Effects pedals

Notes: The Zoom G1 FOUR features over 60 effects and amp models, looper and drum machine. Plus, access ZOOM Guitar Lab's additional library of downloadable effects. Plug in and be amazed!

Sounds That Inspire:
The pedal has more than 60 traditional and boutique effects, including ring modulator, pitch-shifting delay and even sitar simulation.

Your Favourite Amps & Cabinets:
With 13 classic amps and cabinets like Fender, Marshall, Orange and more, the G1 series brings big stage sound wherever you go.

You'll Love The Free Guitar Lab Software:
With ZOOM Guitar Lab, explore an endless world of artist patches, effects and more. And with its ability to manage and backup all of your patches, you can experiment and create endless combinations.

Drums Included:
Play along with 68 great-sounding rhythm patterns in different time signatures, including 4/4, 3/4 and more.

Stay Looped In:
The built-in looper can record up to 30 seconds of playing, allowing you to create dynamic, multi-part arrangements.

Auto Patch Backup:
Your patches and level settings are instantly backed up when using the Auto Save function, ensuring you never lose your latest creation.

Perform Live:
Seamlessly switch up your sounds during live shows using either of 2 performance modes.

PRESELECT mode lets you jump from patch to patch without affecting the patch your currently playing.

STOMP mode lets you turn individual effects on and off with the tap of your foot.

Off the Floor:
The G1 FOUR control panel is also designed for hands-on, desktop use. Dial in tones and adjust level settings with absolute precision to craft your perfect sound.

Power Options:
The G1 FOUR runs on just four AA batteries. Alternatively, it can be powered using the optional Zoom AD-16 AC adapter or via USB bus power.

Notes: The Cosmic ECHO is an analogue-sounding LoFi delay that will work with just about anything you plug into it.

The dark, lush, moody tones of the ever-popular PT2399 IC provide an out-of-this-world experience. Our take on this classic pedal pushes the chip's limits so you can explore all the gritty elements drifting at the edge of long delay rates. It already outperforms other bucket brigade style echoes, but just to be sure, we added 2 momentary switches, Zone and Warp.

Dark, rich sounds with the analogue vibe of a tape echo.

Uses the PT2399 IC, a bucket brigade style emulation. This IC has 16-bit sampling for 30-300 milliseconds. After that, the sample rate goes down in relation to the delay length. This results in artifacts and noise being introduced into the audio for weird, cosmic, psychedelic sounds.

Delay length: 30ms-1,250ms

3 knobs: Feedback, Mix and Rate. The Mix is a wet-only control that attenuates the amount of delayed signal in the signal chain. The Rate controls the number of repeats in an organic-sounding way.

Warp button: Momentary pushbutton switch that gives a bright, "small speaker" tone.

Zone button: Momentary pushbutton switch that introduces feedback into the circuit momentarily. Great for adding rhythmic feedback and other strange sounds. The Zone amount can be adjusted by an internal trim pot.

Pedal may have a slight volume drop.

Great for shoegaze, surf rock, ambient and experimental sounds.

Pedal uses a 125B case

Dimensions (L x W x H): 4 7/8" x 2 5/8" x 2 3/16" (124mm x 67mm x 56mm).

Takes a 9V battery or 9V centre negative 2.1mm barrel power supply (not included).

Notes: ***B-STOCK: Box opened, product in perfect working order***


Voodoo Vibe is a mini guitar effect pedal that is recreates the rotating speaker effects produced by the classic uni vibe pedals used by famous guitarists from the 60's to the present day. Controls for Speed, Intensity and Volume give a wide range of adjustment to home in on the perfect vibe effect. An illuminated mini push button above the rotary controls can switch between a classic psychedelic vibe effect or a more chorus-type effect. Holding this button down during power-up selects between mono output or stereo output, which requires a stereo jack lead. Pressing the footswitch engages or disengages the effect. The smart tap tempo feature means that the pedal recognises pressing the footswitch twice or in a short space of time and responds to the timing as a tap tempo function. Perfect for trippy arpeggios and ethereal chord work.

Power supply: 9Vdc (DC5521 connector, negative centre, adaptor not supplied)
Controls: Speed, Intensity, Volume and Vibe/Chorus switch
Dimensions: 94 x 53 x 51mm
Weight: 175g

In the box

The box for this item contains :

Voodoo Vibe pedal

Notes: Voodoo Vibe is a mini guitar effect pedal that is recreates the rotating speaker effects produced by the classic uni vibe pedals used by famous guitarists from the 60's to the present day. Controls for Speed, Intensity and Volume give a wide range of adjustment to home in on the perfect vibe effect. An illuminated mini push button above the rotary controls can switch between a classic psychedelic vibe effect or a more chorus-type effect. Holding this button down during power-up selects between mono output or stereo output, which requires a stereo jack lead. Pressing the footswitch engages or disengages the effect. The smart tap tempo feature means that the pedal recognises pressing the footswitch twice or in a short space of time and responds to the timing as a tap tempo function. Perfect for trippy arpeggios and ethereal chord work.

Power supply: 9Vdc (DC5521 connector, negative centre, adaptor not supplied)
Controls: Speed, Intensity, Volume and Vibe/Chorus switch
Dimensions: 94 x 53 x 51mm
Weight: 175g

In the box

The box for this item contains :

Voodoo Vibe pedal

Notes: Pulse is a miniature IR (impulse response) loader pedal, that can apply a specific tonal profile to the input signal. Speaker cabinets typically change the tone of a guitar or bass guitar in a musical way, which is often collected using a microphone for sending to a mixing console for recording or sound reinforcement. Connecting the signal to a mixer before the speaker usually produces a sterile and harsh sound, which is where the Pulse pedal comes in. This pedal can mimic the speaker cabinet and microphone, meaning that the guitar signal can be taken straight from the preamp section and injected into a channel on the mixer. Another use for IR loaders is to mimic the response of an acoustic guitar, making an electric guitar sound more like an acoustic or an electro-acoustic guitar sound more natural. Pulse has modes for guitar cab, bass cab or acoustic guitar with 8 selectable types of each, adjusted by Level and Space controls. A 3.5mm headphone output means that this pedal can also be used for silent practice and an inbuilt audio to USB interface means that it can be used as the front end for a PC or Mac computer recording setup. Pulse is an invaluable guitarists and bass players multi-tool for practice, live and recording duties.

