Back catalogue: Studio Equipment

Notes: Audio Optimized USB-A to USB-B Cables

Dual slimline ferrites prevent signal dropouts
Gold connectors ensure long cable life
Available in 8 colours and 2 types

Ideal for home and professional use where impeccable audio is a must, Chroma Cables complement the modern DJ and music production technology with a streamlined styling that keeps your setup looking fresh and sleek. All cables are not created equal, and these are engineered from scratch for digital performers, by digital performers.

Noise-Filtering Features

Each cable has two ferrite core chokes, one at each end of the cable. Paired with fully-braided shielding, Chroma Cables do a great job of eliminating interference along the signal path - making these the best USB cables for DJs.

Two Styles, Eight Colours

Cables come in straight and right-angle options. The angled cable helps to prevent accidental removal and takes up less space, giving you a less crowded DJ booth. Label gear by colour so you always know your soundcard from your controller.

Always Strapped

Even after placing your cables neatly in your bag, it's easy to wind up with a tangled clump of cables. The built-in velcro cable strap helps prevent this, keeping your gig bag nice and tidy. You'll wonder how you managed without this.

Compatibility Notes:

Works with all* USB devices with a USB type B connector but it's worth checking for obstructions if you plan on ordering an angled cable.

*Please note that the right angle cable won't work with a Kontrol D2, S2, S4, S5, S8, or Z1 or Traktor Audio 10 while using the power supply.

Size + Weight:
Length: 59.05" / 150cm
Weight: 0.18lb / 0.08kg"

Notes: Audio Optimized USB-A to USB-B Cables

Dual slimline ferrites prevent signal dropouts
Gold connectors ensure long cable life
Available in 8 colours and 2 types

Ideal for home and professional use where impeccable audio is a must, Chroma Cables complement the modern DJ and music production technology with a streamlined styling that keeps your setup looking fresh and sleek. All cables are not created equal, and these are engineered from scratch for digital performers, by digital performers.

Noise-Filtering Features

Each cable has two ferrite core chokes, one at each end of the cable. Paired with fully-braided shielding, Chroma Cables do a great job of eliminating interference along the signal path - making these the best USB cables for DJs.

Two Styles, Eight Colours

Cables come in straight and right-angle options. The angled cable helps to prevent accidental removal and takes up less space, giving you a less crowded DJ booth. Label gear by colour so you always know your soundcard from your controller.

Always Strapped

Even after placing your cables neatly in your bag, it's easy to wind up with a tangled clump of cables. The built-in velcro cable strap helps prevent this, keeping your gig bag nice and tidy. You'll wonder how you managed without this.

Compatibility Notes:

Works with all* USB devices with a USB type B connector but it's worth checking for obstructions if you plan on ordering an angled cable.

*Please note that the right angle cable won't work with a Kontrol D2, S2, S4, S5, S8, or Z1 or Traktor Audio 10 while using the power supply.

Size + Weight:
Length: 59.05" / 150cm
Weight: 0.18lb / 0.08kg"

Notes: Audio Optimized USB-A to USB-B Cables

Dual slimline ferrites prevent signal dropouts
Gold connectors ensure long cable life
Available in 8 colours and 2 types

Ideal for home and professional use where impeccable audio is a must, Chroma Cables complement the modern DJ and music production technology with a streamlined styling that keeps your setup looking fresh and sleek. All cables are not created equal, and these are engineered from scratch for digital performers, by digital performers.

Noise-Filtering Features

Each cable has two ferrite core chokes, one at each end of the cable. Paired with fully-braided shielding, Chroma Cables do a great job of eliminating interference along the signal path - making these the best USB cables for DJs.

Two Styles, Eight Colours

Cables come in straight and right-angle options. The angled cable helps to prevent accidental removal and takes up less space, giving you a less crowded DJ booth. Label gear by colour so you always know your soundcard from your controller.

Always Strapped

Even after placing your cables neatly in your bag, it's easy to wind up with a tangled clump of cables. The built-in velcro cable strap helps prevent this, keeping your gig bag nice and tidy. You'll wonder how you managed without this.

Compatibility Notes:

Works with all* USB devices with a USB type B connector but it's worth checking for obstructions if you plan on ordering an angled cable.

*Please note that the right angle cable won't work with a Kontrol D2, S2, S4, S5, S8, or Z1 or Traktor Audio 10 while using the power supply.

Size + Weight:
Length: 59.05" / 150cm
Weight: 0.18lb / 0.08kg"

Notes: Audio Optimized USB-C to USB-B Cables

56kO pull-up resistor to protect your devices
Dual slimline ferrites prevent signal dropouts
High quality connectors ensure long cable life
Works with all USB-B devices

Ideal for home and professional use where impeccable audio is a must, Chroma Cables complement the modern DJ and music production technology with a streamlined styling that keeps your setup looking fresh and sleek. All cables are not created equal, and ours are engineered from scratch for digital performers, by digital performers.

Noise-Filtering Features

Each cable has two ferrite core chokes, one at each end of the cable. Paired with fully-braided shielding, Chroma Cables do a great job of eliminating interference along the signal path - making these the best USB cables for DJs.

No More Adapters

Forget about tiny adapters that can easily get lost in a dark booth. These high quality USB-C cables ensure that all your audio and MIDI devices have a reliable connection with no compromises.

