Resultados de la búsqueda

Notes: The Acc Sees velvet antistatic vinyl brush cleans away dirt & grease while reducing static build up. This helps to improve sound reproduction quality and prolong the life expectancy of vinyl discs.

Notes: The Kenton Thru-5 is a high quality MIDI Thru box with opto-isolated MIDI In and separate drive for each MIDI Out. It is powered from a mains adaptor (wall wart) so you can fit and forget.

Comes with multi-region power supply

Notes: The original favourite and improved Magma classic. Now with loads more strength thanks to the new improved trolley-board system. Unbeatable for the DJ who is on the road a lot, the 100 trolley is a proven, practical and convenient transport solution.

The materials used, the design of the new reinforced fivefold glued bottom board and extra strong front stand, are all tested to ensure the highest strength possible and guarantee the best stability and a long life.

Notes: Unlike the rubber mat which is made to keep hold the record firmly in sync with the rotating platter, slipmats are designed to slip on the platter, allowing the DJ to manipulate a record on a turntable while the platter continues to rotate underneath.

The pair of good-quality slipmats with duplex 5 design is suitable for any industrial standard turntables.

Notes: Module A-124 is a special 12dB multimode filter using the "strange" filter circuit of the "EDP Wasp" (an analog synthesizer with black/yellow case built end of the seventies, manufactured by the UK company "Electronic Dream Plant" with Chris Huggett und Adrian Wagner). This design "abuses" digital inverters as analog operational amplifiers leading to distortions and other "dirty" effects that generate the specific sound of this filter. The filter is equipped with a band pass output and a combined low/notch/high pass output. For this output a control knob defines the relation between low and high pass signal. If both signals appear at the same level (i.e. middle position of the Mix knob) one obtains a notch filter. Otherwise the low or high pass signal predominates. The module does not feature self-oscillation in contrast to most of the other filters of the A-100 system.

Inputs: Audio In, CV In (2x)
Outputs: Bandpass Out, Low/Highpass Mix-Out
Controls: Audio and CV attenuator, Frequency, Resonance, LP/HP Mix

The function and operation of this module is very similar to the module SEM VCF A-106-5. But the sound of both filters is very different! The only functional difference is the position of the sockets and controls, and the function of the controls CV2 (A-124: normal attenuator, A-106-5: polarizer).

- 3U Eurorack module, 8HP wide, 45mm deep
- Current draw 30mA

Notes: Since its release the d+ Class B series has become a worldwide standard for DJ's, Musicians and Producers due to its solid and reliable sound and build quality.

The reliability of the d+ Class B series is proven by the fact that it has been installed worldwide by numerous clubs, festivals and professional studios.

The d+ Class B Series brings the highest quality and a cool design to DJ gear, audio interfaces, speakers, mixers and other sound gear. The best combination of materials and structure is utilised to enhance sound systems and live experiences.

Proudly designed and produced in Japan by Oyaide.

FOR DJING AND SOUND PRODUCTION. The d+ USB range aims to provide the best environment to DJ's and Artists who pursue the highest sound quality in their performance.

FOR HI-FI AUDIO. The most important factor for digital audio is lossless speedy and accurate data transmission. The d+ USB range delivers clean and stable data for a USB DAC.

FLAT DESIGN. The flat designed cable prevents signal loss caused by cable bends and allows for safe, simple coiling and storage.

SIGNAL PROTECTION. With an analogue like approach which helps protect the digital signal from internal/external noise and electromagnetic wave by use of TPE outer sheath and double shielding.

CONNECTORS. USB A-Male to USB B-Male connectors are made of bronze alloy with 24K gold plating which enhances durability and stability.

USB 2.0 (HI-SPEED) COMPLIANT.

INDUSTRY STANDARD CABLES. Installed in some of the best clubs and studios worldwide including Space Ibiza, Watergate Berlin and the Dance Valley Festival.

ENDORSED BY: Carl Cox, Dubfire, Loco Dice, Diplo, Dave Clarke, Sasha, Orbital and many more.

Notes: The UDG DIGI Headphone Bag is a premium headphone carrying bag made from Ballistic Nylon that is designed to protect headphone, USB drives, SD cards, Ext. hard-drive, mobile phone, cables, business cards, credit cards and accessories in one padded carry bag that includes a handgrip, detachable and adjustable shoulder strap. The UDG DIGI Headphone Bag the one bag a DJ need to carry around today's digital media.

Specifications:

Colour: Black Camo/ Orange Inside
Weight: 0,35 kg / 0.77 lbs
Outer Dimensions (W x H x D): 22.0 x 22.0 x 9.0 cm | 8.7 x 8.7 x 3.5 inch
Inner Dimensions (W x H x D): 21.0 x 21.0 x 8.0 cm | 8.3 x 8.3 x 3.1 inch
Material: Water resistant Ballistic Nylon 1680D
Protection: Foam padded interior

Extras

Detachable and adjustable shoulder strap. Holds USB drives, SD cards, hard drive, mobile phone, cables, business cards, credit cards and accessories

Fits

Most foldable DJ Headphones.