Power supply: 9Vdc (DC5521 connector, negative centre, adaptor not supplied)
Controls: Level, Space, 8-model selector and 3 IR modes switch
Dimensions: 94 x 53 x 51mm
Weight: 175g

In the box

The box for this item contains :

Pulse IR loader pedal

Notes: A mini chorus effect pedal with 3 switchable modes for Chorus, Flanger and Pitch Modulation. Chorus thickens the sound by modulating a short delay effect, producing a swirling ethereal tone. The Flanger effect tightens this by shortening to a very fine delay and regenerating it for rotating and tubular jet sounds. Pitch Modulation provides a lighter chorus effect by slightly varying the pitch and mixing back with the dry signal. All 3 are selected by an illuminated push button above the controls. Holding this button down during power-up selects between mono output or stereo output, which requires a stereo jack lead. Controls include Speed, Width and Intensity to adjust each effect as required, Pressing the footswitch engages or disengages the effect. The smart tap tempo feature means that the pedal recognises pressing the footswitch twice or in a short space of time and responds to the timing as a tap tempo function to adjust the speed setting. An extremely versatile modulation effect to give space and motion to chords and picked passages alike.

Power supply: 9Vdc (DC5521 connector, negative centre, adaptor not supplied)
Controls: Speed, Width, Intensity and Chorus/Flanger/Pitch Mod switch
Dimensions: 94 x 53 x 51mm
Weight: 175g

In the box

The box for this item contains :

Mini Super Chorus/Flanger/Pitch pedal

Notes: Evolving from the popular Metal Core Deluxe pedal, the mkII version now has 3 selectable amplifier models based on much-revered high gain valve amplifiers. Now with an additional Middle control, the 3-band EQ pairs with Gain and Master to offer a full completement of real amplifier controls, with settings stored into each of the 3 amp models for fast recall. Metal Core Deluxe mkII goes a step further to include IR cabinet simulation, meaning that it can be used directly into a full-range PA system, or without IR simulation into the front of a guitar amplifier as a hard-edged drive pedal. Whichever wiring method is used, Metal Core Deluxe mkII delivers the full breadth of metal tones for hard rock to thrash.

3 distinct high gain amplifier models
3-band EQ
Switchable IR cabinet simulation
Settings auto-stored for each model
True bypass
USB-C for firmware updates & future software

Power supply: 9Vdc (PP3) battery or optional power adaptor
DC input connection: DC5521 jack (for optional adaptor - pin-negative)
Current consumption: <120mA
Controls: Gain, Master, Bass, Middle, Treble, Model switch
Modes: Duo Rect, Fireman, VH4
Input: 6.3mm jack
Output: 6.3mm jack
Input impedance: 1M ohm
Output impedance: 1k ohm
Dynamic range: 104dB
Dimensions: 122 x 72 x 47mm
Weight: 270g

In the box

The box for this item contains :

Metal Core Deluxe mkII pedal
Alkaline PP3 battery

Notes: Damp is the name given to this miniature digital reverb pedal to describe the immersive sound image provided by its 3 inbuilt reverb models. A choice of Spring, Plate or Hall reverberation types can be selected by the illuminated push button at the top of the pedal. Holding this button down during power-up selects between mono output or stereo output, which requires a stereo jack lead. Three rotary controls adjust Decay, Level and Tone settings as required. Pressing the footswitch activates or deactivates the effect, whilst holding this pedal enables a secondary effect - Shimmer in Plate mode or Freeze in Spring or Hall modes. The Damp pedal is versatile enough to cover a wide range of reverb styles with a minimal footprint on guitarists' pedalboards or for patching into an effects loop for other instruments or even vocals.

Power supply: 9Vdc (DC5521 connector, negative centre, adaptor not supplied)
Controls: Decay, Level, Tone and 3 reverb modes switch
Dimensions: 94 x 53 x 51mm
Weight: 175g

In the box

The box for this item contains :

Damp digital reverb pedal

Notes: For over 30 years, the Nobels ODR-1 overdrive pedal has become a renowned classic and has developed cult-like status among guitarists worldwide. Seen as an indispensable staple in many professional setups, the pedal has become an industry standard that is widely imitated, but seldom surpassed.

The new Nobels ODR-mini2 is the next stage in the evolution of the legendary ODR-1's little brother, the ODR-mini. Due to popular demand, this diminutive powerhouse now features a very useful bass cut feature as an external control. Added to this, the upgraded full metal housing, along with the integrated Mounty-P Mounting Plates, completes the worthwhile upgrades for this compact dynamo.

For extended ease of use, the internal Bass Cut feature originally included in the ODR-1BC is now available as an external variable control right on the face of the pedal. This allows for complete optimisation of the pedal's bass response on the fly, at the simple turn of a knob. The flexibility of this new additional control compliments Nobels' unique and renowned SPECTRUM tone control, which alters the proportion of both the low-mid and high frequencies simultaneously. At midday, the frequencies remain almost untouched. However, moving from the minimum to maximum positions will deliver variations in frequency response that are suitable for a wealth of musical tastes and styles.

With its newly designed and upgraded full metal enclosure, the ODR-mini2 is capable of operating at either standard 9V or 18V for increased dynamic headroom. Along with all other Nobels pedals, the ODR-mini2 now also features 4 integrated Mounty-P Mounting Plates for safe and secure attachment to pedalboards.Upgrade your overdrive experience and become a part of the new ODR generation!

Notes: The ODR-mini delivers creamy, natural overdrive - Everything from pushed clean amp tones to gain filled stacks! It has the same tones as its legendary brother - the ODR-1. You'll love the warm mid-gain tones for rock and blues, and the screaming hard rock sounds from the ODR-1 Mini. Plus the mini features true-bypass switching, the SPECTRUM pot with mid-click, fluorescent pointers on the "GitD" - knobs (Glow-in-the-Dark). Guaranteed to be a BIG part of your sound while a small part of your pedal board.

Electr. stab. power supply 9-18 Volt DC, with min. 100 mA, 2.1 mm plug, center negative, (optional)

Effect-Type: Overdrive
Analogue
Mono/Stereo: Mono In, Mono Out
Control: Drive, Tone, Level
Bypass Modus: True Bypass
9-18 Volt, center negative
Consumption 25 mA
Dimensions (BxLxH / mm): 42 x 93 x 50
Weight: 175 gr
Country of origin: China
Solid metal housing
Low current consumption
inkl. tape

Notes: DEL-mini

Compact Stereo Delay Pedal

The diminutive, yet feature packed, Nobels DEL-mini delay pedal combines an outstanding selection of delay tones in a budget-friendly and space-saving enclosure.

While Nobels has a heritage of past delay units, this newly engineered pedal offers maximum versatility in a super compact package.

Providing an expertly curated selection of timeless delay effects with either a mono or spacious stereo image, DEL-mini delivers a wealth of sonic possibilities, far beyond its modest size and is an excellent addition to any size of setup.

