Rode

Notes: Top quality performance from Rode's Interview Pro, compatible with all Rode Series IV wireless receivers. Up to 200 metres range, with broadcast-standard sound and over 40 hours of on-board recording.

Supplier's Notes:
The Interview PRO is a broadcast-quality handheld wireless microphone that's ideal for capturing professional audio in a wide range of content creation, media and broadcast applications. It pairs seamlessly with all RODE Series IV wireless receivers, utilising state-of-the-art 2.4GHz digital transmission to deliver incredibly stable audio with a range of up to 200m (line of sight). Featuring a high-quality omnidirectional condenser capsule, 32-bit float on-board recording, and intelligent GainAssist technology, it delivers professional results in any recording scenario.

The Interview PRO can be used as a standalone field recorder, but for wireless operation, a RODE Series IV receiver or compatible product is required.

Pristine Wireless Audio in Your Hands

Combining the ultimate flexibility of RODE's cutting-edge wireless technology with the pristine audio quality of a broadcast-grade condenser microphone, the Interview PRO is a compact, versatile and professional solution for capturing your voice in a wide range of applications, from interviews and media to small presentations and content creation.

The Perfect Mic for Your RODE Wireless System

The Interview PRO is compatible with all RODE Series IV wireless receivers. This includes the ultra-versatile Wireless PRO, Wireless ME and Wireless GO II compact wireless systems for recording broadcast-quality audio into your camera, smartphone, or even a computer. It can also be paired directly to the RODECaster Pro II and Duo, just like an XLR microphone - perfect for podcasts and small presentations where you need the freedom of wireless.

The Leaders in Wireless Audio Solutions

The Interview PRO utilises RODE's state-of-the-art Series IV 2.4GHz digital transmission with 128-bit encryption to deliver incredibly stable wireless audio with a range of up to 200m, line of sight, and is optimised for extremely stable close range operation. It pairs in seconds with minimal setup required, so you can get creating right away.

Perfect Sound, Every Time

Designed to be as easy to use as possible, the Interview PRO features RODE's intelligent GainAssist technology, which automatically controls your audio level on-the-fly to make sure it doesn't clip or distort. With two different modes available, GainAssist will ensure your audio is perfect every time.

Broadcast-grade Voice Capture

The Interview PRO's broadcast-grade condenser capsule delivers rich, detailed voice reproduction and its omnidirectional polar pattern makes it very forgiving when it comes to mic placement - the perfect combination for street interviews, presenting and more. Featuring an internal pop filter, an included windshield, and internally shock mounting around the capsule, the Interview PRO is primed to protect against plosives, wind noise and handling noise, keeping your audio pristine.

Present, Interview, Create

Whether you're presenting in the field, conducting street interviews, hosting a casual podcast or creating content on the move, the Interview PRO's unique set of features make it an ultra-versatile and high-quality solution for capturing your voice.

Never Lose a Recording

With over 40 hours of 32-bit float on-board recording, you have the ability to recover any recording in post-production that was too loud or too quiet, so you can always be sure that your interview, presentation or performance has been captured safely. You can even record without the Interview PRO connected to a receiver, making it an ideal portable field recorder.

RODE Central

RODE Central is an easy-to-use desktop and mobile companion app that allows you to configure your Interview PRO anywhere, access and export your on-board recordings (desktop only), and update your firmware. Download it for free to unlock the full potential of your Interview PRO.

Note: OS Requirements - MacOS 10.15 or later; Windows 10 Version 1803 or later; iOS 14 or later; Android 9.0 or later.

Specifications

Capsule: Electret Condenser
Acoustic Principle: Pre-polarised pressure transducer
Polar Pattern: Omnidirectional
Frequency Range: 20Hz - 20kHz
Signal-to-Noise Ratio: 74dB
Dynamic Range: 102dB (as per IEC651)
Maximum SPL: 122dB SPL
Wireless Connectivity: RODE Series IV Wireless 2.4GHz
Transmission Range: Up to 200m (line of sight)
Computer Connectivity: USB-C (USB SuperSpeed 5Gbps)
Power Requirements: In-built lithium-ion rechargable
(charged via USB)
Recording Capacity: 32GB (over 40 hours of recording)
Operating Time: Up to 25 hours
Bit Depth: 32-bit
Sample Rate: 48 kHz

Minimum OS Requirements: macOS 11
Windows 10: iOS 14, Android 11

Compatible RODE Software: RODE Central, RODE Connect, UNIFY, RODE Reporter, RODE Capture, RODE Central Mobile

Mechanical specifications

Colour: Black
Weight (grams): 250
Dimensions (millimetres):
Length: 258
Width: 47
Height: 47

What's in the Box

1 x Interview PRO
1 x RM3
1 x SC34
1 x Windshield
1 x ZP2

Notes: A workhorse studio condenser microphone with a warm, silky character, exceptionally low noise and high SPL handling - ideal in a wide range of studio applications.

The World's Most Popular Studio Microphone

Since it launched over 30 years ago, the NT1 has become the world's most popular studio microphone and the go-to for countless creators across the globe - from bedroom musicians and studio professionals to streamers, podcasters and voice over artists. The NT1 Signature Series carries on this legacy, delivering classic studio sound for today's creators.

