Resultados de la búsqueda

Notes: Hand built in Japan to exacting audiophile standards, the Model9500 is a thing of beauty. Four-channel rotary design with five-band master EQ. Also available with wooden side panels.

Supplier's Notes:
MODEL9500B Music Mixer

4-channel table top mixer

MODEL9500B (broadcast mixer) Music Mixer STD

ARS MODEL 9500B DJ Mixer is a Japanese made, 4ch. rotary mixer with world's first 3band hybrid isoeq Hi-EQ Mid-EQ Low -Iso on each channel.

This 4 channel High Quality Rotary DJ Mixer has a 3 band Isolator and 5Band Equalizer on the master.5Band Equalizer Control: 75Hz 300Hz 1Khz 3Khz 10Khz 5BandPotentiometer and Switch are All ALPS .

A long time in the development phase, this mixer is a beautiful example of Japanese hand made precision workmanship. Highly recommended.

It is designed with purist ideals with only essential features.

ARS 9500 has 3 band hybrid iso-EQ hi-EQ mid-EQ low-iso on each channel and 3band Iso and 5band EQ on the master.

The Master Isolators can be boost of cut from +18db ~.

The Ch hi-EQ mid-EQ can boost or cut from +12db ~ -12db. LOW-ISO boost of cut from +6db ~.

Each channel has Post Fader Send. also Return and Effect Loop.

* Due to the Model-9500 is designed for a professional use, The body is no power switch to avoid accidentally power off while playing.

* Minimizing the power noise by designing the All circuit board and the power circuit board independently and setting them apart.

Wood is a natural material, so there may be unevenness in the wood grain. Thank you for your understanding.

Specs

Frequency Response: +/-1dB 20Hz-20Khz
Input: 3 x Phono: 47K Ohm / 5 x Line: 20K Ohm
House Output: RCA Unbalanced Impedance 600 Ohm/ XLR Balanced Impedance 50 Ohm
Booth Output: RCA Unbalanced Impedance 600 Ohm/ XLR Balanced Impedance 50 Ohm
Effect Loop: RCA Unbalanced Impedance 20K Ohm
Effect Loop: Output: RCA Unbalanced Impedance 600 Ohm
Send Output: RCA Unbalanced Impedance 600 Ohm
Return: RCA Unbalanced Impedance 20K Ohm

Isolator Frequency Response:
3band hybrid isoeq 1-4Ch /Low-ISO /MID-EQ/HI-EQ
Master 3Band Iso: 10 - 300 Hz / 300 - 3000 Hz / 3000 - 20000Hz boost of cut from +18db ~ -?.
5Band Equalizer Control: 75Hz 300Hz 1Khz 3Khz 10Khz 5Band

Headphone Monitor Trim: Cue-Mix-Pgm
Power Consumption: 30w
Power Requirement: US-115V/EU-230V(Selectable)
Dimensions: (W)366 x (H)250 x (D)100 mm
Model: 9500BW
Unit weight: 5400g
ACBOX:1100g
Front Panel Colour: Black

Notes: Broadcast-ready version of ARS's genre-defining six-channel mixer, featuring wooden end cheeks to look as good as it sounds. Three-band hybrid iso-EQs, three-band isolator, elite sound quality.

Supplier's Notes:
6 channel table top mixer

MODEL9900BW (broadcast mixer) Music Mixer Wood TYPE (Headphone Monitor Trim: Cue-Mix-Pgm special version)

Pro type (Built-in house XLR output transformer Installed model)

ARS MODEL 9900 DJ Mixer is a Japanese made,6ch. rotary mixer with world's first 3band hybrid isoeq Hi-eq Mid-eq Low -Iso on each channel.

The ARS 9900 is Alpha Recording System's Flagship Table top mixer.

This 6 channel High Quality Rotary DJ Mixer has a 3 band Isolator on the master.

Potentiometer and Switch are ALL ALPS.

A long time in the development phase, this mixer is a beautiful example of Japanese hand made precision workmanship.

Highly recommended.

It is designed with purist ideals with only essential features.

ARS 9900 has 3 band hybrid iso-eq hi-eq mid-eq low-iso on each channel and 3band Iso on the master.

The Master Isolators can be boost of cut from +18db ~ -8.

The Ch hi-eq mid-eq can boost or cut from +12db ~ -12db. LOW-ISO boost of cut from +6db ~ -8.

Each channel has Post Fader Send. also Return and Effect Loop.

* Due to the Model-9900 is designed for a professional use, The body is no power switch to avoid accidentally power off while playing.

* Minimizing the power noise by designing the All circuit board and the power circuit board independently and setting them apart.

Specs

Input

Frequency Response: +-1dB 20Hz-20Khz
Input: 3 x Phono: 47K Ohm / 9 x Line: 20K Ohm
Effect Loop: RCA Unbalanced Impedance 20K Ohm
Return: RCA Unbalanced Impedance 20K Ohm

Output

House Output: RCA Unbalanced Impedance 1K Ohm/ XLR Balanced Impedance 100 Ohm(Built-in house XLR output transformer Installed model)
Booth Output: RCA Unbalanced Impedance 1K Ohm/ XLR Balanced Impedance 100 Ohm
Tape Output: RCA Unbalanced Impedance 1K Ohm

Effect Loop: RCA Unbalanced Impedance 600 Ohm
Effect Return: RCA Unbalanced Impedance 600 Ohm
Send Output: RCA Unbalanced Impedance 600 Ohm
Retrun: RCA Unbalanced Impedance 20K Ohm
Isolator Frequency Response:
3band hybrid isoeq 1-4Ch /Low-ISO /MID-EQ/HI-EQ
Master 3Band Iso: 10 - 300 Hz / 300 - 3000 Hz / 3000 - 20000Hz boost of cut from +18db ~ -8.

Headphone Monitor Trim: Cue-Mix-Pgm
Power Consumption: 30w
Power Requirement: US-115V/EU-230V(Selectable) 50/60Hz
Dimensions: (W)460 x (H)280 x (D)100 mm
Front Panel Colour: Black
Because of natural wood, the grain and colour may differ from the photos.

Notes: For Alpha Recording Systems' 25th birthday, the Model 9500 gets a limited-edition red paint job. Classic four-channel design with three-band EQ and world-class sound. Limited to 100 units worldwide.

Supplier's Notes:
MODEL9500 Music Mixer

4 channel table top mixer

MODEL9500 (broadcast mixer) Music Mixer STD

ARS MODEL 9500 DJ Mixer is a Japanese made, 4ch. rotary mixer with world's first 3band hybrid isoeq Hi-eq Mid-eq Low -Iso on each channel.

This 4 channel High Quality Rotary DJ Mixer has a 3 band Isolator and 5Band Equalizer on the master.

5Band Equalizer Control: 75Hz 300Hz 1Khz 3Khz 10Khz 5Band

Potentiometer and Switch are All ALPS. A long time in the development phase, this mixer is a beautiful example of Japanese hand made precision workmanship.

Highly recommended.

It is designed with purist ideals with only essential features.

ARS 9500 has 3 band hybrid iso-eq hi-eq mid-eq low-iso on each channel and 3band Iso and 5band EQ on the master.

The Master Isolators can be boost of cut from +18db ~ -8.

The Ch hi-eq mid-eq can boost or cut from +12db ~ -12db. LOW-ISO boost of cut from +6db ~ -8.

Each channel has Post Fader Send. also Return and Effect Loop.

* Due to the Model-9500 is designed for a professional use, The body is no power switch to avoid accidentally power off while playing.

* Minimizing the power noise by designing the All circuit board and the power circuit board independently and setting them apart.

Wood is a natural material, so there may be unevenness in the wood grain. Thank you for your understanding.

Specs

Frequency Response: +/-1dB 20Hz-20Khz
Input: 3 x Phono: 47K Ohm / 5 x Line: 20K Ohm
House Output: RCA Unbalanced Impedance 600 Ohm/ XLR Balanced Impedance 50 Ohm
Booth Output: RCA Unbalanced Impedance 600 Ohm/ XLR Balanced Impedance 50 Ohm
Effect Loop: RCA Unbalanced Impedance 20K Ohm
Effect Loop Output: RCA Unbalanced Impedance 600 Ohm
Send Output: RCA Unbalanced Impedance 600 Ohm
Return: RCA Unbalanced Impedance 20K Ohm
Isolator Frequency Response:
3band hybrid isoeq 1-4Ch /Low-ISO /MID-EQ/HI-EQ
Master 3Band Iso: 10 - 300 Hz / 300 - 3000 Hz / 3000 - 20000Hz boost of cut from +18db ~ -8.
5Band Equalizer Control: 75Hz 300Hz 1Khz 3Khz 10Khz 5Band

Headphone Monitor Trim: Cue-Mix-Pgm
Power Consumption: 30w
Power Requirement: US-115V/EU-230V(Selectable)
Dimensions: (W)366 x (H)250 x (D)100 mm
model9500BW Unit weight:5400g
AC BOX:1100g
Front Panel Colour: Red

Notes: Wooden side panel version of ARS's brilliant Model9500 mixer. Four-channel rotary design with unique three-band hybrid iso-EQ plus three-band isolator and five-band master EQ.

Supplier's Notes:
MODEL9500BW Music Mixer

4-channel table top mixer

MODEL9500BW (broadcast mixer) Music Mixer Wood TYPE

ARS MODEL 9500BW DJ Mixer is a Japanese made, 4ch. rotary mixer with world's first?3band hybrid isoeq Hi-eq Mid-eq Low -Iso on each channel.

This 4 channel High Quality Rotary DJ Mixer has a 3 band Isolator and 5Band Equalizer on the master.

5Band Equalizer Control: 75Hz 300Hz 1Khz 3Khz 10Khz 5Band

Potentiometer and Switch are All ALPS .

A long time in the development phase this mixer is a beautiful example of Japanese hand made precision workmanship.

Highly recommended.

It is designed with purist ideals with only essential features.

ARS 9500 has 3 band hybrid iso-eq hi-eq mid-eq low-iso on each channel and 3band Iso and 5band EQ on the master.

The Master Isolators can be boost of cut from +18db ~ .

The Ch hi-eq mid-eq can boost or cut from +12db ~ -12db. LOW-ISO boost of cut from +6db ~ .

Each channel has Post Fader Send. also Return and Effect Loop.

* Due to the Model-9500 is designed for a professional use, The body is no power switch to avoid accidentally power off while playing.

* Minimizing the power noise by designing the All circuit board and the power circuit board independently and setting them apart.

Wood is a natural material, so there may be unevenness in the wood grain. Thank you for your understanding.

Specs

Frequency Response: +/-1dB 20Hz-20Khz
Input: 3 x Phono: 47K Ohm / 5 x Line: 20K Ohm
House Output :RCA Unbalanced Impedance 600 Ohm/ XLR Balanced Impedance 50 Ohm
Booth Output: RCA Unbalanced Impedance 600 Ohm/ XLR Balanced Impedance 50 Ohm
Effect Loop: RCA Unbalanced Impedance 20K Ohm
Effect Loop Output: RCA Unbalanced Impedance 600 Ohm
Send Output: RCA Unbalanced Impedance 600 Ohm
Return: RCA Unbalanced Impedance 20K Ohm

Isolator Frequency Response:
3band hybrid isoeq 1-4Ch /Low-ISO /MID-EQ/HI-EQ
Master 3Band Iso: 10 - 300 Hz / 300 - 3000 Hz / 3000 - 20000Hz boost of cut from +18db ~.
5Band Equalizer Control: 75Hz 300Hz 1Khz 3Khz 10Khz 5Band

Headphone Monitor Trim: Cue-Mix-Pgm
Power Consumption: 30w
Power Requirement: US-115V/EU-230V(Selectable)
Dimensions: (W)366 x (H)250 x (D)100 mm (WOOD 20MM Thickness)
Model: 9500BW
Unit weight:5400g
ACBOX:1100g
Front Panel Colour: Black

Notes: ARS's four-channel Model9100 gets the red makeover to celebrate the brand's 25th birthday. Same beautiful audiophile design with three-band hybrid iso-EQ, master isolator and post-fader aux sends.

Supplier's Notes:
MODEL9100B RED Music Mixer

4 channel table top mixer

MODEL9100B RED LE(broadcast mixer) Music Mixer
ARS Anniversary limited edition red face model
(Headphone Monitor Trim: Cue-Mix-Pgm special version)

ARS MODEL 9100B DJ Mixer is a Japanese made, 4ch. rotary mixer with world's first 3band hybrid isoeq Hi-eq Mid-eq Low -Iso on each channel.

This 4 channel High Quality Rotary DJ Mixer has a 3 band Isolator on the master.

Potentiometer and Switch are All ALPS.

A long time in the development phase, this mixer is a beautiful example of Japanese hand-made precision workmanship.

Highly recommended.

It is designed with purist ideals with only essential features.

ARS 9100 has 3 band hybrid iso-eq hi-eq mid-eq low-iso on each channel and 3band Iso on the master. The Master Isolators can be boost of cut from +18db ~ -8. The Ch hi-eq mid-eq can boost or cut from +12db ~ -12db. LOW-ISO boost of cut from +6db ~ -8. Each channel has Post Fader Send. also Return and Effect Loop.

* Due to the Model-9100 is designed for a professional use, The body is no power switch to avoid accidentally power off while playing.

* Minimizing the power noise by designing the All circuit board and the power circuit board independently and setting them apart.

Specs

Frequency Response: +/-1dB 20Hz-20Khz
Input: 3 x Phono: 47K Ohm / 5 x Line: 20K Ohm
House Output: RCA Unbalanced Impedance 600 Ohm/ XLR Balanced Impedance 50 Ohm
Booth Output: RCA Unbalanced Impedance 600 Ohm/ XLR Balanced Impedance 50 Ohm
Effect Loop: RCA Unbalanced Impedance 20K Ohm
Effect Loop Output: RCA Unbalanced Impedance 600 Ohm
Send Output: RCA Unbalanced Impedance 600 Ohm
Return: RCA Unbalanced Impedance 20K Ohm
Isolator Frequency Response:
3band hybrid isoeq 1-4Ch /Low-ISO /MID-EQ/HI-EQ
Master 3Band Iso: 10 - 300 Hz / 300 - 3000 Hz / 3000 - 20000Hz boost of cut from +18db ~ -8.

Headphone Monitor Trim: Cue-Mix-Pgm
Power Consumption: 25w
Power Requirement: US-115V/EU-230V(Selectable)
Dimensions: (W)306 x (H)250 x (D)100 mm
model9100BW Unit weight:4700g
ACBOX: 1100g
Front Panel Colour: Red

Notes: Celebrating a quarter of a century for ARS, the Model 1100 gets a red makeover. Same two-channel design with elite audiophile quality. Limited to 50 units worldwide.

Supplier's Notes:
MODEL1100 RED LE Music Mixer

2 channel table top mixer

MODEL1100 RED LE(broadcast mixer) Music Mixer
ARS Anniversary limited edition red face model

ARS MODEL 1100 DJ Mixer is a Japanese made, 4ch. rotary mixer with world's first 3band hybrid isoeq Hi-eq Mid-eq Low -Iso on each channel.

This 4 channel High Quality Rotary DJ Mixer has a 3 band Isolator on the master. Potentiometer and Switch are All ALPS .
A long time in the development phase, this mixer is a beautiful example of Japanese hand made precision workmanship.

Highly recommended.


It is designed with purist ideals with only essential features.

ARS 1100 has 3 band hybrid iso-eq hi-eq mid-eq low-iso on each channel and 3band Iso on the master.

The Master Isolators can be boost of cut from +18db ~ -8.

The Ch hi-eq mid-eq can boost or cut from +12db ~ -12db. LOW-ISO boost of cut from +6db ~ -8.

Each channel has Post Fader Send. also Return and Effect Loop.

* Due to the Model-1100 is designed for a professional use, The body is no power switch to avoid accidentally power off while playing.

* Minimizing the power noise by designing the All circuit board and the power circuit board independently and setting them apart.

Specs

Frequency Response: +/-1dB 20Hz-20Khz
Input: 2 x Phono: 47K Ohm /2 x Line: 20K Ohm
House Output: RCA Unbalanced Impedance 600 Ohm/ XLR Balanced Impedance 50 Ohm
Booth Output: RCA Unbalanced Impedance 600 Ohm/ XLR Balanced Impedance 50 Ohm
Effect Loop: RCA Unbalanced Impedance 20K Ohm
Effect Loop Output: RCA Unbalanced Impedance 600 Ohm
Send Output: RCA Unbalanced Impedance 600 Ohm
Return: RCA Unbalanced Impedance 20K Ohm
Isolator Frequency Response:
3band hybrid isoeq 1-2Ch /Low-ISO /MID-EQ/HI-EQ
Master 3Band Iso: 10 - 300 Hz / 300 - 3000 Hz / 3000 - 20000Hz boost of cut from +18db ~ -8.


Headphone Monitor Trim: Cue-Mix-Pgm
Power Consumption: 20w
Power Requirement: US-115V/EU-230V(Selectable)
Dimensions: (W)220 x (H)250 x (D)100 mm
Front Panel Colour: Red

Notes: High-end standalone system from Denon. Four-deck design with 10.1-inch touchscreen, Serato and Virtual DJ support and top-quality sound. All powered by Denon's excellent Engine DJ OS.

Update September 2023: Serato is introducing plug-and-play support from Serato DJ Pro for the Denon DJ PRIME 4+. Along with the update, excitingly, customers get to unlock this subscription for free; no cost involved!