Always Strapped

Even after placing your cables neatly in your bag, it's easy to wind up with a tangled clump of cables. The built-in velcro cable strap helps prevent this, keeping your gig bag nice and tidy. You'll wonder how you managed without this.

Compatibility Notes:

Works with all* USB devices with a USB type B connector but it's worth checking for obstructions if you plan on ordering an angled cable.

*Please note that the right angle cable won't work with a Kontrol D2, S2, S4, S5, S8, or Z1 or Traktor Audio 10 while using the power supply.

Size + Weight:

Length: 59.05" / 150cm
Weight: 0.18lb / 0.08kg"

Notes: Audio Optimized USB-C to USB-B Cables

56kO pull-up resistor to protect your devices
Dual slimline ferrites prevent signal dropouts
High quality connectors ensure long cable life
Works with all USB-B devices

Ideal for home and professional use where impeccable audio is a must, Chroma Cables complement the modern DJ and music production technology with a streamlined styling that keeps your setup looking fresh and sleek. All cables are not created equal, and ours are engineered from scratch for digital performers, by digital performers.

Noise-Filtering Features

Each cable has two ferrite core chokes, one at each end of the cable. Paired with fully-braided shielding, Chroma Cables do a great job of eliminating interference along the signal path - making these the best USB cables for DJs.

No More Adapters

Forget about tiny adapters that can easily get lost in a dark booth. These high quality USB-C cables ensure that all your audio and MIDI devices have a reliable connection with no compromises.

Always Strapped

Even after placing your cables neatly in your bag, it's easy to wind up with a tangled clump of cables. The built-in velcro cable strap helps prevent this, keeping your gig bag nice and tidy. You'll wonder how you managed without this.

Compatibility Notes:

Works with all* USB devices with a USB type B connector but it's worth checking for obstructions if you plan on ordering an angled cable.

*Please note that the right angle cable won't work with a Kontrol D2, S2, S4, S5, S8, or Z1 or Traktor Audio 10 while using the power supply.

Size + Weight:
Length: 59.05" / 150cm
Weight: 0.18lb / 0.08kg"

Notes: Audio Optimized USB-C to USB-B Cables

56kO pull-up resistor to protect your devices
Dual slimline ferrites prevent signal dropouts
High quality connectors ensure long cable life
Works with all USB-B devices

Ideal for home and professional use where impeccable audio is a must, Chroma Cables complement the modern DJ and music production technology with a streamlined styling that keeps your setup looking fresh and sleek. All cables are not created equal, and ours are engineered from scratch for digital performers, by digital performers.

Noise-Filtering Features

Each cable has two ferrite core chokes, one at each end of the cable. Paired with fully-braided shielding, Chroma Cables do a great job of eliminating interference along the signal path - making these the best USB cables for DJs.

No More Adapters

Forget about tiny adapters that can easily get lost in a dark booth. These high quality USB-C cables ensure that all your audio and MIDI devices have a reliable connection with no compromises.

Always Strapped

Even after placing your cables neatly in your bag, it's easy to wind up with a tangled clump of cables. The built-in velcro cable strap helps prevent this, keeping your gig bag nice and tidy. You'll wonder how you managed without this.

Compatibility Notes:

Works with all* USB devices with a USB type B connector but it's worth checking for obstructions if you plan on ordering an angled cable.

*Please note that the right angle cable won't work with a Kontrol D2, S2, S4, S5, S8, or Z1 or Traktor Audio 10 while using the power supply.

Size + Weight:
Length: 59.05" / 150cm
Weight: 0.18lb / 0.08kg"

Notes: Add a splash of colour to your setup with six colour options.

USB-C 3.2 Gen 2, 10Gbps data rate with up to 100W Power Delivery

Dual ferrite cores help prevent high-frequency noise from outside sources

1.0m/3.2ft length allows for connecting gear while still maintaining full power delivery and data rates

56kO pull-up resistor to protect your devices

Chroma Tie velcro strap included for easy cable management and storage.

DJ Tech Tools have been making great USB data cables for professional performers and artists since 2011. By popular demand, the cable line has been brought to the USB-C universe, adding a much-needed affordable, good looking, and high quality USB 3.2 cable.

Notes: Add a splash of colour to your setup with six colour options.

USB-C 3.2 Gen 2, 10Gbps data rate with up to 100W Power Delivery

Dual ferrite cores help prevent high-frequency noise from outside sources

1.0m/3.2ft length allows for connecting gear while still maintaining full power delivery and data rates

56kO pull-up resistor to protect your devices

Chroma Tie velcro strap included for easy cable management and storage.

DJ Tech Tools have been making great USB data cables for professional performers and artists since 2011. By popular demand, the cable line has been brought to the USB-C universe, adding a much-needed affordable, good looking, and high quality USB 3.2 cable.

Notes: Add a splash of colour to your setup with six colour options.

USB-C 3.2 Gen 2, 10Gbps data rate with up to 100W Power Delivery

Dual ferrite cores help prevent high-frequency noise from outside sources

1.0m/3.2ft length allows for connecting gear while still maintaining full power delivery and data rates

56kO pull-up resistor to protect your devices

Chroma Tie velcro strap included for easy cable management and storage.

