik Field Kit is the perfect tool for everyone who would like to experiment with electro acoustic sound. Use everyday objects, amplify them and use them to make sound, like our heroes John Cage and David Tudor used to do!

The Field Kit is optimized to process signals from microphones, contact microphones, electromagnetic pickups and able to run DC motors and solenoids. On top of that it can receive radio signals and convert signals from switches and sensors into control voltage!

Notes: IsoAcoustics introduce the next evolution of their specialized line of speaker stands for the audio professional, music hobbyist, audiophile, and music lover. The new ISO Series of speaker stands provide superior acoustic isolation and enhance the sound clarity of any speakers including studio monitors, home theatre systems and sound reinforcement.

With a lower profile and new contemporary design, the ISO Series of stands positions your studio closer to the supporting surface or meter bridge, and the new redesigned isolators moves the acoustic performance another step forward.

IsoAcoustics ISO Series speaker stands are built with a unique, patented isolation technology that provides a high degree of isolations and manages the speaker's energy to deliver authentic, uncoloured sound. This next generation of speaker stands effectively eliminates energy transfer into the supporting surfaces. Bass becomes tighter, overall imaging is enhanced and your speakers are enabled to perform to their full potential. Following the same design philosophy as the ISO-L8R Series, these isolation stands provide 14 variations of height and tilt adjustment to optimize the placement and performance of studio monitors by getting the tweeters in the correct alignment with the listening position.

Whether you're a pro mixing in the studio - a musician creating in a home project environment - or an audiophile who appreciates every nuance of music and sound - you'll hear and appreciate the difference with the ISO Series speaker stands. It's simply the best investment you can make for superior audio.

ISO-130:

Designed for smaller speakers and studio monitors. These stands provide 14 variations of height and tilt to optimize speaker placement and performance. Isolate your studio monitors from the supporting surface and allow them to breathe so they can deliver the clearest and most accurate sound possible.

5.1"x6"/13x15cm Short: 2.7"/8cm Tall: 8"/20.3cm 20 lbs/9kg

Notes: The Meng Qi DPLPG is a Dual Passive 1-pole vactrol based Low Pass Gate/VCA in modest 2 HP. No power is required as the design is completely passive.

Handpicked components ensure that the modules will be musical.

Feed it a trigger and enjoy the natural smooth decay of a vactrol.

Notes: The KMI MIDI Expander enables you to use KMI gear such as SoftStep, 12 Step and QuNeo to control your MIDI hardware devices with 5-pin MIDI DIN connectors.

Plug in your MIDI devices to the KMI MIDI Expander and you're ready to send and receive MIDI data with or without a computer.

Notes: Dual 1 x 3 buffered mult (one audio or cv signal in with multiple buffered outputs).

The output of the first mult is normalled to the input of the second mult to create a 1×6 buffered mult

Notes: The 2hp VCA is a dual, linear VCA. It uses the renowned 2164 SSM architecture, giving it extremely low distortion and high quality audio outputs. With a CV input attenuator, and DC-coupled inputs this is your new go-to module for voltage controlled amplification of audio or CV.

Notes: A-138s is a simple but useful 4-in-2 mixing tool. It has four inputs available. Each input is equipped with an attenuator (Level) and a panning control that is used to distribute the signal to the left and right output. Beyond stereo mixing it is equally suited to create variable parallel routings. For example: Any of the four inputs may be routed in variable intensity to feed two filters.

You may regard the A-138s as a smaller version of the A-138m Matrix Mixer.

Inputs and outputs are DC coupled, i.e. the module can be used for the mixing of control signals too.

- 3U Eurorack module, 8 HP wide, 30 mm in depth
- Power consumption: 10 mA at +12 V and 10 mA at -12 V

Notes: Module A-130-2 is the slim version of module A-132-3 and offers essentially the same features. But the distances between the controls are smaller and rubberized small-sized knobs are used. In return the front panel has 4 HP only which is half the width of the A-132-3. The module is primarily planned for applications where only limited space is available.