Supplier's Notes:
Prime 4+

The world's most advanced DJ system just got even better

*** Update March 2024- Engine DJ 3.4 Performance Software for Hardware (OS) ***

New Features
Bluetooth Audio Input and Keyboard Connection for Supported Devices

Bluetooth Audio Input - Wirelessly play audio from a Bluetooth-capable device on your supported Engine DJ hardware

Assign to any individual hardware channel or main audio output
Assign to layer A or B on the Denon DJ SC6000 and SC6000M
Bluetooth transport controls allow you to play, pause, and track skip using the touch screen or hardware controls when connected to a capable Bluetooth device
Hardware screen displays Track Title, Artist, and track progress when connected to a capable Bluetooth device

Bluetooth Keyboard Support - Search for songs on your Engine DJ hardware more quickly and efficiently
Bluetooth menu option in the Control Center allows you to connect and manage Bluetooth keyboards and audio devices

Additional Bluetooth Compatibility Information

It is recommended that you confirm the Bluetooth connectivity and functionality of your computer, smartphone, or other device before using it in a live situation

Not all Bluetooth devices and audio applications provide support for Bluetooth Transport controls and track information

Track Progress is not updated on Engine OS when it is adjusted using the originating software/app

Engine DJ Preparation Software (Desktop)
Improvements and Fixes

Fixed an issue where sync manager export would take longer if SoundSwitch content is being packed

Fixed an issue where tracks would not pack via drag and drop if there are 2 drives with the same or similar names connected

Various other stability enhancements and improvements


Proven performance, elevated

The PRIME 4+ brings a fresh new look and next-level features to the legendary proven performance power of the PRIME 4. The world's most powerful, advanced standalone DJ system is now better than ever with a new refined look, unrivalled streaming music accessibility, new dynamic FX options, 10% larger jog wheel surface, and the ever-expanding performance features of Engine DJ including the industry's first standalone Stem separation (Stems beta starts summer 2023).

Designed for the working DJ

Made by working DJs, for working DJs. The PRIME 4 + combines the powerful creative possibilities of 4 standalone decks with unmatched professional features and rugged build quality to ensure solid DJ performances night after night and gig after gig. The 2 independent microphone mixer sections ensure that you and your MC or guests always sound their absolute best, thanks to dedicated EQ, volume, and FX controls and automatic talkover options. While commanding the main dancefloor, you can also send a secondary mix or playlist to a separate lounge or cocktail area using the Independent Zone Output, upping your flexibility and value as a working professional DJ.

Easily handle any request

Confidently approach any event or gig knowing that you are 100% prepared to tackle any guest request. With support for more music streaming partners than anyone else on the market, including Amazon Music Unlimited, the PRIME 4+ allows instant access to over 100 million tracks across all genres. The lightning-fast on-board analysis buffers streaming tracks into internal memory, ensuring uninterrupted playback of streaming tracks from any Wi-Fi source or cell phone hotspot.

Enhanced dynamic FX suite

The PRIME 4+ boasts over 25 fully customizable Main FX and 4 dynamic, knob-controlled Sweep FX so that you can unleash your full creative mixing potential. The 2 dedicated Main FX sections feature dedicated OLED displays, knobs, and buttons to dial in and manipulate the frequency, parameters, beat divisions, and wet/dry mix of the selected FX. To add even more drama and excitement to your sound, the 4 Sweep FX can be automatically engaged by turning the Sweep FX knob on each channel and can even be layered with the Main FX for endless immersive FX combinations. The expressive Touch FX transforms the 10.1" touchscreen into an XY controller that puts live FX manipulation literally at your fingertips!

Unparalleled integrated lighting control

Confusing DMX lighting programming and cumbersome controls are now a thing of the past. The Prime 4+ makes it easy to set up and execute an immersive, impressive lighting experience for any event or gig. With the on-board power of Engine Lighting, you have full access to customized or automatic light shows for saved or streaming tracks. Plus, you'll have full control over colour, dimming, chase sequence, moving head position, strobe, blackout, and even on/off control over cold spark fountains, dry ice machines, and haze or fog.

First ever standalone Stems integration

The original PRIME 4 made creative laptop-free DJing a reality. Now, the PRIME 4+ brings the insane creative power of Stems to a standalone DJ controller for the first time ever! Exclusive to the PRIME 4+, the brand-new Stems separation allows you to isolate the vocals or instrumental with the tap of a finger. The power of the multi-core processor of the PRIME 4+ combined with the formidable Engine DJ OS finally makes laptop free on-board Stems analysis a reality! (Stems beta starts summer 2023)

Technical specifications

Connections

Audio Outputs

(2) XLR outputs (master left/right, balanced)
(1) RCA output pair (master left/right, unbalanced)
(2) XLR outputs (booth left/right, balanced)
(2) XLR outputs (zone left/right, balanced)
(1) 1/4" (6.35mm) stereo output (headphones)
(1) 1/8" (3.5mm) stereo output (headphones)

Audio Inputs

(2) RCA input pairs (line-level, unbalanced)
(2) RCA input pairs (phono- or line-level, unbalanced)
(2) XLR+1/4" (6.35mm) input

Other

(4) USB ports (for USB drives, 5V, 1A)
(1) USB port (to computer)
(1) Ethernet port
(1) IEC power cable input

Audio Main Outputs

Frequency Response: 20 Hz - 20 kHz +/- 1 dB
Dynamic Range: > 117 dB (A-weighted)
Signal-to-Noise Ratio: > 93 dB (A-weighted)

Headroom

Line Input: > 15 dB
Mic Inputs: > 20bB
Outputs: > 20 dB
Channel Separation: < -90 dB (1 kHz, unity)

T.H.D.

Line/Phono: < 0.01% (1 kHz, unity)
Microphone: < 0.02% (1 kHz, unity)

Analogue Input

Microphone: -40 dBu (unity) / -60 dBu (minimum)
Line: +15dBV (minimum) / 0dBV (maximum)

Analogue Output

Main, Balanced: +20 dBu (maximum) / +4 dBu (unity)
Main, Unbalanced: +20 dBu (maximum) / 0 dBu (unity)
Zone, Balanced: +24 dBu (maximum) / +4 dBu (unity)
Booth: +24 dBu (maximum) / +4 dBu (unity)
Headphone Output: < 150 mW

Power

Connection: IEC
Voltage: 100-240VAC, 50/60Hz
Consumption: 38W~39W

Dimensions (width x depth x height)

Width x Depth x Height: 28.68 x 19.56 x 4.08" / 5728.47 x 496.82 x 103.63mm

Weight

21.34 lb./ 9.7kg

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Top-of-the-range option from A&H, with a focus on pure analogue sound and ease of use. 4+2 channel design with four-band EQ, built-in soundcard and the brand's trademark Xone filters.

Supplier's notes:
Xone:96. The long-awaited follow-up to a genuine club classic.

A new, uncompromising analogue DJ mixer, destined to be the heart of your creativity, Xone:96 takes the legendary soul of the acclaimed Xone:92 and redelivers it, enhanced, and with state-of-the-art digital connectivity.

It's all here. The huge, detailed, space-shaking analogue sound that only Xone delivers. A refined, precision 4-band EQ. Unrivalled dual Xone:VCF filters with CRUNCH harmonic distortion. And a dual 32-bit USB soundcard (24 Channels @ 96kHz) with Traktor Scratch certification right out of the box.

Xone:96 lets you connect your whole rig, from laptops and turntables, to pedals, synths and drum machines.

Two dedicated FX sends, four stereo input channels (with 4-Band EQ), two stereo input channels with all new 3-Band Parametric EQ + two auxiliary stereo return channels. And a separate master insert for your outboard hardware.

Explore new possibilities with a familiar layout of beautifully tactile controls. And rely on the industrial build quality that exceeds the demands of relentless back-to-back performances, night after night.

Xone96: You mixed. We listened.

Notes: Second-generation version of the updated Technics GR series turntable, now with improved motor control. Black SL-1210 version offers subtle style paired with precise, accurate sound.

Supplier's Notes:
The improved motor-drive circuit centered on the newly developed ?S-Drive (Delta Sigma Drive) thoroughly suppresses any minute vibrations generated from the motor. This is the first stage of Technics' new generation of direct drive turntables that aim for further improvements in sound quality.

Features

New Motor-Drive System, AE-Drive (Delta Sigma Drive)

The AE-Drive is a new system that applies Technics' expertise in PWM signal processing. In addition to reducing high harmonics, the new drive suppresses vibrations from the motor for smoother, more accurate rotation, ensuring a rich reproduction of the music.

The First Stage of The New Generation of Technics' Direct Drive Turntables

Since inventing the world's first direct drive turntable, Technics has continued to work to improve sound quality. It has now developed the ?S-Drive, which suppresses minute vibrations from the motor and improves the electromagnetic conversion accuracy of the cartridge. The first stage of direct drive turntable systems featuring this technology is the SL-1200GR2.

Coreless Direct Drive Motor Achieving Stable Rotation

In 1970, Technics commercialised the world's first direct drive turntable, and the system took the world by storm. Unlike belt drive and other systems, direct drive systems rotate the motor at low speed and directly drive the platter, thus providing numerous advantages, such as the almost complete absence of degradation in S/N ratio due to motor vibration and deceleration mechanisms, as well as high reliability over a long period time because of not requiring parts replacement.

And in 2016, Technics developed the twin-rotor, surface-facing, coreless direct drive motor with rotor magnets placed on both sides, thereby eliminating the rotation irregularity of the motor, referred to as "cogging," which was a unique issue for direct drive systems. This motor was adopted for the SL-1200G, which once again drew a significant response in the hi-fi market. The SL-1200GR2 inherits the same design philosophy with the new development of a single-rotor, surface-facing, coreless direct drive motor, resulting in the elimination of cogging.

Multi-Stage Silent Power Supply

Low-Noise Switching Circuit

Use of a high-speed switching power supply ensures a stable supply capacity and less ripple and humming. Applying a switching power supply to a turntable eliminates the need for a large transformer and countermeasures for the ensuing mechanical vibrations.

A switching frequency of above 100 kHz limits the impact of noise on the music playback bandwidth.

Current Injection Active Noise Cancelling

This technology combines a noise detection device with an error amplifier. It detects residual noise in the power supply and applies an inverse phase current to remove noise components. It removes low frequency noise more effectively than a regulator to ensure a more ideal power supply.

Pursuing Rigidity and Vibration Damping Characteristics

The platter achieves high rigidity and vibration damping characteristics by using a two-layer construction with deadening rubber applied to the entire rear surface of the aluminium die-cast to eliminate the unnecessary resonance that is otherwise relayed to the record, thereby producing clear sound.

To increase the inertial mass and reduce vibration, the shape of the aluminium die-cast portion was optimized by simulation. At 2.5 kg (including the rubber mat), the SL-1200GR2 platter is 0.8 kg heavier than that of the previous SL-1200MK5. Also, the back surface of the platter has strengthening ribs added to improve rigidity. Increasing the surface area of contact with the deadening rubber achieves damping characteristics that are more than twice those of the SL-1200MK5.

Tonearm Achieving High Initial-Motion Sensitivity

The tonearm tracks the rotation of the record and enables reading with high precision, and the tonearm inherited by Technics is the traditionally used static-balance universal S-shaped tonearm, employing an aluminium pipe with excellent light weight and rigidity for the material of the tonearm pipe.

With its gimbal suspension construction, the tonearm bearing section uses a cut-processed housing that employs high-precision bearings, as in the SL-1200G and SL-1200GR. The high initial-motion sensitivity of 5 mg or less is achieved through manual assembly and adjustment by skilled Japanese artisans. This enables the grooves etched into the records to be accurately traced.

In addition, one type of auxiliary weight comes included, and the cartridge can be swapped with a variety of other cartridges to match the music genre or feeling. (Applicable cartridge weight when using the supplied auxiliary weight: 10 - 16.4 g (not including the supplied head shell)

Specs

Size and Weight

Height: 173mm
Width: 453mm
Depth: 372mm
Weight: 11.5kg
*Approx.

Coreless direct drive motor achieving stable rotation
AE-Drive suppresses vibrations from the motor for smoother, more accurate rotation
Low-noise, low-voltage power circuit and a switching power supply
Two-layer platter with high rigidity and vibration damping
Tonearm achieving high initial-motion sensitivity
High-rigidity body and high-damping silicon insulators for smooth sound and isolation from various vibrations

Turntable Section

Drive Method: Direct Drive
Motor: Brushless DC motor
Turntable Speeds: 33-1/3, 45 and 78 rpm
Pitch Adjustment Range: +/-8% and +/-16%
Starting Torque: 2.2 kg/cm
Build-up Characteristics: 0.7 s. from standstill to 33- 1/3 rpm
Braking system: Electronic brake
Wow and Flutter: 0.025%?W.R.M.S.
Turntable Platter: Aluminium diecast
Diameter: 332mm
Weight: Approx. 2.5kg (Including a rubber sheet)

Tonearm Section
Type: Static Balance
Effective Length: 230mm
Overhang: 15mm

Tracking Error Angle
Within 2- 32' (at the outer groove of 30cm(12") record)
Within 0- 32' (at the inner groove of 30cm(12") record)
Offset Angle: 22-
Arm Height Adjustment Range: 0 - 6mm
Stylus Pressure Adjustment Range: 0 - 4g (Direct Reading)
Headshell weight: Approx. 7.6g

Applicable Cartridge Weight Range (without auxiliary weight): 5.6 - 12.0g
3.1 - 9.5g (using cartridge spacer)
14.3 - 20.7g (including head shell)
(with auxiliary weight) 10.0 - 16.4g
7.5 - 13.9g (using cartridge spacer)
18.7 - 25.1g (including head shell)

Cartridge Mounting Dimension: 12.7 mm (1/2") interval
Head Shell Terminal Lug: 1.2mm 4-pin terminal lug

Terminals

Audio Output
PHONO (Pin Jack) x 1
EARTH TERMINAL x 1

General

Power Supply: AC220-240 V, 50/60 Hz

Power Consumption
11 W (ON)
0.3 W (OFF)
Dimensions (W x H x D): 453 x 173 x 372 mm
Weight: Approx. 11.5kg
Operating temperature range: 0C to +40C
Operating humidity range: 35% to 80% RH (no condensation)

Accessories: Turntable, Turntable sheet, Dust cover, EP record adaptor, Balance weight, Auxiliary weight, Cartridge spacer, Head shell, Overhang gauge, Screw set for cartridge, PHONO cable, PHONO earth lead, AC power supply cord, Owner's Manual

Notes: Silver version of the second-generation Technics GR series turntable. Upgraded Delta-Sigma Motor Drive gives unparalleled stability and top-notch sound quality.

Supplier's Notes:
The improved motor-drive circuit centered on the newly developed ?S-Drive (Delta Sigma Drive) thoroughly suppresses any minute vibrations generated from the motor. This is the first stage of Technics' new generation of direct drive turntables that aim for further improvements in sound quality.

Features

New Motor-Drive System, AE-Drive (Delta Sigma Drive)

The AE-Drive is a new system that applies Technics' expertise in PWM signal processing. In addition to reducing high harmonics, the new drive suppresses vibrations from the motor for smoother, more accurate rotation, ensuring a rich reproduction of the music.

The First Stage of The New Generation of Technics' Direct Drive Turntables

Since inventing the world's first direct drive turntable, Technics has continued to work to improve sound quality. It has now developed the AE-Drive, which suppresses minute vibrations from the motor and improves the electromagnetic conversion accuracy of the cartridge. The first stage of direct drive turntable systems featuring this technology is the SL-1200GR2.

Coreless Direct Drive Motor Achieving Stable Rotation

In 1970, Technics commercialised the world's first direct drive turntable, and the system took the world by storm. Unlike belt drive and other systems, direct drive systems rotate the motor at low speed and directly drive the platter, thus providing numerous advantages, such as the almost complete absence of degradation in S/N ratio due to motor vibration and deceleration mechanisms, as well as high reliability over a long period time because of not requiring parts replacement.

And in 2016, Technics developed the twin-rotor, surface-facing, coreless direct drive motor with rotor magnets placed on both sides, thereby eliminating the rotation irregularity of the motor, referred to as "cogging," which was a unique issue for direct drive systems. This motor was adopted for the SL-1200G, which once again drew a significant response in the hi-fi market. The SL-1200GR2 inherits the same design philosophy with the new development of a single-rotor, surface-facing, coreless direct drive motor, resulting in the elimination of cogging.

Multi-Stage Silent Power Supply

Low-Noise Switching Circuit

Use of a high-speed switching power supply ensures a stable supply capacity and less ripple and humming. Applying a switching power supply to a turntable eliminates the need for a large transformer and countermeasures for the ensuing mechanical vibrations.
A switching frequency of above 100 kHz limits the impact of noise on the music playback bandwidth.

Current Injection Active Noise Cancelling

This technology combines a noise detection device with an error amplifier. It detects residual noise in the power supply and applies an inverse phase current to remove noise components. It removes low frequency noise more effectively than a regulator to ensure a more ideal power supply.

Pursuing Rigidity and Vibration Damping Characteristics

The platter achieves high rigidity and vibration damping characteristics by using a two-layer construction with deadening rubber applied to the entire rear surface of the aluminium die-cast to eliminate the unnecessary resonance that is otherwise relayed to the record, thereby producing clear sound.

To increase the inertial mass and reduce vibration, the shape of the aluminium die-cast portion was optimized by simulation. At 2.5 kg (including the rubber mat), the SL-1200GR2 platter is 0.8 kg heavier than that of the previous SL-1200MK5. Also, the back surface of the platter has strengthening ribs added to improve rigidity. Increasing the surface area of contact with the deadening rubber achieves damping characteristics that are more than twice those of the SL-1200MK5.

Tonearm Achieving High Initial-Motion Sensitivity

The tonearm tracks the rotation of the record and enables reading with high precision, and the tonearm inherited by Technics is the traditionally used static-balance universal S-shaped tonearm, employing an aluminium pipe with excellent light weight and rigidity for the material of the tonearm pipe.

With its gimbal suspension construction, the tonearm bearing section uses a cut-processed housing that employs high-precision bearings, as in the SL-1200G and SL-1200GR. The high initial-motion sensitivity of 5 mg or less is achieved through manual assembly and adjustment by skilled Japanese artisans. This enables the grooves etched into the records to be accurately traced.