Notes: Eight channels of audio and CV sampling with real-time editing and processing. Does basic sampling well but quickly gets creative and weird.

Supplier's notes:
The 'Squid Salmpler' is a Eurorack 8 channel audio & CV sampler. It is designed for immediate real time sampling, editing and mangling within a modular context.

Taking influence from early hardware samplers, The Squid Salmple focuses on usability and instinctive operation, incorporating a proven Pamela's Workout style user interface for minimal screen dependence and a fun, hands on experience.

With support for sampling and playback for both audio and CV, as well as CV control of all parameters, on-the-fly bank loading and saving to USB, The Squid Salmple brings a unique take on old school sampling into the modular realm.

The Squid Salmple comes with a USB Stick containing approximately 90 banks of original carefully curated royalty free samples. This includes a wide range of sounds from classic drum machines and weird synths to field recordings and CV modulations. Banks are provided by both ALM and some of our favourite artists and friends including Mumdance, Solid Blake, Russell Haswell, Lauren Flax, Dave Burraston (NYZ), Sue Zuki, Dungeon Acid, Sasha Lewis and Andrew Duff.

Notes: The lovable oddball of the Arturia range, this brilliant hybrid synth combines versatile wavetable and digital oscillators with analogue filters. Touch keyboard gives uniquely expressive control.

*** New firmware update (26th October 2021) *** Arturia are happy to announce another major new firmware update for MicroFreak, bringing massive new creative functionality for users free of charge.

Firmware V4.0 elevates this hybrid desktop synthesizer's status as a sound design powerhouse even further:
New WaveUser sound engine
Allows for user wavetables(!!)
64-new presets
Sequencer Unison & Chord Voices
Faster Oscillator Encoder Response
....and more!

This update, plus ALL the of previous updates (see Vocoder & Noise Engineering oscillators etc.) cement the MicroFreak as one of the most interesting, powerful and flexible synthesizers on the market, whilst maintaining excellent value for money.

Supplier's Notes:

A synthesizer like no other, MicroFreak is a peculiar, exceptional instrument that rewards the curious musician. It blends wavetable and digital oscillators with analogue filters. It features a unique poly-aftertouch flat keyboard. It adds controlled randomness to sequences. This isn't a revolution, it's a mutiny.

This out-there little music machine features a versatile digital oscillator so you can create rare and interesting sounds with ease. Modes like Texturer, KarplusStrong, Harmonic OSC, and Superwave give adventurous musicians the chance to explore totally new, unheard possibilities. Like having dozens of synths in just one instrument, both wild-eyed newcomers and seasoned professionals will fall in love with MicroFreak's flexible, powerful synth engine.

Physical modelling, wavetable synthesis, virtual analogue, there is nothing as complete and exciting as the MicroFreak oscillator on the market. It's hard to believe from such a small synth, but here it is, ready for you to explore. Excite your creativity and reward your curiosity with a large, diverse sound palette. MicroFreak features 11 awesome oscillators, 4 bespoke Arturia engines, and 7 modes from our friends at Mutable Instruments.

Inspired by the trailblazing 12-dB Oberheim SEM filter, you can make MicroFreak's filter scream or whisper to taste. The filter is state-variable, and can even auto-oscillate! You can use this is any way you like, from taking the edge of the razor-sharp wavetable sounds, or automating the cut-off by modulating it with keyboard pressure or the in-built sequencer.

Record up to four automations, edit notes per step or use the innovative Spice and Dice sequencer functions to find happy accidents. Add randomization to create evolving, original patterns, and virtually rewire and reconfigure its signal chain and controls with the 5x7 modulation matrix.

Notes: The Decksaver Pioneer CDJ-3000 DJ Multi Player Cover features an ultra-durable polycarbonate shell, designed to protect from dust, liquid, particulates and accidental impact damage. It will also protect against superficial damage such as scratches or bumps while on the move. The high quality smoke/clear sheen allows you to see the Medusa through the cover, allowing you to see your gear at all times. The smooth and sheen like finish will slide straight into a bag, ideal for the travelling musician.

Notes: Keyboard meets sequencing in Arturia's all-round controller. USB, MIDI, CV and analogue clock compatibility make this 64-step polyphonic sequencer a true all-rounder. Great value.

Supplier's Notes:
KeyStep 37 goes beyond an easy-to-use 64-step sequencer, arpeggiator and MIDI keyboard. It's responsive, dynamic, expanded in every direction to encourage musical exploration - the controller that's built to help write music and also includes Ableton Live Lite, making it a complete music production starter kit, as well as appealing to veteran musicians. Like KeyStep and KeyStep Pro before it, KeyStep 37 offers unique features not found in any other product.