DJ Tech Tools have been making great USB data cables for professional performers and artists since 2011. By popular demand, the cable line has been brought to the USB-C universe, adding a much-needed affordable, good looking, and high quality USB 3.2 cable.

Notes: Add a splash of colour to your setup with six colour options.

USB-C 3.2 Gen 2, 10Gbps data rate with up to 100W Power Delivery

Dual ferrite cores help prevent high-frequency noise from outside sources

1.0m/3.2ft length allows for connecting gear while still maintaining full power delivery and data rates

56kO pull-up resistor to protect your devices

Chroma Tie velcro strap included for easy cable management and storage.

DJ Tech Tools have been making great USB data cables for professional performers and artists since 2011. By popular demand, the cable line has been brought to the USB-C universe, adding a much-needed affordable, good looking, and high quality USB 3.2 cable.

Notes: A-100SSB is a combination of power supply and bus board with 8 connectors for A-100 modules, planned for applications with up to 8 modules and a max. current of 380 mA.

- Wide range mains voltage input 100-240V AC / 50-60 Hz
- IEC inlet on board for the connection of a suitable mains cable (a suitable mains cable has to be purchased by the customer locally, it's not included with the A-100SSB)
- Switching supply with +12V/380 mA and -12V/380mA for the operation of A-100 modules up to 380 mA total supply current
- Safety cover at the bottom side (covers all elements that lead mains voltage)
- On board fuse
- 8 bus connectors
- LED displays for +12V, -12V and +5V
- Dimensions: about 270 mm (length) x 55 mm (width) x 35 mm (height)
- Several 3mm holes for mounting the unit on a rear panel or bottom plate

Notes: High quality rotary knob, for use with Doepfer or a wide range of modules. Robust design with indented edges. Green finish.

Notes: High quality rotary knob, for use with Doepfer or a wide range of modules. Robust design with indented edges. Grey finish.

Notes: High quality rotary knob, for use with Doepfer or a wide range of modules. Robust design with indented edges. Red finish.

Notes: High quality rotary knob, for use with Doepfer or a wide range of modules. Robust design with indented edges. Yellow finish.

Notes: High quality rotary knob, for use with Doepfer or a wide range of modules. Robust design with indented edges. Retro style finish.

Notes: Blank panel, 1HP, constructed from anodised aluminium, silver.

Notes: Blank panel, 1.5 HP, constructed from anodised aluminium, silver.

Notes: Blank panel, 2HP, constructed from anodised aluminium, silver.

Notes: Blank panel, 4HP, constructed from anodised aluminium, silver.

Notes: Blank panel, 42HP, constructed from anodised aluminium, silver.

Notes: Blank panel, 4HP, constructed from anodised aluminium, black.

Notes: Blank panel, 8HP, constructed from anodised aluminium, silver.

Notes: Bus board to connect 14 modules

An assembled and tested bus board, 22 sockets, e.g. for customers who want to built their own case and need a bus board for A-100 modules, includes cables for connection to +/-12V power supply (4 wires with flat connectors on both ends, length about 30cm), but no mechanical parts (e.g. screws, spacers, nuts, washers).

In the new version of the A-100 bus board (labeled Version 6 / 2019) boxed pin headers are used which are equipped with a reverse protection (gap for the "nose" of the socket of the bus cable). When the bus cable coming from the module is connected to the boxed header in question the "nose" has to point to the right. The polarity of the cable is correct if the red wire of the bus cable then points to the bottom (to the continuous line labeled"RED WIRE" on the pc board). If this is not the case please do not connect the module to the bus board ! Otherwise both the module and the power supply (A-100PSU3) may be damaged ! In that case please contact the manufacturer of the module and ask for a suitable bus cable with the correct polarity of the connector.

The bus cables of original A-100 modules manufactured by Doepfer are equipped with suitable bus cables since 2012. Only for older A-100 modules manufactured before 2012 it may happen that the polarity of the 16 pin female connector of the bus cable is wrong (nose points to the left when red wire points to the bottom). This is because in the past unboxed pin headers were used and the position of the "nose" did not matter. In such a case please contact Doepfer or one of their dealers and order a suitable bus cable.

Notes: The A-100LC1v is a smaller version of the A-100LC3 with 48 HP of space. It is made out of raw wood, a black coating gives the Eurorack frame a vintage look. The built-in power supply, type A-100SSB, delivers up to 380 mA at +12 V and -12 V as well as 100 mA at +5 V.

The A-100LC1v comes equipped with one 48 HP measuring row for 3U modules. Its power supply features eight connectors for oscillators, filters and so forth. The case is connected to the grid via an IEC power socket.

Notes: ***B-STOCK: Box damaged, but product is in excellent condition and in perfect working order***


Inspired by the legendary Roland TB-303, the B1 is a bargain-priced analogue acid and bass synth, featuring a built-in sequencer plus saturation and delay effects to bring your sound to life. Incredible value.

Supplier's Notes:
Donner B1 Analogue Bass Synthesizer & Sequencer with VCF, Saturation and Delay Effects

In order to provide better use experience, Donner B1 analog bass synthesizer has made unprecedented innovation in the operation interface, provide simpler and more intuitive interface for all music lovers. And this innovation won the 2022 reddot design award.