In addition, one type of auxiliary weight comes included, and the cartridge can be swapped with a variety of other cartridges to match the music genre or feeling. (Applicable cartridge weight when using the supplied auxiliary weight: 10 - 16.4 g (not including the supplied head shell))

Turntable Section

Drive Method: Direct Drive
Motor: Brushless DC motor
Turntable Speeds: 33-1/3, 45 and 78 rpm
Pitch Adjustment Range: +/-8% and +/-16%
Starting Torque: 2.2 kg cm
Build-up Characteristics: 0.7 s. from standstill to 33- 1/3 rpm
Braking system: Electronic brake
Wow and Flutter: 0.025%? W.R.M.S.

Turntable Platter
Aluminum diecast
Diameter: 332mm
Weight: Approx. 2.5kg (Including a rubber sheet)

Tonearm Section

Type: Static Balance
Effective Length: 230mm
Overhang: 15mm

Tracking Error Angle
Within 2- 32' (at the outer groove of 30cm(12") record)
Within 0- 32' (at the inner groove of 30cm(12") record)

Offset Angle: 22-
Arm Height Adjustment Range: 0 - 6mm
Stylus Pressure Adjustment Range: 0 - 4g (Direct Reading)
Headshell weight: Approx. 7.6g
Applicable Cartridge Weight Range
(without auxiliary weight): 5.6 - 12.0g
3.1 - 9.5g (using cartridge spacer)
14.3 - 20.7g (including head shell)
(with auxiliary weight): 10.0 - 16.4g
7.5 - 13.9g (using cartridge spacer)
18.7 - 25.1g (including head shell)

Cartridge Mounting Dimension: 12.7 mm (1/2") interval
Head Shell Terminal Lug: 1.2mm? 4-pin terminal lug

Terminals

Audio Output: PHONO (Pin Jack) x 1, EARTH TERMINAL x 1

General

Power Supply: AC220-240 V, 50/60 Hz
Power Consumption: 11 W (ON), 0.3 W (OFF)
Dimensions (W x H x D): 453 x 173 x 372 mm
Weight: Approx. 11.5kg
Operating temperature range: 0C to +40C
Operating humidity range: 35% to 80% RH (no condensation)
Accessories: Turntable, Turntable sheet, Dust cover, EP record adaptor, Balance weight, Auxiliary weight, Cartridge spacer, Head shell, Overhang gauge, Screw set for cartridge, PHONO cable, PHONO earth lead, AC power supply cord,
Owner's Manual

Notes: All-in-one wireless controller from Pioneer's parent company. A fresh new take on DJ units, featuring a two-deck setup with large touchscreen, up to five hours' playback from the internal battery. A flexible, portable option for all DJs.

Supplier's Notes:
Portability and playability

Easily carry the OMNIS-DUO anywhere thanks to its compact size, modest weight, and rounded corners. The system's 2-deck + mixer layout feels great for DJing, and there are 2 modes for the touchscreen - Light and Dark - so you'll always see the displayed information, even in bright outdoor settings.

Bluetooth audio input

Invite a friend to connect their phone to the OMNIS-DUO via Bluetooth and you can drop their favourite track into your set. With the Bluetooth Playback function, you'll have control of the audio on the deck. So, you can adjust the volume and EQ, apply effects to the sound, change the tempo, use Hot Cues, and scratch.

5-hour battery

Play for up to 5 hours without plugging into the mains. You can also connect the AC adapter or plug in a compatible power bank (45W or more) to the dedicated USB Type-C terminal. And if you combine the OMNIS-DUO with the battery-powered WAVE-EIGHT speaker, which features ultra-low-latency SonicLink technology, you can enjoy wireless DJing for total freedom.

Support for multiple music sources

USB Type-A drives and SD cards can be plugged straight into the OMNIS-DUO, as well as a PC/Mac via the USB Type-C terminal for use with rekordbox Performance mode. The Wi-Fi function offers easy access to tracks on a PC/Mac, smartphone, or the cloud without a wired connection.

Flexible audio output options

There's no limit to the places you can hold a party, thanks to the Bluetooth audio output function. And when the time comes to play in a venue like a bar, you can use the professional XLR output, while the RCA terminals are perfect for plugging in monitor speakers at home.

Brand-new design

The OMNIS-DUO looks at home everywhere you take it - from professional events to spontaneous outdoor parties. Its new indigo colour is inspired by denim jeans, a classic and hugely versatile fashion item, and the unique curves of the unit create a sleek silhouette.

Specifications

Frequency Response: 20 Hz - 20 kHz
S/N Ratio: 112 dB (USB, SD)
Total Harmonic Distortion: <0.003% (USB, SD)
Battery Section Capacity: 47.52 Wh (Built-in rechargeable lithium-ion battery)
Play time: Approx. 5 hours
Charge time: Approx. 3 hours
Inputs: 2 MIC (1x XLR & 1/4" TRS Jack, 1x 1/4" TRS Jack), 1 LINE (Bluetooth [exclusive from output])
Outputs: 1 MASTER (XLR), 1 MASTER (RCA), 1 MASTER (Bluetooth [exclusive from input]), 1 BOOTH (Combined use with RCA output), 2 HEADPHONE MONITOR (1/4" Stereo Phone Jack, 3.5 mm Stereo Mini Jack)
USB: USB-A for thumb drive x 1, SD card x1, USB-C for PC/Mac control x 1 USB-C for power input (USB PD 45W) x 1
Maximum Dimensions (WxDxH): 500 × 307 × 71 mm / 19.7" x 12.1" x 2.8"
Weight: 4.6 kg / 10.1 lbs.

Wireless LAN section

Supported standards: IEEE 802.11 a/b/g/n/ac
Frequency band used: 2.4 GHz / 5 GHz

Bluetooth section

Wireless system Bluetooth: Ver.5.2
Frequency band used: 2.4 GHz
Compatible codecs: SBC, AAC

Notes: A proper bargain here. Ecler's flagship rotary mixer offers all the benefits of audiophile sound quality and organic, hands-on control at a surprisingly low price point.

Supplier's Notes:
WARM4 is a professional four channel analogue rotary DJ mixer, designed and manufactured by ECLER in Barcelona. Featuring 4 phono/line channels, 2 MIC inputs, classic sharp filters and a 4th order Isolator. WARM4 includes an unique feature, an Analogue Subharmonic Synthesizer selectable per channel, specially designed to generate and reinforce ultra-low frequencies.

Applications

Night Clubs
DJ studios
Itinerant DJ performances

Audio performances

Inputs:

Number of Inputs:
LINE: 4 Stereo Unbalanced Inputs
PHONO: 4 Stereo Unbalanced Inputs
MICRO: 2 Mono Balanced Inputs
FX RETURN: 1 Stereo Unbalanced Input

Connectors type:
LINE 1-2-3-4: RCA STEREO
PHONO 1-2-3-4: RCA STEREO
MICRO 3: XLR3-F
MICRO 4: Combo XLR3F-6.3mm TRS BAL
FX RETURN: RCA STEREO

Inputs Sensitivity nom/Impedance:
LINE: 0dBV/50kO
PHONO: -40dBV/50kO
MICRO: -50dBV/>1kO
FX RETURN: 0dBV/>6kO

PERFORMANCE:

Frequency Response:
LINE: 10Hz#30kHz -1dB
MICRO: 10Hz#25kHz -1dB
PHONO: RIAA i0.5dB
FX RETURN: 10Hz#50kHz -1dB

THD+N:
LINE: <0.004%
MICRO: <0.7%
PHONO: <0.06%
FX RETURN: <0.001%

CMMR:
MICRO: >75dB @ 1kHz

Signal Noise Ratio:
LINE: >105dB
MICRO: >90dB
PHONO: >100dB
FX RETURN: >110dB

Trim control / Tone control Inputs 1-2-3-4:
INPUTS 1-2-3-4: i 15dB
BASS: +10/-30dB
MID: +10/-25dB
TREBLE: +10/-30dB

Trim control / Tone control Isolator:
BASS: +12/-70dB
MID: +12/-40dB
TREBLE: +12/-70dB

Tone Filter cut frequency at -6dB (slope 12dB/oct):
BASS: 200Hz
MID: 200Hz#6.8kHz
TREBLE: 6.8kHz

Isolator cut frequency at -6dB (slope 24dB/oct):
BASS: 300Hz#4kHz
TREBLE: 4kHz

Analogue Subharmonic Synthesizer:
Input selective filter: 50#120Hz
Harmonics synthesis: 25#60Hz
Max Output level: +12dBV

OUTPUTS:

Number of Outputs:
HOUSE: 1 Stereo Balanced Outputs / 1 Stereo Unbalanced Outputs
BOOTH: 1 Stereo Balanced Outputs / 1 Stereo Unbalanced Outputs
HEADPHONE: 2 Stereo Unbalanced Outputs
FX SEND: 1 Stereo Unbalanced
REC: 1 Stereo Unbalanced

Connectors Type:
HOUSE: XLR3-M STEREO / RCA STEREO
BOOTH: XLR3-M STEREO / RCA STEREO
HEADPHONE: Jack Stereo 6.3mm / Jack Stereo 3.5mm
FX SEND: RCA STEREO
REC: RCA STEREO

Outputs Level/Minimum Load:
HOUSE (BAL): 0dBV/600O 1V *(+12dB 4V)
HOUSE (UNBAL): 0dBV/2.2kO 1V *(+12dB 4V)
BOOTH (BAL): 0dBV/2.2kO 1V *(+12dB 4V)
BOOTH (UNBAL): 0dBV/2.2kO 1V *(+12dB 4V)
REC: 0dBV/10kO
HEADPHONES: 200mO/200O THD 1%
FX SEND: 0dBV/2.2kO

Max Undistorted Output Level:
HOUSE (Electr.BAL): 21dBV (23dBu)
BOOTH (Electr.BAL): 21dBV (23dBu)
HOUSE (UNBAL): 21dBV (23dBu)
BOOTH (UNBAL): 21dBV (23dBu)

MICELLANEOUS
Control Mode: Rotary with Alps Blue Velvet Potentiometers and Alps RK09L potentiometers
Phantom Voltage: 18VDC/5mA Max (Default ON)
Input VU-Meter: LED 12 segments (-38dBV # +10dBV)
House-Mix-Booth VU-Meter: LED 12 segments (-30dBV # +20dBV)
Subharmonic Output VU-Meter: LED 3 Segments (-20dBV / 0dBV / +4dBV)

ELECTRICAL

Power Supply: Internal
AC Mains Voltage: 90-264VAC 47-63Hz
AC Main Connector: 15A IEC inlet connector
Rated power consumption: 39 VA

PHYSICAL
Operating Temperature: -5-C # 45-C / 23-F # 113-F
Operating Humidity: 20 - 90% RH (no condensation)
Storage Temperature: -10-C # 50-C / 14-F # 122-F
Storage Humidit : <90% RH (no condensation)
Operating Humidity: 20 - 90% RH (no condensation)
Installation Options: Desktop or Rack mount with optional accessories
Included Accessories: IEC Cable EU
Dimensions (WxHxD): 34.0 x 8.1 x 37.2 cm / 13.39 x 3.19 x 14.65 in
Weight: 5.32 Kg / 11.73 lb
Shipping Dimensions (WxHxD): 49.5 x 17.5 x 43.5 cm / 19.49 x 6.89 x 17.13 in
Shipping Weight: 6.74 Kg / 14.86 lb

MECHANICAL

Dimensions (without wooden sides) : 400 x 185 x 100mm / 15.7" x 7.2" x 3.9"
Weight : 3.6Kg / 7.94 lbs

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


A proper bargain here. Ecler's flagship rotary mixer offers all the benefits of audiophile sound quality and organic, hands-on control at a surprisingly low price point.

Supplier's Notes:
WARM4 is a professional four channel analogue rotary DJ mixer, designed and manufactured by ECLER in Barcelona. Featuring 4 phono/line channels, 2 MIC inputs, classic sharp filters and a 4th order Isolator. WARM4 includes an unique feature, an Analogue Subharmonic Synthesizer selectable per channel, specially designed to generate and reinforce ultra-low frequencies.

Applications

Night Clubs
DJ studios
Itinerant DJ performances

Audio performances

Inputs:

Number of Inputs:
LINE: 4 Stereo Unbalanced Inputs
PHONO: 4 Stereo Unbalanced Inputs
MICRO: 2 Mono Balanced Inputs
FX RETURN: 1 Stereo Unbalanced Input

Connectors type:
LINE 1-2-3-4: RCA STEREO
PHONO 1-2-3-4: RCA STEREO
MICRO 3: XLR3-F
MICRO 4: Combo XLR3F-6.3mm TRS BAL
FX RETURN: RCA STEREO

Inputs Sensitivity nom/Impedance:
LINE: 0dBV/50kO
PHONO: -40dBV/50kO
MICRO: -50dBV/>1kO
FX RETURN: 0dBV/>6kO

PERFORMANCE:

Frequency Response:
LINE: 10Hz#30kHz -1dB
MICRO: 10Hz#25kHz -1dB
PHONO: RIAA i0.5dB
FX RETURN: 10Hz#50kHz -1dB

THD+N:
LINE: <0.004%
MICRO: <0.7%
PHONO: <0.06%
FX RETURN: <0.001%

CMMR:
MICRO: >75dB @ 1kHz

Signal Noise Ratio:
LINE: >105dB
MICRO: >90dB
PHONO: >100dB
FX RETURN: >110dB

Trim control / Tone control Inputs 1-2-3-4:
INPUTS 1-2-3-4: i 15dB
BASS: +10/-30dB
MID: +10/-25dB
TREBLE: +10/-30dB

Trim control / Tone control Isolator:
BASS: +12/-70dB
MID: +12/-40dB
TREBLE: +12/-70dB

Tone Filter cut frequency at -6dB (slope 12dB/oct):
BASS: 200Hz
MID: 200Hz#6.8kHz
TREBLE: 6.8kHz

Isolator cut frequency at -6dB (slope 24dB/oct):
BASS: 300Hz#4kHz
TREBLE: 4kHz

Analogue Subharmonic Synthesizer:
Input selective filter: 50#120Hz
Harmonics synthesis: 25#60Hz
Max Output level: +12dBV

OUTPUTS:

Number of Outputs:
HOUSE: 1 Stereo Balanced Outputs / 1 Stereo Unbalanced Outputs
BOOTH: 1 Stereo Balanced Outputs / 1 Stereo Unbalanced Outputs
HEADPHONE: 2 Stereo Unbalanced Outputs
FX SEND: 1 Stereo Unbalanced
REC: 1 Stereo Unbalanced

Connectors Type:
HOUSE: XLR3-M STEREO / RCA STEREO
BOOTH: XLR3-M STEREO / RCA STEREO
HEADPHONE: Jack Stereo 6.3mm / Jack Stereo 3.5mm
FX SEND: RCA STEREO
REC: RCA STEREO

Outputs Level/Minimum Load:
HOUSE (BAL): 0dBV/600O 1V *(+12dB 4V)
HOUSE (UNBAL): 0dBV/2.2kO 1V *(+12dB 4V)
BOOTH (BAL): 0dBV/2.2kO 1V *(+12dB 4V)
BOOTH (UNBAL): 0dBV/2.2kO 1V *(+12dB 4V)
REC: 0dBV/10kO
HEADPHONES: 200mO/200O THD 1%
FX SEND: 0dBV/2.2kO

Max Undistorted Output Level:
HOUSE (Electr.BAL): 21dBV (23dBu)
BOOTH (Electr.BAL): 21dBV (23dBu)
HOUSE (UNBAL): 21dBV (23dBu)
BOOTH (UNBAL): 21dBV (23dBu)

MICELLANEOUS
Control Mode: Rotary with Alps Blue Velvet Potentiometers and Alps RK09L potentiometers
Phantom Voltage: 18VDC/5mA Max (Default ON)
Input VU-Meter: LED 12 segments (-38dBV # +10dBV)
House-Mix-Booth VU-Meter: LED 12 segments (-30dBV # +20dBV)
Subharmonic Output VU-Meter: LED 3 Segments (-20dBV / 0dBV / +4dBV)

ELECTRICAL

Power Supply: Internal
AC Mains Voltage: 90-264VAC 47-63Hz
AC Main Connector: 15A IEC inlet connector
Rated power consumption: 39 VA

PHYSICAL
Operating Temperature: -5-C # 45-C / 23-F # 113-F
Operating Humidity: 20 - 90% RH (no condensation)
Storage Temperature: -10-C # 50-C / 14-F # 122-F
Storage Humidit : <90% RH (no condensation)
Operating Humidity: 20 - 90% RH (no condensation)
Installation Options: Desktop or Rack mount with optional accessories
Included Accessories: IEC Cable EU
Dimensions (WxHxD): 34.0 x 8.1 x 37.2 cm / 13.39 x 3.19 x 14.65 in
Weight: 5.32 Kg / 11.73 lb
Shipping Dimensions (WxHxD): 49.5 x 17.5 x 43.5 cm / 19.49 x 6.89 x 17.13 in
Shipping Weight: 6.74 Kg / 14.86 lb

MECHANICAL

Dimensions (without wooden sides) : 400 x 185 x 100mm / 15.7" x 7.2" x 3.9"
Weight : 3.6Kg / 7.94 lbs

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Designed for seamless integration with Serato and the Stem-Split feature, the Four is Rane's flagship controller. Clever compatibility options let you add vinyl, CDJs and other controllers like the Rane Twelve or Denon LC6000.

Supplier's Notes:
Designed for creativity, built to last

The FOUR brilliantly combines the latest in performance-focused DJ technology with RANE's tried-and-true build and industry-leading sound quality. The result is a bulletproof, great sounding, feature-packed DJ controller that will unleash exciting new levels of creativity in your DJ sets and livestreams. With never-before-seen features like STEM-SPLIT, Performance Pad OLED displays, and a new dynamic internal FX engine, the FOUR is the world's most advanced 4-channel Stems DJ controller.