The familiar KeyStep formula, expanded. KeyStep 37 features a velocity-sensitive 37-note keybed, complete with aftertouch and RGB LED feedback, while remaining lightweight and compact.

At the center of the control panel, you'll find 4 new knobs with an LED screen, giving you instant access to inspiring new expressive tools and MIDI tweaking - total creative control.

The new controls unlock KeyStep 37's unique & enhanced Chord mode. Choose from 12 chord types, an array of strum effects, and spread the voices out into complex velocity-sensitive parts that respond like a stringed instrument.

Map out KeyStep 37's 3-octave keyboard range with a scale of your choice using Scale mode. Any key you play will automatically quantize to the nearest note in the chosen scale.

Tap into the inner workings of your MIDI hardware and software with assignable 16 MIDI CC pa-rameters across 4 switchable banks. Use the 4 new controls to tweak settings on the fly for dy-namic performances.

The core of your setup:

KeyStep 37 is designed to be put in control. An accessible interface, a compact design and com-prehensive connectivity make it the perfect centerpiece for your rig - whatever your needs.

Hook up your synth hardware with MIDI in/out. Control your favorite VST instruments with MIDI over USB. Use CV pitch, gate and mod connections for modular integration. Analog sync in/out keeps everything in time without hassle. The best bit? Use it all at the same time.

Included is a free copy of Ableton Live Lite, an accessible music-making suite for your Mac or PC. Register KeyStep 37 for your free download and get creative right out the box - let the music flow freely.

Notes: Make Noise is proud to introduce Strega!Strega is an audio alchemical experiment. Activate! Spill the tonic into time and let time decay through the filter to hear the results.

Strega is an instrument designed in collaboration with Alessandro Cortini. Inspired by Cortini's music and sonic experimentations, Strega embodies the seen and unseen, the sign and magic, the alchemy of sound.

Strega is able to conjure audio tones, generate control signals, and process external sounds. Patch the 0-COAST or any other line level source into the Strega to unlock new sounds!

This new instrument takes the same form factor as the 0-COAST and 0-CTRL. It was designed to be controlled by the 0-CTRL or the 0-COAST's MIDI CV B outputs and is equally happy interfacing with Eurorack modules as well.

Dimensions: 5.5 x 9 x .75 inches

Weight: 1.7lbs

Power Requirement: +15VDC @1A, 2.1mm Tip Positive Connector

Notes: Successor to the excellent Metropolis, the Metropolix is a performance-focussed step sequencer with some really neat features, including modulation and sub-sequences in Loopy mode.

Supplier's Notes:
The Intellijel Metropolix is a unique and powerful Eurorack format musical sequencer. With an abundance of hands-on, tactile controls and a wealth of modulation possibilities (both internal and external) you can quickly and easily create infectiously musical sequences that are never boring. Even the simplest riff can be brought to life with seemingly endless options to create variations or real-time manipulations. Equally at home in the studio or a live improvised performance, the Metropolix is sure to become a staple source of fresh ideas and killer riffs in your creative process.

Width: 34HP
Depth: 25mm
Power: 95mA @ +12V 10mA @ -12V

On first blush, it appears to be a simple 8-stage sequencer - but there is far more functionality than first meets the eye:

There are two tracks (TRK 1 and TRK 2) that are variants of the single master pitch/gate sequencer, which is programmed via the PITCH sliders, PULSE COUNT and GATE TYPE switches. Each track interprets the master sequence in a variety of ways - creating complementary sequence variations that enable you to generate counterpoint, polyrhythms, and all manner of sonic movement (both subtle and extreme). Each of these tracks has its own playback ORDER, sequence LENgth, clock DIVision, SWING amount, SLIDE time, and track GATE lengths. Other track-based sequence variables are accessible from the TRACK MENU, and include Pitch Slider inversion; sequence note range; track transposition; and more. In addition, Tracks 1 & 2 both have multiple lanes of per-stage playback parameters, including: GATE override; PITCH override; RATCHet count; PROBability of playback; ACCUMulating transposition, and a dedicated CV lane. Each stage also has a SKIP feature, and a pitch SLIDE option.

8 separate and individual MODulation lanes are accessed via the MOD button. Each MOD lane has 8-stages of modulation values and its own playback ORDER, LENgth, and clock DIVision; and each lane is routable to one of Metropolix' two assignable outputs or to dozens of internal destinations, allowing for some sophisticated and powerful self-modulation.

A trio of AUX inputs allows for external modulation of user-assignable sequencer parameters for even greater variation, while two assignable CTRL knobs give you direct access to the parameters you want to adjust most frequently during a performance. With dedicated Pitch/Gate outputs for both Track 1 and Track 2; two totally user-assignable outputs (A and B); and internal MOD routing, Metropolix features a wealth of patching opportunities.

Metropolix also features a Loopy mode, allowing you to instantly play back short sub-sequences, or even "play" the stage buttons directly (like a 'keyboard').