Iconic Signature Sound

Featuring our stunning HF6 1-inch true condenser capsule, the NT1 Signature Series boasts the same iconic sound signature that its forebears are revered for. Sparkling top end, highly detailed midrange, and rich, warm bass make it shine in almost any recording application you can imagine - from vocals, piano and acoustic guitar to drums, percussion and electric guitar.

Your Mic, Your Way

For the first time in the NT1's 30-year history, this iconic microphone is available in a range of iconic colours. This limited-edition collection features five vibrant colourways alongside the timeless black finish, including red, green, purple, pink and blue.

A True Workhorse

A true workhorse that excels in a wide range of studio applications. With an exceptionally low noise floor and incredibly high max SPL, it captures everything from whispers to drums with the utmost clarity. The perfect all-rounder studio microphone.

Legendary RODE Quality

The NT1 Signature Series is designed and made using the highest-grade components in RODE's precision manufacturing facilities in Sydney, Australia. It's built to last, with a rugged body machined from high-grade aluminium and comes with our industry-leading 10-year warranty, so you can rest assured it will remain your go-to for the long haul.

Premium Accessory Kit

Keep your recordings pristine with the studio-grade shock mount and pop filter included with the NT1 Signature Series, the perfect tools for minimising audio artifacts caused by knocks, rumbles and plosives. It also ships with a premium XLR cable so you can start creating right away - just plug straight into your audio interface or mixer and start recording exceptional audio.

NT1 Signature Series User Guide

Discover everything you need to know about using your NT1 Signature Series studio condenser microphone in this comprehensive user guide, including how to attach and mount your microphone, pop filter and shock mount, and how to connect and power your NT1 Signature Series.

Key Features

Large-diaphragm cardioid condenser microphone
HF6 1-inch true condenser capsule, precision engineered to sub-micron tolerances
Tight cardioid polar pattern for excellent background noise rejection
Classic NT1 sound signature - rich, warm bass, detailed midrange and sparkling highs for exceptional performance in a wide range of studio applications
Smooth frequency response and high sensitivity for incredible balance and clarity
Extremely low noise (4dBA) - the world's quietest studio condenser microphone
High SPL handling capabilities (142dB) for capturing very loud sound sources
Studio-grade shock mount and pop filter and premium XLR cable included
Available in classic black or a range of limited-edition colours, including red, green, purple, pink and blue
Rugged aluminium body with a high-grade finish - incredibly resistant to scuffs and scratches
Industry-leading 10-year warranty
Designed and made in RODE's precision manufacturing facilities in Sydney, Australia


Specifications

Acoustic & Electrical

Acoustic Principle: Pressure gradient
Active Electronics: JFET impedance converter with bipolar output buffer
Capsule: 1.00"
Polar Pattern: Cardioid
Address Type: Side
Frequency Range: 20Hz - 20kHz
Output Impedance: 100O
Maximum SPL: 142 dB SPL
Equivalent Noise (A-Weighted): 4dBA
Sensitivity: -32 dB re 1 Volt/Pascal (25 mV @ 94 dB SPL) +/- 2 dB @ 1 kHz
Analogue Power Requirements: P48
Analogue Output Connection: 3-pin XLR

Mechanical

Weight (grams): 313

Dimensions (millimetres)
Length: 52
Width: 52
Height: 189

What's in the Box

Studio Condenser Microphone
1 x NT1 Signature Series
1 x SM6
1 x XLR Cable

Notes: The RODE NTH-100 professional over-ear headphones offer exceptional sonic performance and superior comfort that inspires creativity. Featuring custom-matched drivers that deliver an incredibly accurate frequency response and ultra-low distortion, and a precision-engineered acoustic design optimised for exceptional detail and clarity, they are ideal for all forms of content creation, including music production, mixing and audio editing, podcasting, streaming and location recording. Luxurious Alcantarar cushions with revolutionary CoolTech gel ensure maximum comfort, particularly for long-format content creation, and the fully adjustable headband with the innovative FitLok locking system provides the perfect fit every time. Your search for the perfect headphones is over.

Audio as it's Meant to Be Heard

The NTH-100s are meticulously crafted to deliver exceptional sonic performance for critical listening, from monitoring to mixing to mastering. Featuring custom-matched dynamic drivers that have been painstakingly tuned for an incredibly accurate frequency response and extremely low distortion, they are remarkably natural-sounding headphones. These qualities are further enhanced by the unique contoured earcup construction, which is optimised to ensure exceptional detail and clarity, and memory foam cushions for excellent passive noise isolation. They are precision-crafted to retain every detail and every nuance of sound they produce. In other words, audio as it's meant to be heard.

Incredible Accuracy, Exceptional Clarity

The NTH-100 drivers feature a custom voice coil with a four-layer ultra-high-tension aluminium alloy at its core, which is coupled to an ultra-stiff triple-layer Mylar diaphragm. Combined with a rare-earth neodymium magnet and innovative phase plug inspired by the award-winning NTG5 microphone, these high-grade components ensure an accurate frequency and phase response across the whole audible spectrum for an incredibly articulate listening experience.