Harness the power of Serato stems

RANE and Serato have a long history of creating ground-breaking DJ products together, dating back to the RANE SL1 box in 2004. The RANE FOUR takes this partnership to the next level by melding the industrial-grade build and sound quality of RANE hardware with the powerful new Stems capabilities of Serato DJ software. The result is a next-level DJ controller with unprecedented Serato Stems control. A dedicated Stems Pad Mode, Instrumental and Acapella buttons, and RANE's exclusive STEM-SPLIT feature provide you with the ultimate Stems workflow and experience to fully elevate your creativity as a DJ.

New levels of creative FX

The newly designed internal FX suite features 22 paddle-triggered, fully customizable Main FX and 4 knob-controlled Channel FX for adding flavour and personality to individual Stems elements and tracks. This robust FX suite features traditional FX classics like Reverb and Echo and exhilarating new additions including Scale Down, Recycler, Riser, and more. The Channel FX section offers dynamic, hands-on manipulation of 4 knob-controlled FX including Filter, Filter Roll, Noise, and Flanger. The RANE FOUR also allows you to switch seamless back and forth between the built-in hardware FX and Serato's software FX, providing limitless options for any style of DJing.

Four channels of performance possibility

The 4-channel mixer section features full EQ control and intuitive FX assignment options, plus 2 external Line/Phono inputs for external turntables or decks. The FOUR is DVS-enabled and unlocks both Serato DJ Pro and Serato Pitch 'n Time when connected to laptop running the latest version of Serato. Enhanced Sampler routing options allow you to control the Sampler volume via a dedicated knob, or assign the audio to Channel 4 so that you can layer FX on top of your DJ drops, instruments, and other samples. The quick-access deck selection buttons allow for swiftly switching platter control between software decks, and the FOUR also supports external modular decks like the RANE TWELVE MKII and the Denon DJ LC6000 for a full physical 4-deck mixing experience.

Focus on your performance, not your laptop

The 8 OLED displays above the Performance Pads on each deck offer visual feedback for all pad modes, making it easier than ever to see the function of each pad without having to look at the computer. See Cue, Loop, and Sample names as well as Roll and Loop lengths, beat divisions, Pitch Play tuning, and Stem elements and FX.

The best static platters... ever

The 8.5" capacitive jog wheels were designed to be the smoothest and most accurate static jog wheels available on a DJ controller. A central colour display indicates play head position, BPM, pitch percentage, pitch range, overview waveform with Hot Cue markers, song key, time, loop size, deck selection, Beat Jump length and more.

Trusted Rane quality

The RANE FOUR is the only 4-channel DJ controller built to RANE's rigorous standards. Solid, bulletproof construction, MAG-FOUR crossfader with curve adjustment and channel assignment switches, aluminium FX toggles, and industry-leading sound quality and connections ensure that the RANE FOUR will always perform like a champ, no matter what.

Technical Specifications

Digital Audio

Converters: Cirrus Logic, 24-bit PCM, 48 kHz
Digital Signal Processing: 32-bit, Floating Point, Double precision
Dynamic Range (A-weighted, unity gain): ADC: 113 dB DAC: 113 dB
CD Input to Analog Output: 110 dB
CD Input to USB Output: 113 dB
USB Input to Analog Output: 113 dB

Connections

(2) XLR / 1/4" (6.35 mm) TRS inputs (Mic 1-2)
(2) RCA stereo input pairs (Deck 3-4)
(2) XLR outputs (Main)
(2) 1/4" outputs (Booth)
(1) RCA stereo output pair (Main)
(1) 1/4" (6.35 mm) TRS output (Headphones)
(1) 1/8" (3.5 mm) TRS output (Headphones)
(2) USB Type-B ports
(2) USB Type-B ports

Audio Outputs

Main Outputs (XLR):
Gain Trim: Off to 0 dB
Maximum Output: 8 Vrms
THD+N (20 kHz BW @ 1 kHz): 0.004%
Frequency Response: Flat - 20-20kHz

Main Outputs (RCA stereo pair):
Maximum Output: 4 Vrms
THD+N (20 kHz BW @ 1 kHz): 0.004%
Frequency Response: Flat - 20-20kHz

Booth Outputs (1/4"):
Gain Trim: Off to 0 dB
Maximum Output: 8 Vrms
THD+N (20 kHz BW @ 1 kHz): 0.004%
Frequency Response: Flat - 20-20kHz

Headphone Outputs (1/4"/6.35 mm and 1/8"/3.5 mm TRS):
Maximum Output: 4 Vrms Voltage: (no load)
Output Power: 50 mW (50 ohms)
Dynamic Range (A-weighted): 108 dB

Audio Inputs

Microphone 1/2 (Combo XLR/1/4" [6.35 mm] TRS):
Analog Gain: 25 dB
Maximum Input: 110 mV
Gain Trim: Off to +26 dB (unity at center)
Tone Control: 2-band

Line/Phono Inputs 3/4 (RCA stereo pairs, switchable):

Line: Line
Maximum Input: 4 Vrms
Gain Trim: Off to +12 dB
Tone Control: 3-band, full-cut to +10 dB
THD+N (20 kHz BW @ 1 kHz: 0.004%

Phono: RIAA
RIAA Curve: +/-0.25 dB
Gain (@ 1 kHz): 31.5 dB
Maximum Input (@ 1 kHz): 106 mV
Dynamic Range (A-weighted): 102 dB

Pads: (16) on/off multi-colour back-lit pads (8 per deck, 9 modes each
Wheel Displays: (2) 320 x 240 Colour LCD's
Pad & FX Displays: (9) 128 x 32 Monochrome OLED's
Faders: (1) MAG FOUR tension-adjustable crossfader with contour, (4) Standard channel faders

Power:
Connection: IEC
Voltage: 100-240 V, 50/60 Hz
Consumption: 20 W

Dimensions (width x depth x height):
Dimensions (width x depth x height): 30.8" x 15.9" x 4.2" / 782.32 x 403.8 x 106.6 mm
Weight: 18.25 lbs./8.27 kg

Notes: Designed for Serato and Algoriddim Djay, the long-awaited Mixon 8 Pro is a four-channel hybrid controller with detailed jogwheel displays. Standalone mixer and four FX paddles give versatility for creative mixing.

Supplier's Notes:
Enhanced jog wheels with real-time displays

Boasting sleek, touch-sensitive gun metal platters and high profile rims, the enhanced jog wheel design of the Mixon 8 Pro allows you to control your music precisely. And thanks to the new vivid on-jog displays, DJs are kept well informed with real-time track information, including virtual needle illumination, a playhead position indicator, and track time remaining or elapsed.

Four FX pedals for instant effects

As an industry first, the Mixon 8 Pro features 4 sturdy onboard FX Paddles, providing instant tactile control of all your effects. Each channel also has a 3-band EQ and dedicated sound colour filters to shape your music even more (LPF/HPF).

Stand-alone mixer inside

The powerful inbuilt standalone mixer with independent level meters for inputs and outputs gives you flexible connections to either turntables or media players so you can mix digital and analogue sources simultaneously (2x Phono/4x Line). For even more convenience, you can also route the dual Mic inputs (XLR/Jack) with dedicated talk-over functions into the mixer channels to perfectly EQ your live vocals with onboard controls.

Technical data

In- & outputs: XLR Master-Output, 6.3 mm jack Booth-Output (TRS), RCA Master-Output, 2x RCA-Input (Phono/Line), 2x RCA-Input (Line), 1x Combo-Mic-Input (XLR/jack (TRS)), 1x Mic-Input 6.3 mm jack (TRS), 1x USB-B, 1x USB-C/USB-B, 2x Headphones (6.3 mm/3.5 mm jack)
Dimensions: 657 x 68 x 391 mm
Dimensions docking station: 320 x 9 mm
Weight: 5,7 kg
Minimum system requirements: Please refer to the manufacturer's specifications for the system requirements of your DJ software.
Incl.: Controller, manual, USB cable (USB-A to USB-B), power supply (12V/3A)

Notes: Debut release from Pioneer parent company AlphaTheta, the Wave-Eight offers ultra-low-latency hi-fi sound over wireless SonicLink connection. Up to eight hours operation with built-in battery, waterproof design, and impressive portability thanks to 12.7 kg total weight per unit.

Supplier's Notes:
SonicLink ultra-low-latency wireless technology

Cable-free DJing is possible with the WAVE-EIGHT, thanks to SonicLink. This ultra-low-latency technology wirelessly transmits audio much faster than a Bluetooth connection so only a fraction of a second passes between pressing play on the decks and hearing the track through the speaker.

Switchable sound modes

The WAVE-EIGHT features several modes you can change between with a single switch to create the type of sound you need, including Mono, Stereo, and Subwoofer mode.

Combinable with the OMNIS-DUO

If you combine the WAVE-EIGHT with the OMNIS-DUO portable all-in-one DJ system, which also features battery power, you can play cable-free for total freedom.

Battery power and waterproof design

A full battery charge gives you 8 hours of music on the WAVE-EIGHT. The unit is also waterproof, with an IPX4 rating, so it's ideal for using outdoors.
And there's a USB Type-C port for
charging a phone or other device.

Professional sound quality
With a highly efficient Class D amplifier, a newly developed 8-inch driver, and a Vortex Bass Accelerator which delivers clear and powerful bass, the WAVE-EIGHT will bring the vibes and the punch to your party's sound, even in outdoor settings. To cover larger events and spaces, you can easily add more units to your setup with the SonicLink connection.

Easy portability

The extendable handle, casters, and additional grab handles make it easy to carry the WAVE-EIGHT to any location on your own. There's a pole socket built-in too, so you can mount the speaker on a stand for extra height.

SonicLink ultra-low-latency wireless technology
Combinable with the OMNIS-DUO
Professional sound quality
Switchable sound modes
Battery power
Waterproof design
Easy portability

Dimensions: (W × H × D) 300 × 554 × 337 mm / 11.8" × 21.8" × 13.3?"
Weight: 12.7 kg / 28.0 lbs.
Frequency range: 2.4 GHz (2.4000 GHz - 2.4835 GHz)
EQ modes: Music / Music (Low Cut) / Flat / Flat (Low Cut) / Vocal / Subwoofer (Low Cut mode is intended for use on units that are combined with a WAVE-EIGHT set to Subwoofer mode.)
Battery life / Battery spec: Approximately 8 hours
Internal battery charging time: Approx. 4 hours with power off / Approx. 6 hours with power on
Terminal
Input: XLR/TRS combo jack × 2, 1/4" TRS jack × 1, 3.5 mm stereo mini jack × 1
Output: XLR × 1

Notes: The world's first 100% wireless DJ controller, with built-in speakers and rechargeable battery for unrivalled portability. Stream music directly over Wi-Fi or from USB/SD. Powered by the Engine DJ OS.

*** Update March 2024- Engine DJ 3.4 Performance Software for Hardware (OS) ***

New Features
Bluetooth Audio Input and Keyboard Connection for Supported Devices

Bluetooth Audio Input - Wirelessly play audio from a Bluetooth-capable device on your supported Engine DJ hardware

Assign to any individual hardware channel or main audio output
Assign to layer A or B on the Denon DJ SC6000 and SC6000M
Bluetooth transport controls allow you to play, pause, and track skip using the touch screen or hardware controls when connected to a capable Bluetooth device
Hardware screen displays Track Title, Artist, and track progress when connected to a capable Bluetooth device

Bluetooth Keyboard Support - Search for songs on your Engine DJ hardware more quickly and efficiently
Bluetooth menu option in the Control Center allows you to connect and manage Bluetooth keyboards and audio devices

Additional Bluetooth Compatibility Information

It is recommended that you confirm the Bluetooth connectivity and functionality of your computer, smartphone, or other device before using it in a live situation

Not all Bluetooth devices and audio applications provide support for Bluetooth Transport controls and track information

Track Progress is not updated on Engine OS when it is adjusted using the originating software/app

Engine DJ Preparation Software (Desktop)
Improvements and Fixes

Fixed an issue where sync manager export would take longer if SoundSwitch content is being packed

Fixed an issue where tracks would not pack via drag and drop if there are 2 drives with the same or similar names connected

Various other stability enhancements and improvements

Supplier's Notes:
Mixstream Pro Go

Battery-powered standalone streaming DJ controller with Amazon Music

Instant vibes anywhere

From bedroom to beach and from livestreaming studio to patio party, the Mixstream Pro Go is always ready for action, wherever your vibe-quest takes you. With its built-in rechargeable battery, on-board speakers, Wi-Fi, USB/SD card slots, professional DJ performance essentials, and wireless lighting control, the Mixstream Pro Go is the world's first 100% wireless standalone DJ controller. No longer are you confined to your studio or bedroom, now you can share your mixing skills virtually anywhere. No wires, computers, or existing music library required!

Millions of tracks at your fingertips

The Mixstream Pro Go integrates with Amazon Music Unlimited and other popular streaming services, giving you endless access to over 100 million tracks across all genres. With this unprecedented musical access, you no longer need an established music library to pull up and rock a party or gig. The built-in Wi-Fi and lightning-fast on-board song analysis lets you practice, perform and enjoy music for hours on end. Tracks are analysed for bpm and key as they are loaded and buffered into the internal memory, ensuring uninterrupted playback and flawless performances.

Immersive built-in speakers

The high-quality, built-in speakers of the Mixstream Pro Go make it truly standalone and ready for action, right out of the box. These volume adjustable, custom-tuned drivers produce rich, full sound and are the perfect solution for mixing your music on the go. For active DJs, the built-in speakers are the ultimate, convenient option for practicing, livestreaming, video content creation, and personal monitoring when connected to a larger sound system.

Set your smart home to party mode

The Mixstream Pro Go connects wirelessly to Phillips Hue and Nanoleaf smart home lighting, making it easy to add dynamic visuals to your next party or backyard mix session. Using the built-in Engine Lighting embedded control, connecting to a Philips Hue lighting hub or Nanoleaf system only takes a few taps. Once connected, your indoor and outdoor smart lighting will instantly respond and dance perfectly in time to the rhythm of your music.

Dynamic on-screen lighting controls let you set the visual vibe for any music genre with options for custom colour selection, chase pattern, strobing, and more! The lights even respond to the movements of the crossfader, volume controls, and scratching for an amazing, immersive audio/visual experience!

Powerful pro DJ lighting integration and control

For advanced lighting options and features, professional DJs can pre-analyse their music library with SoundSwitch desktop software, export their library to a USB drive, SD card, or to their Dropbox cloud, and have full control of DMX lighting using the touchscreen of the Mixstream Pro Go. This functionality makes it simple to provide a professional lighting experience at events and gigs without the need to bring along a laptop or DMX controller.

Laptop-free performances on the go

The Mixstream Pro Go features 2 USB inputs and 1 SD card slot for optimum versatility when it comes to music selection and library curation. Quickly prep playlists from Serato, rekordbox, and iTunes using the Engine DJ desktop software, export to a USB drive or SD card, insert the drive in the Mixstream Pro Go, and then perform your entire show in standalone mode. This frees up your laptop to be a dedicated broadcasting device for your next livestreaming session!

Multiple DJ performance options

In addition to being able to DJ in Standalone Mode with Engine DJ OS, the Mixstream Pro Go's Computer Mode allows you to use the device as a DJ software controller for Serato DJ (in upcoming release) and Virtual DJ (Serato DJ Lite is supported for free, a paid license is required for Serato DJ Pro and Virtual DJ). When in Computer Mode, the Mixstream Pro Go's touch screen offers hands-on control over library navigation, song selection, FX control, and more. This incredible flexibility combined with the sweet freedom of being battery-powered opens up an entirely new world of location options for your DJ adventures.

Technical Specifications

Connections

Audio Outputs
(1) XLR output pair (main left/right, balanced)
(1) RCA output pair (main left/right, unbalanced)
(1) 1 1/4" (6.35 mm) stereo output (headphones)
(1) 1/8" (3.5 mm) stereo output (headphones)

Audio Inputs
(1) 1 1/4" (6.35 mm) microphone input

Other
(2) USB port (for USB drives)
(1) USB port (to computer)
(1) SD card slot
(1) power adapter input (for charging and wired use)

Audio

Main Outputs

Frequency Response: 20 Hz - 20 kHz +/- 1 dB
Dynamic Range: > 114 dB (A-weighted)
Signal-to-Noise Ratio: > 94 dB (A-weighted)

Headroom
Mic: > 16 dB
Outputs: > 16 dB

Channel Separation: < -110 dB (1 kHz, unity)

T.H.D.
Line: < 0.01% (1 kHz, unity)
Microphone: < 0.05% (1 kHz, unity)

Speakers
Frequency Response: 20 Hz - 20 kHz +/- 1 dB

Analogue Input
Microphone: -40 dBu (unity) / -60 dBu (minimum)

Analogue Output
Master, Balanced: +20 dBu (maximum) / +4 dBu (unity)
Master, Unbalanced: +16 dBu (maximum) / 0 dBu (unity)
Headphone Output: < 30 mW

Power
Connection: DC, Center Positive
Voltage: 12.0 V 3.0 A
Built-In Rechargeable Battery

Dimensions (width x depth x height)
Width x Depth x Height: 22.3" x 11.2" x 2.9" / 566 x 284 x 74 mm
Weight: 8.11 lbs. / 3.7 kg

Notes: Part of Reloop's hi-fi range, the Turn 5 is a focussed audiophile turntable. No pitch control or other DJ features here, just high-end sound quality thanks to a quartz-controlled direct drive motor and the included Ortofon 2M Red cartridge.

Supplier's notes:
Direct Drive HiFi Turntable System

With TURN 5 Reloop HiFi is launching a quartz-controlled, direct-drive turntable that meets the highest sound requirements. Using their expertise, Reloop have developed a new HiFi turntable, which with its technical sophistication is the best in its class.

Powerful DC motor & low-resonance die-cast platter

The brushless, direct-drive DC motor ensures a powerful drive at a very consistent rotation and the TURN 5 has been produced using die-cast precision manufacturing techniques. A dampening rubber base on the turntable system eliminates any unwanted resonance and the accompanying 5 mm rubber coating also protects against vibrations so that nothing stands in the way of the exceptional sound reproduction.