The module is composed of two identical voltage controlled amplifiers (VCA). Each VCA has a manual gain control (also named Initial Gain) and a control voltage input with attenuator. The character of the control scale can be switched to linear or exponential. All inputs and outputs are DC coupled. Consequently the VCAs can be used to process both audio and control voltages (e.g. for voltage control of the level of LFO or envelope signals). The signal input has no attenuator available but is capable to process up to 16Vpp signals (i.e. -8V...+8V) without distortion. For the processing of higher levels an external attenuator (e.g. A-183-1) is recommended.

The amplification range is 0...1. Even with a higher external control voltage the amplification remains at 1 (kind of "amplification clipping" at 1).

Controls (for each of both units):

- Gain: manual gain control (Initial Gain) in the range 0...1
- CV: attenuator for the CV input
- Lin/Exp: switches the VCA characteristic to linear or exponential, in center position the VCA is off (mute function)

Inputs and outputs (for each of both units):

- CV: control voltage input, min. +5V required for max. amplification (1) with CV control fully CW and Gain fully CCW
- In: signal input, max. 16Vpp (+8V...-8V) without distortion
- Out: signal output

Notes: Mix is a 4 channel mixer that is great for audio or control voltage signals. Up to four inputs can be combined to a single output each with its own level control.

Notes: Super basic mixer ideal for small hardware setups. Smash a kick drum into a mic input and pretend you're Jeff Mills. Lovely. Two mono mic channels, two stereo line-level channels plus a stereo aux return.

Supplier notes:
Mackie Mix Compact Mixers deliver the quality you expect from the world leader in compact mixer design.

The professional and affordable Mix Series mixers feature high quality components, a rugged metal chassis and features designed for a variety of applications. With Mackie preamps and proven high-headroom, low-noise design, Mix delivers great sound from any source.

Besides, wouldn't you rather Mix on a Mackie?

Notes: Module A-160-2 is an enhanced version of the standard clock divider A-160. The module is a frequency divider for clock/trigger/gate signals, designed to be a source of lower frequencies, particularly for rhythm uses. The Clock input will take any digital signal from, eg. LFO, MIDI sync, or the gate from a MIDI-CV interface. At the outputs, you have access to three sets of seven different sub-divided clock signals, from half the clock frequency down to 1/128. The low/high levels of the output signals are 0V and about +10V.

The A-160-2 also has a reset input. Whenever a reset signal is sensed, all outputs are set to certain levels which depend upon the selected mode.

These are the most important features of the module:

Three different sets of dividing factors, selected by a three-position switch at the front panel:
- Power of two: 2, 4, 8, 16, 32, 64, 128
- Prime numbers: 2, 3, 5, 7, 11, 13, 17
- Integer: 2, 3, 4, 5, 6, 7, 8

Two output modes, selected by a two-position switch at the front panel:
- Gate mode: outputs act like the outputs of typical binary dividers
- Trigger mode: in this mode the outputs are AND-wired with the clock signal (i.e. the clock pulsewidth affects the pulsewidth of the outputs)
- Clock edge type selected by a jumper on the pc board:
- Positive: the rising edge of the clock signal triggers the state change of the outputs
- Negative: the falling edge of the clock signal triggers the state change of the outputs

Reset behaviour by two jumpers on the pc board:
- Level triggered: the level at the Reset input triggers the Reset
- Edge triggered: the edge of the signal at the Reset input triggers the Reset
- Positive: a high level (> 2.5V) or the rising edge at the Reset input triggers the Reset
- Negative: a low level (< 1 V) or the falling edge at the Reset input triggers the Reset

Output polarity selected by a jumper on the pc board:
- Positive: non-inverted outputs
- Negative: all seven outputs are inverted

Width: 4HP / 20mm
Depth: 35mm (Measured from the rear side of the front panel)
Current: +12V: +50mA, -12V: -0mA

Notes: Total Mixing Performance in a Small Package:

MIDImix is a portable compact high-performance mixer that has the unique ability to control your Digital Audio Workstation (DAW) with the press of a single button, giving all musicians and producers complete, uncomplicated mastery over mixing and processing of their digital music creations on the go.

Until now, you had to build and layer your mixes at the performance site first, then transfer that mix at a later time to your DAW for post-mix processing and manipulation. What a pain. This is not the way you'd like to do it, because of the time lag between constructing the initial mix and then not being able to work on it until later in your DAW. This meant you only had a limited ability to create the exact mix you wanted in real time.