The Most Comfortable Headphones Ever. Period.

When it comes to creating, comfort is everything, and the NTH-100s promise comfort like nothing else. The luxurious Alcantarar earcup and headband cushions offer a premium feel that enhances the sensory experience from the moment they are put on - supremely soft and highly breathable. Underneath the Alcantara is a layer of revolutionary CoolTech gel, which absorbs and dissipates heat, actively cooling your head and ears to significantly reduce wearing fatigue. The unique ergonomic design of the earcups is also extremely comfortable, with bi-directional movement and memory foam providing a custom-fit feel for any head size or shape (even if you wear glasses), and the fully adjustable headband with the innovative FitLok locking system ensures they feel exactly the same every time you put them on.

Style in a Class of its Own

The perfect marriage of classic aesthetics and cutting-edge industrial design, the NTH-100s are instantly iconic. With clean lines and sleek, high-grade finishes, including the unique ergonomic earcup design and premium Alcantarar cushions, they look as good as they feel. Customise your NTH-100s with the high-quality NTH-CABLE, available in four vibrant colours - pink, green, blue and orange - and in 1.2m and 2.4m lengths.

Built For Creative Endurance

The NTH-100s are built to withstand the rigours of creating day in, day out. Every component is designed to endure, from the high-strength spring steel headband with its scratch-resistant coating to the highly durable Alcantarar cushions to the locking cable connectors. The cushions and cable are also user replaceable. This modular design ensures maximum longevity, even with vigorous daily use. Every pair is designed and made in RODE's precision facilities in Sydney, Australia using high-grade materials, so you can take on any creative endeavour knowing they'll be with you for the long-haul.

What's in the Box:

1 x NTH-100 - White
1 x NTH-100 Bag
1 x NTH-CABLE
1 x NTH-100 ID Set
1 x 3.5mm to 1/4" Adapter

Acoustic & electrical specifications

Transducer Size (millimetres): 40mm
Operating Principle: Dynamic
Frequency Response: 5Hz - 35Khz
Impedance: 32O
Sensitivity: 110dB/V
Maximum Input Power: 1700mW, 1% THD @ 1kHz
Ear Coupling: Circumaural
Ambient Noise Attenuation: 20dBA
Connection Type: Dual TRRS Cable Attachment

Mechanical specifications

Weight (grams): 350g
Dimensions (millimetres):
Length: 80mm
Width: 190mm
Height: 188mm
Cable Length (millimetres): 2400mm

Notes: The PodMic is a broadcast-quality dynamic microphone optimised for incredible performance in podcasting, livestreaming, and other speech or vocal applications. Offering a rich, full-bodied sound, with an internal pop filter for minimising plosives, internal shockmount for reducing vibrations, and a swing mount for easy positioning, the PodMic will take your content to the next level.

Find Your Voice and Own It

The PodMic is a broadcast-grade end-address microphone optimised for streaming, podcasting and other speech applications, such as voice-over recording and gaming. It features an in-built pop filter, making it easy to achieve that classic 'radio' sound heard on the world's best podcasts, and an integrated swing mount, allowing you to position your microphone exactly where you need it to be. Find your voice with the PodMic.

Broadcast Sound, Broadcast Ready

The PodMic is a broadcast-grade end-address microphone that delivers exceptional sound quality for any speech application, from livestreaming on Twitch to recording a professional podcast. Featuring a high-quality dynamic capsule, the PodMic captures every detail of your voice with richness and depth, with a tight cardioid polar pattern offering superior room noise rejection. This ensures excellent performance in less-than-ideal recording environments, keeping you in the spotlight.

Sleek Looks. Built to Last

The PodMic offers sleek looks with a compact form factor that makes it the perfect addition to any podcasting and streaming setup. And its hard-wearing stainless steel mesh grille and robust all-metal body ensure it can take on the rigours of recording for the long-haul. Built like a tank is an understatement.

What's in the Box:

1 x PodMic - White

Specifications

Acoustic Principle: Dynamic
Polar Pattern: Cardioid
Frequency Range: 50Hz ~13 kHz
Output Impedance: 320O
Sensitivity: -57.0dB re 1 Volt/Pascal
(1.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Output Connection: XLR
Phantom Power: Not required
Material: Metal (material TBD)

Colour:
Black
White

Weight (grams): 937
Dimensions (millimetres): 172 (length) x 109 (width) x 62 (height)
Compatible RODE Accessories: PSA1
Features list: Integrated swing arm

Notes: The PodMic USB is an ultra-versatile dynamic microphone ideal for podcasting, streaming, gaming, voice overs, and other speech applications for content creation. It delivers rich, full-bodied sound and features both an XLR and USB output for connecting to an audio interface or mixer like a classic broadcast microphone, or directly to a computer for plug-and-play recording. The digital USB output features RODE's ultra-low-noise, high-gain Revolution Preamp™ and powerful APHEX digital signal processing for capturing studio-quality sound with ease, and a zero-latency headphone output complete with level control, making recording seamless. For even more versatility, the PodMic USB is also fully compatible with iOS and Android mobile devices, offering a high-quality portable podcasting or streaming solution.