Static balanced S-tone arm & Hi-tech Ortofon cartridge system

The TURN 5 uses a statically balanced S-shape tone arm. This is supplied, along with the hydraulic lift and an anti-skating setting, with a convenient tone arm height adjustment with locking VTA. This guarantees optimum performance of the cartridge and an accurate reproduction of the recording medium.

The supplied Ortofon 2M Red cartridge is already pre-mounted on a headshell and stands out thanks to its elliptical cut with phenomenal sound quality.

High-quality control elements & connections

The three motor speeds can be selected with convenient controls on the top to 33 1/3, 45 or 78 rpm. This means the TURN 5 can also play back old shellac records with a corresponding mono-system (not included). Next to this is the large start/stop knob. The universal locking mechanism (SME) on the tonearm allows for a quick and easy headshell exchange. Also, with the supplied counterweight a whole range of cartridges can be used as this also supports heavier pick-ups.

On the rear panel of the TURN 5 is a gold-plated phono output pair (RCA) with a separate earth connection to prevent any potential interference. The terminal for all cable connections has been recessed to protect them as much as possible. For a simple exchange, the power cable and the RCA cable can be removed.

Elegant design in a particularly heavy-duty construction

The housing is built on a heavy-duty metal construction with shock-absorbing feet in order to isolate unwanted vibrations as much as possible and reduce ambient noise. The combination of several materials provides additional stiffness to the housing.

With its deep black piano finish, visually the TURN 5 is elegant and timeless. The gold-plated turntable hovers harmoniously above the cover plate and focuses the view on the important thing - the record.

Technical Data

Turntable Section:
Type: Direct Drive Manual Turntable System
Drive: Quartz driven upper-torque direct drive
Motor: 16 pole, 3 phase, brushless DC motor
Turntable Speeds: 3 speeds, fully manual (33 1/3, 45, 78 rpm)
Starting Torque: 4500 g/cm
Start-up time / rpm change: less than 0.2 sec.
Wow and flutter: 0.01% WRMS
S/N Ratio: More than 55 dB (DIN-B)
Brake system: electronic brake
Record weight: recommended 800g

Turntable Platter:
Material: aluminium die-cast
Diameter: 332 mm
Weight: About 1.8 kg (including rubber mat)

Tonearm Section:
Type: Universal Static Balanced S-Shaped
Effective Length: 230 mm
Overhang: 15 mm
Tracking Error Angle: Less than 3 degree
Offset Angle: 22-
Stylus Pressure: 0 - 4 g
Adjustable Tonearm Base (VTA): 0-6 mm
Applicable Cartridge Weight: 3.5~8.5 g (including headshell is 13~18 g)
Anti-Skating Range: 0 - 3 g
Effective tonearm mass: 20 g (incl. headshell)

Terminals:
1x PHONO Out (gold-plated), 1x GND Earth Terminal

General:
Power supply: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)
Power Consumption: 9 W
Dimensions: 458 (W) x 368.3 (D) x 162.4 (H) mm
Weight: approx. 12.8 kg

Notes: ***B-STOCK: Box damaged, product in perfect working order***


Direct Drive HiFi Turntable System

With TURN 5 Reloop HiFi is launching a quartz-controlled, direct-drive turntable that meets the highest sound requirements. Using their expertise, Reloop have developed a new HiFi turntable, which with its technical sophistication is the best in its class.

Powerful DC motor & low-resonance die-cast platter

The brushless, direct-drive DC motor ensures a powerful drive at a very consistent rotation and the TURN 5 has been produced using die-cast precision manufacturing techniques. A dampening rubber base on the turntable system eliminates any unwanted resonance and the accompanying 5 mm rubber coating also protects against vibrations so that nothing stands in the way of the exceptional sound reproduction.

Static balanced S-tone arm & Hi-tech Ortofon cartridge system

The TURN 5 uses a statically balanced S-shape tone arm. This is supplied, along with the hydraulic lift and an anti-skating setting, with a convenient tone arm height adjustment with locking VTA. This guarantees optimum performance of the cartridge and an accurate reproduction of the recording medium.

The supplied Ortofon 2M Red cartridge is already pre-mounted on a headshell and stands out thanks to its elliptical cut with phenomenal sound quality.

High-quality control elements & connections

The three motor speeds can be selected with convenient controls on the top to 33 1/3, 45 or 78 rpm. This means the TURN 5 can also play back old shellac records with a corresponding mono-system (not included). Next to this is the large start/stop knob. The universal locking mechanism (SME) on the tonearm allows for a quick and easy headshell exchange. Also, with the supplied counterweight a whole range of cartridges can be used as this also supports heavier pick-ups.

On the rear panel of the TURN 5 is a gold-plated phono output pair (RCA) with a separate earth connection to prevent any potential interference. The terminal for all cable connections has been recessed to protect them as much as possible. For a simple exchange, the power cable and the RCA cable can be removed.

Elegant design in a particularly heavy-duty construction

The housing is built on a heavy-duty metal construction with shock-absorbing feet in order to isolate unwanted vibrations as much as possible and reduce ambient noise. The combination of several materials provides additional stiffness to the housing.

With its deep black piano finish, visually the TURN 5 is elegant and timeless. The gold-plated turntable hovers harmoniously above the cover plate and focuses the view on the important thing - the record.

Technical Data

Turntable Section:
Type: Direct Drive Manual Turntable System
Drive: Quartz driven upper-torque direct drive
Motor: 16 pole, 3 phase, brushless DC motor
Turntable Speeds: 3 speeds, fully manual (33 1/3, 45, 78 rpm)
Starting Torque: 4500 g/cm
Start-up time / rpm change: less than 0.2 sec.
Wow and flutter: 0.01% WRMS
S/N Ratio: More than 55 dB (DIN-B)
Brake system: electronic brake
Record weight: recommended 800g

Turntable Platter:
Material: aluminium die-cast
Diameter: 332 mm
Weight: About 1.8 kg (including rubber mat)

Tonearm Section:
Type: Universal Static Balanced S-Shaped
Effective Length: 230 mm
Overhang: 15 mm
Tracking Error Angle: Less than 3 degree
Offset Angle: 22-
Stylus Pressure: 0 - 4 g
Adjustable Tonearm Base (VTA): 0-6 mm
Applicable Cartridge Weight: 3.5~8.5 g (including headshell is 13~18 g)
Anti-Skating Range: 0 - 3 g
Effective tonearm mass: 20 g (incl. headshell)

Terminals:
1x PHONO Out (gold-plated), 1x GND Earth Terminal

General:
Power supply: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)
Power Consumption: 9 W
Dimensions: 458 (W) x 368.3 (D) x 162.4 (H) mm
Weight: approx. 12.8 kg

Notes: A premium option from Hercules, the Inpulse T7 is a Serato-compatible controller with motorised platters for 7-inch vinyl. Two-channel design with Serato DJ Lite and Djuced software included.

Supplier's Notes:
Are you an aspiring DJ who wants to start spinning on vinyl? The Hercules DJControl Inpulse T7 is the perfect motorized DJ controller to help you take your first steps towards mastering the art of vinyl turntables! This modern take on a classic tool combines the genuine feeling of real vinyl discs with the benefits of digital technology. With 2 motorized platters for 7" discs that go from 0 to 33? RPM in just a tenth of a second, you can practice DJing on vinyl and experience the authentic feeling of real turntables. The separate vinyl record, slipmat, and platter even allow you to remove the vinyl record, giving you full control of your performance.

Serato

DJControl Inpulse T7 includes the Serato DJ Lite software and all of its features. It's compatible with Serato DJ Pro, so that you can enjoy the maximum number of features.

Beatmatch Guide

The Inpulse T7 features the same built-in beatmatch guides as the rest of Hercules' award-winning DJControl Inpulse line to assist DJs in the art of spinning on motorized platters.

Elevate your controller

DJControl Inpulse T7 is 3.5" / 9 cm tall with its feet extended. Elevate your mixing: run wires underneath and protect the controller from spilled drinks.

Experience the sensation of turntables

DJs can mix, beatmatch or scratch on standard-sized 7" platters that go from 0 to 33? RPM in just a tenth of a second. They can also separate the authentic vinyl discs and felt slipmats from the metal platters for a genuine turntable feeling.

Built-in audio

-2 pairs of Master outputs (speakers): 2 x XLR + 2 x RCA
-2 headphones outputs: 14" / 6.35 mm stereo jack + 1/8" / 3.5 mm stereo mini-jack
-Microphone input: 14" / 6.35 mm jack (balanced)
-Audio resolution: 44.1 kHz / 24-bit

Motorised platters

-33 1/3 RPM motorized metal platters (can switch to 45 RPM in Serato DJ Pro)
-Felt slipmats and vinyl records are held in place by the central axis

Controls

-Per deck: 1 filter knob, 3 EQ knobs, 1 gain knob, 1 volume fader, 1 VU meter

-General:

1 crossfader, master volume knob, microphone volume knob, headphones volume knob, Cue to Mix knob, Master VU meter
Effects rack: 2 x 3 Fx Select buttons

-2 paddles, 1 control knob, Beat -/+ buttons

-Platter with touch detection, 3.9-inch / 10-cm tempo fader, Play/Pause, Cue, Shift, Sync

-8 pads × 8 modes (Hot Cue, Loop, Stems)

-Browser knob, Assistant, Range, Loop, Loop In/Out, Instrumental/Vocal, Pitch Bend << / >>

What's in the box:

Hercules DJControl Inpulse T7
2 x felt slipmats + 2 x 7-inch / 17.8-cm replica vinyl records
Braided USB cable
Power adapter + removable power cable
Quick start guide and warranty information leaflet
DJUCEDr and Serato DJ Lite licenses

Notes: ***B-STOCK: Box opened, missing documentation, product in perfect working order.***


Hands-on controller for DJ software or to expand the power of your Denon players and controllers. Plug into an SC6000 player or similar to add dedicated controls for the second layer. Excellent value.

*** Introducing Engine DJ version 3.0 ***

This product is compatible with Engine DJ 3.0, visit enginedj.com for more info.

Comprising of Desktop and OS platforms, Engine DJ is the world's first, and most advanced, embedded creative platform for DJs.

Internet-ready music streaming

Access premier music streaming services directly on Engine DJ compatible devices via Wi-Fi or wired connection without the need of a computer. Log in to your favourite music streaming service and start playing. Set and recall hot cues and loops as you would with physical media.

Control and sync music with lights

Automatically sync your DJ set with DMX, Nanoleaf and Philips Hue Smart Lights. Simply raise the channel fader and press play to see the automatic and synchronized light show. Get creative by customizing the light show on-the-fly with a variety of touchscreen controls.


Supplier's Notes:
Expand your creativity

Inheriting the same DNA from the ultimate club experience SC6000 PRIME, the Denon DJ LC6000 Prime is the world's most versatile DJ controller. Bringing professional club style layout, design and control to both standalone and laptop-based DJ workflows.

With the same look, design, and feel, as the flagship SC6000 Media Player, the versatile LC6000 gives DJs a professional hardware control for the second dual-layer audio output, unlocking Engine OS powered Media Players' full potential when controlling the secondary layer. Showing its true versatility, the LC6000 Prime is the ultimate DJ Controller for compatible DJ applications, giving DJs professional hardware control in their setup.

The stunning full size 8.5" jog wheel, multi-function performance pads, 100mm dual-precision pitch fader, and navigation control grants the DJ more power and ease to be creative in the mix. Powered and activated with just a single USB connection, the LC6000 Prime gives 'plug and play' a whole new meaning in the DJ booth. Connect one or multiple units to customise your setup and expand your creativity.

Unique power of dual-layer

Denon DJ has the only media player on the market that offers dual-layer playback with independent outputs for each layer. The LC6000 Prime adds physical control over the second layer, making it easier than ever to perform using just one media player.

Professional DJ controller

The LC6000's plug and play connectivity with DJ software, provides the ultimate club experience over one or multiple software decks, further expanding creative possibilities for the professional DJ. Compatible with Virtual DJ, Algoriddim Djay Pro AI & Serato DJ Pro.

8.5" jog wheel

At the heart of the LC6000 Prime is a full size 8.5", capacitive touch jog wheel that features a high-definition central display. This colour display shows track artwork or a custom DJ logo, layered with play head position and other essential performance information.

Expand your creativity

Completing the creative toolset, the LC6000 Prime has 8 robust multi-function performance pads offering Hot Cue, Loop, Roll, and Slicer for enhanced creativity and remixing 'on-the-fly'. Alongside this, the LC6000 has a dedicated loop section and navigation control, giving DJs complete and confident control of their performance.

Technical Specifications:

Platters: 8.5" / 216mm (diameter)
Metal construction with display & capacitive touch
Platter Display: 3.5" / 89mm (diameter)
Full-colour LED-backlit display
Connections: (1) USB Type-B port (for computer/media player connection), (1) DC power adapter input
Power Adapter: 12.0V, 2.0A
Dimensions (width x depth x height): 14.2" x 12.6" x 4.7" / 36 x 32 x 12cm
Weight: 6.24 lbs/2.83kg

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


A premium option from Hercules, the Inpulse T7 is a Serato-compatible controller with motorised platters for 7-inch vinyl. Two-channel design with Serato DJ Lite and Djuced software included.

Supplier's Notes:
Are you an aspiring DJ who wants to start spinning on vinyl? The Hercules DJControl Inpulse T7 is the perfect motorized DJ controller to help you take your first steps towards mastering the art of vinyl turntables! This modern take on a classic tool combines the genuine feeling of real vinyl discs with the benefits of digital technology. With 2 motorized platters for 7" discs that go from 0 to 33? RPM in just a tenth of a second, you can practice DJing on vinyl and experience the authentic feeling of real turntables. The separate vinyl record, slipmat, and platter even allow you to remove the vinyl record, giving you full control of your performance.

Serato

DJControl Inpulse T7 includes the Serato DJ Lite software and all of its features. It's compatible with Serato DJ Pro, so that you can enjoy the maximum number of features.

Beatmatch Guide

The Inpulse T7 features the same built-in beatmatch guides as the rest of Hercules' award-winning DJControl Inpulse line to assist DJs in the art of spinning on motorized platters.

Elevate your controller

DJControl Inpulse T7 is 3.5" / 9 cm tall with its feet extended. Elevate your mixing: run wires underneath and protect the controller from spilled drinks.

Experience the sensation of turntables

DJs can mix, beatmatch or scratch on standard-sized 7" platters that go from 0 to 33? RPM in just a tenth of a second. They can also separate the authentic vinyl discs and felt slipmats from the metal platters for a genuine turntable feeling.

Built-in audio

-2 pairs of Master outputs (speakers): 2 x XLR + 2 x RCA
-2 headphones outputs: 14" / 6.35 mm stereo jack + 1/8" / 3.5 mm stereo mini-jack
-Microphone input: 14" / 6.35 mm jack (balanced)
-Audio resolution: 44.1 kHz / 24-bit

Motorised platters

-33 1/3 RPM motorized metal platters (can switch to 45 RPM in Serato DJ Pro)
-Felt slipmats and vinyl records are held in place by the central axis

Controls

-Per deck: 1 filter knob, 3 EQ knobs, 1 gain knob, 1 volume fader, 1 VU meter

-General:

1 crossfader, master volume knob, microphone volume knob, headphones volume knob, Cue to Mix knob, Master VU meter
Effects rack: 2 x 3 Fx Select buttons

-2 paddles, 1 control knob, Beat -/+ buttons

-Platter with touch detection, 3.9-inch / 10-cm tempo fader, Play/Pause, Cue, Shift, Sync

-8 pads × 8 modes (Hot Cue, Loop, Stems)

-Browser knob, Assistant, Range, Loop, Loop In/Out, Instrumental/Vocal, Pitch Bend << / >>

What's in the box:

Hercules DJControl Inpulse T7
2 x felt slipmats + 2 x 7-inch / 17.8-cm replica vinyl records
Braided USB cable
Power adapter + removable power cable
Quick start guide and warranty information leaflet
DJUCEDr and Serato DJ Lite licenses

Notes: Built with durability and sound quality in mind, the TS12S is Alto's most powerful subwoofer, packing a huge 2500W for professional performance from a manageable 25.9 kg package.

Supplier's Notes:
Rock-Solid Sound from the Bottom, Up

The best performances need the best in sound reinforcement at all ends of the sonic spectrum. For tight, punchy low-end look no further than the Alto Professional TS12S powered subwoofer. When added to your full-range speaker setup, the TS12S subwoofer delivers powerful but controlled low-end presence to your PA configuration for a full and complete listening experience for the modern public music space. With a powered subwoofer, any musical performance will take a giant leap into the realm of tonal balance with the perfect blend of hi, mid, and extended low-end frequencies.

The Most Powerful Subwoofer Yet

Sound reinforcement needs can change from night to night but the best in the business count on reliable power at their disposal whenever it's needed. The TS12S is Alto Professional's most powerful subwoofer yet, packing an incredible 2500 watts of power to make concert halls come alive, night clubs punch and pump, houses of worship lift-up instrumental performances, and more. Thanks to its high-efficiency Class D amplifier, TS12S adds the necessary heft and weight to any public performance for a balanced representation of musical artistry in any environment.

Carefully Built for Quality Performance

A structure is only as good as its foundation and your sound is no different. The TS12S subwoofer is built with reliable durability in mind to be the anchor of your setup and the anchor of your sound. Built with superior materials, the TS12S is engineered with a premium internally braced composite cabinet enclosure for tight, controlled sound. Enjoy all the thump and bump without the unnecessary rumbles and rattles. The key to low-end is clear definition for impactful sonic transmission and a carefully crafted enclosure ensures a truly unbiased sound delivery. With a premium 12-inch driver featuring a 3-inch, voice coil transducer, rest assured, the TS12S subwoofer is built to handle the rigors of live performance whether permanently installed or as part of a traveling setup, night after night.