Featuring three carefully crafted delay flavours, Tape (up to 553 ms), Analog (up to 402 ms) and Digital (up to 1000 ms), all three modes all faithfully capture the iconic delay tones that have shaped music across genres, past and present. Each mode is simply selected by the pedal's convenient mode switch right on the face of the pedal.

Adding to its flexibility, the DEL-mini features full tap tempo functionality, but in a single switch design. Simply holding the footswitch for approximately two seconds enters the pedal into "Tap Tempo Mode", following which the pedal will respond to rhythmic tapping instantly. Further defying expectations based on its compact appearance, there are dedicated toggles for selection between mono and stereo (TRS) operation as well as true or buffered bypass modes, making the pedal suitable for almost any musical situation, anywhere, any time.

As with all other current Nobels pedals, the DEL-mini features 4 integrated Mounty-P Mounting Plates for safe and secure attachment to pedalboards. With its full metal enclosure and Glow in the Dark pointer knobs, the DEL-mini is a pint-sized powerhouse that's built for performance!

Product Height (cm): 5.100
Product Width (cm): 4.850
Product Depth (cm): 9.370
Product Weight (kg): 0.210

Box Height (cm): 6.540
Box Width (cm): 7.000
Box Depth (cm): 12.100
Boxed Weight (kg): 0.301

Notes: MOOER, a leading music gear company, is proud to announce the release of Micro Looper II, a powerful and compact loop pedal that provides an impressive 480 minutes of recording time spread across three saving banks.

Featuring three saving banks and 16 slots per bank, the Multi-Saving-Slot Micro Looper Pedal offers users up to 480 minutes of recording time, with each slot providing up to 10 minutes. The pedal also includes unlimited recording layers, allowing musicians to easily create complex and layered loops.

With its AUTO REC function, the Micro Looper II automatically starts recording as soon as an input signal is detected, making it easy to capture spontaneous musical ideas without having to press any buttons.

Specifications:

Number of saving slots: 48
Maximum recording capacity of each slot:10 minutes
Sample rate/sample depth: 44.1kHz/24bit
Input: 1/4'' mono audio jack (impedance value: 470k ohm)
Output: 1/4'' mono audio jack (impedance value: 100 ohm)
Power requirements: 9V 120mA, centre negative (it is recommended to use the isolated power supply to avoid unexpected noise)
Dimensions: 93.5(D) × 42 (W) × 52mm (H)
Weight: 157g
Accessories: Owner's manual

Notes: E7 is the MOOER Polyphonic Guitar Synth Pedal is the second pedal of MOOER New Micro series. As a brand-new design Micro series, we have added 7 LED indicators on the right side of the shell, providing more possibility to the New Micro series.
E7 can transform your guitar into a typical electronic synthesizer, without the need for special pickups or instrument modifications. It is named as E7, for its seven different MOOER custom synthesizer tones. Each tone with an individual arpeggiator, high/low frequency cut, attack, speed function, allow users to shape the tone in their mind easily, explore the horizon of tone with the E7.

Features:
*7 different types of brand-new MOOER SYNTH tones
*Individual Arpeggiator for each tone
*7 slots for storing users' presets
*Firmware upgradeable via USB

Specifications:
*Input: 1/4" mono jack (impedance 2.2M Ohms)
*Output: 1/4" mono jack (impedance 100Ohms)
*Power supply: 9V DC transformer (internal negative external), MOOER Micro Power is recommended
*Current Draw: 150mA
*Dimensions: 93.5mm(D) x 42mm(W) x 52mm(H)
*Weight: 155g
*Accessories: User Manual

Notes: MOOER's reverb effects have been substantially upgraded in the first reverb pedal from The New Micro Series. This sparkling gem features seven different reverb effects catering to the far-out guitar astronauts and the psychedelic space cadets. Go to infinity and beyond with the Infinite Trail fade out or keep things brief with the traditional Trail On feature. The shimmering blue finish also adds a bit of sparkly flare to any pedal setup.

Features:
*7 different reverb effects from classic to psychedelic.
*INFINITE trail function.
*Trail On function allows effects to fade out naturally.
*Supports buffer bypass or true bypass.
*Storable preset for each effect.
*Firmware updatable via USB.

Specifications:
*Input: 1/4" mono jack (impedance 2.2M Ohms)
*Output: 1/4" mono jack (impedance 100Ohms)
*Power supply: 9V DC transformer (internal negative external), MOOER Micro
*Power is recommended
*Current Draw: 200mA
*Dimensions: 93.5mm(D) x 42mm(W) x 52mm(H)
*Weight: 155g
*Accessories: User Manual

Notes: Endorphin.es present the rather simple but ever so useful PLUS 3 - desktop expression and sustain pedal that adds controls and unlocks features in MIDI controllers, synthesizers, effects pedals and semimodular/eurorack instruments, some in ways previously not possible

PLUS 3 is designed for musicians who prefer compact desktop control of features accessible via the sustain and expression jacks of their instruments, as opposed to using their feet or bulky sustain and expression pedals on their desk.

PLUS 3 includes a high-quality fader for expressive performance and automation, a momentary sustain key, and an innovative "drone mode" toggle switch, which lets you free your hands and hold notes indefinitely. In drone mode, the momentary key's functionality changes, to let you swap droned notes with new ones.

PLUS 3 is totally passive, meaning it doesn't require any power to work. It's made of aluminium, so it's sturdy, light, and portable. Its sustain key is based on standard mechanical keyboard-style keys, so you can customize it and swap the key out to make the pedal your own with your key of choice.

Capabilities PLUS 3's sustain side unlocks for instruments with a sustain jack, subject to the instruments capabilities are among other:

A momentary sustain button for instruments that don't have a dedicated physical sustain control (most don't!)

A dedicated drone/hold/arp latch switch for instruments that don't have one (many don't!). It's important to note that even if an instrument has a hold button, its sustain jack may unlock additional functionality or behaviour (for example, a button that simply holds notes does not cause Piano VSTs to resonate sympathetic strings in the way using sustain does.

Momentary and toggle control of any parameter mappable in your DAW synth's mod matrix/menu system, or effect pedal (for example, sostenuto, a freeze effect, dry/wet bypass, swapping presets, etc)
Capabilities PLUS 3's expression side unlocks for instruments with an expression jack are, among other:

PLUS 3 is particularly useful for adding an expressive physical fader to MIDI controllers that don't already have faders, but have an expression jack (for example, Native Instruments Kontrol MK3, or M32; or Korg's KeyStage).