The On-Site Mixing Problem Solved:

Akai Professional's portable MIDImix solves this problem completely. With Akai Professional's famous build quality and cutting-edge engineering, it combines a high-performance mixer with 8 individual line faders and a master fader, 24 control knobs arranged 3 per channel and 1 to 1 mapping with Ableton Live (Ableton Live Lite is included). You can send all the mixer's settings to their DAW with a single press of a button, for unprecedented management and precise control over your DAW's functionality. This is great - it means that you can mix and modify/manipulate your projects concurrently in real time, giving you a much wider array of creative options as a result of the far greater creative flexibility afforded by MIDImix.

Nothing Else Like It:

Up until now, there was just no solution for musicians and producers who needed a compact, easily portable way to mix and process their projects on site. But MIDImix is the best solution for portable mixing on the go. MIDImix offers an intuitive, familiar mixer layout, solid connectivity with the most popular DAWs, and legendary Akai Professional quality. MIDImix is exactly what you need to do great mixes and professional processing on site - at the same time.

Notes: The microKEY series are a compact family of USB MIDI keyboards featuring the velocity-sensitive Natural Touch mini-keyboard; acclaimed on instruments such as the microKORG XL and microARRANGER. In addition to the existing 37-key model, the lineup has been expanded with the addition of a supremely portable 25-key model, and a 5-octave 61-key model providing the space to play freely with both hands.

Bundled software and discount coupons are more generous than ever; the 61-key model even comes with a license for the Korg Legacy Collection. The microKEY is the ideal USB MIDI keyboard for the musician who wants to assemble a convenient and compact music production system.

The microKEY25 features excellent portability, allowing you to enjoy playing and producing with a great-feeling keyboard even when you're away from home. It features an expressive Joystick, as traditionally found on larger controllers, and provides simultaneous control of multiple parameters at the same time, along with control of the built-in tempo-synced arpeggiator function. That's not all; the microKEY25 can be powered directly from your iPad via the Camera Connection Kit, and it can be immediately used to control MIDI-capable apps such as Korg's iMS-20. The microKEY25 also includes a download code for FREE Korg M1Le software, giving you all of the preset sounds and all of the PCM waveforms of the original M1, and a browser/search function that makes it easy to find that perfect sound.

Also included are licenses for Applied Acoustics Systems' Strum Acoustic Session, Lounge Lizard Session, and Ultra Analog Session as well as a license for Toontrack's software drum sound module EzDrummer Lite, and a discount coupon for Ableton's Live, Live Suite, and Live LE DAW software, widely popular for its sophisticated functionality.

Notes: This is a simple 1U module designed to allow the monitoring of a system using headphones. However, if your cat isn't easily scared, the headphone jack doubles as a TRS stereo line level output. Simply connect the signal that you want to monitor to the 1/8? jacks, plug in your headphones, and adjust the volume as desired.

Notes: The Korg NanoKontrol2 slim-line USB control surface fits perfectly in front of your laptop computer or desktop keyboard, offering impressive control while conserving valuable set-up space.

The Korg NanoKontrol2 controller provides knobs, switches and faders. It is perfect for controlling any DAW computer based DAW or numerous types of other music production software.

In a body proportioned to fit perfectly in front of your laptop computer, the Korg NanoKontrol2 provides 8 channels of the controllers you need to control your music software. It also features a dedicated transport control section. Many software titles are supported, dramatically reducing the need to make complicated connection settings. 1 knob, 1 fader and 3 switches are provided for each of the 8 channels, respectively assigned to pan, volume and solo/mute/record. In addition, there's also a marker button, making it easy to assign marks at important points in your song for more efficient recording and song production.

Notes: Erica Pico INPUT module is just what you need to interface your modular system with external synths or even your mp3 player or mobile phone.

It boosts external signal to modular synth signal level.

With the Pico Input, line signals from, for example, a synthesizer, drum-computer, audio interface or smartphone can be raised to modular level. The module delivers up to 40 dB of gain. Thanks to its two channels, users can comfortably process mono as well as stereo material.