A Subwoofer for Any Setting

What good is a sub if it doesn't play along nicely with the rest of your speaker setup? The TS12S is designed and engineered to fit into any system thanks to the versatile onboard electronics switches. Quickly bounce through the User-selectable EQ tunings to enable, boost, or bypass low end accentuation appropriately as different shows require. Use the intuitive Phase Alignment function as needed to make sure your tops and subs perform well no matter the setting or setup. With dedicated input and output paths, seamlessly connect your companion Alto Professional full-range loudspeakers or any other standard loudspeaker units.

Technical Specifications

Output Power: 2500W peak @ 4 O
Transducer: Low 12" (305 mm) woofer; 3" (76.2 mm) high-temperature voice coil
Frequency Response: 44 Hz - 140 Hz (- 3 dB)
Frequency Range: 38Hz-152Hz(-10dB)
Maximum SPL: 130dB(@1m)
Connections: (2) XLR+1/4" (6.35 mm) inputs; (2) XLR outputs; (1) IEC power cable input
External Controls: Volume control, signal/clip limiter with LED, speaker use button, proximity button, power switch with LED
Electronic Protections: Electronic clip, thermal and transducer overdrive protection
Enclosure: Internally braced MDF cabinet; 36 mm mounting pole socket on top panel

Power

Connection: Standard IEC cable
Input Voltage: 100-120, 50/60 Hz; 220-240 VAC 50/60 Hz
Consumption: 1600W
Fuse: 100-120V, T15AL AC250V; 220-240V, T8AL AC250V
Dimensions (height x width x depth): 17.9" x 18.1" x 19.9" / 454.7 x 459.7 x 505.5 mm
Weight 57.1 lbs. / 25.9 kg

Notes: The Zomo Flightcase P-SL-A9 NSE is a set case suitable for the Pioneer DJ DJM-A9 mixer and 2x Pioneer DJ PLX-1000 turntables and convinces with a lot of details. The P-SL-A9 NSE flight case adds a new equipment case to the popular NSE series. This modern flightcase is incredibly robust to survive the hard tour everyday life without problems.

Abrasion, as well as cigarette burns, cannot harm the Flightcase P-SL-A9 NSE, thanks to the solidly processed, laminated 9mm plywood. Developed for the strenuous tour use, the Zomo Equipment flight cases are definitely tour-ready and protect your more expensive DJ equipment from damage, moisture or falls.

Thanks to the extra wide and black painted profiles made of aluminum and the massive ball corners, the Zomo DJ Case offers a very high durability. To exclude slipping of the DJ mixer, the DJM-A9 Equipment Flightcase is equipped with an excellent inner padding, which reliably protects the equipment from damage and scratches.

Even while your gear is still in the case, the front panel can be easily and quickly removed at the gig. The Zomo EA-1 angle adapter is recommended as a seperate accessory to connect the headphones even easier to the mixer.

The Pioneer DJ Equipment Case in the black NSE (= Night Style Edition) offers not only professional quality, but also convinces with a classic look - definitely an eye-catcher! For an incredibly secure fit of the lid and easy unlocking and locking provide the helpful butterfly snap locks. Additionally all NSE equipment cases are lockable with an optional padlock for higher protection against theft.

Features Zomo Flightcase P-SL-A9 NSE

Provides effective protection against shocks and scratches
High quality and workmanship for hardest use
Extra solid construction
classic design
High quality inner padding for best hold
Practical ball corners
High-quality butterfly fasteners
Integrated carrying handles for easy transport
Removable lid

Technical data

Suitable equipment: 1x Pioneer DJ DJM-A9 and 2x Pioneer DJ PLX-1000
Outer material: 9mm plywood
Color: Black (NSE)
Weight: tba
Outer dimensions: 1449 (width) x 563 (depth) x 209 (height) mm
** The devices shown and/or mentioned on the photos are NOT included!

Suitable devices:
Pioneer DJ DJM-A9
Pioneer DJ PLX-1000

Suitable brands: Pioneer DJ

Laptop shelf included: No

Notes: ***B-STOCK: Box opened, light surface marks, product in perfect working condition ***


UDG have further finetuned what was already a great design concept for a flight case into one especially for the most discerning DJ/producer. Constructed from solid 9mm thick plywood, the outside is laminated in a black finished honeycomb/hexagonal "Stage Grip" pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damages, creating a unique stylish & practical finish.

Extra wide black finished aluminium profile & massive UDG logo embossed ball corners are incorporated to ensure longevity & maintaining a permanently attractive, professional design. The UDG Ultimate Flight Case Set Pioneer CDJ-3000/A9 Black Plus (Laptop Shelf + Wheels) also features built-in corner wheels with high quality in-line skate bearings for convenient transport and heavy-duty, spring-loaded handles for a secured lift & load. In addition, there is an extra notebook shelf included for your notebook, mouse and/or any other devices such as effect processor and interfaces.

UDG Ultimate Flight Case Set Pioneer CDJ-3000/A9 Black Plus (Laptop Shelf + Wheels) not only transports your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incorporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black coloured combination.

Colour: Black
Weight: 25,00 kg / 55 lbs
Outer Dimensions (W x H x D): 116.7 x 53.8 x 21.9 cm | 45.9 x 21.2 x 8.6 inch
Inner Dimensions (W x H x D): PLAYER COMPARTMENT: 33.2 x 42.4 x 8.7 cm | 13.1 x 16.7 x 3.4 inch
MIXER COMPARTMENT: 40.9 x 42.4 x 8.7 cm | 16.1 x 16.7 x 3.4 inch
Material: Heavy duty construction of 9 mm thick plywood
Protection: Improved powder coated and anodized hardware
High density diamond embossed EVA foam & carpeted protective padding
Dual anchor rivets with included washer
Extra-wide silver solid aluminium profiles
Secure stacking due to stackable ball corner

Extras

Convenient 80 mm space at rear for connections & PSU storage
Cable access hole with removable UDG emblem cover
Removable front access panel
Built-in corner wheels with high quality in-line skate bearings
Adjustable laptop shelf
Fits: 1 x Pioneer DJM-A9 and 2 x CDJ-3000 and CDJ/DJM models or any 12"-mixer/ CD-player models from Allen & Heath, Denon, Rane, Reloop etc. + 1 x Laptop + Accessories

Notes: UDG have further finetuned what was already a great design concept for a flight case into one especially for the most discerning DJ/producer. Constructed from solid 9mm thick plywood, the outside is laminated in a black finished honeycomb/hexagonal "Stage Grip" pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damages, creating a unique stylish & practical finish.

Extra wide black finished aluminium profile & massive UDG logo embossed ball corners are incorporated to ensure longevity & maintaining a permanently attractive, professional design. The UDG Ultimate Flight Case Set Pioneer CDJ-3000/A9 Black Plus (Laptop Shelf + Wheels) also features built-in corner wheels with high quality in-line skate bearings for convenient transport and heavy-duty, spring-loaded handles for a secured lift & load. In addition, there is an extra notebook shelf included for your notebook, mouse and/or any other devices such as effect processor and interfaces.

UDG Ultimate Flight Case Set Pioneer CDJ-3000/A9 Black Plus (Laptop Shelf + Wheels) not only transports your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incorporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black coloured combination.

Colour: Black
Weight: 25,00 kg / 55 lbs
Outer Dimensions (W x H x D): 116.7 x 53.8 x 21.9 cm | 45.9 x 21.2 x 8.6 inch
Inner Dimensions (W x H x D): PLAYER COMPARTMENT: 33.2 x 42.4 x 8.7 cm | 13.1 x 16.7 x 3.4 inch
MIXER COMPARTMENT: 40.9 x 42.4 x 8.7 cm | 16.1 x 16.7 x 3.4 inch
Material: Heavy duty construction of 9 mm thick plywood
Protection: Improved powder coated and anodized hardware
High density diamond embossed EVA foam & carpeted protective padding
Dual anchor rivets with included washer
Extra-wide silver solid aluminium profiles
Secure stacking due to stackable ball corner

Extras

Convenient 80 mm space at rear for connections & PSU storage
Cable access hole with removable UDG emblem cover
Removable front access panel
Built-in corner wheels with high quality in-line skate bearings
Adjustable laptop shelf
Fits: 1 x Pioneer DJM-A9 and 2 x CDJ-3000 and CDJ/DJM models or any 12"-mixer/ CD-player models from Allen & Heath, Denon, Rane, Reloop etc. + 1 x Laptop + Accessories

Notes: ***B-STOCK: Box opened, product in perfect working order***


UDG have further finetuned what was already a great design concept for a flight case into one especially for the most discerning DJ/producer. Constructed from solid 9mm thick plywood, the outside is laminated in a black finished honeycomb/hexagonal "Stage Grip" pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damages, creating a unique stylish & practical finish.

Extra wide black finished aluminium profile & massive UDG logo embossed ball corners are incorporated to ensure longevity & maintaining a permanently attractive, professional design. The UDG Ultimate Flight Case Set Pioneer CDJ-3000/A9 Black Plus (Laptop Shelf + Wheels) also features built-in corner wheels with high quality in-line skate bearings for convenient transport and heavy-duty, spring-loaded handles for a secured lift & load. In addition, there is an extra notebook shelf included for your notebook, mouse and/or any other devices such as effect processor and interfaces.

UDG Ultimate Flight Case Set Pioneer CDJ-3000/A9 Black Plus (Laptop Shelf + Wheels) not only transports your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incorporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black coloured combination.

Colour: Black
Weight: 25,00 kg / 55 lbs
Outer Dimensions (W x H x D): 116.7 x 53.8 x 21.9 cm | 45.9 x 21.2 x 8.6 inch
Inner Dimensions (W x H x D): PLAYER COMPARTMENT: 33.2 x 42.4 x 8.7 cm | 13.1 x 16.7 x 3.4 inch
MIXER COMPARTMENT: 40.9 x 42.4 x 8.7 cm | 16.1 x 16.7 x 3.4 inch
Material: Heavy duty construction of 9 mm thick plywood
Protection: Improved powder coated and anodized hardware
High density diamond embossed EVA foam & carpeted protective padding
Dual anchor rivets with included washer
Extra-wide silver solid aluminium profiles
Secure stacking due to stackable ball corner

Extras

Convenient 80 mm space at rear for connections & PSU storage
Cable access hole with removable UDG emblem cover
Removable front access panel
Built-in corner wheels with high quality in-line skate bearings
Adjustable laptop shelf
Fits: 1 x Pioneer DJM-A9 and 2 x CDJ-3000 and CDJ/DJM models or any 12"-mixer/ CD-player models from Allen & Heath, Denon, Rane, Reloop etc. + 1 x Laptop + Accessories

Notes: Reloop's next-generation interface is the go-to for connecting turntables and media players to Serato, offering three stereo inputs and three stereo outputs. Studio-quality 24-bit / 96 kHz conversion and built-in USB-A hub.

Supplier's Notes:
Back to the music

The Reloop Flux is a next-generation USB-C interface for using Serato DJ Pro with turntables, CDJs or other media players. The interface boasts superior audio qualities, a well-designed operating concept and a club-ready design. It can transform any conventional mixer into a professional digital vinyl system.

Maximum flexibility

Three stereo inputs provide DJs with maximum flexibility. Turntables, CDJs and similar can be used in any combination. The settings are adjusted using discreet DIP switches, which virtually eliminates any chance of accidental switching in the club. The interface includes three stereo outputs, including an AUX out that can be routed to Serato's internal sampler. Gold-plated, corrosion-resistant RCA jacks ensure high-quality audio transmission.

Full control

The Flux provides the best possible routing overview thanks to clearly visible signal flow LEDs for all inputs and outputs and a Thru status indicator. Connection status (hub, PD, DC) LED indicators on the top of the interface provide additional control options. The Direct Thru buttons on the top of the interface enable you to quickly and easily activate and disable Thru mode, which allows connected turntables and CDJs to be used conventionally. Navigation through the Serato software is no longer necessary.

Hub inside

The Flux includes a built-in 2-port USB-A hub for connecting MIDI controllers and other USB accessories. Aside from the expanded connection options, the hub reduces potential connection faults in a busy club environment by keeping the setup connected even without the laptop.

Studio quality - anytime, anywhere

The Flux offers studio quality in the club and wherever it's needed with 24-bit/96 kHz, high-quality digital/analogue converters and ultra-low latency. For this reason, it's a superior DVS interface which could also be used as an audio interface in the studio.

Always powered

The Flux is bus-powered by a computer, so there's minimal wiring required for audio and power cables. The DVS interface can also be powered by external power sources through the USB-C DC input, allowing turntables and CDJs to be used in Thru mode even without a computer connected. The Flux's second USB-C port provides Power Delivery support for other USB-C devices (max. 60 W), such as a MacBook.

Robust & roadworthy

The interface has a durable metal housing with a scratch-resistant, black surface, ensuring a long service life even with heavy use. The extended edge design keeps the connections well-protected.

Plug & play for Serato DJ

The Reloop Flux unlocks the full version of Serato DJ Pro and Serato DVS. This means DJs can get up and running with the market-leading digital vinyl system in no time. Additional licences are not necessary.

Features:

3-channel (6x6 in/out) USB-C DVS interface for Serato DJ Pro
Turn any mixer into a professional digital vinyl system
Unlocks full version of Serato DJ Pro and Serato DVS
Studio-grade 24-bit sound card with crystal-clear audio and ultra-low latency response
Supports up to 96kHz with high-quality D/A converters for superior audio processing
Also functions as a stand-alone studio interface for recording and playback audio
3x inputs for turntables, CD players or AUX-In for live feed signal, switchable in any combination via dedicated dip switches
Dedicated GND terminal for grounding turntables
Gold-plated, corrosion-resistant audio connections
3x line outputs, including AUX-Out, assignable to the Sampler
Easy, accessible direct thru buttons for analogue deck playback
All terminals are visible from the top of the unit for easy installation in dark surroundings
Bus-powered cable connection for power and audio
Optional USB-C DC in port for external power supply
Power delivery support for USB-C devices (max 60W)
Signal-flow LEDs for all inputs and outputs (L/R) and thru indication for clear visibility
Power LEDs on the top panel for connection status (Hub, PD, DC)
2-port USB-A hub for connecting further accessories
Rugged, heavy-duty metal housing with a scratch-resistant black finish for durability on the road and reliability in the club
Highly robust, extended edge design to protect connection terminals
Supports the use of Serato NoiseMap™ control vinyl (not included) or custom control signal WAV file for use via CDs or USB drive (download available) with no additional license purchase needed
Including: 2x RCA audio cables, 1x USB-A to USB-C, 1x USB-C to USB-C, user manual

Technical Data

Power:
USB bus powered: Yes
Recommended power: 2 A or higher / minimum power: 400 mA
Maximum USB-PD throughput: 60 W
Maximum USB Hub power output: 2 x 0.8 A = 8 W
Supported external USB (type A or C) power supply: 5 V/1 A - 20 V/3 A
Power supply priority: FLUX self-power -> USB Hub -> PD (to PC)

Audio:
S/N Ratio (output reference level 1 kHz, +4 dB):
- Deck In (LINE signal input: 0 dBV): More than 83 dB
- Deck In (PHONO signal input: -32 dBV): More than 73 dB
THD + N:
-LINE signal input: -4 dBV @1K / Less than 0.03% (1 kHz,+0 dB)
-PHONO signal input: -36 dBV @1K / Less than 0.05% (1 kHz,+0 dB, Inverse RIAA)
Maximum Gain:
- Deck In (LINE): +4 dB i 2 dB
- Deck In (PHONO): +36 dB i 2 dB
Maximum Input (1 kHz, THD=1%):
- Deck In (LINE): More than +7 dBV
- Deck In (PHONO): More than -25 dBV
Maximum Output (1 kHz, THD=1%):
- Deck Output: More than +11 dBV

USB:
USB audio interface with 24 bit/44.1 kHz, 48 kHz, 96 kHz
USB 2.0 high-speed (480 Mbit/s)
Class-compliant on macOS
USB Power Delivery Protocol 3.0

General:
Dimensions (W x D x H): 160 x 120 x 34 mm
Weight: 0.85 kg
Accessories: User Manual, 1x USB type C/C cable, 1x USB type C/A cable, 2x RCA cable bit

Notes: The Zomo Flightcase Rane Four Plus NSE Flightcase is custom-made for the Rane FOUR controller. Zomo expands its selection with the stylish NSE (= Night Style Edition) Flightcase, adding a new equipment flightcase to the lineup. In addition to its stylish appearance, the equipment case also impresses with its robust construction.

Thanks to the extra strong, black-painted aluminum profiles and the extra solid ball corners, the Zomo DJ Case offers exceptional durability. The practical internal padding of the Flightcase Rane Four Plus NSE guarantees secure protection for the Rane DJ controller against scratches, defects, or other damage.

The stylish, advanced design in the black NSE (= Night Style Edition) complements the concept of the Zomo Flightcase, not only with incredible professional quality but also in terms of design. The helpful butterfly latches allow for easy opening and locking, ensuring a highly secure hold of the lid. All NSE equipment cases can also be locked with an optional lock.

Cigarette embers, heat, and abrasion cannot harm the Flightcase Rane Four Plus NSE, thanks to the high-quality, laminated 9mm plywood. Designed for the rough stage environment, Zomo equipment flightcases are naturally suitable for road and air travel.

The front strip can be quickly and easily removed, even while your DJ gear remains in the case.

Features Zomo Flightcase Rane Four Plus NSE

High-quality flightcase suitable for the Rane FOUR controller
Provides high protection against shocks, scratches, or external damage
Professional craftsmanship for rugged touring use
Extra stable construction
Classic design in dark black NSE optics
Removable front strip - controller can remain in the flightcase
Useful storage for notebooks
Sturdily crafted interior padding for optimal grip
Convenient ball corners offer reliable protection against shocks and vibrations
Premium butterfly latches for quick closure
Practical handles for easy transport
Detachable lid
Technical Specifications
Compatible devices: 1x Rane FOUR
Retractable shelf for 1x 17-inch notebook integrated
Outer material: 9mm plywood
Color: Black NSE (Night Style Edition)
Weight: 19.3 kg
External dimensions: 873 (width) x 522 (depth) x 218 (height) mm
** The devices shown and/or mentioned in the photos are NOT included in the delivery!