Metropolix stores up to 64 preset configurations (in 8 banks of 8 presets), and all live settings are stored in EPROM, ensuring that your Metropolix will always power up exactly as you left it - even if you haven't saved them to a preset. By default presets can change all the structural (menu-based) elements of your sequencer without overwriting the front panel controls, but full recall is also available.

The operation of the Metropolix is optimized for live performance and jamming, with quick access to all the most important performance parameters, and the ability to greatly affect your sequences with a single slider or switch.

Notes: Ideal for house parties, the tiny Party Mix II is the second generation of Numark's compact DJ controller. It's a tiny little device with a built-in LED light show to set the mood. Check out the Party Mix Live for a similar unit with built-in speakers.

Supplier's Notes:
The Party Continues

The original Party Mix quickly became one of the best-selling DJ controllers of all time. The Party Mix II takes the legacy to the next level with even more pro-level features added to the mix! The Party Mix II is always ready for a good time. Simply plug in your laptop or mobile device and start mixing your ultimate party playlist. With the flick of a switch, the built-in light show takes things to the next level with a colorful light show that dances to the beat.

Numark Party Mix DJ controller with light show

The Latest Music is Always on Deck

You no longer need a huge music library to start DJing. The Party Mix II DJ controller works with Serato Lite DJ software, giving you access to streaming services like TIDAL, Beatport LINK, Beatsource LINK, and SoundCloud GO. A streaming DJ controller means that the hottest tracks are available at your fingertips for you to create your custom party playlist.

If you'd rather bring a phone or tablet to the party, the Party Mix II is also compatible with popular DJ mobile apps like djay PRO AI by Algorriddim. Just connect your mobile device to the Party Mix II by using a USB camera connection kit (sold separately) to get the party started.

Party Mix streaming DJ controller partners

Instant Light Show

Set the party atmosphere with a DJ controller with lights! The Party Mix II features three multi-colored LEDs with special wide-coverage lenses for a room-filling, beat-synchronized light show. The switch on the side of the controller allows you to turn the light show on and off whenever you like.

Numark Party Mix DJ controller with built-in light show

Pro DJ Features

The Party Mix II has enough pro-grade features to handle virtually any party. The 1/8-inch main audio output allows you to hook up external speakers to bring your music to life while still monitoring the mix with the 1/8-inch headphone output connection.

DJ performance pads on Party Mix controller

Four performance pads on each deck allow quick access to cue points, loops, effects or samples. In addition to Play and Cue buttons on each deck, Sync buttons allow for the automatic tempo matching of two tracks for perfectly aligned mixes. Dedicated Filter knobs on each deck help add a pro-grade sound to your mixes, and the software-adjustable crossfader allows for sharp cuts for scratches or long, smooth fades for mixes.

DJ scratching on Party Mix controller

The Party Mix II also features two large, high-quality jog wheels that respond to your touch and allow you to manipulate your music with style. Backspin, pause, and even scratch your tracks as you work your way through your party playlist. The outer rings of the wheels function as a pitch-bend so that you can nudge tracks into alignment for the perfect mix.

With the Numark Party Mix II DJ controller, the party never stops!

Outputs:
1 1/8" (3.5 mm) TRS Main output
1 1/8" (3.5 mm) TRS Headphone output

Power: via USB
Dimensions (width x depth x height): 12.8" x 7.8" x 2" 325.5 x 199 x 51 mm
Weight: 2.1 lb 0.95 kg

Minimum system requirements:

Computers/Laptops:

Operating System
macOS Catalina 10.15
macOS Mojave 10.14
macOS High Sierra 10.13
Windows 10

Processor Minimum Requirement: i3: 1.07GHz i5: 1.07GHz i7: 1.07GHz i9: 1.07GHz
Screen Resolution: 1280 x 720
Memory: 4 GB

Mobile Devices:

iPhone: Requires iOS 12.2 or later.
iPad: Requires iPadOS 12.2 or later.
iPod touch: Requires iOS 12.2 or later.

Notes: A typically unique take on multi-effects from Soma, designed to induce meditative states. Hybrid analogue-digital delay/reverb/granular processing gives a range of creative approaches.

Supplier's Notes:
COSMOS is a drifting memory station designed to work with meditative states through music. The design of the controls, functions and generated soundscapes are intended to evoke, in both performer and listener, states and experiences inherent in meditation, such as limitless space, fluidity, spontaneous development, presence, the ability to hear, tranquility, the experience of subtle harmony and happiness enveloping the whole world.

From a functional point of view, COSMOS is a large array of sound memory, in which recorded sounds undergo constant recombinations, spontaneously generating an ever-changing soundscape. This is achieved in three ways - by a mathematical shift based on the relationships between large prime numbers (the size of all delay lines are different primes), an asynchronous operation of the LFO, and modulation with a slowly changing chaotic signal. As a result, it allows the endless layering and processing of various sounds, as in a looper, but without an intrusive, repetitive loop.