The Pico Input comes equipped with two signal paths. Each signal path features an audio input, a volume potentiometer and an output. Up to 40 dB of amplification are available. Using jumpers on the circuit board, it is possible to dampen the maximum gain to 20 dB. The module's first input is a stereo jack, meaning the user can connect a smartphone or tablet without any adapter cables. In this case, incoming signals are distributed internally to both channels.

Notes: Module A-148 (Dual S&H) has two identical sample & hold modules, designed to produce 'staircase' voltages. The signal present at the sample input is sampled at a rate set by the signal at the trigger input, and held at that voltage at the S&H output.

The exact shape of the staircase depends on the sort of waveform at the sample input: NOISE or RANDOM signals produce random patterns; an LFO produces rising or falling staircase patterns.

Two LEDs for each S&H indicate the voltage (positive or negative) of the sampled signal.

Notes: Module A-118-2 is the slim version of module A-118-1 and offers essentially the same features as the A-118-1. But the distances between the controls are smaller and rubberized small-sized knobs are used. In return the front panel has 4 HP only which is half the width of the A-118-1. The module is primarily planned for applications where only limited space is available. The functional difference between A-118-1 and A-118-2 is the additional T&H/S&H unit which is not included in the A-118-1.

The module generates the signals white noise, colored noise, continuous random voltage and stepped random voltage (derived from the continuous random voltage by means of a S&H/T&H unit).

The noise signal is generated 100% analog by amplification of the noise of a transistor. White and colored noise are usually used as audio sources. The random voltages are normally used as control voltages (e.g. for filter frequency or any other voltage controlled parameter).
The A-118-2 gives you the ability to mix the relative amounts of Red (low frequency component) and Blue noise (high frequency component) in the colored noise output.

For the continuous random voltage the rate of change (Rate) and amplitude (Level) of the random voltage can be adjusted. The continuous random voltage is derived from the colored noise signal by low pass filtering. Consequently the settings of the controls for the colored noise (Blue, Red) affect the behavior of the random voltage! A dual color LED (red = positive / yellow = negative output voltage) indicates the continuous random voltage.

The continuous random voltage is used as source for the S&H/T&H unit. The type of operation can be set to S&H (sample and hold) or T&H (track and hold). When T&H is chosen the output signal follows the input signal (= continuous random voltage) as long as the Clock input is "high". As soon as the clock signal changes to "low" the last voltage is stored. When S&H is chosen the input signal (= continuous random voltage) is sampled at the rising edge of the Clock signal.

For the Clock signal a "digital" signal (e.g. Clock, Gate, rectangle output of an LFO) is required. It does not work with slowly changing continuous CV signals. Another dual color LED (red = positive / yellow = negative output voltage) indicates the stepped random voltage.

Controls:

Blue: share of the high frequencies in the the colored noise output
Red: share of the low frequencies in the the colored noise output
Rate: rate of change of the continuous random voltage
Level: amplitude of the continuous random voltage
TH/SH: switches between T&H and S&H

Inputs and outputs:

RND: continuous random voltage output (with LED display)
TH/SH: stepped random voltage output (with LED display)
Clk: Clock input of the S&H/T&H unit
C Noise: colored noise output
W Noise: white noise output

Important notes:

After power on it takes a few minutes until the two noise signals and the random signals are generated. The module is not faulty when after power on the signals do not appear immediately!

The S&H/T&H function is realized by pure analog circuitry (electronic switch followed by a holding capacitor and buffer). Consequently the output voltage drifts a bit in the holding state because the capacitor is discharged by parasitic resistors. The drift depends also upon environmental conditions like humidity or temperature.

Dimensions
4 HP
40 mm deep

Current Draw
20 mA +12V
20 mA -12V

Notes: Today's mobile devices make it easier than ever to share your music with the world. From Instagram live-streams to YouTube videos, SoundCloud playlists and more, social media and smartphones have become a key aspect of how many musicians get heard and connect with fans.

iRig Stream makes it easier than ever to share, letting you connect instruments, mixers and more to your iPhone, iPad, Android device and Mac/PC, with convenient features designed just for use on today's most popular platforms. Whether it's mono or stereo, live playing or an existing mix, iRig Stream gets you connected to all your favourite apps, so you can start connecting with listeners instantly.