Suitable devices: Rane FOUR
Suitable brands: Rane
Laptop shelf included: Yes

Notes: Great value from this entry-level rotary mixer. Simple two-channel design with three-band EQ and an intuitive multi-mode filter. A strong rival to the Omnitronic TRM-202MK3.

Supplier's Notes:
Introducing the Headliner R2, a 2-channel rotary DJ mixer that is perfect for DJ's looking for precise control and a warm sound, without breaking the bank. Don't let the price tag fool you. The R2 is packed with features, like an analog filter and 3-band isolator EQs on each channel, and uses only high-quality components, including genuine ALPS potentiometers.

Featuring two stereo channels with selectable Line and Phono RCA inputs, each channel on the Headliner R2 comes equipped with gain control with a peak LED, a 3-band isolator EQ, a headphone cue selector, a large channel volume control knob, and a filter activation switch.

The Master channel boasts an analog filter, headphone monitoring, and output control section. The analog filter features selectable High Pass / Low Pass Filter modes with Frequency and Resonance controls, giving you precise control over your sound. Independent Master and Booth outputs with volume controls, both with balanced XLR and unbalanced RCA connectors, give you the flexibility to connect to any sound system.

The headphone Cue control section is packed with features, including headphones volume control, headphones mix control (Cue/Master), and split monitor switch. You can easily switch between listening to the master output and the cue output, or blend them together in your headphones, giving you complete control over your mix. The high current headphone amplifier with, dual 1/4" and 1/8" jacks, allows you to use any type of headphones you prefer.

The Headliner R2 features genuine ALPS potentiometers, and a sturdy metal enclosure with stained wood side panels for a classic look that will complement any DJ setup. The modular internal construction, coupled with the external power supply connected via locking Mini XLR ensure superior audio performance.

The Headliner R2 is a reliable, high-quality mixer that will give your DJ performances that classic vibe. Whether you're spinning house, techno, or classic funk/soul/disco jams, this fun little mixer is the perfect addition to your setup.

Specifications

Microphone Input
Nominal Input Level: -50dBu
Frequency Response: 20Hz - 20kHz (+/- 0.1dB)
THD + N: < 0.1%
EIN: -120dBu (150O Load)
Input Impedance: 3 kOhm

Line Inputs
Nominal Input Level: -10dBV (-7.8dBu)
Gain Range: -12dB to +12dB
Frequency Response: 20Hz - 20kHz (+/- 0.1dB)
THD + N: < 0.05%
Input Impedance: 47 kOhm

Phono Inputs
Maximum Input Level: -40dBu
Gain Range: -12dB to +12dB
Frequency Response: RIAA
THD + N: < 0.05%
Input Impedance: 47 kOhm

Main Outputs
Nominal Output Levels, balanced: +4dBu
Maximum Output Level, balanced: +20dBu
Nominal Output Levels, unbalanced: -10dBV (-7.8dBu)
Maximum Output Level, unbalanced: +12dBu
Frequency Response: 20Hz-20kHz (+/-0.5dB)
Residual noise: <-80dBu Dynamic Range: > 100dB
Crosstalk: < -65dB
THD + N: < 0.05%

Headphone Output
Maximum Output Level: 70mA/channel into 150O
Minimum Load Impedance: 32 Ohms/channel

Power Supply
Type: External with locking mini-XLR connector
Input Voltage: 100-240v ~ 50/60Hz
Output Voltage: +/-15V; 500mA
Voltage Range: 32 Ohms/channel

Notes: The new MULTI-FORMAT CASE PLAYER/MIXER (V10/A9) SET is specifically designed for transporting two CDJ/Multimedia Players and a 6 or 4-channel club mixer, such as the Pioneer DJM-V10, DJM-A9, or Ecler Warm 4. The case is universally compatible with all current models from Pioneer DJ, Denon, Allen & Heath, Ecler, Rane and Reloop, and can be adjusted to different device sizes using the included foam strips. Crafted from 9 mm vinyl laminated plywood, sturdy aluminum profiles, heavy duty butterfly latches and smooth rolling wheels, this case provides ultimate protection for mobile use on the road.

Fits

Pioneer DJM-V10
Pioneer DJM-A9
Pioneer DJM-900 NXS2
Pioneer DJM-900 NXS / SRT
Pioneer DJM-800 / 700 / 600
Pioneer CDJ-3000
Pioneer CDJ-2000 NXS2
Pioneer CDJ-2000 NXS
Pioneer CDJ-900 / 850 / 800
Pioneer XDJ-1000
Allen & Heath PX5
Allen & Heath DB4
Allen & Heath DB2
Allen & Heath Xone 92 / 62 / 43C
Denon LC 6000 Prime
Denon SC-6000 / SC-6000M
Denon SC-5000 / SC-5000M
Denon X1850 / X1800
Denon X1600
Denon SC3900
Denon SC2900
Reloop RMX-90 DVS
Reloop RMX-80 Digital
Ecler Warm 4
Ecler NUO4
Rane MP2015
Rane Sixty-Eight / Sixty-Four

Specs

Outer measures: 125,4 x 59 x 25 cm
Inner measures: 33,1 x 42,5 x 8,4 cm / (CDJ compartment) 43,7 x 45,4 x 8,4 cm (Mixer compartment)
Weight: 21,5 kg

Notes: The ideal all-in-one portable PA system for live performances and DJ use. A versatile combination of mic and instrument inputs, with an internal battery for wireless use.

Supplier's Notes:
Portable battery powered speaker for performing musicians

Premium Portable Sound

The Alto Professional Busker is the battery-operated PA for the active on-the-go musical performers who demand top-tier sound in a portable solution that will be at home on any stage. With its optimized woofer and tweeter pairing for 200 watts of output, Busker delivers clear, focused sound that makes your music shine in any environment. Connect your mics and line level instruments or devices with the integrated 3-channel mixer with easily accessible control knobs to dial-in volume without stopping the music.

Powerful and Polished Performances

Give your vocals or guitars some extra shine and polish with the built-in Alesis FX processing for world class sound in even the most intimate settings, complete with dedicated knobs to adjust amounts independently. Busker features Bluetooth on Channel 3 to wirelessly

Your Way to Play and Perform Anywhere

200W of powerful, portable sound with 6.5"(165mm) woofer and 1" (25mm) tweeter
Battery Eco Mode for increased performance up to 24 hours
Compact, lightweight design that's easy to transport

Must-Have Creative Connections and Controls

Free Alto App (iOS/Android) for remote configuration and control
Bluetooth music streaming direct from your device
Integrated 3-channel mixer with built-in Alesis FX
2 XLR/TRS "Combo" inputs (for mics, instruments, & line level sources)
Aux input for non-Bluetooth devices

Sit, Stand, or Expand Your Busker

Versatile tilt or stand design for any setting
Use standalone or on a pole with DSP Speaker Use modes for tuned sound
Link two Buskers wirelessly via Bluetooth for stereo playback
Flexible horizontal and vertical monitor positions

All information subject to change altoprofessional.com stream backing tracks from your smart device. Play rhythm tracks while you jam along or rehearse with your favourite metronome app to keep your fingers loose before showtime. While you have your smart device out, pull up the free Alto App for iOS and Android to quickly load your favourite configuration settings. An available 1/8th AUX input means you can connect your favourite sound sources like drum machines or groove boxes to keep you on beat with one simple connection.

Road-Tested, Always Ready to Roll

Busker is built to travel from gig to gig seamlessly with a compact footprint that retains enough heft to pump out tight, punchy sound.

A rugged, durable exterior will stand up to the grind, while delivering the sound performance you can count on, night after night. Set it vertically on stage to enjoy accurate amplification, lay on an angle to project towards you, or pole mount it to keep your audience on their feet and immersed in your tunes. A dedicated XLR out enables a direct line to FOH or other destinations for those bigger gigs, all the while letting you enjoy your familiar custom-tailored sound up close and personally.

Long Lasting Battery

Maximize power in between charges with Battery Eco Mode, providing up to 24 hours of performance power. The Alto Professional Busker brings big sound to the best performers.

Technical Specifications

Output Power
Eco Mode: 50 W (peak)
Standard Mode: 200 W (peak)

Drivers
Low-Frequency: 6.5" (165.1 mm) woofer
High-Frequency: 1.0" (25.4 mm) tweeter

Max SPL 106 dB
Frequency Response 60 Hz - 20 kHz

Connectors
(2) Combo XLR-1/4" (6.35 mm) Inputs
(1) 1/8" (3.5 mm) AUX Input
(1) USB Charging Port
(1) XLR Line Out
(1) RCA Line Out
Charge Port 5V, 2.1 A

Bluetooth Specifications

Profile: A2DP, AVRCP
Version: 5.0 Codec: SBC
Frequency: 2402 - 2480 MHz Maximum Transmission Power: 10 dBm
Protocol: BLE
Range: 100 ft. (30.5 m)

Battery
Type: 6.6 Ah, 12 V, Lithium Ion
Life: Eco Mode: up to 90 hours; Standard Mode: up to 30 hours
Charging Time: 12 hours

Power
Connection: IEC
Voltage: 100-240 VAC, 50/60 Hz, 120 W; 220-240 VAC, 50/60 Hz; 120 W
Fuse: 100-120 V, T1.6AL AC250 V; 220-240 V, T0.8AL AC250 V

Notes: With the Zomo Flightcase D-Live-4 NSE, you can expand your DJ gear with a reliable partner that securely accommodates and stylishly showcases your Denon DJ SC Live 4 DJ controller. This high-quality flight case stands out for its robustness and elegance and belongs to the trendy NSE Series - Night Style Edition, which is renowned for its unique aesthetics and durability.

The Flightcase D-Live-4 NSE is the perfect shield for your DJ controller, whether you're traveling by car or air. These resilient cases are ready to face any challenge and protect your valuable equipment from the toughest stage conditions.

The flight case is made from 9mm thick laminated plywood, providing extra stability. This material safeguards against impacts and scratches, effortlessly withstanding the demands of touring. The sturdy construction is further enhanced by robust ball corners and specially reinforced, black lacquered aluminum profiles that ensure long-lasting durability while adding an attractive appearance to the case.

The Zomo Flightcase D-Live-4 NSE is incredibly user-friendly. The lid and front panel can be quickly and easily removed before each gig, even with the DJ controller still inside the case. This allows you to be ready for action at any time and focus entirely on your performance.

Not only does the Zomo Flightcase excel in practicality, but it also boasts an impressive visual appeal. Its elegant NSE Edition in black is a true eye-catcher that commands attention and emphasizes your professionalism. The case features convenient butterfly latches for secure handling, allowing for easy opening and closing of the lid.

You can rely on its high durability and optimal fit, ensuring your DJ controller receives the placement it deserves-secure, protected, and stylish.

Zomo Flightcase D-Live-4 NSE Features

Perfect fit: Custom-made for the Denon SC Live 4, the Zomo Flightcase D-Live-4 NSE provides optimal protection and a snug fit, keeping your DJ controller safe and well-protected.
Premium construction: Crafted from laminated 9mm plywood, the flight case offers a robust and durable structure that withstands both impacts and scratches.
Additional protection through interior padding: Soft interior padding safeguards your DJ controller from damage and unwanted influences, providing a secure and protected storage space.
Quick and easy access: The lid and front panel of the flight case can be quickly and easily removed, even with the DJ device still inside the case. This is ideal for fast access before and after performances.
Elegant and eye-catching design: With its sleek design in the black NSE Edition, the Zomo Flightcase captures attention and highlights your professionalism as a DJ.
Sturdy butterfly latches: These ensure a secure closure of the flight case while remaining easy to use. They also provide the option to attach an optional lock for additional security.
Transport-friendly: Integrated handles make the flight case easy and comfortable to transport.
Long lifespan: The flight case's sturdy ball corners offer additional protection against impacts and vibrations, contributing to its extended lifespan.

Technical Specifications

Compatible devices: 1x Denon DJ SC Live 4
Exterior material: 9mm plywood
Colour: Black (NSE)
Weight: 13.7 kg
Exterior dimensions: 716 (width) x 501 (depth) x 206 (height) mm

Notes: ***B-STOCK: Box damaged & missing software otherwise in perfect working order***


The Vestax VCM-100 is a portable rotary MIDI controller and audio interface system, designed for laptop DJ performance. Not only does the VCM-100's control interface dictate to your software, it comes with 2 stereo inputs/outputs. Unlike many other DJ MIDI controllers, no external soundcard or mixer is required for performance, headphone monitoring or integration into a sound system. 60 parameters of various software controls are assignable via USB connection.

Pitch, levels, EQs, loops, crossfader and pretty much every DJ function is pre-mapped and laied out in traditional DJ style for Vestax with the included Traktor DJ LE software. Increasing its versatility, the VCM-100 is compatible with all software that allows MIDI control assignment. 3 versions of firmware can be selected to have the best match with the software you are using. The VCM-100 is strong, sturdy, simple and very portable.

Notes: The new MULTI-FORMAT CASE PLAYER/MIXER (V10/A9) SET is specifically designed for transporting two CDJ/Multimedia Players and a 6 or 4-channel club mixer, such as the Pioneer DJM-V10, DJM-A9, or Ecler Warm 4. The case is universally compatible with all current models from Pioneer DJ, Denon, Allen & Heath, Ecler, Rane and Reloop, and can be adjusted to different device sizes using the included foam strips. Crafted from 9 mm vinyl laminated plywood, sturdy aluminum profiles, heavy duty butterfly latches and smooth rolling wheels, this case provides ultimate protection for mobile use on the road.

Fits

Pioneer DJM-V10
Pioneer DJM-A9
Pioneer DJM-900 NXS2
Pioneer DJM-900 NXS / SRT
Pioneer DJM-800 / 700 / 600
Pioneer CDJ-3000
Pioneer CDJ-2000 NXS2
Pioneer CDJ-2000 NXS
Pioneer CDJ-900 / 850 / 800
Pioneer XDJ-1000
Allen & Heath PX5
Allen & Heath DB4
Allen & Heath DB2
Allen & Heath Xone 92 / 62 / 43C
Denon LC 6000 Prime
Denon SC-6000 / SC-6000M
Denon SC-5000 / SC-5000M
Denon X1850 / X1800
Denon X1600
Denon SC3900
Denon SC2900
Reloop RMX-90 DVS
Reloop RMX-80 Digital
Ecler Warm 4
Ecler NUO4
Rane MP2015
Rane Sixty-Eight / Sixty-Four

Specs

Outer measures: 125,4 x 59 x 25 cm
Inner measures: 33,1 x 42,5 x 8,4 cm / (CDJ compartment) 43,7 x 45,4 x 8,4 cm (Mixer compartment)
Weight: 21,5 kg

Notes: Make any studio monitors sound better

High-definition monitoring for all

Upgrade any studio monitors instantly with the first out-of-the-box acoustic room correction system that anyone can afford. ARC Studio combines a standalone correction processor, new ARC 4 measurement software and a room analysis microphone.

There's a reason all today's top-tier studio monitors are adding active room correction - it supercharges their performance and ensures mixes translate flawlessly. ARC Studio offers this same massive boost in performance and accuracy to any monitor in every studio.

For the first time in the recording industry, an affordable hardware processor can be used as a correction and calibration system for any type of studio - be it home, project or professional - without the limitations of a software-only system.

Standalone digital acoustic correction system
Dramatically improves your mixing accuracy
Works with any monitor system in any room
Installs in minutes in any studio or space
Sonically invisible, audiophile performance
Emulates top monitors and playback systems
Customize your monitors' performance to taste

Improves mixing accuracy

Your room has a big impact on how you hear your music. The size, shape, materials and furniture all work to distort the frequency and stereo balance of your monitors, degrading your sound.

ARC 4's all-new algorithm analyses and corrects these issues in minutes. Your music snaps into focus, with more controlled low-end, tighter transients and pinpoint stereo imaging. It's like an instant upgrade to your monitors.

And when you trust what you hear, you'll mix faster and more confidently than ever.

Installs in minutes

Plug the mic into your interface and you'll be guided through measuring acoustical spots within your listening position. IK's award-winning ARC technology uses this 3D snapshot to identify and completely correct all the problematic issues degrading your monitors' performance.

An all-new listening experience

ARC 4 stores the correction profile and loads it into the ARC Studio processor, sitting invisibly between your interface and monitors to apply to all incoming signals. The standalone processor corrects studio monitors in any studio, including hardware- and console-based setups.

Audiophile performance

ARC Studio features a 120 dB(A) analogue input to analogue output dynamic range, 0.5 Hz to 40 kHz frequency response and ultra-stable clocking for vanishing low jitter, offering total sonic transparency and a level of accuracy you only find in mastering-grade audio converters.

And it connects to your studio and monitors via balanced XLRs with power-safe relay-based hard bypass - so when bypassed you're protected from sudden power-related pops. Between the premium audio quality and ARC Studio's all-new correction algorithm, you'll enjoy the most natural, transparent monitoring ever.

Affordably priced

ARC Studio hardware is not only designed and made in Italy to the highest precision and quality standards, but its clever engineering makes it available at a fraction of the cost of other hardware solutions.

Now everyone can dramatically improve the sound in their mixing environments: from a single pair of monitors to multiple monitoring systems, up to large facilities with multiple mixing and recording rooms.

Improves any studio

For pro studios, whether in-the-box or console-based, ARC Studio allows for a sonically transparent correction and custom-tuning for any monitoring setup from nearfields to mains, preserving the inherent system's sonic quality.

For DAW-based studios, ARC Studio frees you from the hassle of inserting plug-ins on the master bus of your work and preserves zero-latency monitoring setups, plus it allows you to listen to your preferred streaming service with acoustically corrected monitoring without messing around with system drivers.

You can create a profile for every configuration, listening position or even monitor pair. Whether you're in a makeshift studio or a world-class one, fine-tuning your monitoring to your taste has never been easier and has never sounded so good.