COSMOS generates rich, fluid and evolving soundscapes perfect for ambient music. Using COSMOS, you can play an entire meditative solo concert while being in a spontaneous flow and without using studio-prepared sequences, backing tracks and other things that can't be a reflection of the "here and now".

Specifications

Minimum input voltage: 0.35 V peak-to-peak
Maximum output voltage at line outputs: 11.3 V peak-to-peak
The maximum output voltage at the headphones output: 10.4 V peak-to-peak
Frequency response: 10-22000 Hz
Sound memory: 44.7 sec
Supply voltage: 12 V *
Power connector polarity: centre plus
Current consumption: 0.25 A
Dimensions: 342 x 153 x 68 mm
Weight: 2.2 kg

* Use only the power supply supplied with the device! In case of failure, it can be replaced with a high-quality modern switched-mode power supply with an output voltage of DC 12 volts, the center is plus and an output current of at least 0.5 amperes (more is fine). The power supply must have a wide AC input voltage range of 100-240 volts. Such power supplies have excellent output voltage stabilization required for the device. It is forbidden to use COSMOS with nonstabilized voltage from transformer power supplies. It can lead to damage to the device, which is not covered by the warranty repair!

Notes: Dr. Suzuki presents the versatile Mix Edition Slipmats.

From Dr. Suzuki, the creator of the best-selling D-Styles Tablecloth comes the versatile Mix Edition Dr. Suzuki Slipmats. These slipmats were created especially for mix and routine DJs that need more control and find the Scratch Edition slipmats too slick. When compared to scratch specific slipmats, the Dr. Suzuki Mix Edition slipmats are noticeably thicker and engineered to resist shock and agitation.

These sturdy anti-static mats also minimize the noise made when controlling the record for smoother mixes and performance. It also features a diameter slightly shorter than the record which prevents the slipmat from sticking to the vinyl when switching records. Scratching is still very possible with these mats (though you might want to add a slipsheet under for a looser feel). Great for DJ-ing of all genres, routines, battles, and digital control records (Serato, Traktor, etc).

Limited edition orange colour!

Notes: A modern classic. Superb little semi-modular monosynth in its own right, but comes alive when paired with other modular gear. A great option for beginners and experienced synth users alike.

Supplier's notes:
The 0-COAST is a single voice patchable synthesizer. Its name reflects the fact that it utilizes techniques from both the Moog and Buchla paradigms (aka "East Coast," and "West Coast," due to their locations), but is loyal to neither and thus implements "no coast synthesis."

While the 0-COAST utilizes classic modular synthesis techniques, it's designed to operate with or without the use of patch cables. The necessary connections have been made from circuit to circuit so it operates as an expressive, musical MonoSynth. Using only the MIDI controller of your choice you could apply new timbres to your existing musical forms!

Using the included Patch Cables you could get more scientific, experimenting with new ways to wire up the circuits. You might even forgo MIDI altogether, disappearing into a cloud of analog FM induced Sidebands and harmonics scattered around a single fundamental drone that has nothing to do with any form of music you've ever known.

Notes: USB socket for charging/powering peripheral devices.

This tiny but handy module connects the USB A connector to the +5V bus on the Intellijel TPS series powered busboards. Allowing 1A or more of current to be supplied to USB devices such as lamps, phone chargers, and usb powered musical devices.

It connects to the bus via supplied two-pin cable.

*Compatible with the TPS30 MAX and TPS80 busboards. TPS30MINI board requires an adapter.

Notes: The Happy Ending Kit is an easy way to get everything needed to start a Eurorack modular system.

The Happy Ending Kit includes:
1 x Z-Rails set plus screws to attach to Z-Ears
1 x uZeus 4HP PSU with 2 x flying bus boards
1 x UK 3-pin mains adapter

Notes: Case for our Disco Antistat record cleaning machine, with two brushes, without drying stand

Notes: 1/4" TRS to 1/4" TRS

This snake is designed to interconnect pro audio gear with balanced phone jacks. It is ideal for use with mixing consoles and patch bays. Features include:

- Nickel-plated plugs for rugged durability and efficient signal transfer
- Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
- OFC spiral shields for effective EMI and RFI rejection and flexibility

Connectors: 1/4" TRS to 1/4" TRS

Notes: High quality audio leads for exceptional sound quality and reliability. Twinned high grade cable comprises 2 insulated pure copper cores and global shielding.

The durable PVC sheath has a soft texture and is reinforced with cotton cord to avoid tangling.

Terminated at one end with a 6.3mm stereo (TRS) jack and at the other end with 2 x 6.3mm mono jack plugs.

Notes: Dual 1 x 3 buffered mult (one audio or cv signal in with multiple buffered outputs).