Use PLUS 3's fader for direct access and expressive control of any single parameter mappable in your DAW, effects pedal or synth in ways not possible with a regular keyboard (for example, bowing a violin, an orchestral swell, fine tuning a track's level in the mix)

For DAWs, synths with a mod matrix or effect pedals with expression jack mapping capabilities (e.g. many Chase Bliss, Boss, EHX pedals, and the GHOST and GOLDEN MASTER pedals), use PLUS 3's fader as a macro control to change multiple parameters at once - almost similar to preset morphing, based on your instruments ability to map its expression input to multiple parameters

Notes: Modulation madness! All-analog multi-functional modulation effects processor featuring Phaser, Tremolo, Vibrato, and a Neo-modulated Wah. At the heart of the EHX Worm is a specially designed tone-bending engine that creates groundbreaking oscillatory effects.

True bypass
Mode selectable analog modulation effects: wah, phaser, vibrato, tremolo
Manual mode removes the modulation so the effects can be swept by hand
Optional expression pedal sweep capability
Tough and compact die-cast chassis
Power adapter included

Specifications

Circuit: Analogue
Bypass: True Bypass
Audio: Mono
Power Supply: 24VDC-100mA power adapter included
Dimensions (in): 4.75 x 4 x 2.25
Current Draw: 50mA
Year Released: 2008

Notes: Killer wah and cocked wah sounds!

The EHX Wailer Wah features the great sound and tone of the award winning Crying Tone Wah in a rugged, lightweight pedal and with a traditional rack and pinion style operating mechanism. It's also extremely affordable.

Traditional rack and pinion style operating mechanism
Super affordable
Rugged yet lightweight, at just over 1.5 pounds it's lighter than most popular wah pedals and a real weight saver for your pedalboard
9V battery included

SPECIFICATIONS
Circuit
Analog
Bypass
True Bypass
Audio
Mono
Power Supply
9V battery included (optional 9.6VDC-200mA power adapter not included)
Dimensions (in)
9.92 x 3.4 x 3.0
Current Draw
6mA
Year Released
2016

Notes: Vintage tremolo and panning with Wave Form and Shape control!

The EHX Stereo Pulsar Stereo Tap Tremolo generates vintage tremolo and panning that will fill any venue with rhythmic stereo energy. Its Wave Form switch allows you to change the modulation from triangle to square form. The Wave Shape control allows you to control transitions from negative to positive saw tooth or adjust pulse width. This all means you can create any type of stereo tremolo from pure vintage to ones never heard before.

Stereo outputs
Tough and compact die-cast chassis
9V battery included

Specifications

Circuit: Analogue
Bypass: Buffered Bypass
Audio: Stereo
Power Supply: 9V battery included (optional 9.6VDC-200mA power adapter not included)
Dimensions (in): 4.75 x 4 x 2.25
Current Draw: 17mA
Year Released: 2007

Notes: With three selectable attacks coupled with silky, long sustains, the Soul Preacher is your tool for sonic salvation!

The EHX Soul Preacher Compressor / Sustainer is a compact compressor/sustainer with variable parameters allowing extreme or subtle adjustments of the dynamic qualities of YOUR playing. Two knobs and one 3 way toggle switch control the output volume, the depth of the effect and the attack/decay characteristics of the effect.

True bypass
Sustain control adjusts the amount of sustain
Volume control sets the output level
Attack toggle switch provides 3 switch selectable settings of attack: fast, medium, slow
Fast attack: gives an aggressive hit with about a 20mS rise time. fast and musical
Medium attack presents a slower rise time of about 50ms, smooth and defined
Slow attack brings a musical 100ms rise time for a softer
Tough and compact die-cast chassis
9V battery included

Specifications:
Circuit: Analogue
Bypass: True Bypass
Audio: Mono
Power Supply: 9V battery included (optional 9.6VDC-200mA power adapter not included)
Dimensions (in): 4.5 x 2.75 x 2.1
Current Draw: 40mA
Year Released: 2007

Notes: Get the sound that made the Classic 1970 Small Stone famous!

The EHX Small Stone Phase Shifter generates thick sweeping phase shifting with liquid transparency. Feedback colour control adds a tingling swirl. Blues players dig the Stone's rapid rotating speaker effect. Country players add tasty seasoning to their chicken pickin'. Metal-heads dig its jet plane swoosh.

Variable rate control allows slow and smooth to rapid edge frequency sweeps
Colour switch turns up the feedback for a more pronounced phase shifter effects
Tough and compact die-cast chassis
9V battery included

Specifications:

Circuit: Analogue
Bypass: True Bypass
Audio: Mono
Power Supply: 9V battery included (optional 9.6VDC-200mA power adapter not included)
Dimensions (in): 4.5 x 2.75 x 2.1
Current Draw: 10mA
Year Released: 2006

Notes: The finest analogue chorus!

The EHX Small Clone Chorus is a reissue of the classic analogue chorus pedal popularised by Kurt Cobain. Depth and Rate controls create the finest sounds, from clear, rich and dimensional to warm pulsating warbles.

True bypass
9V battery included

Specifications

Circuit: Analogue
Bypass: True Bypass
Audio: Mono
Power Supply: 9V battery included (optional 9.6VDC-200mA power adapter not included)
Dimensions (in): 5.25 x 3.38 x 2.75
Current Draw: 12mA
Year Released: 2000

Notes: 1978 rarity reissued with modern updates and a tiny pico footprint!

The late 1970s rarity Electro-Harmonix Slap-Back Echo pedal is reissued with modern updates and a Pico footprint!

The 50s era gave birth to an iconic sound in which a single, short delay was utilized to add depth and rhythmic effect on countless recordings. The newly reissued all-analog design of the EHX Slap-Back Echo delivers this beloved classic sound and more in a Pico-sized pedalboard-friendly package. With three delay time settings and up to +20dB of boost, the Slap-Back Echo can achieve subtle doubling effects to intense bathroom reflections all with the distinct flavor of bucket-brigade (BBD) circuitry.

Housed in EHX's Pico-sized chassis, the Slap-Back Echo features Gain and Blend knobs as well as a Time switch. The Gain knob controls the input signal before the echo circuit and also adjusts the overall volume at the output with a boost of up to +20dB. The Blend knob mixes the dry signal and the echo signal from 100% dry to 100% echo. The Time switch selects between three different delay times: 45ms, 65ms, and 100ms.

Independent gain and blend knobs
Time switch with 45ms, 65ms, and 100ms delay times
Up to 20dB of boost
True-Bypass
Small, pico-sized chassis
9V power supply included

Specifications:
Circuit: Analogue
Bypass: True Bypass
Audio: Mono
Power Supply: 9.6VDC-200mA power adapter included
Dimensions (in): 3.65 x 2.0 x 2.0
Current Draw: 15mA
Year Released: 2023

Notes: Instantly switch to a different preset volume, with a fully-passive and colour-free circuit!