Swiss Army Mic

The PodMic USB is a super versatile dynamic microphone for capturing rich, broadcast-quality audio in any scenario you can throw at it. Thanks to its dual XLR and USB connectivity, it is just at home in a recording studio connected to an analogue mixer as it is plugged straight into your computer, or you can even hook it up to your smartphone for a grab-and-go recording rig. PodMic USB is perfect if you want one flexible microphone that will make your content sound amazing in any context.

Pro Sound When Creativity Calls

Featuring a high-power neodymium capsule, the PodMic USB delivers warm, highly detailed audio with incredible clarity, making it exceptional in speech applications. It features an internal pop filter for minimizing plosives, an internal shockmount to reduce vibrations, and comes with a studio-quality external pop filter to make sure you can capture crisp, clean audio every time.

All-in-one Recording Solution

The PodMic USB features powerful on-board DSP (Digital Signal Processing) powered by APHEX that makes it easy to capture professional sounding audio. Use VoxLab™ to quickly dial in the perfect sound, or dive deep into the granular controls for the high-pass filter, noise gate, compressor, and the legendary Aural Exciter™ and Big Bottom™. Monitor your audio with zero latency thanks to the headphone output, complete with on-board level control for controlling the volume of your audio. The perfect all-in-one recording solution.

Take Your Studio On The Road

Not only can you connect the PodMic USB to your favourite audio interface, mixer, laptop or computer, but it also connects seamlessly with iOS and Android smartphones and tablets. This means PodMic USB is the perfect tool for capturing broadcast-grade audio while you're away from the studio, or just want a more compact setup - it's a professional and portable recording rig for the road.

Sleek Looks, Built to Last

With its classic broadcast microphone aesthetic and sleek matte black finish, the PodMic USB exudes class, but it is also incredibly rugged and built to last. The PodMic USB is constructed from high-grade components housed in a super durable body, more than capable of surviving the rigours of everyday recording in the home, in the studio and on the road, and comes with an industry-leading five-year warranty.

PodMic USB User Guide

Discover everything you need to know about using your PodMic USB in this comprehensive user guide, including how to record with both the analogue and digital connections, using the advanced DSP and more.

Compatible Rode Accessories: PSA1+, XLR-CABLE, Backpack, SC19

Specifications

Acoustic & Electrical:
Acoustic Principle: Dynamic
Polar Pattern: Cardioid
Address Type: End
Frequency Range: 20Hz - 20kHz
Output Impedance: 460O (XLR)
Maximum SPL: 148dB SPL
Equivalent Noise (A-Weighted): Analogue: 26dBA, Digital: 19dBA
Sensitivity: -57 dB re 1 Volt/Pascal (1.4 mV @ 94 dB SPL) +/- 3dB
Analogue Output Connectors: 3-pin XLR, 3.5mm headphone jack

Digital:

Digital Power Requirements: Via USB: 5V @ 100mA
Output Connection: USB-C
Bit Depth: 24-bit
Sampling Rate (kHz): 48kHz
Processing: APHEX digital signal processing
Minimum OS Requirements: Windows 10 / Mac OS 10.15

Mechanical:

Weight (grams): 900
Dimensions (millimetres): Length: 123, Width: 109: Height: 110

What's in the box:

PodMic USB
Pop Filter
SC29 (3m USB-C to USB-C Cable)

Notes: The PSA1+ is the ultimate studio boom arm for podcasters, streamers and broadcasters. Its innovative parallelogram spring design ensures ultra-smooth movement and precise microphone placement in any position, while its fully damped internal springs and neoprene arm cover eliminate mechanical noise for completely silent operation. Integrated cable management ensures your setup is tidy and its extended reach and full 360-degree rotation make it easy to position your microphone exactly where it needs to be. Take your content to the next level.

Sleek. Stable. Silent.

Combining sleek looks with completely silent operation and peerless stability, the PSA1+ is the perfect mount for your microphone. Its innovative parallelogram spring design keeps the placement of your mic constant, even as the height is adjusted, and ensures movement is ultra-smooth. Rubber contact points provide superior isolation from knocks, bumps, and keyboard or mouse clicks while its fully damped springs keep noise to an absolute minimum.

Just Add Your Mic

Whether you're streaming, podcasting or broadcasting, the PSA1+ will slot seamlessly into your setup - just add your favourite mic and start recording. It is compatible with all standard shockmounts and both end and side-address microphones are accommodated by the flexible mounting system either in the downward or upright position. Microphones weighing as little as 94g all the way to 1.2kg are supported with complete stability and the integrated cable management system can be used with both XLR and USB cables.

Flexible by Nature

The PSA1+ is designed to be as flexible as you need it to be. Perfectly balanced movement, extended reach and full 360-degree rotation allow you to position your microphone with absolute precision, so you always sound your best. High-quality locking nuts on the mounting system make it easy to adjust the angle of your mic and both a threaded desk mount and a padded desk clamp are included, making it a breeze to integrate into any home or professional studio.