The output of the first mult is normalled to the input of the second mult to create a 1×6 buffered mult

Notes: The new RIOT LP-TROLLEY 50 is dedicated to the passionate vinyl pros who want to conveniently travel with their records from gig to gig. Crafted from high-grade material components such as the extra-rugged Tarpaulin fabric, PVC-coated zippers and smooth rolling precision inline wheels, it can accommodate up to 50 pieces of 12-inch records and also meets the permitted carry-on luggage size of almost every airline.

Notes: Tonar plastipap antistatic record inner sleeves (25 pieces) are made of super antistatic plastic paper reinforcement inside the plastic. This combination gives you both a dust free anti-static protection for your valuable records as well as additional strenght to avoid folding and creasing of the sleeves when sliding the sleeve in and out of the record album. This model 5311 plastipap is suitable for LP records only (12 inch-30 cm). Tonar plastipap inner sleeves are also available for 45, and 78 RPM records.

Tonar supplies record inner sleeves for 33, 45 and 78 RPM records as well as outer sleeves to protect your valuable album sleeves.

Notes: Tonar Nostatic sleeves. 40 mu HDPE. Suitable for single records only (12 inch" - 30 cm). 50 pieces per pack

Notes: This liquid is the exact same liquid as the Tonar QS Vinyl cleaner, but now supplied in a spray can that is convenient to use for small cleaning jobs together with the TonarWetgoat brush made of pure goats hair.

Notes: Pack of 10 record polythene sleeves (200 gauge strength).

Notes: Mid-range DJ mixer from the leading UK brand. Fully analogue four-channel design with A&H's much-loved Xone filter section. Very tempting alternative to the flagship Xone:96. Excellent value.

Supplier notes:
Created for DJs and electronic music purists, Xone:43 is a 4+1 channel DJ mixer that offers the very best of analogue audio quality, including the legendary Xone filter with resonance control, 3 band EQ, crossfader with three curve settings and X:FX for send/return to your favourite FX unit.

The crossfader has three switchable curve settings for blending or scratching styles and can be easily replaced or upgraded to a custom Innofader for ultimate crossfader performance.

With balanced XLR main outputs, independent booth and record outputs, Xone:43 excels in the club and in high end personal DJ setups.

Notes: Neatly designed slimline DJ MIDI controller from A&H. 52 controls and built-in audio interface. Compatible with any DJ software.

Supplier's notes:
Xone:K2 is a compact, slim line universal MIDI controller - incorporating a 4 channel soundcard, for use with any DJ software.

With no fewer than 52 hardware controls providing up to 171 MIDI commands across 3 layers - plus the ability to link multiple units using X:LINK, saving USB ports on your computer - Xone:K2 has the power and flexibility to put you in touch with the functions and features of your chosen software.

Quick and simple mapping lets you create a unique layout that mirrors your style and puts the functions that matter at your fingertips, whilst 3 colour illuminating switches give at-a-glance feedback - allowing you to work however you decide.

The high quality internal soundcard provides flexible user setup options using the Xone:K2 with headphones, headphones and a mix system or with an external mixer. Xone:K2 comes packed in a black padded case as standard. The case doubles as a stand, bringing the K2 up to the same height as most pro DJ mixers.

Xone:K2 is a compact designed MIDI Controller for use with any DJ software such as Ableton, Virtual DJ, MixVibes, Mixx and Traktor Pro. Xone:K2 can even be used to control lights or VJ software - if it can receive MIDI data it can take commands from K2. What each control does is entirely up to you - you can create a completely customised layout that perfectly fits the way you want to work. Xone:K2 has 52 physical controls - including 12 analogue and 6 endless rotary encoders with push switch, 4 linear faders, and 30 backlit performance switches - providing up to 171 MIDI control commands across 3 layers. We also provide example maps to get you started out the box and information on how to set up your own.

A Latching Layers system lets you assign controls to multiple layers, so a single physical control can be given up to 3 functions. You can configure all, some or none of K2's controls to be linked to the Latching Layers system. As a quick visual reminder, when toggling through layers all switches assigned to a particular layer will illuminate in the appropriate colour.

Xone:K2 has a high quality internal, four channel (2 stereo) 48kHz soundcard. Setup options include using the K2 with a pair of headphones, feeding a pair of headphones and a PA system, or connecting to an external DJ mixer.

Its slim line chassis, soft touch controls and minimal looks set K2 apart from the pack. There's plenty of substance too - Xone:K2 is built to Allen & Heath's renowned touring grade audio and build quality standards, including the use of steel nuts on all rotary controls to protect the circuitry from impact damage.

Xone:K2 comes packed in a black padded case as standard. As well as keeping it safe on the road, the case doubles as a stand, elevating the K2 up to the same height as most pro DJ mixers.

Two or more K2s can be linked via our X:LINK protocol, expanding the control capability. X:LINK uses a standard RJ45 connector and distributes power and data, allowing connection to X:LINK compatible devices, including Xone:DB4 and DB2, to expand MIDI data without using additional USB ports.