The EHX Signal Pad is a passive attenuator that allows you to instantly switch to a different preset volume. It's like your guitar's volume knob, with a fully-passive and colour-free circuit. Leave your amp's volume set high for overdrive, and use the Signal Pad to lower your level for a clean sound - then switch it off to kick in your amp's natural overdrive. You can also experiment with the Signal Pad anywhere in your effects chain - you'll bring out new tonal combinations from your favourite old pedals.

Specifications

Circuit: Analogue
Bypass: True Bypass
Audio: Mono
Power Supply: Optional 9V battery or 9.6VDC-200mA power adapter not included
Dimensions (in): 4.5 x 2.75 x 2.1
Current Draw: 3mA
Year Released: 2008

Notes: Classic fuzz reimagined and redefined!

Expanding on Electro Harmonix's first homage to the tone that launched a thousand riffs, the EHX Satisfaction Plus delivers a wide palette of tones from classic '60s snarl to creamy lead tone to thick, earth-shaking sludge!

Where the original Satisfaction Fuzz circuit was a focused tribute, the Satisfaction Plus Fuzz treats the classic tone to a modern control set that includes a FAT/NORM mode switch, Bias control, and Tone knob. The added FAT mode features a tone that is bigger and warmer than the NORM mode for woolly leads and giant wall-of-thunder riffs. The Tone control is an active tilt-shift EQ that inversely controls both the treble and bass of the fuzz for broad tonal shifting. Set the Bias control to dial in the fuzz character from balanced and open to gated and snarly.

Fuzz circuit inspired by early '60s fuzz pedals
FAT mode adds bigger, warmer tones
BIAS adjusts from sweet spot smooth to voltage-sag snarl
TONE is a tilt-shift EQ adjusts treble and bass
ATTACK and VOLUME control gain and output
True Bypass
9V battery included (9V adapter optional)

Specifications
Circuit: Analogue
Bypass: True Bypass
Audio: Mono
Power Supply: 9V battery included (optional 9.6VDC-200mA power adapter not included)
Dimensions (inches): 4.5 x 2.75 x 2.1
Current Draw: 5mA
Year Released: 2023

Notes: Delivers overdrive and distortion with impact, and the modern player in mind!

The EHX OD Glove provides a rich, overtone laden sound that doesn't get muddy. Responsive controls that take you from sparkling, clean boost through brown crunch and all the way to thick, saturated hi-gain. Advanced features like Tone Shift and selectable 9 or 18V internal voltage for surgical sound sculpting.

Versatile MOSFET overdrive/distortion
Tone Shift switch
Selectable 9V or 18V internal voltage
True bypass
Tough, compact die-cast chassis
9V battery included

SPECIFICATIONS
Circuit
Analog
Bypass
True Bypass
Audio
Mono
Power Supply
9V battery included (optional 9.6VDC-200mA power adapter not included)
Dimensions (in)
4.5 x 2.75 x 2.1
Current Draw
12mA
Year Released
2013

Notes: Lush, analogue chorus designed to re-create our legendary Small Clone!

Using a high quality bucket brigade chip and the same classic Small Clone circuit, this true analog design has been massaged and tweaked for accuracy and superior sonic qualities. The EHX Neo Clone delivers the Classic Small Clone sound at a price that sweeps the competition away.

Same amazing chorus as the legendary Small Clone
Pedal board friendly foot print
Total analog design
Sultry sonic texture with depth control
9V battery included

Specifications:
Circuit: Analogue
Bypass: True Bypass
Audio: Mono
Power Supply: 9V battery included (optional 9.6VDC-200mA power adapter not included)
Dimensions (in): 4.5 x 2.75 x 2.1
Current Draw: 12mA
Year Released: 2010

Notes: The Nano Pulsar takes tremolo beyond the ordinary and mundane. Equipped with a collection of tremolo-modulating waveforms and the option of operating in Triangle or Square Wave modes, the Nano Pulsar is a tremolo/panner treasure chest. In mono, it's simply amazing, or, connect it in stereo to create shifting waves of sound that surround you and fill your space with weaving, pulsating energy.

For all its power, the Nano Pulsar's layout is intuitive and using it is easy. There's often a perceived volume drop with tremolo when the effect is engaged so we've included a Volume control. It allows a player to fine-tune their output level when the effect is on, and is a very useful addition.

The Nano Pulsar's Depth knob adjusts the amount of tremolo applied to the signal. Past maximum (around 1 o'clock) the modulation becomes asymmetric and warps the audio signal between positive and negative phase. This creates a unique style of tremolo which sounds great alone or can be used in combination with other effects like the Oceans 11's Shimmer patch to produce compelling synth-like sounds and textures.

The Rate knob provides a full range of speed adjustments for the tremolo or pan effect, and when you start to max out the Rate and Depth controls you enter ring modulation territory for a surreal sonic joyride!

Unlock a world of advanced sound shaping and control. Create tremolo and panning effects that go from sublimely beautiful to downright shocking. The compact Nano Pulsar will be your do-it-all, go to pedal for all things tremolo and panning.

Specifications

Circuit: Analogue
Bypass: Buffered Bypass
Audio: Stereo Out
Power Supply: 9V battery included (optional 9.6VDC-200mA power adapter not included)
Dimensions (in): 4.5 x 2.75 x 2.1
Current Draw: 30mA

Notes: A nano-sized version of the Operation Overlord with the same great overdrive and distortion tones, but in mono for those who don't require stereo ins/outs. It's super versatile and ready for your axe be it guitar, bass or keys.

The EHX Nano Overlord is switchable between two modes: Normal and Boost. Normal mode provides low to medium gain sounds and relies on three amp-like JFET gain stages. When Boost mode is engaged it's like adding a pedal-type OD circuit in front of the JFET stages to really increase overall distortion. The pedal also features a Dry blend control which is invaluable for bass and keyboards, a 3-position input level selector switch and an active 3-band EQ.