Beginner-Friendly Synthesizer Interface

Donner have optimized the sequencer of this synthesizer to be easier and more intuitive to use. Easily edit your own sequences with 128 sequence presets covering a range of musical styles, and 128 user programmable presets.

Silicone Tactile Keyboard with Backlight

The Donner B1 sequencer features modern silicone keys with a color changing backlight, making them a joy to play. In addition to sequencing, you can also play your synth lines live with the keys.

Classic Deep Bass Tone With Saturation and Delay Effects

The B1 allows you to dial in classic deep bass tones such as, distortion and tape delay. It will give you the taste of being one of the famous EDMs, Hip-Hop DJs or producers.

Flexible and Versatile Music Studio at Your Fingertips

The B1 controller connects to your DAW via USB-MIDI for use as a MIDI keyboard, and the MIDI IN/OUT interface connects the B1 to your external MIDI devices for sequencing or as a MIDI controller.Connect external sound sources using the 1/8" audio input. The 1/4" TS mono Main Out carries the main output signal. The 1/8" headphone jack is perfect for monitoring your sound. The B1's audio I/O options have you covered.

The B1 controller & sequencer features all of the deep bass and acid synthesizer sounds of the classic synth, but brings it back in a more intuitive format. Our B-1 bass synth gives you the perfect combination of retro and new school cool.

Specifications

Number of Voices: Monophonic
Type: Analog
VCF: 1 low pass
Oscillators: 1
Size: 54×323×130mm - 0.62kg (1.37 lbs)
Control Knobs: SATURATION knob, DRIVE knob, TONE knob, DELAY knob, LEVEL knob, TIME knob, FEEDBACK knob
Control Buttons: UP and DOWN, TRANSPOSE, PATTERN, TEMPO/TAP, PLAY/STOP, CLEAR, WRITE, BAR, SIGNATURE, DOTTED
Power Input: DC input connector
Power Adaptor: 9VDC 500mA inner positive
MIDI IN/OUT: MIDI In & MIDI Out, 5-pin IN
USB (MIDI): USB 2.0, Type C
Outputs: Line output: 1/4' TRS
Headphones: 3.5mm TRS
Supported Operating Systems: Win 7 or higher / Mac OS X 10.6.8 or higher
Inputs & Outputs (TS 3.5mm): AUX in: maximum input +5 dBu, Sync in: More than 2.5V
Number of Voices: Monophonic
Type: Analogue
VCF: 1 low pass
Oscillators: 1
Size: 54×323×130mm 0.62kg (1.37 lbs)
Control Knobs: SATURATION knob, DRIVE knob, TONE knob, DELAY knob, LEVEL knob, TIME knob, FEEDBACK knob
Control Buttons: UP and DOWN, TRANSPOSE, PATTERN, TEMPO/TAP, PLAY/STOP, CLEAR, WRITE, BAR, SIGNATURE, DOTTED
Power Input: DC input connector
Power Adaptor 9VDC 500mA inner positive
MIDI IN/OUT: MIDI In & MIDI Out, 5-pin IN
USB (MIDI): USB 2.0, Type C
Outputs: Line output: 1/4' TRS
Headphones: 3.5mm TRS
Supported Operating Systems: Win 7 or higher / Mac OS X 10.6.8 or higher
Inputs & Outputs (TS 3.5mm): 3.5mm TRS

Notes: Reissued version of one of Dreadbox's back catalogue synths, the Erebus is a paraphonic design with two VCOs, a characterful low-pass filter, built-in delay and updated snappy envelopes.

Supplier's Notes:
Dreadbox's most unique sounding analogue synthesizer is finally back, warmer and snappier than ever!

All you synth lovers, the time has come to dive into the Erebus...

All Analogue Paraphonic Synthesizer
Faithful Reproduction of the Erebus V1
2 Oscillators with 2 Waveforms each
Separate Glide controls and Hard Sync function
2-pole Low Pass pre-fed Filter
1 ADSR envelope and a AR Amp Envelope
Snappier than the V1

OTA VCA
Lo-Fi Delay effect
Wide Range LFO
15 patch points for an astonishing and spectacular modular experience
Compact, USB powered, Eurorack Format (42HP)

Ethereal & Dreamy

Warm sounding Oscillators
Classic Dreadbox Filter
Snappy Envelope Generators
Lo-Fi Delay effect to expand your sound
CV outputs: Envelope, LFO, Mod Wheel, Gate, CV1, CV2
CV inputs: Osc1, Osc2, Echo, Cutoff, CV, Gate, LFO Rate, PW, VCA

Specifications & Connections

USB powered (1.5 Watts)
50 Playing hours with 20,000mA portable power bank
MIDI IN via DIN5
14 MONO TS Jack Out

Dimensions: 21.5 x 13 x 6.5 cm
Weight: 1 kg

Requirements:

USB-A Adapter (5v) with 1000mA or more
MIDI device or keyboard that is equipped with DIN5 midi output
Monitor, Amp or Headphones

Included in the box:

Erebus Eurorack module
42 HP case
1x DIN5 to 3.5mm adapter
1x Ribbon cable

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


Dreadbox go back to their roots with this reissued analogue beast. Simple but effective single-oscillator monophonic design with a three-pole resonant filter and analogue distortion.