Notes: This new line of performance vinyl features a re-mastered Serato NoiseMap Control Tone that is 6db louder than existing pressings, allowing for precise tracking, better vinyl wear and the most authentic feeling digital vinyl experience on the market. The new Performance Series pressings are packaged as a double set and feature a wide range of new colours.

Vinyl is a strange old girl. The manufacturing process - one part sweat, one part maths and one part magic, is not an exact science. While every record pressed is a high quality product and will perform flawlessly, there can be some variation in the colour throughout a run. Every record is unique.

*** PLEASE NOTE: AS WITH ALL COLOURED VINYL, THERE MAY BE SLIGHT TRACES OF OTHER COLOURS WITHIN THE VINYL. THIS IS NORMAL AND DOES NOT MEAN THE VINYL IS DEFECTIVE. IT DOES NOT ADVERSELY AFFECT THE PRESSING IN ANY WAY AND RETURNS OF THIS NATURE CANNOT BE ACCEPTED ***

Notes: High quality audio leads for exceptional sound quality and reliability. High grade cable comprises 2 insulated pure copper cores and global shielding. The durable PVC sheath has a soft texture and is reinforced with cotton cord to avoid tangling. Terminated at one end with a 3.5mm stereo (TRS) jack and at the other end with a 6.3mm stereo (TRS) jack plug.

Notes: High quality audio leads for exceptional sound quality and reliability. Twinned high grade cable comprises 2 insulated pure copper cores and global shielding. The durable PVC sheath has a soft texture and is reinforced with cotton cord to avoid tangling. Terminated at one end with a 3.5mm stereo (TRS) jack and at the other end with 2 x RCA phono connectors.

Notes: High quality audio leads for exceptional sound quality and reliability. Twinned high grade cable comprises 2 insulated pure copper cores and global shielding. The durable PVC sheath has a soft texture and is reinforced with cotton cord to avoid tangling. Terminated at one end with a 3.5mm stereo (TRS) jack and at the other end with 2 x RCA phono connectors.

Notes: High quality audio leads for exceptional sound quality and reliability. High grade cable comprises 2 insulated pure copper cores and global shielding. The durable PVC sheath has a soft texture and is reinforced with cotton cord to avoid tangling. Terminated at one end with a 3.5mm stereo (TRS) jack and at the other end with a 6.3mm stereo (TRS) jack plug.

Notes: The high quality record sleeve is complete with centre holes, with 5mm spine which allows the use of paper inner sleeve.

***Pack of 50***

Notes: A good delay was an essential part of the classic analog synthesizer sound. More often than not, that delay came from a tape-style echo machine until affordable digital delays were created. The Monotron Delay is an analog synthesizer optimized for sound effects. In addition to its analog oscillator, filter and LFO, it also provides a space delay that's indispensible for swooping, cosmic sounds. The monotron Delay even reproduces the pitch changes that occur when you vary the delay time, just as though you were using an analog tape echo. This fat and warm delay will add an authentic edge to your analog sounds.

It also features Korg's class VCF filter for full control over your sounds. The distinctive tone of an analog filter (VCF) can dramatically alter and enrich the sound. The Monotron Delay uses the same highly acclaimed VCF circuit as Korg's classic MS-10 and MS-20 semi modular synthesizers. Originally released over 30 years ago, these instruments are still coveted today for their aggressive, dynamic filters. The VCF Cutoff knob sets the frequency or tone of the filter; the VCF Peak knob adds emphasis. A powerful filter is an essential aspect of any analog synthesizer, applying dramatic tonal changes to the sound, and projecting an intense personality that will stand out in any live performance.

Create classic sounding analogue tape delays to add warms and new dimensions to your synth sounds. Also included is Korg's fantastic enhanced ribbon controller keyboard, while a mini jack input also allows you to run any external audio, such as a Kaossilator, digital piano or guitar, through the Monotron Duo. As standard, the Monotron range comes with a powerful built-in speakers and is battery operated for the ultimate portable experience.

The Low Frequency Oscillator (LFO) waveform used to modulate the pitch now offers a choice of waveshapes, which is a new square wave plus the traditional triangle wave. Both the rate (speed) and the intensity (depth) can be adjusted independently. In addition, a trimpot on the back panel can continuously adjust the shape/direction of the triangle wave or the pulse-width of the square wave to deliver even more versatility. Used in conjunction with the delay, the LFO can create dazzling effects and provide unique possibilities for embellishing your songs.

The Monotron Delay's ribbon controller keyboard features a wide, 4-octave range. This design allows the pitch to be controlled even more aggressively and dynamically, making the Monotron Delay a great weapon for a DJ to get the floor moving with irresistible sound. The reversed white keys and body adornments glows under black light illumination, making the monotron Delay ideal for delivering a striking visual impact in nearly any club environment.