Compact, yet feature laden overdrive and distortion pedal
Create sounds ranging from boost without the grit and sweet crunch all the way to intensely saturated overdrive and thick distortion
3-position input level switch lets you set the initial input gain level for a variety of instruments including guitar, bass and keyboards
Active 3-band EQ for superlative tone shaping
In Normal Mode three amp-like JFET gain stages provide low to medium gain sounds
In the switchable Boost Mode a classic pedal-style overdrive circuit is added before the JFET stages to increase overall distortion
The pedal's Dry blend control is especially useful for bass and keyboards because it lets you retain your instrument's articulation, harmonic content and bottom end
Power adapter included

Specifications

Circuit: Analogue
Bypass: Buffered Bypass
Audio: Mono
Power Supply: 9.6VDC-200mA power adapter included
Dimensions (in): 4.5 x 2.75 x 2.1
Current Draw: 50mA
Year Released: 2019

Notes: Built for the player who demands nothing less than hard-hitting distortion and an intense, aggressive sound!

The EHX Nano Metal Muff was built for the player who demands nothing less than hard-hitting distortion and an intense, aggressive sound. It's a combination of weaponized distortion and an extremely powerful EQ section that provides all the flexibility and tone-shaping needed to dial in an array of ultra-heavy sounds.

The Nano Metal Muff's newly designed noise gate is a superb addition to this high-gain pedal and eliminates unwanted hum when you stop playing. It features a noise floor threshold control (GATE) and its own LED to indicate when the gate is engaged.

A compact footprint and intelligent, straight forward controls complete the picture.

Voiced for the heavy metal player
Compact, pedalboard friendly footprint
Extensive EQ control: Bass +/- 14dB of cut or boost, Mid +/- 15dB and Treble +/- 10dB
VOL (volume) sets the pedal's output volume level
DIST adjusts input gain and distortion
Noise gate eliminates unwanted noise and includes an LED to indicate when the output signal is muted
9V battery included

Specifications:
Circuit: Analog
Bypass: Buffered Bypass
Audio: Mono
Power Supply: 9V battery included (optional 9.6VDC-200mA power adapter not included)
Dimensions (in): 4.5 x 2.75 x 2.1
Current Draw: 24 mA
Year Released: 2021

Notes: The most compact Bass Big Muff Pi ever is packed with the ginormous Bass Big Muff sound!

The huge Bass Big Muff sound now in a nano-sized package. Voicing inspired by the tank green Russian Big Muff with the classic Big Muff Pi layout of Sustain, Tone and Volume controls.

Controls for Volume, Tone and Sustain let you sculpt your distortion and drive, while the Dry switch mixes your dry bass with the EHX Nano Bass Big Muff's distortion.

Tailor your drive/distortion sound with Sustain, Tone and Volume knobs
Features a Dry switch that mixes your dry bass, at unity level, with the Nano Bass Big Muff's distortion
True bypass for maximum signal path integrity
Road worthy die-cast chassis
9V battery included

Specifications:
Circuit: Analogue
Bypass: True Bypass
Audio: Mono
Power Supply: 9V battery included (optional 9.6VDC-200mA power adapter not included)
Dimensions (in): 4.5 x 2.75 x 2.1
Current Draw: 4mA
Year Released: 2014

Notes: Originally designed by Josh Scott of JHS Pedals and graphic designer, Daniel Danger as a homage to Electro-Harmonix in what Josh and Daniel consider the company's design heyday of the 1970s, the EHX Lizard Queen Octave Fuzz is a nano-sized version of the pedal brought to life by the engineers at Electro-Harmonix that has all of the tones and vibes of the original circuit design by Josh. The tone is inspired by EHX's fuzz pedigree with a unique analog octave up circuit that has all the vibe of the original design first featured on the JHS Show in 2022. This creates a completely new and unique EHX fuzz sound we've never heard before. To further tell the tale, the pedal is adorned with vintage EHX-inspired graphics designed by Daniel.

Housed in EHX's Nano-sized chassis, the EHX Lizard Queen is a fixed gain fuzz pedal which features Volume, Octave, and Balance knobs. Volume controls the overall output volume level. The Octave control adjusts the level of the octave-up signal from zero to full octave chaos. Perfect for dialing in a crushing rhythm sound or a chimey, clanging lead sound. The Balance knob sets the tone balance between the smoother Shadow setting and the raspy, biting Sun setting. The effect of the Balance control is especially apparent with the octave set high.

Specifications

Circuit: Analogue
Bypass: True Bypass
Audio: Mono
Power Supply: 9V battery included (optional 9.6VDC-200mA power adapter not included)
Dimensions (in): 4.5 x 2.75 x 2.1
Current Draw: 5mA

Notes: Get the exact same tone and drive as the 1970s original!

With the price of vintage Hot Tubes soaring, countless guitarists have requested that we re-issue our 1970s Hot Tubes. Since its initial release in 1978, countless musicians have prized the scorching tube amp simulation the Hot Tubes delivers. They consider the original Hot Tubes to be indispensable, so it is rarely available on the vintage market.

The EHX Hot Tubes' Volume and Overdrive let you go from a gentle rasp that caresses your notes to a full-blown gain monster with a powerhouse punch. Sculpt your sound with the Tone control, or take a detour around the tone circuit with the Tone On/Off switch. True bypass for a pristine signal chain.

CMOS overdrive
Sensitive to your touch and guitar's volume
True Bypass
Tone bypass switch completely removes tone circuit
9V battery included

Specifications:
Circuit: Analogue
Bypass: True Bypass
Audio: Mono
Power Supply: 9V battery included (optional 9.6VDC-200mA power adapter not included)
Dimensions (in): 4.5 x 2.75 x 2.1
Current Draw: 18mA
Year Released: 2013

Notes: The EHX Flatiron Fuzz is a classic op-amp powered fuzz/distortion. With its late '70s style circuit and symmetrical hard clipping, it's EHX's take on the RAT2 pedal.

The Flatiron Fuzz is extremely versatile. At lower drive settings it remains fairly clean and adds a pleasing mild distortion. As the drive is turned up it transports you to a world of arena rock and produces spectacular, thick, meaty tones.

The stellar sound of the Flatiron Fuzz is a result of its classic, late '70s style circuitry and the fact that it delivers symmetrical hard clipping. As a point of reference, you might refer to the old Rat pedal, but you'll prefer the Flatiron.

The Flatiron Fuzz features three controls: Volume, Drive and Filter. Volume sets the output level while Drive adjusts the amount of sustain and distortion. The unique Filter control is actually a low pass filter with a movable cut-off frequency. This is especially cool because it lets you dial in just the right amount of high-end... from dark to raunchy.

Electro-Harmonix trivia: The Flatiron Fuzz is named after the historic Flatiron Building in New York City. It's an iconic landmark located just down the block from EHX headquarters in the 1970s and it's the building pictured on the pedal.

Specifications:

Circuit: Analogue
Bypass: True Bypass
Audio: Mono
Power Supply: 9V battery included (optional 9.6VDC-200mA power adapter not included)
Dimensions (in): 4.5 x 2.75 x 2.1
Current Draw: 5mA
Year Released: 2018

Notes: Get lush EHX vibrato and chorus in a compact, pedalboard friendly package with unique control options!