Mechanical Specifications:

Thread Size: 3/8 or 5/8 (with included adaptor)
Horizontal Reach: 940mm
Vertical Reach: 860mm
Minimum Weight Supported: 94g
Maximum Weight Supported: 1200g

What's in the Box:

1 x PSA1+ - White
1 x Desk Mount Clamp
1 x 3/8" to 5/8" Adaptor
1 x Threaded Desk Mount

Notes: White version of Rode's user-friendly, all-in-one production studio. Aimed at podcasters and content creators, the RodeCaster Duo makes it easy to achieve great results.

*** Software update October 2024 ***

Introducing a massive update for the RODECaster Pro II and RODECaster Duo - virtual devices have landed!

This new feature allows users to treat their software as if it were a microphone connected to their RODECaster. This means they can assign each app to a fader and individually apply effects and processing, create custom routing and record them individually.

This update is currently available in beta, with a full public release coming soon. To access virtual devices whilst in beta, users will need to join the RODECaster Beta Program.

Supplier's Notes:
The RODECaster Duo is the ultimate compact audio solution for podcasters and content creators. Combining revolutionary features with superior sound quality, endless customisability and unmatched ease of use, the RODECaster Duo is all you will ever need to record incredible audio for your content.

Everything You Need to Sound Spectacular:

The RODECaster Duo is the world's most powerful all-in-one audio production solution. Condensing a complete professional broadcast studio into a compact and intuitive console, it gives you everything you need to sound spectacular, whether you're podcasting, streaming or creating any kind of content. Loaded with cutting-edge next-gen features and supercharged by a high-performance quad-core audio engine, this is all you need to produce exceptional content.

Incredible Audio, Incredibly Easy:

The RODECaster Duo is incredibly simple to navigate with its large high-definition touchscreen, tactile rotary encoder and broadcast-quality faders giving you hands-on control over every aspect of your sound. Get your project set up in seconds, and with professionally tailored presets and the intuitive VoxLab processing editor, you can dial in your perfect sound with the tap of button or twist of a knob. It's never been easier to create amazing content.

Specifications

Acoustic, video & electrical

Frequency Range
Mic Inputs: 20Hz - 20kHz

Monitor Outputs: 20Hz - 20kHz

Microphone Input Impedance: 4KO
Instrument Input Impedance: 1MO
Preamplifier Gain Range: 0 - 76dB
Equivalent Noise: -131.5dBV (A-weighted)
Line Output Maximum Level:4dBu
Headphone Output Power: 250mW
Power Requirements: USB-C PD (9V, 3A)
Analogue Audio Input Connectivity: 2 x combo jack (mic, instrument, line), 1 x 3.5 TRRS headset jack (I/O)

USB Interface 1: 1 x 2-in/14-out multichannel device, 1 x 2-in/2-out with mix-minus
USB Interface 2: 1 x 2-in/2-out with mix-minus
Bit Depth: 32 Bit (USB1), 24 Bit (USB2)

Sample Rate: 48kHz
Recording Storage: microSDHC, microSDXC, USB-C removable drive (exFAT - minimum 100MB/s)
Data Transfer: USB 3.0 SD card reader 130MB/s
Network Connectivity: WiFi 802.11g/n/ac 2.4GHz and 5GHz, Ethernet 100/100
Internal Storage (GB): 4GB (SMART pads)
OS Requirements: macOS 10.15 or later, Windows 10 Version 1803 or later, Windows 11

Mechanical

Weight (grams): 1131

Dimensions (millimetres)
Length: 235
Width: 225
Height: 76

Notes: White version of Rode's industry-standard RodeCaster II, the updated version of the best all-in-one production solution around. Stream, podcast and create content with ease.

*** Software update October 2024 ***

Introducing a massive update for the RODECaster Pro II and RODECaster Duo - virtual devices have landed!

This new feature allows users to treat their software as if it were a microphone connected to their RODECaster. This means they can assign each app to a fader and individually apply effects and processing, create custom routing and record them individually.

This update is currently available in beta, with a full public release coming soon. To access virtual devices whilst in beta, users will need to join the RODECaster Beta Program.


Supplier's Notes:
The RODECaster Pro II is the ultimate audio production solution for content creators, including streamers, podcasters and musicians. Combining revolutionary features with superior sound quality, endless customisability and unmatched ease of use, the RODECaster Pro II is all you will ever need to record incredible audio for your content.

A Completely New Beast

The RODECaster Pro II is the world's most powerful all-in-one audio production solution. Loaded with cutting-edge next-gen features and supercharged by a high-performance quad-core audio engine, it delivers next-level audio for any content creation application, including podcasting, streaming and gaming, and music production.

Revolutionary Sound

Featuring four balanced analogue inputs with high-quality Neutrik combo jacks for connecting microphones, instruments and line-level devices, the RODECaster Pro II is ideal for everything from recording a single microphone for a livestream or podcast to capturing complete multitracked music recordings.

World-class Revolution Preamps deliver pristine audio quality with any microphone or instrument. Designed from the ground up specifically for the RODECaster Pro II, these ultra-low-noise, high-gain preamps will give you plenty of output while remaining incredibly quiet, eliminating the need for microphone boosters, lifters or external processing. Sonic purity has never been more accessible.

