New releases today: All genres

Notes: The third generation of the world's most popular wireless microphone, now with 32-bit float recording, intelligent GainAssist technology, improved built-in mics and a host of professional features and enhancements - the ultimate creative companion.

The World's Most Popular Wireless Microphone

The original Wireless GO was the first of its kind, establishing an entirely new category of compact wireless microphone that soon became the go-to audio tool for content creators around the world. Now, the third-generation Wireless GO builds on this legacy, delivering every feature and convenience a creator could possibly need while maintaining the intuitive grab-and-go operation that the range is known for.

State-of-the-art Wireless Audio

Utilising RODE's state-of-the-art Series IV 2.4GHz digital transmission and proprietary near-zero latency codec with 128-bit encryption, the Wireless GO delivers crystal-clear, incredibly stable audio with a range of up to 260m.

Say Goodbye to Clipping

For the ultimate peace of mind, each of the Wireless GO's transmitters feature over 40 hours of 32-bit float on-board recording. This means that your audio is safely backed up every time you record, with the ability to recover any recording in post-production that was too quiet or too loud - even audio that clipped!

Flawless Sound with Every Take

The Wireless GO offers a wide range of features to help you capture incredibly clean and intelligible audio for your content. Intelligent GainAssist technology automatically balances levels on-the-fly, granular gain adjustment and tailored camera presets allow for more refined control over your signal, and the built-in microphones feature the same upgraded capsules and preamps as found in the Wireless PRO. Capture flawless sound with every take.

The Wireless Mic for Every Setup and Every Setting

With both digital and analogue outputs, the Wireless GO is just at home connected to a DSLR or mirrorless camera as it is plugged into an iPhone or Android smartphone - you can even use it as a USB microphone with your computer.

Gain the Professional Edge

Monitor your audio in the field with the Wireless GO's high-power headphone output, ensure your lavaliers stay connected on set with 3.5mm locking connectors, and extend your system's battery in the field with plug-in power detect. The Wireless GO has a host of professional features designed to make your creative life a whole lot simpler.
Specifications

Acoustic & Electrical

Acoustic Principle: Pre-polarised pressure transducer
Polar Pattern: Omnidirectional
Frequency Range: 20 Hz - 20 kHz
Maximum SPL: 123.5 dBSPL
Equivalent Noise (A-Weighted): 22 dBA
Signal-to-noise Ratio: 72 dB
Analogue Inputs: 3.5mm locking TRS (TX)
Analogue Outputs: 3.5mm TRRS (RX)
Transmission Range: 260m (line of sight)
Digital Connectivity: USB-C
Operating System Requirements: macOS 11 and above, Windows 10 and above, iOS 14 and above, Android 11 and above
Power Requirements: In-built rechargeable lithium-ion battery, charged via USB-C (5V, 0.4A)
Operating Time: Up to 7 hours

Mechanical

Weight (grams)
TX: 35
RX: 36

Dimensions (millimetres)
TX: 46.5 (W) x 44 (L) x 20 (H)
RX: 46.5 (W) x 44 (L) x 20 (H)

What's in the box

2 x Transmitter
1 x Receiver
1 x SC2
1 x SC21
1 x SC22
1 x SC33
1 x Carry Pouch
3 x Furry

Notes: The third generation of the world's most popular wireless microphone, now with 32-bit float recording, intelligent GainAssist technology, improved built-in mics and a host of professional features and enhancements - the ultimate creative companion.

The World's Most Popular Wireless Microphone

The original Wireless GO was the first of its kind, establishing an entirely new category of compact wireless microphone that soon became the go-to audio tool for content creators around the world. Now, the third-generation Wireless GO builds on this legacy, delivering every feature and convenience a creator could possibly need while maintaining the intuitive grab-and-go operation that the range is known for.

State-of-the-art Wireless Audio

Utilising RODE's state-of-the-art Series IV 2.4GHz digital transmission and proprietary near-zero latency codec with 128-bit encryption, the Wireless GO delivers crystal-clear, incredibly stable audio with a range of up to 260m.

Say Goodbye to Clipping

For the ultimate peace of mind, each of the Wireless GO's transmitters feature over 40 hours of 32-bit float on-board recording. This means that your audio is safely backed up every time you record, with the ability to recover any recording in post-production that was too quiet or too loud - even audio that clipped!