No one does bucket-brigade effects like Electro-Harmonix and with the Eddy you get lush EHX vibrato and chorus in a compact, pedalboard friendly package with unique control options.

The Eddy gives you envelope and expression pedal control over modulation rate and depth. That means you can control either with your playing dynamics. Plus, if you plug in an EXP pedal, you can use it to control the rate or depth at the same time.

The Eddy also features LFO shape warping which can transform the shape of the modulation from a standard sine wave to something totally asymmetric. Plus, the pedal's tone control lets you make the sound brighter or darker.

EHX Founder, Mike Matthews, says: EHX's long history in creating bucket-brigade based pedals goes all the way back to the Electric Mistress Flanger, the Memory Man Analog Delay and the Clone Theory Chorus/Vibrato. The new Eddy springboards off that rich heritage and adds modern control to classic sounds.

Specifications

Circuit: Analogue with Digital Control
Bypass: Buffered Bypass
Audio: Mono
Power Supply: 9.6VDC-200mA power adapter included
Dimensions (in): 4.5 x 2.75 x 2.1
Current Draw: 40mA
Year Released: 2021

Notes: Full-range overdrive for a wide, sculptable tone!

The EHX Crayon Full-Range Overdrive is a versatile overdrive with independent Bass and Treble controls and an open frequency range that provides players with a musical alternative to customary mid-focused overdrive pedals. It delivers a range of sounds going from a suggestion of dirt to full-on distortion and is equally impressive all by itself or when driving another overdrive pedal.

Full-range overdrive with a lush, rich, warm tone
Independent Bass and Treble controls
True Bypass for maximum signal path integrity
Compact pedalboard-ready pedal
9V battery included

Specifications

Circuit: Analogue
Bypass: True Bypass
Audio: Mono
Power Supply:9V battery included (optional 9.6VDC-200mA power adapter not included)
Dimensions (in): 4.5 x 2.75 x 2.1
Current Draw: 10mA
Year Released: 2015

Notes: An ultra-compact workhorse that's perfect as part of a portable guitar rig, or as an emergency backup should your main amp break down.

The 15Watt Howitzer guitar amp/preamp is an ultra-compact workhorse that's perfect as part of a portable guitar rig, or as an emergency backup and gig saver should your main amp break down. It's super flexible, like a musical chameleon, and depending on the gear you use and your style, will fit in the broadest range of genres.

The 15Watt Howitzer's Volume and Gain controls let you go as clean or as crunchy as you want while the Bass, Mid and Treble knobs provide plentiful tone shaping. Its FX Loop gives you the option of putting effects like reverb and delay after the preamp. Of course you can still run your guitar straight into pedals and then right into the 15Watt Howitzer's input jack.

EHX's Founder, Mike Matthews, said: Dig it! The sandwich-sized 15Watt Howitzer is perfect as part of a compact guitar rig or backup. But the thing I dig the most, is the tone that emanates from the Howitzer. It's super versatile and depending on what kind of setup you're running fits into any style that's your bag!

15 watts of power, but small enough to fit on a pedalboard or pack in a gig bag
A full set of sound shaping controls: Volume, Gain, Bass, Mid and Treble
Bright/Norm switch: choose between a subtle top boost with more presence or a slightly darker top end
Solid-state class D amp design for maximum output efficiency and minimal space requirements.
FX loop with Send/Return jacks lets you place effects between the 15Watt Howitzer's preamp section and Volume knob
Power adapter included

Specifications:
Circuit: Analogue
Audio: Mono
Power Supply: 24VDC/1000mA power adapter included
Dimensions (in): 4.75 x 4 x 2.25
Current Draw: 100mA
Year Released: 2021

Notes: A sophisticated noise gate that can tame a single pedal or an entire effects loop! The Silencer's three-control layout provides precise fine-tuning to fit your system, axe and playing style. Threshold adjusts how much level is required to open the noise gate and allow a signal to pass thru. Reduction regulated the degree to which the gated signal is reduced and is variable between -70dB and +4dB. Release controls how long the gate remains open after the signal drops below the Threshold. Release time is variable between 8ms and 4 seconds.

I/O includes 1/4" Input, Output, Send and Return jacks. The footswitch selects whether The Silencer is engaged or in bypass mode; buffered bypass allows the effects loop to remain in your signal path when the gate is bypassed. A built-in AC jack accepts a standard power supply like the EHX 9.6DC unit (optional) and the pedal comes with a 9V battery.

Conquer noise with The Silencer!

Notes: Electro-Harmonix has reissued their late-1970's era Op-Amp Big Muff Pi. Sometimes also referred to as the IC or V4 Big Muff, the original circuitry has been faithfully re-created while several practical enhancements have been added including a compact, die-cast chassis and true bypass switching.

According to Electro-Harmonix founder, Mike Matthews, "The Op-Amp Big Muff was popularized by the brilliant Billy Corgan who first used it on the Smashing Pumpkins' epic 1993 album Siamese Dream. After he was videotaped playing and talking about the reissue, Billy stated: "The magic's still in the box, I can still get what I'm looking for!"

The pedal relies on op-amps rather than transistors and three gain stages rather than four, to create its signature sound. It's a sound that's been described by noted Big Muff collector and historian, Kit Rae, as: "a huge, crushing Big Muff sound with more crunch...great for grungy, wall-of-sound distortion, heavy rhythm playing and heavy leads."

The Op-Amp Big Muff Pi features standard controls: Sustain, Tone and Volume, plus a Tone switch for bypassing the tone circuit. It comes equipped with a 9V battery or can be powered by an optional 9-volt AC adapter.

Notes: The EarthQuaker Devices Passive ABY box is the perfect solution if you can't decide when and where you would like your signal to go. In its most basic form, this passive little box is commonly used to run a single input out to two destinations and lets you choose between using either individually or both at the same time.

The most common problem an ABY is used to solve, is one input being sent to out to two amplifiers, but it doesn't have to stop there! Because of its completely passive circuitry, Passive ABY can also be used in reverse to choose between two inputs to a single output. Use it to simultaneously run two different instruments to one source input. An oboe and a bass, a keyboard and a harmonica, a lute and a modular synth... you know, whatever!

This compact little device has a small footprint, won't take up much real estate on your board and is built using high quality parts that will withstand years of use and keep going.

Notes: A buffer is an important tool to combat tone loss with long cable runs or in signal chains running lots of true bypass pedals. With its high 1 M ohm input impedance and low 100 ohm output impedance, the EarthQuaker Devices Buffer/Preamp will restore your tonal integrity, to give you back the clear and dynamic signal you deserve and your amp craves.