Powered by APHEX

Craft your sound with studio-quality audio processing powered by one of the most revered names in pro audio: APHEX. On-board is a suite of authentic emulations of legendary hardware audio processors, including the Aural Exciter, Big Bottom and Compellor master compressor/leveller. There is also a studio-quality compressor, noise gate, high-pass filter, de-esser and three-band equaliser for each channel, all powered by APHEX. Sound exceptional every time you hit record.

Incredible Audio, Incredibly Easy

The RODECaster Pro II is incredibly simple to navigate using the large high-definition touchscreen and tactile rotary encoder, giving you hands-on control over every aspect of your sound. Getting set up takes seconds, and with professionally tailored presets and the intuitive VoxLab processing editor allowing you to dial your perfect sound with the tap of button or twist of a knob, taking your audio to new heights has never been easier.

Not Just Sound Pads. SMART Pads

Other consoles have sound pads. The RODECaster Pro II has SMART pads. Trigger on-the-fly voice effects like reverb, echo, pitch and robot FX, send MIDI commands to external software, activate automated mixer actions like fade ins and fade outs. And yes, fire off sound effects, music beds, samples or jingles. Unlimited creativity and control at your fingertips.

Endless Customisation. Endless Creative Freedom.

No matter what kind of content you're creating, the RODECaster Pro II can be customised to suit your recording setup, your ideal workflow, and your unique sound. The nine channels are individually assignable, allowing you to create personalised mixer configurations. Every processor and effect can be tweaked to taste on-board using the advanced editor, each SMART pad is fully programmable (with eight banks of eight pads for a total of 64 unique actions available), and the bright RGB LEDs can be customised to suit your setup and aesthetic. The possibilities are endless.

What's in the Box

1 x RODECaster Pro II - White
1 x Power Adapter
1 x USB-C to USB-C Cable

Acoustic & electrical specifications

Frequency Range: Mic Inputs: 20Hz - 20kHz
Monitor Outputs: 20Hz - 20kHz
Microphone Input Impedance: 4KO
Instrument Input Impedance: 1MO
Input Dynamic Range: 113dB
Preamplifier Gain Range: 0 - 76dB
Equivalent Noise: -131.5dBV (A-weighted)
Line Output Maximum Level: 4dBu
Headphone Output Power: 250mW
Power Requirements: 30W USB-C PD (15V, 2A)

Analogue Audio Input
Connectivity: 4 x combo jack inputs
(microphone, line, instrument)

Analogue Audio Output
Connectivity: 2 x balanced line output, 4 x headphone output
Bluetooth Connectivity: Bluetooth audio with Music and
Headset profile (wide band speech)
USB Interface 1: 1 x 2-in/16-out multichannel device,
1 x 2-in/2-out with mix-minus
USB Interface 2: Via USB: 5V

Acoustic & electrical specifications

Bit Depth: USB-C
Sample Rate: 24-bit / 32-bit floating point
Recording Storage: 48 / 96 / 192
Data transfer: APHEXr digital signal processing (only available at 48kHz sample rate)
Network connectivity: Windows 10
Mac OS 10.15
OS Requirements: Mac OS 10.15 or later, Windows 10 Version
1803 or later, Windows 11
Internal Storage: 4GB (SMART Pads)

Mechanical specifications

Weight (grams): 1960g

Dimensions (millimetres):
Length: 305mm
Width: 270mm
Height: 60mm

Notes: The RODECover Duo is a bespoke cover designed to fit perfectly over the RODECaster Duo. Made from high-grade clear polycarbonate that is extremely durable, it ensures both internal and external components of the RODECaster Duo are protected from dirt and dust.

Specifications

The RODECover Duo is a bespoke cover designed to fit perfectly over the RODECaster Duo. Made from high-grade clear polycarbonate that is extremely durable, it ensures both internal and external components of the RODECaster Duo are protected from dirt and dust.

Weight (grams): 215

Dimensions (millimetres):
Width: 235
Depth: 244
Height: 40

Compatible RODE Products: RODECaster Duo

*** Please note: the RODECaster Duo is not included, it is shown in the picture for demonstration purposes only. ***

Notes: ***B-STOCK: Original box damaged and cable is in plastic seal; product in perfect working order***

The SC16 is a high-quality USB-C to USB-C cable designed to connect RODE microphones with a USB-C output to USB-C compatible devices. Measuring 300mm long, the cable is ultra-flexible and features an in-built cable grip that is compatible with the VideoMic NTG shock mount cable management system. It is particularly suitable for connecting the VideoMic NTG to USB-C mobile devices, but will also work with any RODE device with a USB-C output, including the NT-USB Mini, Wireless GO II and RODECaster Pro.

Key Features:

High-quality shielded USB-C to USB-C patch cable
300mm (11.8") long
Junction box for cable management

Specifications

Acoustic & Electrical Specifications

Output Connection
USB Type-C
Inputs
USB Type-C

Compatible RODE Products

VideoMic NTG
NT-USB Mini
Wireless GO II
RODECaster Pro
AI-1

Mechanical Specifications

Colour: Black
Weight (g): 6
Cable Length (millimetres): 300

Box Contains: 1 x SC16

Notes: The VideoMic GO II is a compact, lightweight on-camera shotgun microphone that makes capturing incredible audio incredibly easy. It features both an analogue 3.5mm TRS output and a digital USB-C output for use with a camera, smartphone, or computer*, making it super versatile. Annular line tube technology delivers crisp, clear sound for all content creation applications, and the included windshield and innovative HELIX isolation mount ensure your recordings are crystal-clear.