Supplier's Notes:
Dreadbox's highly anticipated Bass Synthesizer is finally back.

Its Deep and Dark sound is here to haunt you ...

All Analogue Bass Synthesizer
Faithful Reproduction of the 2016 Hades
1 Oscillators with 2 Sub Octaves and 2 Waveforms with PW control
3-pole Resonating Low Pass Filter
1 AD/RS envelope and a AR Amp Envelope

OTA VCA
OTA Distortion
Wide Range Triangle LFO
11 patch points for an astonishing spectacular modular experience
Compact, USB powered, Eurorack Format (42HP)

Monophonic Epicness
Super Fat Oscillator
2x Sub Octaves for extra headroom
Special Internal Bass Boost Circuit
Warm Filter
Drive effect for aggressive sounds
CV outputs: Envelope, LFO, Mod Wheel, 1v/oct
CV inputs: PW, Cutoff, VCA, CV, Gate

Specifications & Connections

USB powered (1.5 Watts)
50 Playing hours with 20,000mA portable power bank
MIDI IN via DIN5
14 MONO TS Jack Out

Dimensions: 21.5 x 13 x 6.5 cm
Weight: 0.9 kg

Requirements

USB-A Adapter (5v) with 1000mA or more
MIDI device or keyboard that is equipped with DIN5 midi output
Monitor, Amp or Headphones

Included in the box

Hades Eurorack module
42 HP case
1x DIN5 to 3.5mm adapter (specs as found at midi.org)
1x Ribbon cable

Notes: Dreadbox go back to their roots with this reissued analogue beast. Simple but effective single-oscillator monophonic design with a three-pole resonant filter and analogue distortion.

Supplier's Notes:
Dreadbox's highly anticipated Bass Synthesizer is finally back.

Its Deep and Dark sound is here to haunt you ...

All Analogue Bass Synthesizer
Faithful Reproduction of the 2016 Hades
1 Oscillators with 2 Sub Octaves and 2 Waveforms with PW control
3-pole Resonating Low Pass Filter
1 AD/RS envelope and a AR Amp Envelope

OTA VCA
OTA Distortion
Wide Range Triangle LFO
11 patch points for an astonishing spectacular modular experience
Compact, USB powered, Eurorack Format (42HP)

Monophonic Epicness
Super Fat Oscillator
2x Sub Octaves for extra headroom
Special Internal Bass Boost Circuit
Warm Filter
Drive effect for aggressive sounds
CV outputs: Envelope, LFO, Mod Wheel, 1v/oct
CV inputs: PW, Cutoff, VCA, CV, Gate

Specifications & Connections

USB powered (1.5 Watts)
50 Playing hours with 20,000mA portable power bank
MIDI IN via DIN5
14 MONO TS Jack Out

Dimensions: 21.5 x 13 x 6.5 cm
Weight: 0.9 kg

Requirements

USB-A Adapter (5v) with 1000mA or more
MIDI device or keyboard that is equipped with DIN5 midi output
Monitor, Amp or Headphones

Included in the box

Hades Eurorack module
42 HP case
1x DIN5 to 3.5mm adapter (specs as found at midi.org)
1x Ribbon cable

Notes: Boutique analogue goodness inspired by chthonic demi-goddesses. Obviously. Six-voice synth engine with fully analogue signal path plus digital reverb. Compact and powerful with a lush, distinctive sound.

Supplier's Notes:
Nymph(e)s are chthonic demi-goddesses who not only personify nature but are regularly associated with the wild.

They inhabit rivers, springs, woods, groves, fields, caves, mountains and valleys.

They preside over fountains, sacred wells and fresh water.

The Polyphonic Synthesizer N Y M P H E S was developed during the obscure pandemic times and we really hope that it will bring a pinch of happiness on your face. Dreadbox have attempted to condense an ambitious idea in a small and compact box, without any compromise in the quality of the final instrument.
The result is stunning and ethereal ...

Features per Voice

1x VCO with Wave Forming
1x Sub Oscillator
Noise generator
1x LFO per voice with: Key track, Fade In and Fade out, 5 waveforms and wide frequency (into the FM range)
2x Envelope Generators
24dB/octave Low Pass Resonant Filter with accurate tracking
6dB/octave High Pass Non-Resonant Filter

Common

Voice Features

1x common LFO (named LFO2) that can target any and multiple parameters with different amount to each one at the same time , with: Key track, Fade In and Fade out, 5 waveforms and Wide Frequency (into the FM range)
7x active Chords that you can edit, modulate and store on each preset
Modulation wheel, Velocity and Aftertouch (monophonic) can target any and multiple parameters with different amount to each one at the same time

Specifications & Connections:

USB powered (1.5 Watts)
50 Playing hours with 20,000mA portable power bank
MIDI IN via USB or DIN5
1/4 MONO TS Jack Out
1/8 Headphones Out

Dimensions: 24 x 12.5 x 3.8 cm
Weight: 0.85 kg

Requirements

USB-A Adapter (5v) with 1000mA or more
MIDI device or keyboard that is equipped with either USB HOST or DIN5 midi output
Monitor, Amp or Headphones

Included in the box

USB cable (A to B)
DIN5 to 3.5mm adapter (specs as found at midi.org)
Quick Start Guide
Menu Map

IMPORTANT NOTE:
True power consumption is at 310mA. Some computers cannot deliver that much current. Please make sure that your device has sufficient current for Nymphes before connecting it- otherwise if you want to connect it with a computer, you will need a USB splitter or a powered USB hub.
When using a USB adapter, always make sure it can deliver 1000mA or more.