The input jack (AUX input) built into the Monotron Delay's compact body allow you to place any audio source into the Monotron Delay's signal path, directly before the analog filter and delay circuit. This provides a great way to connect a Kaossilator, a guitar, or a digital audio player to the Monotron and enjoy tone-bending filter and delay effect.

A miniature speaker is built into the Monotron Delay. Along with the battery operation and compact size, this feature allows you to enjoy the share the Monotron Delay's analog synthesis sound with your friends, anywhere, at any time. There's also a headphone output that you can use when practicing in private, creating sounds at home, recording, or for connecting to an amplifier or PA system.

Notes: The Chord cable lead is the high quality audio lead for exceptional sound quality and reliability. The high grade cable comprises 2 insulated pure copper cores and global shielding. The durable PVC sheath has a soft texture and is reinforced with cotton cord to avoid tangling. Each end is terminated with a pro-quality 6.3mm stereo (TRS) jack plug.

Notes: The Chord Classic Twin RCA To Twin RCA Lead (3.0m) is a high quality audio cable for exceptional sound quality and reliability. High grade twin cable comprises an insulated pure copper core and global shielding. The durable PVC sheath has a soft texture to avoid knotting. It is terminated at each end with a pair of RCA phono plugs.

Notes: With the Spin-Cleanr MKII standard unit and included accessories, you're ready to begin removing the grime from your grooves.

Whilst there are cheaper record cleaning brushes available on the market, the Spin Clean Record Washer system is by far the best in terms of removing dust, fingerprints and static from your LP records.

The kit comprises fluid bath, a 4oz bottle of cleaning fluid, lint-free drying cloths, 1 pair of brushes, 1 pair of rollers and an instruction manual.

Spin Clean Record Washer System Mk II achieves amazingly effective cleaning power of records due to the special cleaning fluid that grabs hold of the dirt and makes it sink to the botton of the fluid tank, ensuring that your records remain uncontaminated during the cleaning process. Both sides of the record are sleaned at the same time by the Spin Clean Record Washer System Mk II.

The cleaning process is as follows: fill the bath with cleaning fluid, Spin the record three times, then dry off the record with the lint free cloths. Simple and effective. There are no power requirements for the Spin Clean Record Washer System Mk II.

Notes: The Replacement washer fluid is designed for the Spin Clean Record Washing System MK II. This cleaning fluid is a unique formula that lifts dirt and keeps your records safe and sparkling.

Note: The fluid used in the Record Washer System does not contain alcohol, so it is fine to be used with 78RPM records.

Notes: Spare padding for HD25 headband from Sennheiser. It should be noted that two are required as the headband on this model is split.

Notes: Inner sleeve for 12" vinyl records.

Notes: The lightweight and affordable stereo headphones feature an adjustable headband and a 1.25m lead with 3.5mm stereo jack plug. Ideal for educational, tour company or home use.

Ideal for use by students, tour companies or in the home
Compatible with computers, MP3 players and other equipment
Lightweight design with adjustable headband for comfort
Featuring a generous 1.25m lead for greater flexibility

Notes: Spare cable for Sennheiser HD25 headphones, with custom 3.5mm mini-jack.

Notes: The SlingBag is a medium size bag that holds approximately 50 Vinyl records or a (MIDI) controller, an Audio Interface, a Headphone and cables. A perfect bag for the starting DJ.

It has a pocket on each side and one full size pocket in the front. Next to this the bag features the special steel bolts which make it impossible for grips and straps to break loose from the bag. The SlingBag can be used as a set in combination with the UDG SlingBag Trolley. A perfect size bag for a quick DJ set!

*Photographed records are not included

Notes: The Glorious 12" record box 230 is a plain and solid storage system which holds 230 12" records. It is made of quality MDF wood with black shrink-wrap finish.

Notes: The Glorious 12" record box 55 is a plain and solid storage system for 12" records which holds 55 12" records. It is made of quality MDF wood with black shrink-wrap finish.

Notes: A stylus that meets the high demands of DJs.

The special heavy-duty suspension of the headshell and the spherical diamond guarantee reliable tracking. An integrated weight ring creates heaviness thus allowing high bearing strength.

The design allows easy installation on all drives with SME-Disco Connection: Tighten the plug in screw cap on the tone arm, adjust contact pressure and even the professional record no bounds are set.

Notes: This cable is designed to connect gear with XLR outputs to gear with XLR inputs. It is ideal for use in touring and other live-sound applications.

Hosa cables are built with the hard-working, hard-touring musician or audio professional in mind. Hosa cables are exceedingly popular, due in part to their reputation as being one of the most affordable and high-quality cable lines in the business. Hosa cables have also received praise for their durability and excellent performance. When it comes to audio cable design, Hosa keeps a steady eye on the basics, and you can hear this attention to detail in their sound. To make your next music experience extraordinary, pick up a Hosa cable today.