Ultra-lightweight shotgun microphone (just 60g)
3.5mm TRS output for use with cameras
Digital USB-C output for use with phones, tablets and computers*
HELIX isolation mount
No batteries required
Compatible with the RODE software suite for advanced features, including RODE Connect and RODE Capture

Acoustic & electrical specifications

Acoustic Principle: Pressure gradient electret condenser
Polar Pattern: Supercardioid
Frequency Response: 20Hz - 20kHz
Output Impedance: 2K2O
Signal to Noise Ratio: 79 dBA
Equivalent Noise (A-weighted): 15 dBA
Dynamic Range: 95 dBA Typical
Sensitivity: -31dBV(28.78mV @ 94dB SPL) i 1dB @ 1kHz
Max Input SPL: 110 dB SPL
Output Connections: 3.5mm TRS
USB-C
Computer Connectivity: USB-C (USB 2.0)
Simultaneous I/O: Stereo input and output when in USB mode
Power Requirements: 3.5mm plug-in power 2 - 5V
USB 5V
Bit Depth: 24-bit
Sample Rates: 48 kHz

Minimum OS Requirement:
macOS 10.15

Windows 10 (20H2)
iOS 14
Android 9.0

Mechanical specifications

Weight (grams): VideoMic GO II: 33 VideoMic GO II and included accessories: 60

Dimensions (millimetres):

VideoMic GO II:
Length: 120
Diameter: 21.6

VideoMic GO II and included accessories:
Length: 120
Width: 50.3
Height: 52.4

Compatible RODE Accessories:: WS12, SC14, SC15, SC16, SC17, SC18, SC19, SC20, SC21, SC22, SC23, SC24, SC25, SC26

Compatible RODE Software:
RODE Connect
RODE Central
RODE Reporter
RODE Capture

Included Accessories:
1 x SC14 TRS-TRS Cable
1 x Foam Windshield
1 x HELIX Isolation Mount

Notes: The VideoMic Me-C + is a high-quality microphone for Android and iOS mobile devices with a USB-C port, designed to give you incredible audio when shooting video. The microphone's directionality reduces surrounding noises to focus on exactly what you are filming, making sure your videos sound clear and intelligible. The 3.5mm jack provides a headphone output for audio monitoring and playback.

*Not compatible with iOS devices with a Lightning port

Designed for Android and iOS mobile devices with a USB-C port
3.5mm headphone output jack for direct monitoring
Furry windshield included to help reduce wind noise
Works seamlessly with RODE Capture, RODE Reporter and other recording apps

Acoustic & electrical specifications

Acoustic Principle: Pressure gradient electret condenser
Polar Pattern: Cardioid
Frequency Range: 20Hz - 20kHz
Equivalent Noise: 19.5 dBA SPL (as per IEC651)
Maximum SPL: 115dB SPL (1Hz @ 1m)
Power Requirements: 5VDC-100mA (bus-powered)
Analog Outputs: 3.5mm TRS headphone
Device Connectivity: USB Type-C
Bit Depth: 24-bit
Signal-to-Noise Ratio: 74.5 dB
Sample Rates: 44.1 and 48kHz
OS Requirements: iOS 17 or higher
Android 12 or higher

Mechanical specifications

Weight (grams): 27

Dimensions (millimetres):
Length: 74
Width: 20
Height: 28

What's in the box

VideoMic Me-C+
Mounting Clip
WS9

Notes: ***B-STOCK: Box damaged, product in perfect working order***


The VideoMic Me-L is a Lightning connector equipped high-quality directional microphone with a compact and lightweight body designed for Apple iOS devices. Its Lightning connector plugs directly into the device, utilising the device's internal power for instant plug-and-play - no batteries necessary. A standard 3.5mm headphone jack on the rear allows audio play-through in real-time and effortless audio playback.

The VideoMic Me-L is made from durable aluminium and coated in a military-grade ceramic finish, providing a hardwearing chassis that's resistant to scratching. It's a build quality far and away from the competition, reflected in superior sound. The microphone also comes packaged with a deluxe furry windshield for shooting outdoors and in adverse weather.

The VideoMic Me-L is suitable for vloggers, musicians and any iPhone users seeking to drastically improve their iOS device's quality of sound.

Notes: The Charge Case+ is a compact case for the Wireless GO (Gen 3) that keeps the entire system safe and secure when storing or taking it out on the road.

It features an integrated battery that delivers two full recharges for up to 21 hours of use and allows simultaneous data access to the complete system for Transferring recordings, adjusting settings and updating firmware.

Top Up and Transfer

The Charge Case+ provides a tidy solution for charging all three of your Wireless GO (Gen 3) units with a single USB-C cable, and thanks to its built-in battery, you can keep topping your units up while on the go as well with an extra two recharges on-board (21 hours total). You can also use the Charge Case+ to access the on-board recordings and update firmware for all of your units simultaneously.