Notes: ***B-STOCK: Box opened, product in perfect working order***


Typhon has been developed with ultimate care and love, so as to be a great-sounding, portable and affordable synthesizer. It has a complex modulation routing, 256 preset memory, a 32 note sequencer, and powerful stereo effects developed by Sinevibes.

Since it is packed in a compact USB powered box, it can be carried everywhere you go!

Specifications & Connections:

USB powered (at least 500mA)
60 Playing hours with 20,000mA portable power bank
MIDI Din IN and OUT
1/4 in Stereo Out
1/8 in Headphone Out
1/8 in Mono Audio In (for routing via Typhon FX)

Dimensions: 23 x 13 x 6 cm
Weight: 1kg

Notes: Dtronics DT-1000, A hardware controller for the Roland Boutique D-05 and D-50/D-550

The Dtronics DT-1000 is a hardware controller for the Roland Boutique D-05 and D-50/D-550.

The DT-1000 can also be operated on a vintage Roland D-50 / D-550

Almost every parameter of the Roland D-05 gets its own slider, 10 keys and 56 pots in a nice and solid desktop case.

Some pots are doubly assigned, but can be switched quickly and are very easy to read.

For Roland Boutique D-05 Linear Synthesizer
Also compatible with Roland D-50 and D-550 vintage synthesizers
Direct access to all important parameters of the Roland Boutique D-05
10 Buttons and 56 pots
Robust housing
MIDI input and output
USB

Included in the box:
Dtronics DT-1000
DIN(5) MIDI cable
USB cable


Specifications
Material: high-quality plastic
Height: 44 mm
Width: 300 mm
Depth: 200 mm
Weight: 0.985 gram
DIN cord (DIN5P) is included
Power consumption USB or DIN: 60mA

Notes: Updated version of the DT-RDX controller features a built-in MIDI merger. The approach is the same, with hands-on control of all Yamaha Reface DX parameters, making it easier than ever to unleash the power of FM synthesis.

Supplier's Notes:
Dtronics DT-RDX-V2 for Yamaha Reface DX

The Dtronics DT-RDX-V2 is a hardware controller for the Yamaha Reface DX and the successor to its older brother the DT-RDX. The difference between the two is that the RDX-V2 has a hardware MIDI merger on board for even better performance.

With all its parameters the FM synthesis is a challenge control.

The DT-RDX has all parameters directly accessible with its 41 knobs and 9 switches.

All you have to do is select the desired operator. You can also edit multiple operators with the same parameters at the same time.

The controller is mounted on a stylish holder.(included)

Specifications

Holder: steel
Casing : high grade plastic
Power splitter cable to power-up the RDX and the Yamaha Reface DX is included
MIDI cable to connect the DT-RDX to the Yamaha Reface DX synthesizer is included.
The pictured Yamaha Reface DX synthesizer is not included

Notes: This plug converts power from the USA/Europe/Far East/Australia to 3 pin UK plug systems, making it an ideal option for travellers to the UK. Designed for use in the UK only.

Eagle UK Visitor Adaptor 10A

Suitable for travellers to the UK

Designed for UK usage

Notes: One to four configuration.

With these power split cables, it is easy to distribute the power from an AD-9 to more than one pedal.

The new design introduces flat contacts (similar to the popular EBS flat patch cables) to further reduce space on your pedalboard.

Notes: EBS now introduces 1-to-1 power distribution cables in a super compact and sleek design to use with Multi Power Supplies.

They are made on the same concept as the latest EBS DC-split cables with flat contacts, with the difference that the 1-to-1 cables offer the option to choose between straight-to-angled or angled-to-angled contacts.

The cables are available in four different lengths.

Notes: EBS now introduces 1-to-1 power distribution cables in a super compact and sleek design to use with Multi Power Supplies.

They are made on the same concept as the latest EBS DC-split cables with flat contacts, with the difference that the 1-to-1 cables offer the option to choose between straight-to-angled or angled-to-angled contacts.

The cables are available in four different lengths.

Notes: Do you use pedals that don't match the outputs of your power supply? With EBS' new power adapter cables, there's a way to solve most matters.

It sucks when you realize your coolest vintage pedal or latest digital processor-driven unit can't be fed from your pedalboard power supply because they are thirstier or uses different power inputs than your power supply features. At worst, you may even skip bringing your favourite toys to avoid the hassle. However, with the new EBS adaptor cables, you can solve many of these issues easily and save the space that those extra power supplies may occupy.

Need to convert a 2.1 mm plug to 2.5 mm? No problem.
Need more current than you get from one output? No problem.
Need 18 or 24V DC power from 9 and 12V outputs? No problem.
You can even change the polarity from the common Center Negative to Center Positive using one of the new EBS adaptor cables.