Want more? Not only will Buffer/Preamp restore high end loss, this device has a little trick up its sleeve that will also give your low end a subtle, yet powerful, little kick for some added dimension. While it is commonplace to add a buffer at the beginning of the signal chain, we find this to best at the end for optimum results. That said, it'll work great anywhere you decide to place it. For best results, make sure the EarthQuaker Devices Buffer/Preamp is placed AFTER any fuzz pedals that typically like to see the guitar at their input.

Notes: The EarthQuaker Devices A/B Box is a simple tiny tool that lets you choose between two of pretty much anything. Because of its completely passive design, there is no circuitry between the input and outputs which means it can be used in both directions. Use it to switch between two amps, switch between two channels on a multi-channel amp, use it as tuner out/mute switch, run a dry path and a wet path or even switch between two instruments!

The time to passively choose is now!

Notes: The Dreadbox PSYCLOP is the ultimate modern utility device. It's an Effects Chain Loop with Dry/Wet mix control, Signal Attenuator and Boost as well as Expression to CV (Control Voltage) converter, all in one easy to use package suitable for string instruments or synthesizers and is also Eurorack compatible.

PSYCLOP is not your average Effects Loop Mixer. Capable of managing any type of signal from instruments or effects pedals, PSYCLOP seamlessly blends them with its parallel effects loop.

Its features include Input Attenuation of up to -20 dB and an Output Gain Boost of up to +20 dB in order to match any signals. For unity gain, simply set the Input Attenuation Amount to 100% with the IN control and using the OUT knob, adjust the Output Gain Level to 0%.

To avoid phase cancellation issues between the dry and wet signal paths, the PSYCLOP also features a simple but effective Effects Loop Phase switch, which is easily accessible on the pedal's side.

Additionally, PSYCLOP is capable of converting TRS Expression signals to CV and makes them usable with most Eurorack gear, making it a perfect device for synth fans and sound design enthusiasts. The pedal's EXP knob attenuates the CV output. When nothing is connected to its CV IN jack, the CV OUT jack will output 0-5V depending on this knobs' setting and a connected EXP pedal's position.

So all you have to do is plug in and embark on your next thrilling sound design adventure.

Notes: The Benchmark in Guitar Distortion

The DS-1 Distortion is a true icon in the world of guitar effects. Introduced in 1978, BOSS's first distortion pedal defined a bold new sound, delivering hard-edged attack and smooth sustain that's been a staple of players for generations. The DS-1 is the top-selling BOSS compact pedal ever, and its original, unchanged design continues to inspire the creation of great music everywhere. The classic DS-1 tone is behind the signature sounds of numerous rock legends, and is ready to fuel your own signature sound today.

Genre-Defining Distortion

Before the DS-1, most distortion pedals produced harsh, buzzy tones and muddy sound at high gain settings. In 1978, BOSS engineers changed all that by developing a unique distortion circuit for the DS-1 that produces tight, hard-edged gain with rich harmonics while retaining the unique characteristics of different guitars and playing techniques. Hard rock, metal, and punk styles began to flourish in the '70s and '80s, and the DS-1's tone had a defining influence on these genres. That trend has endured through multiple generations, and players around the world continue to seek out the classic DS-1 sound.

Gain from Mild to Heavy

From its modest three-knob interface, many different sound colours can be coaxed from the DS-1. Its pioneering two-stage circuit incorporates both transistor and op-amp gain stages. This approach is critical to the DS-1's characteristic low-frequency fullness, which is loved by guitarists that play heavy music genres. The distortion knob offers an extremely wide range, from a mild boost for driving amps and pedals to full-throttle gain for monster rock riffs.

Powerful Tone Shaping

Unlike typical tone controls that only cut highs, the DS-1's tone circuit features an innovative design that offers far more range. Turning the knob clockwise increases highs and decreases lows, while going counter-clockwise has the opposite effect. This lets you dial in everything from tight, cutting rhythm sounds to smooth, fat lead voices. The tone control is particularly effective for maintaining low-end definition when using the DS-1 as a booster with vintage-style amps, which often sound muddy when driven with other distortion pedals.

Nominal Input Level-20 dBu
Input Impedance: 1 M ohm
Nominal Output Level-20 dBu
Output Impedance: 1 k ohm
Recommended Load Impedance: 10 k ohms or greater
Controls: Pedal switch, TONE knob, LEVEL knob, DIST knob
Indicator: CHECK indicator (Used for indication of check battery)
Connectors:
INPUT jack: 1/4-inch phone type
OUTPUT jack: 1/4-inch phone type
DC IN jack
Power Supply:
Alkaline battery (9 V, 6LR61) or Carbon-zinc battery (9 V, 6F22)
AC adaptor (PSA series: sold separately)
Current Draw10 mA

Expected battery life under continuous use:
Carbon: Approx. 50 hours
Alkaline: Approx. 80 hours
* These figures will vary depending on the actual conditions of use.
Accessories: Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information"), Carbon-zinc battery (9 V, 6F22)
Option (sold separately)AC adaptor (PSA series)

Size & weight (incl. battery)
Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Height59 mm / 2-3/8 inches
Weight: 360 g / 13 oz

Notes: Improves your overall tone

The CS-3 Compression Sustainer pedal compresses louder signals while boosting lower signals, providing smooth sustain without degrading the original sound quality. This is the perfect pedal for guitarists and bassists who want to sound their best.

Specifications

Nominal Input Level: -20 dBu
Input Impedance: 1 M ohm
Nominal Output Level: -20 dBu
Output Impedance: 1 k ohm
Recommended Load Impedance: 10 k ohms or greater
Bypass: Buffered bypass
Controls: SUSTAIN knob, ATTACK knob, TONE knob, LEVEL knob, Pedal switch
Indicator: CHECK indicator (Serves also as battery check indicator)
Connectors: INPUT jack: 1/4-inch phone type, OUTPUT jack: 1/4-inch phone type, DC IN jack
Power Supply: Carbon-zinc battery (9V, 6F22) or Alkaline battery (9V, 6LR61), AC adaptor (PSA series: sold separately)
Current Draw: 20 mA

Expected battery life under continuous use: Carbon: Approx. 10.5 hours, Alkaline: Approx. 26 hours
*These figures will vary depending on the actual conditions of use.
Accessories: Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information"), Dry battery/9 V type (6F22)
Options (sold separately) AC adaptor: PSA series
Size & weight

Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Height: 59 mm / 2-3/8 inches
Weight: 380 g / 14 oz