Customise your monitors

Customise your setup for ideal performance no matter your preference. ARC 4 offers deep control over each profile so it always sounds its best:

Target curves

ARC 4 now comes with 9 factory target curves for most situations. The default curve offers optimally balanced results with other specific curves for different needs or setups.

Adjustable correction range

By default, ARC corrects the entire frequency spectrum, but you can define limits to both upper and lower correction ranges separately. This is useful if you want to preserve the unique voicing of your monitors or are just looking to correct a certain frequency range.

Specs

ARC Studio Specifications

Audio

AD and DA converters: AKM Velvet Sound™
Audio conversion and internal processing sampling rate: 96 kHz
Audio conversion resolution: 24-bit
Internal processing resolution: 32-bit float
Frequency Response: 2 Hz - 45.0 kHz (- 2.0 dB)
Dynamic Range: 120 dB (A-weighted)
THD (20-20 kHz): 0.00035%
THD+N (1 kHz@-1dBFS): -107 dB
Channel Crosstalk (1 kHz): -122.5 dB
Max Phase Deviation: +7- 20Hz, +16- 22kHz
Input Impedance (balanced): 20 kOhm
Output Impedance (balanced): 50 Ohm
Maximum output level: +17 dBu

Latency

Natural Phase mode: 1.4 ms
Linear Phase mode: 42 ms

Power

Powered by included Power Supply Unit
Dimensions

Size: 14.4cm / 5.6" x 12cm / 4.72" x 4.5cm / 1.77"
Weight: 465g / 1,03lb

Package includes

ARC Studio room-correction processor
ARC Measurement Microphone (depending on the version)
ARC Measurement Microphone Clamp (depending on the version)
USB C-Type to USB A-Type cable (1.5 m / 4.92')
Power Supply Unit
Registration card

System Requirements

Macr (64-bits)
Minimal: Apple M1 or Intelr Core i5 Processor, 4 GB of RAM, macOSr 10.15 or newer (macOS 11 or newer required for Apple Silicon Processors).
Supported Plug-in formats: Audio Units, VST 2, VST 3, AAX.
Works with any audio interface with a phantom powered XLR microphone input and a pair of outputs for monitoring.
44.1 kHz or 48 kHz sampling rate is required for the measurement process.
One free USB port required.

Windowsr (64-bits)

Minimal: Intelr Core i5 Processor or equivalent, 4 GB of RAM, Windows 10 (64 bit) or newer.
Supported Plug-in formats: VST 2, VST 3, AAX.
Works with any audio interface with ASIO drivers, a phantom powered XLR microphone input and a pair of outputs for monitoring.
44.1kHz or 48kHz sampling rate is required for the measurement process.
One free USB port required.

Requires an OpenGL 2 compatible graphics adapter.

Notes: With the Zomo Flightcase Rane Four, you get a custom-made flight case for the Rane FOUR. The Zomo Flightcase Rane Four is part of the exclusive NSE (Night Style Edition) collection, known for its aesthetic appeal and exceptional durability. It's not just a case; it's a statement - a statement of quality, design, and function.

Made of robust, laminated 9mm plywood, this case is designed to withstand the tough everyday life on and off the stage. It's reinforced with wide, black-painted aluminum profiles and extra sturdy ball corners, giving it high resilience. Whether you're on the road or in the air, the Zomo Flightcase Rane Four is ready to protect your valuable equipment.

The interior of the case is lined with high-quality padding to protect your controller from scratches, defects, or other damages. This way, you'll always be on the safe side, regardless of spilled drinks or unexpected drops.

But the Zomo Flightcase Rane Four is not just practical - it also looks fantastic. With its sleek, advanced design in the deep black NSE edition, this case is a real eye-catcher. The front panel can be easily and quickly removed, allowing you to access your controller's inputs even when the case is closed.

The Zomo Flightcase Rane Four is more than just a case - it's an investment in protecting your equipment. With its elegant design and robust construction, it's the perfect addition for any DJ who doesn't want to compromise on quality and style.

Features

Zomo Flightcase Rane Four
Protects devices from scratches, defects, or other damages
High-quality construction and craftsmanship
Extra sturdy design
Elegant design in deep black NSE edition
High-quality interior padding
Ball corners provide effective protection against shocks and impacts
High-quality butterfly latches for quick locking
Convenient carrying handles
Removable lid
Front panel is detachable for easy access to the device
Technical Specifications
Compatible devices: 1x Rane FOUR
Exterior material: 9mm plywood
Color: Black NSE (Night Style Edition)
Weight: 15.2 kg
External dimensions: 837 (width) x 532 (depth) x 207 (height) mm
** The devices shown and/or mentioned in the photos are NOT included in the delivery!

Suitable devices: Rane FOUR
Suitable brands: Rane
Laptop shelf included: No

Notes: ***B-STOCK: Box damaged, product in perfect working order***


Excellent quality portable turntable from the legendary Stanton brand. Rechargeable batteries, Bluetooth streaming and recording direct to USB. Ideal for portablism.

Supplier's Notes:
Stanton STX

Limited edition portable scratch turntable

Razor sharp cuts, right away

The STX is the only portable turntable that comes with a factory-installed mini Innofader Nano crossfader. Designed to last over 4 million cycles, this buttery-smooth fader and can be easily swapped between left and right positions to accommodate both left-handed and right-handed scratch styles. The independent crossfader Cut-In and Curve knobs deliver an unrivalled level of crossfader customization, allowing DJs to precisely calibrate the crossfader to suit their own style. This level of customization, along with the ultra-stable platter and tonearm, makes it easy to achieve the absolute cleanest cuts possible.

Scratch whenever, wherever

Second only to a sharp, ultra-precise crossfader, ease of portability is vital for a portablism-focused turntable. High-quality rechargeable Lithium-ion batteries are included with the STX, providing enough portable power for hours of mobile use. The batteries can easily be charged by connecting the unit to a computer or wall charger using the USB C input. For extended scratch sessions, the USB C input can also be used with external power sources for even more cutting time. To top everything off (literally), the latching lid also functions as a stackable, latching base, bring the STX to standard turntable height.

Well-connected for creators

Performing with beats and loopers is as simple as connecting a smartphone wirelessly with Bluetooth or with the 1/8" stereo input. The USB port with one-touch recording makes it fast and easy to record high-quality session audio for social media content creation, while the stereo RCA outputs allow you to connect external mixers and speakers for live performances.

Performance ready

The modification culture is alive and well in the portablism world. Since the inception of this art form, we've seen ingenious designs and customizations. The most popular and utilitarian mods are already included on the STX, including a Start/Stop button, an on-board speaker, and a pitch slider with Ultra-Pitch selection switch. These key features allow for inspiring performances right out of the box and provide a solid foundation upon which DJs can further customize to match their own unique portablist style.

Features

Mini Innofader Nano crossfader installed
Independent Crossfader Cut-In and Curve controls
Rechargeable batteries (included)
USB C input for charging batteries and for external power connection
Bluetooth and 1/8" stereo input for smartphone looper apps
Direct-to-USB recording
Built-in speaker
Pitch slider with Ultra Pitch option
Stackable latching lid
Start/Stop button
33 1/3, 45, and 78 RPM switch
Stereo RCA outputs
1/4" and 1/8" headphone jacks

Technical Specifications

Connections

(1) RCA line-level output (stereo pair)
(1) 1/4" (6.35 mm) stereo headphone output
(1) 1/8" (3.5 mm) stereo headphone output
(1) 1/8" (3.5 mm) stereo input
(1) USB-C port (charges the internal battery)
(1) USB-A port (USB flash drive recording)
Speeds 33 1/3, 45, 78 RPM (45 RPM adapter included)

Power

(2) 3.7V Li-ion batteries
Dimensions (width x depth x height)

13.0" x 13.0" x 4.0" (3.25" without cover attached)
330.2 x 330.2 x 101.6 mm (82.6 mm without cover attached)
Weight: 5.3 lbs./2.4 kg

Notes: With the Zomo Flightcase D-Live-2 NSE, you expand your DJ gear with a reliable partner that securely houses and stylishly showcases your Denon DJ SC Live 2 DJ controller. This high-quality flight case stands out for its robustness and elegance, and it belongs to the trendy NSE series - Night Style Edition, which is known for its unique aesthetics and durability.

As the ultimate protector for your DJ controller, the D-Live-2 NSE flight case takes on any challenge, whether you're traveling by car or flying. These resilient cases are ready to face any challenge and keep your valuable equipment safe from the harshest stage conditions.

Constructed from 9mm thick laminated plywood, this flight case offers an extra dose of stability. It withstands shocks, scratches, and effortlessly meets the demands of touring life. Sturdy ball corners and particularly robust, black lacquered aluminium profiles complete the durable construction and give the case an attractive and long-lasting aesthetic.

The handling of the D-Live-2 NSE flight case is incredibly easy. Before every performance, you can quickly and effortlessly remove the lid and front panel, even when the DJ controller is still inside the case. You'll always be ready to go and can fully focus on your performance.

The Zomo flight case not only excels in terms of practicality but also boasts an attractive appearance. The elegant NSE edition in black immediately catches the eye and enhances your professionalism. The convenient butterfly latches ensure secure handling by enabling easy opening and closing of the lid.

You can rely on high durability and optimal fit, providing your DJ controller with the space it deserves - safe, protected, and stylish.

Features of Zomo Flightcase D-Live-2 NSE:

Perfect fit: The Zomo Flightcase D-Live-2 NSE is tailor-made for the Denon SC Live 2 to ensure optimal protection and precision fit. Your DJ controller is always safe and well-protected.

High-quality construction: The flight case is made of laminated 9mm plywood, guaranteeing a robust and durable structure. It withstands both shocks and scratches.

Additional protection with interior padding: Interior padding protects your DJ controller from damage and unwanted influences, providing a secure and protected storage space.

Quick and easy access: The lid and front panel of the flight case can be quickly and easily removed, even when the DJ device is still inside the case. Ideal for quick access before and after performances.

Elegant and eye-catching design: The Zomo flight case captivates with its elegant design in the black NSE edition, drawing all attention and emphasizing your professionalism as a DJ.

Robust butterfly latches: They ensure a secure closure of the flight case while remaining easy to use. They also offer the option to attach an optional lock for additional security.

Transport-friendly: Integrated handles make it easy and comfortable to transport the flight case.

High lifespan: The flight case's sturdy ball corners provide additional protection against shocks and vibrations, contributing to its high lifespan.

Technical Specifications:

Suitable devices: 1x Denon DJ SC Live 2
Exterior material: 9mm plywood
Colour: Black (NSE)
Weight: 11.3 kg
Exterior dimensions: 716 (width) x 483 (depth) x 206 (height) mm
** The devices shown and/or mentioned in the photos are NOT included!

Suitable devices: Denon DJ SC Live 2
Suitable brands: Denon
Laptop shelf included: No

Notes: The Zomo Flightcase PM-A9 Plus NSE is the ideal case for your Pioneer DJ DJM-A9 mixer. The unique Night Style Edition (NSE) gives this flight case an impressive, jet-black appearance that convinces not only with its robust quality but also with its stylish look.

As a renowned manufacturer of DJ cases, Zomo ensures that its products are suitable for both road and air transport. Therefore, the DJM-A9 equipment flight case is well-equipped to handle all DJ gigs effortlessly. Excellent internal padding reliably protects your equipment from damage, scratches, or external harm and also prevents the mixer from slipping.

The PM-A9 Plus NSE flight case is made of solid, laminated 9mm plywood, giving it high shock and scratch resistance. The extra-wide, black lacquered aluminum profiles and the sturdy ball corners ensure high durability, which is essential for professional use.

In case you need access to the mixer's inputs during your performance, the front panel can be quickly and easily removed even when the DJ gear is still inside the DJ case. A special feature of the PLUS version of this flight case is the integrated, pull-out laptop shelf. It provides a secure hold for your notebook during the performance, enhancing the case's practicality.

The Pioneer DJ equipment case in the dark NSE edition not only offers professional quality but also captivates with a classic appearance that is guaranteed to catch everyone's attention. The butterfly latches ensure a secure hold of the lid and allow for easy opening and closing. For additional protection, all NSE flight cases can be secured with an optional padlock.

With the Zomo Flightcase PM-A9 Plus NSE, you'll get a professional DJ case that leaves nothing to be desired in terms of quality, design, and functionality.

Features of Zomo Flightcase PM-A9 Plus NSE

Protects your equipment from negative influences
Premium quality and craftsmanship
Most stable construction
Contemporary design
Brilliant shelf for laptops
Well-crafted internal padding
Genius ball corners for optimal shock protection
High-quality butterfly latches
Convenient carrying handles
Removable lid

Technical Specifications

Suitable devices: 1x Pioneer DJ DJM-A9
Integrated pull-out shelf for 1x notebook up to 17 inches
Outer material: 9mm plywood
Color: Black (NSE)
Weight: 15.2 kg
External dimensions: 497 (Width) x 563 (Depth) x 220 (Height) mm
** The devices depicted and/or mentioned in the photos are NOT included in the delivery!

Suitable devices: Pioneer DJ DJM-A9
Suitable brands: Pioneer DJ
Laptop shelf included: Yes

Notes: UDG have further fine-tuned what was already a great design concept of a flight case into one especially for the most discerning DJ/producer. Constructed from solid 9mm thick plywood, the outside is laminated in a black finished honeycomb/hexagonal "Stage Grip" pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damages, creating a unique stylish & practical finish.

Extra wide black finished aluminium profile & massive UDG logo embossed ball corners are incorporated to ensures longevity & maintaining a permanently attractive, professional design. The UDG Ultimate Flight Case Pioneer DDJ-REV5 Black Plus (Laptop Shelf) also features heavy-duty spring-loaded handles for a secured lift & load.

UDG Ultimate Flight Case Pioneer DDJ-REV5 Black Plus (Laptop Shelf) not only transport your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incorporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black coloured combination.

Specifications

Colour: Black
Weight: 15,80 kg / 34.76 lbs
Outer Dimensions (W x H x D): 84.4 x 51.5 x 24.3 cm | 33.2 x 20.3 x 9.5 inch
Inner Dimensions (W x H x D): 73.8 x 36.2 x 5.5 cm | 29.1 x 14.3 x 2.2 inch
Material: Heavy duty construction of 9 mm thick plywood

Protection:

Improved powder coated and anodized hardware
High density diamond embossed EVA foam & carpeted protective padding
Dual anchor rivets with included washer
Extra-wide black solid aluminium profiles
Secure stacking due to stackable ball corner

Extras

Convenient 80 mm space at rear for connections & PSU storage
Adjustable laptop shelf
UDG heavy-duty spring-loaded handles
Cable access hole with removable UDG emblem cover
Removable front access panel

Fits

Pioneer DDJ-REV5 controller

Notes: UDG have further fine-tuned what was already a great design concept of a flight case into one especially for the most discerning DJ/producer. Constructed from solid 9mm thick plywood, the outside is laminated in a black finished honeycomb/hexagonal "Stage Grip" pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damages, creating a unique stylish & practical finish.

Extra-wide black finished aluminium profile & massive UDG logo embossed ball corners are incorporated to ensure longevity & maintaining a permanently attractive, professional design. The UDG Ultimate Flight Case Rane Four Black Plus (Laptop Shelf + Wheels) also features heavy-duty, spring-loaded handles for a secured lift & load.

UDG Ultimate Flight Case Rane Four Black Plus (Laptop Shelf + Wheels) not only transports your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incorporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black coloured combination.

Specifications:

Colour: Black
Weight: 16,00 kg / 35.2 lbs
Outer Dimensions (W x H x D): 89.0 x 53.1 x 23.3 cm | 35.0 x 20.9 x 9.2 inch
Inner Dimensions (W x H x D): 78.4 x 39.3 x 9.0 cm | 30.8 x 15.4 x 3.5 inch
Material: Heavy duty construction of 9 mm thick plywood
Protection: Improved powder coated and anodized hardware
High density diamond embossed EVA foam & carpeted protective padding
Dual anchor rivets with included washer
Extra-wide silver solid aluminium profiles
Secure stacking due to stackable ball corner

Extras

Convenient 80 mm space at rear for connections & PSU storage
Cable access hole with removable UDG emblem cover
Removable front access panel
Roller wheels with high quality in-line skate bearings for convenient transport
Fits: 1 x Rane Four + 1 x Laptop + Accessories

Notes: The ultimate companion for producers on the move - the UDG Ultimate Producer Backpack Trolley. This sleek and versatile backpack is designed to meet the demands of modern music producers and DJs, combining style, functionality, and durability in one package.

The Producer Backpack Trolley is more than just a bag; it's a travel companion designed to make your life easier while maintaining a sleek, professional look. Whether you're a DJ, music producer, or someone who needs a reliable, feature-packed backpack for travel, this is the perfect choice. Elevate your gear transportation experience with the ultimate in style and functionality. Get yours today!

Specifications

Colour: Black, Orange inside
Weight: 4,25 kg / 9.35 lbs
Outer Dimensions (W x H x D): 39.5 x 62.0 x 32.0 cm | 15.5 x 24.4 x 12.6 inch
Inner Dimensions (W x H x D): 35.0 x 45.5 x 15.5 cm | 13.8 x 17.9 x 6.1 inch
Material: Water Resistant Nylon 420D

Protection

Padded MIDI controller compartment
Inseparable wheel cover
Comfortable moisture absorbent shoulder straps
Ergonomic back padding provide exceptional comfort
Integrated with a TSA combination lock
Easy backpack to trolley mechanism

Extras

Multiple external pockets for accessories & smaller gear
Quick access top pocket
Top & side carry handles
Retractable handle with 2-stage trolley system
Smooth rolling in-line wheels with high quality in-line skate bearings

Fits

Main compartment fits up to 18.4" laptop.
Pioneer CDJ-3000, Ecler Warm4, Reloop RMX-95, Roland SPD-SX Pro, Ableton Push 3