Flawless Sound with Every Take

The Wireless GO offers a wide range of features to help you capture incredibly clean and intelligible audio for your content. Intelligent GainAssist technology automatically balances levels on-the-fly, granular gain adjustment and tailored camera presets allow for more refined control over your signal, and the built-in microphones feature the same upgraded capsules and preamps as found in the Wireless PRO. Capture flawless sound with every take.

The Wireless Mic for Every Setup and Every Setting

With both digital and analogue outputs, the Wireless GO is just at home connected to a DSLR or mirrorless camera as it is plugged into an iPhone or Android smartphone - you can even use it as a USB microphone with your computer.

Gain the Professional Edge

Monitor your audio in the field with the Wireless GO's high-power headphone output, ensure your lavaliers stay connected on set with 3.5mm locking connectors, and extend your system's battery in the field with plug-in power detect. The Wireless GO has a host of professional features designed to make your creative life a whole lot simpler.
Specifications

Acoustic & Electrical

Acoustic Principle: Pre-polarised pressure transducer
Polar Pattern: Omnidirectional
Frequency Range: 20 Hz - 20 kHz
Maximum SPL: 123.5 dBSPL
Equivalent Noise (A-Weighted): 22 dBA
Signal-to-noise Ratio: 72 dB
Analogue Inputs: 3.5mm locking TRS (TX)
Analogue Outputs: 3.5mm TRRS (RX)
Transmission Range: 260m (line of sight)
Digital Connectivity: USB-C
Operating System Requirements: macOS 11 and above, Windows 10 and above, iOS 14 and above, Android 11 and above
Power Requirements: In-built rechargeable lithium-ion battery, charged via USB-C (5V, 0.4A)
Operating Time: Up to 7 hours

Mechanical

Weight (grams)
TX: 35
RX: 36

Dimensions (millimetres)
TX: 46.5 (W) x 44 (L) x 20 (H)
RX: 46.5 (W) x 44 (L) x 20 (H)

What's in the box

2 x Transmitter
1 x Receiver
1 x SC2
1 x SC21
1 x SC22
1 x SC33
1 x Carry Pouch
3 x Furry

Notes: The third generation of the world's most popular wireless microphone, now with 32-bit float recording, intelligent GainAssist technology, improved built-in mics and a host of professional features and enhancements - the ultimate creative companion.

The World's Most Popular Wireless Microphone

The original Wireless GO was the first of its kind, establishing an entirely new category of compact wireless microphone that soon became the go-to audio tool for content creators around the world. Now, the third-generation Wireless GO builds on this legacy, delivering every feature and convenience a creator could possibly need while maintaining the intuitive grab-and-go operation that the range is known for.

State-of-the-art Wireless Audio

Utilising RODE's state-of-the-art Series IV 2.4GHz digital transmission and proprietary near-zero latency codec with 128-bit encryption, the Wireless GO delivers crystal-clear, incredibly stable audio with a range of up to 260m.

Say Goodbye to Clipping

For the ultimate peace of mind, each of the Wireless GO's transmitters feature over 40 hours of 32-bit float on-board recording. This means that your audio is safely backed up every time you record, with the ability to recover any recording in post-production that was too quiet or too loud - even audio that clipped!

Flawless Sound with Every Take

The Wireless GO offers a wide range of features to help you capture incredibly clean and intelligible audio for your content. Intelligent GainAssist technology automatically balances levels on-the-fly, granular gain adjustment and tailored camera presets allow for more refined control over your signal, and the built-in microphones feature the same upgraded capsules and preamps as found in the Wireless PRO. Capture flawless sound with every take.

The Wireless Mic for Every Setup and Every Setting

With both digital and analogue outputs, the Wireless GO is just at home connected to a DSLR or mirrorless camera as it is plugged into an iPhone or Android smartphone - you can even use it as a USB microphone with your computer.

Gain the Professional Edge

Monitor your audio in the field with the Wireless GO's high-power headphone output, ensure your lavaliers stay connected on set with 3.5mm locking connectors, and extend your system's battery in the field with plug-in power detect. The Wireless GO has a host of professional features designed to make your creative life a whole lot simpler.
Specifications

Acoustic & Electrical

Acoustic Principle: Pre-polarised pressure transducer
Polar Pattern: Omnidirectional
Frequency Range: 20 Hz - 20 kHz
Maximum SPL: 123.5 dBSPL
Equivalent Noise (A-Weighted): 22 dBA
Signal-to-noise Ratio: 72 dB
Analogue Inputs: 3.5mm locking TRS (TX)
Analogue Outputs: 3.5mm TRRS (RX)
Transmission Range: 260m (line of sight)
Digital Connectivity: USB-C
Operating System Requirements: macOS 11 and above, Windows 10 and above, iOS 14 and above, Android 11 and above
Power Requirements: In-built rechargeable lithium-ion battery, charged via USB-C (5V, 0.4A)
Operating Time: Up to 7 hours