Get connected:

iRig Stream makes it easier than ever to connect. With USB, USB-C and Lightning cables right in the box, it plugs into all the latest iPhones, iPads, and Android devices, as well as Mac & PC - even the latest devices.

2 line-level RCA inputs are perfect to connect DJ and multi-channel mixers, but are also great for keyboards, synth & drum machine setups, and more. Whether you're looking to stream your DJ set, record band practice, jam along with your favourite song, or even host a podcast, iRig Stream lets you connect a massive range of gear.

Sound your best:

iRig Stream offers 24-bit, 48 kHz A/D and D/A converters to ensure a clean, professional signal regardless of the platform you'll wind up on. And adjustable input gain and easy-to-read level indicators let you dial in the right sound level instantly

Make your voice heard:

iRig Stream offers a unique headphone / microphone jack, wired just like your smartphone, so you can listen and talk over the stereo input simultaneously.

The mic input is mixed into the stereo inputs, to ensure it works with any app, and offers adjustable volume. Best of all, it works with most headphones with a built-in mic*, and also with IK products like iRig Mic Lav, iRig Mic, and iRig Pre, giving you a wide range of options for any situation.

Designed for apps:

If you're ever tried streaming or sharing audio on social media, you know many apps only support mono signals - so iRig Stream offers a mono/stereo switch to compensate. Stereo passes both inputs as left & right channels, and mono mixes them together to a single channel, ensuring you won't lose anything panned to one side.

iRig Stream also offers a loopback function that lets you mix the output of your device with the incoming signal. Load up a backing track in your favourite music app, jam along on your instrument, then send both signals together to a video or live-stream - all on one device!

Comprehensive compatibility:

iRig Stream works with any app that records or streams audio or video, so you'll never stop finding new ways to use it. To get you started, it includes iRig Recorder 3 LE (iPhone/iPad/Android) - an easy-to-use, high quality audio and video recording app. Record, trim, edit and share, right from your device.

Built to go and to last:

iRig Stream is compact enough to slip into the pocket of your backpack, so it's ideal for use on the go. It runs off your device's battery, so there's no batteries to run out mid-show, but can also charge your device with an optional power supply, to keep you going for extended sessions.

Includes:

- iRig Stream interface
- Lightning to mini-DIN connection cable (60cm/23.62")
- USB C-Type to mini-DIN connection cable (60cm/23.62")
- USB A-Type to mini-DIN connection cable (60cm/23.62")

Notes: This is a buffered/active mult with LED indicator. You get two channels of 1 to 3 multiples within a 2HP module. The output of channel 1 is normalled to channel 2 so it can also be treated as a 1 to 6 multiple as well.

Active vs Passive mults:

With a passive mult you are effectively just plugging multiple things into the same jacks. This will often cause some voltage drop in each of the signals. With an active (or buffered) mult you will not get any voltage drop from the original signal.

Comes with a black and gold panel, power cable and one year warranty.

Usage note:

The red stripe of the power ribbon cable goes towards the top of this module.

Notes: A padded carrying case for the Theremini and Etherwave Theremins. Perfect for the thereminist on-the-go. Black nylon packcloth with 3/4" foam padding, removable padded shoulder strap, internal pouch for antennas, and external pouch for power supply unit.

Key Features

Nylon Construction
Pouches for Antennas & Power Supply
3/4" Foam Padding
Removable Shoulder Strap

Notes: TM is a probabilistic random sequence generator based on the research of Alan Turing. His Turing machine was a mathematical model of computation that could, in theory, create any output based on a set of instructions and input variables. In a similar way, the TM chooses random values for steps in a sequence based on the user's probability settings. By manipulating probability and sequence length, the module can generate an infinite number of sequences. Whether you're looking for a controlled random source, or an evolving melody generator, TM has you covered.

Notes: We can't get enough of Teenage Engineering's quirky little Pocket Operators. The PO-24 is an oddball classic, specialising in office-themed percussion. Weird and wonderful stuff as usual from the innovative Swedish brand.

Supplier's notes:
Noise percussion drum machine and sequencer, with parameter locks, solo functionality and punch-in effects.

All pocket operator models perfectly complement each other. From drum machine, bass and lead synthesisers to noise percussion, the six unique units allow you to start a pocket band. Use them separately or connect them together, the choice is yours.