Here's how you do it:

To go from 2.1 to 2.5 mm, use the DC1-48 90/0 2.5 adaptor.
Want to change the polarity? Use the DC1-48 90/0 RP adaptor.
To increase the current, use the DC1-48 90/0 PAR and connect two outputs from your power supply. The total current will be the current from both outputs added together.*
To increase the voltage, use the DC1-48 90/0 SER and connect two outputs from your power supply. The total voltage will be the voltage from both outputs added together.*

* IMPORTANT! Requires a power supply with isolated, floating outputs.

Notes: Do you use pedals that don't match the outputs of your power supply? With EBS' new power adapter cables, there's a way to solve most matters.

It sucks when you realize your coolest vintage pedal or latest digital processor-driven unit can't be fed from your pedalboard power supply because they are thirstier or uses different power inputs than your power supply features. At worst, you may even skip bringing your favourite toys to avoid the hassle. However, with the new EBS adapter cables, you can solve many of these issues easily and save the space that those extra power supplies may occupy.

Need to convert a 2.1 mm plug to 2.5 mm? No problem.
Need more current than you get from one output? No problem.
Need 18 or 24V DC power from 9 and 12V outputs? No problem.
You can even change the polarity from the common Centre Negative to Centre Positive using one of the new EBS adapter cables.

Here's how you do it:
To go from 2.1 to 2.5 mm, use the DC1-48 90/0 2.5 adapter.
Want to change the polarity? Use the DC1-48 90/0 RP adapter.
To increase the current, use the DC1-48 90/0 PAR and connect two outputs from your power supply. The total current will be the current from both outputs added together.*
To increase the voltage, use the DC1-48 90/0 SER and connect two outputs from your power supply. The total voltage will be the voltage from both outputs added together.*

* IMPORTANT! Requires a power supply with isolated, floating outputs.

Notes: Do you use pedals that don't match the outputs of your power supply? With EBS new power adapter cables, there's a way to solve most matters.

It sucks when you realize your coolest vintage pedal or latest digital processor-driven unit can't be fed from your pedalboard power supply because they are thirstier or uses different power inputs than your power supply features. At worst, you may even skip bringing your favourite toys to avoid the hassle. However, with the new EBS adapter cables, you can solve many of these issues easily and save the space that those extra power supplies may occupy.

Need to convert a 2.1 mm plug to 2.5 mm? No problem.
Need more current than you get from one output? No problem.
Need 18 or 24V DC power from 9 and 12V outputs? No problem.
You can even change the polarity from the common Center Negative to Center Positive using one of the new EBS adaptor cables.

Here's how you do it:
To go from 2.1 to 2.5 mm, use the DC1-48 90/0 2.5 adaptor.
Want to change the polarity? Use the DC1-48 90/0 RP adaptor.
To increase the current, use the DC1-48 90/0 PAR and connect two outputs from your power supply. The total current will be the current from both outputs added together.*
To increase the voltage, use the DC1-48 90/0 SER and connect two outputs from your power supply. The total voltage will be the voltage from both outputs added together.*

* IMPORTANT! Requires a power supply with isolated, floating outputs.

Notes: Do you use pedals that don't match the outputs of your power supply? With EBS' new power adapter cables, there's a way to solve most matters.

It sucks when you realize your coolest vintage pedal or latest digital processor-driven unit can't be fed from your pedalboard power supply because they are thirstier or uses different power inputs than your power supply features. At worst, you may even skip bringing your favourite toys to avoid the hassle. However, with the new EBS adapter cables, you can solve many of these issues easily and save the space that those extra power supplies may occupy.

Need to convert a 2.1 mm plug to 2.5 mm? No problem.
Need more current than you get from one output? No problem.
Need 18 or 24V DC power from 9 and 12V outputs? No problem.
You can even change the polarity from the common Centre Negative to Centre Positive using one of the new EBS adapter cables.

Here's how you do it:
To go from 2.1 to 2.5 mm, use the DC1-48 90/0 2.5 adapter.
Want to change the polarity? Use the DC1-48 90/0 RP adapter.
To increase the current, use the DC1-48 90/0 PAR and connect two outputs from your power supply. The total current will be the current from both outputs added together.*
To increase the voltage, use the DC1-48 90/0 SER and connect two outputs from your power supply. The total voltage will be the voltage from both outputs added together.*

* IMPORTANT! Requires a power supply with isolated, floating outputs.

Notes: With these power split cables, it is easy to distribute the power from an AD-9 to more than one pedal.

The new design introduces flat contacts (similar to the popular EBS flat patch cables) to further reduce space on your pedalboard.

Notes: The Cntl Knob is an affordable, compact, easy-to-use pedal that delivers static remote control for devices with expression control jacks. It lets you set two preset values that represent two positions of a traditional expression pedal and toggle between them with its footswitch.

The pedal's EXP 1 Knob selects the first expression setting and the EXP 2 Knob the second. On both, fully CCW corresponds to the heel position while fully CW to the toe position. LEDs indicate which knob is active and can be powered by your pedalboard's power supply or an optional EHX's 9.6DC200mA PSU.

To maximize the Cntl Knob's compatibility with other products it's equipped with a TRS+/- Button that lets you match its expression polarity with the device being controlled. For extra convenience it comes equipped with a 6 foot TRS (Tip-Ring-Sleeve) cable.

Electro-Harmonix introduces the compact Cntl Knob which lets a player set two preset values that represent two positions of a traditional expression pedal and toggle between them with its footswitch.