Mechanical

Weight (grams)
TX: 35
RX: 36

Dimensions (millimetres)
TX: 46.5 (W) x 44 (L) x 20 (H)
RX: 46.5 (W) x 44 (L) x 20 (H)

What's in the box

2 x Transmitter
1 x Receiver
1 x SC2
1 x SC21
1 x SC22
1 x SC33
1 x Carry Pouch
3 x Furry

Notes: The third generation of the world's most popular wireless microphone, now with 32-bit float recording, intelligent GainAssist technology, improved built-in mics and a host of professional features and enhancements - the ultimate creative companion.

The World's Most Popular Wireless Microphone

The original Wireless GO was the first of its kind, establishing an entirely new category of compact wireless microphone that soon became the go-to audio tool for content creators around the world. Now, the third-generation Wireless GO builds on this legacy, delivering every feature and convenience a creator could possibly need while maintaining the intuitive grab-and-go operation that the range is known for.

State-of-the-art Wireless Audio

Utilising RODE's state-of-the-art Series IV 2.4GHz digital transmission and proprietary near-zero latency codec with 128-bit encryption, the Wireless GO delivers crystal-clear, incredibly stable audio with a range of up to 260m.

Say Goodbye to Clipping

For the ultimate peace of mind, each of the Wireless GO's transmitters feature over 40 hours of 32-bit float on-board recording. This means that your audio is safely backed up every time you record, with the ability to recover any recording in post-production that was too quiet or too loud - even audio that clipped!

Flawless Sound with Every Take

The Wireless GO offers a wide range of features to help you capture incredibly clean and intelligible audio for your content. Intelligent GainAssist technology automatically balances levels on-the-fly, granular gain adjustment and tailored camera presets allow for more refined control over your signal, and the built-in microphones feature the same upgraded capsules and preamps as found in the Wireless PRO. Capture flawless sound with every take.

The Wireless Mic for Every Setup and Every Setting

With both digital and analogue outputs, the Wireless GO is just at home connected to a DSLR or mirrorless camera as it is plugged into an iPhone or Android smartphone - you can even use it as a USB microphone with your computer.

Gain the Professional Edge

Monitor your audio in the field with the Wireless GO's high-power headphone output, ensure your lavaliers stay connected on set with 3.5mm locking connectors, and extend your system's battery in the field with plug-in power detect. The Wireless GO has a host of professional features designed to make your creative life a whole lot simpler.
Specifications

Acoustic & Electrical

Acoustic Principle: Pre-polarised pressure transducer
Polar Pattern: Omnidirectional
Frequency Range: 20 Hz - 20 kHz
Maximum SPL: 123.5 dBSPL
Equivalent Noise (A-Weighted): 22 dBA
Signal-to-noise Ratio: 72 dB
Analogue Inputs: 3.5mm locking TRS (TX)
Analogue Outputs: 3.5mm TRRS (RX)
Transmission Range: 260m (line of sight)
Digital Connectivity: USB-C
Operating System Requirements: macOS 11 and above, Windows 10 and above, iOS 14 and above, Android 11 and above
Power Requirements: In-built rechargeable lithium-ion battery, charged via USB-C (5V, 0.4A)
Operating Time: Up to 7 hours

Mechanical

Weight (grams)
TX: 35
RX: 36

Dimensions (millimetres)
TX: 46.5 (W) x 44 (L) x 20 (H)
RX: 46.5 (W) x 44 (L) x 20 (H)

What's in the box

2 x Transmitter
1 x Receiver
1 x SC2
1 x SC21
1 x SC22
1 x SC33
1 x Carry Pouch
3 x Furry

Notes: The Wireless GO (Gen 3) marks a new generation in RODE's Wireless Go family and offers a plethora of features for capturing pristine audio in any situation, including intelligent GainAssist technology and 32-bit float on-board recording with 32 GB of internal memory. RODE's state-of-the-art Series IV 2.4GHz digital transmission delivers best-inclass range, with broadcast-grade in-built microphones for crystal-clear audio capture.

It is universally compatible with cameras, phones and computers, and for even more flexibility features locking lavalier connectors, dedicated buttons for triggering recording, auto-power on/off, and a TRRS jack on the receiver for headphone monitoring or audio input.