Use the built-in speaker for instant sound, connect a pair of headphones for detailed personal listening, or hook up a speaker system and the club will go boom!

Pocket operators are designed on a single multiple-layer circuit board using high quality components. They all share a compact and durable form factor.

By placing all vital and sensitive components under the LCD display there's no need for an outer case. By saving this cost, high quality components could be used to guarantee the best possible sound and very low power consumption. The space under the display also doubles as a speaker box.

Optional extras:
Add the silicone pro case to protect your pocket operator and get anti-slip feet, neck strap, battery protection and pro feel buttons. Use the SP-10 display protection to protect the LCD screen, and start a jam sync session with your friends using the MC-3 mini cables.

Notes: Lots of functionality in a compact format thanks to Doepfer's typically smart approach. Eight linear VCAs with three mixers built in for good measure. Can be used for both audio and CV signals. Versatile.

Supplier notes:
Module A-130-8 contains eight linear voltage controlled amplifiers (VCAs). Each VCA features a control voltage input (CV), a signal input (In) and a signal output (Out). In addition three mixers are included: the socket labelled "1-4" outputs the sum of the VCAs 1-4, the socket labelled "5-8" outputs the sum of the VCAs 5-8, the socket labelled "1-8" outputs the sum of all eight VCAs.

The signal inputs are able to process levels up to 10Vpp without clipping. Each CV input is equipped with a trimming potentiometer that is used to adjust the sensitivity of the CV input in question. In the factory the module is adjusted for the CV range 1...+5V but can be re-adjusted by the user for other control voltage ranges (e.g. 0...+10V).

The amplification range for each single VCA is 0...1. The signals of the sum outputs have a lower amplification to avoid distortion.

The VCAs and mixers are fully DC coupled, i.e. the module can be used for the processing of both audio and control voltage signals. The control voltage and signal inputs can be normalled by means of small solder pads (e.g. 1 > 2 > 3 > 4 and so on, or 1 > 5, 2 > 6, 3 > 7, 4 > 8 for the stereo application mentioned below).

Typical applications:
any kind of VCA application (e.g. voltage controlled attenuation of audio or control voltage signals)
two voltage controlled mixers with four channels each
voltage controlled stereo mixer with four channels each, for this the control voltage inputs have to be correspondingly patched or internally normalled: CV1=CV5 /CV 2=CV6 / CV3=CV7 / CV4=CV8
voltage controlled mixer with eight channels
add-on for the planned Joystick module A-174-4

HP : 6

Notes: Duatt is a dual-channel active/buffered attenuverter and summing mixer. Each channel has a knob, which can function as a unipolar attenuator or a bipolar attenuverter, depending on the setting of its corresponding two-position polarity switch. It's a versatile and super handy utility module that will find its way into almost any patch you make!

Each input is normalled to a built-in +5V DC voltage source. With nothing plugged into the jacks, each knob controls a voltage range of 0 to +5 V or -5 to +5 V depending on the position of the channel polarity switch.

Channel A's output is normalled into the output of channel B for mixing duties, and channel A has a 2x voltage multiplier switch, allowing you to double the voltage sent into Channel A.

Notes: Module A-106-5 is a 12dB multimode filter that is based on the filter circuit of the Oberheim SEM module.

The filter is equipped with a band pass output and a combined low/notch/high pass output. For this output a control knob defines the relation between low and high pass signal. If both signals appear at the same level (i.e. middle position of the Mix knob) one obtains a notch filter. Otherwise the low or high pass signal predominates.

The module does not feature self-oscillation in contrast to most of the other filters of the A-100 system.

The module generates a distorted audio signal if the level control is set to about 50% (i.e. centre position) or more with A-100 standard signals like VCOs.

Notes: The Buff Mult is a buffered multiple with LED indicators to show positive and negative voltages. Using wide bandwidth opamps, it functions as a dual 1-to-3 or a single 1-to-6 mult for audio, video, or CV signals.

Notes: - Works as a messenger style bag or a backpack
- Space for cables and AC adapter
- Built-in loop for attaching the bag to a suitcase handle

*Photographed Reface unit NOT included*