The Cntl Knob's EXP 1 Knob selects the first expression setting and the EXP 2 Knob the second. On both, fully CCW corresponds to the heel position while fully CW to the toe position. A TRS+/- Button matches the expression polarity of the Cntl Knob to the product being controlled and ensures maximum compatibility with pedals by all makers. LEDs indicate which knob is active and can be powered by a player's pedalboard power supply or an optional EHX's 9.6DC200mA PSU.

The Cntl Knob (Control Knob) comes equipped with a 6 foot TRS (Tip-Ring-Sleeve) cable.

Notes: EHX SPORT BUDS are ideal for your active lifestyle. These lightweight comfortable earbuds let you take your music with you when you're on the go. Great sounding, extended battery life, sweatproof design and three sizes of ear cushions, too.

- Up to 12 hours of earbud playtime
- 3 sizes of ear cushions for a perfect fit
- Comfort of a lightweight, sweat-proof design
- Voice assistant compatibility and music/call control

Includes:

- Earbuds
- Ear cushions (S, M & L)
- USB charging cable

Notes: The MOP-D10 is a multi-output power source that was developed by EHX engineers to provide a player with noise-free pedal operation. It features ten isolated 9VDC outputs that handle the most popular power requirements: 4x100mA, 2x250mA, 2x300mA and 2x400mA.

From its premium analogue power path featuring low-noise linear regulators to its custom-wound toroidal transformer, the MOP-D10 is designed to let a pedal user achieve a sonically pure signal path. Unlike many other multi-output power supplies which rely on switching power conversion, the MOP-D10's transformer-based power conversion is significantly less susceptible to spurious noises leaking into the audio path. An AC Voltage Selector Switch also ensures the MOP-D10 can be used with a range of voltages commonly found around the world.

Each of the MOP-D10's outputs is center-negative and all output power jacks are isolated from each other. The dimensions of each output connector are 5.5mm x 2.1mm. The unit is supplied with a 6' detachable power cord and ten 24" long DC power cables equipped with one straight and one right-angle end. It also includes hardware for pedalboard mounting.

Professional pedalboard power solution with ten isolated 9VDC outputs: 4x100mA, 2x250mA, 2x300mA and 2x400mA
Provides a premium analogue power path with low-noise linear regulators
Custom-wound toroidal transformer delivers exceptional isolation and clean power
Relies on transformer-based power conversion which is superior to switching power conversion
AC Voltage Selector Switch allows the MOP-D10 to be used with a range of voltages commonly found around the world
All output power jacks are isolated from each other for noise-free operation
Comes with ten 24" long DC power cables equipped with one straight and one right-angle end
Includes hardware for pedalboard mounting

Specifications

Dimensions (in): 7.87
Year Released: 2021

Notes: Power up to eight effects pedals on your pedalboard!

If you're tired of noise in your signal chain and if you want to be sure your carefully selected pedals are getting consistent current for their best performance, the EHX S8 Multi-Output Power Supply is your go-to solution. It powers up to eight individual effects pedals with seven 9VDC outputs and one 18VDC output.

Provides one 18V and seven 9V outputs
Each output is individually regulated for maximum performance
Short circuit protection design for the individual outputs
Pedalboard-friendly size, rugged metal chassis
Includes eight power cables

Power Supply: 12V DC power adapter
Outputs: Seven 9V power supply output and one 18V power supply output
Current Source: 9V DC outputs maximum current of 250mA per output
Current Source: 18V DC output maximum current of 150 mA


Specifications

Power Supply
12VDC power adapter included
Dimensions (in)
3.75 x 1.5 x 1.25
Year Released
2019

Notes: Standard Eurorack power cable.

Use the 10-16 variant for most modules. 16-16 is for modules that use the internal +5V rail.

Length: 25CM (9.8")

Notes: Desktop module incarnation of Electrosmith's customisable DSP platform, designed with plenty of audio, MIDI and CV connectivity to allow you to create your own synths, drum machines and sequencers.

Supplier's Notes:
Create a mono-synth, drum machine, or MIDI sequencer with the Field! It works as a great development tool, or handy small-form synth to take with you on the go. Comes with Daisy installed and 9V power adapter.

Notes: The Daisy Patch Submodule is a DSP platform for Eurorack synthesizer modules. It features a lightning fast STM32 processor, high fidelity stereo audio codec, and enough RAM for 10 minute long buffers - all with standard signal levels and conditioning for the Eurorack ecosystem.

Simply design your carrier board, and let the Patch Submodule do the rest!

Programming is a breeze with support for C++, Max/MSP Gen~, Pure Data, Arduino, and more. These languages can be coupled with our open source DSP library, DaisySP, for a powerful music synthesis programming environment.

Create your dream Eurorack module with the Daisy Patch SM!

STM32 processor at 480MHz, 96kHz / 24-bit audio, RAM for up to 10 minute audio buffers

Stereo audio IO, x12 ADC inputs ( 16-bit bipolar CV or potentiometer), x2 CV outputs (12-bit), x2 gate inputs, x2 gate outputs, x12 GPIO

Flash firmware over USB via open source web programmer

Support for SDDMC, SPI, UART, I2C, and USB

FCC / CE Tested and Compliant