Snug, Safe and Secure

With its tough exterior combined with an innovative zipping design, the Charge Case+ is perfect for keeping all three of your Wireless GO (Gen 3) units protected from knocks and bumps while on the road. Not only will your transmitters and receivers be recharging between jobs, but they will all be kept safe, secure and together.

Specifications

Electrical

Battery Capacity: 4200 mAH
Power Requirements: 5V/3A
Charging Time: Approx. 2 hours
Charge Current: 3A (max)
Configuration: 1 x RX, 2 x RX

Input: USB-C
Data Transfer: Yes

Mechanical:
Weight (grams)
185g (case only), 280 (with Wireless GO (Gen 3))
Dimensions (millimetres): 71 (H) x 98 (W) x 78 (D)

What's in the box:

1 x Charge Case+

Notes: Rode's wireless mic system gets updated and improved. Designed with 32-bit float recording and automatic gain setting, the Wireless Go takes the hard work out of setting levels, giving great results every time.

RODE offers a 5-year warranty on this product.

This warranty will function just like any other RODE product warranty and the claim process remains unchanged - as long as the customer purchased an eligible product from an authorised dealer and can present proof of purchase, they can make a warranty claim within 5 years of the date of purchase.

The Wireless GO is a powerful compact wireless microphone system ideal for a wide range of content creation applications. It offers a plethora of features for capturing pristine audio in any situation, including intelligent GainAssist technology and 32-bit float on-board recording with 32 GB of internal memory.

RODE's state-of-the-art Series IV 2.4GHz digital transmission delivers best-inclass range, with broadcast-grade in-built microphones for crystal-clear audio capture. It is universally compatible with cameras, phones and computers, and for even more flexibility features locking lavalier connectors, dedicated buttons for triggering recording, auto-power on/off, and a TRRS jack on
the receiver for headphone monitoring or audio input

Notes: Record professional sound for your videos with the Wireless ME microphone system. Simply clip it onto your talent to be recording crystal-clear wireless audio in seconds. Works with cameras, computers and smartphones, and is compatible with all social media apps, including Instagram and TikTok. Also compatible with free RODE video and audio apps, including the RODE Capture iOS camera app for dual-camera video recording. Features microphones built into both the transmitters and receiver for recording everything from two-way interviews to reaction videos, with GainAssist technology ensuring your audio is perfect every time.

Acoustic & electrical specifications

Acoustic Principle: Pre-polarised pressure transducer
Polar Pattern: Omnidirectional
Frequency Range: 20 Hz - 20 kHz
Dynamic Range: 100dB
Max SPL: 122dB SPL
Equivalent Noise (dBA): 22dBA
Analogue Inputs: TRS (lavalier microphone Input)
Output Connection: 3.5mm TRS
USB-C
Computer Connectivity: USB-C
Bit Depth: 24-bit
Sample Rate: 48 kHz
Minimum Operating Systems Requirements: macOS 10.15 above, Windows 10 and above, iOS 14, Android 11
Power Requirements: In-built rechargeable lithium-ion battery
charged via 5V USB
Operating Time: 7 hours
Transmission Range: >100m (line of sight) 3-WAY

Interview
Simple to use
Dual-channel system with two transmitters and one receiver
GainAssist technology for crystal-clear audio
Built-in microphones - no additional accessories required
Works with cameras, computers and smartphones (iOS and Android)
Compatible with free RODE video and audio apps


Mechanical specifications

Weight (grams): TX 32 RX 32
Dimensions (millimetres): TX: 44mm x 45.3mm x 18.3mm
RX: 44mm x 45.3mm x 18.3mm
Included Accessories:
2 x Transmitters
1 x Receiver
1 x SC21 USB-C to Lightning Cable
2 x SC22 USB-C to USB-C Cable
1 x SC2 3.5mm TRS to TRS cable
1 x SC7 3.5mm TRRS to TRS cable
3 x Fur windshield
1 x Carry Pouch
RODE Software Compatibility:
RODE Central
RODE Connect
RODE Reporter
RODE Capture

What's in the box

2 x TX
RX
SC21
2 x SC22
3 x Furry
SC2
SC7
Carry Pouch

Dimensions: 45.3mm x 44mm

Notes: The Wireless Micro is a pocket-sized solution for capturing pristine audio with your smartphone. It connects directly to your phone with no cables required and features two clip-on transmitters with in-built microphones, so you can get recording in seconds.

Intelligent GainAssist technology will ensure your audio is perfect in any environment and with up to 18 hours of battery life using the included charging case, it is the ideal grab-and-go microphone for smartphone content creation.

Box Contains: 1 x Receiver (RX), 2 x Transmitters (TX), 1 x Charge Case, 2 x Furry Windshields, 1 x SC22 USB-C to USB-C Cable, 2 x Magnetic Attachments

RODE offers a 5-year warranty on this product.

This warranty will function just like any other RODE product warranty and the claim process remains unchanged - as long as the customer purchased an eligible product from an authorised dealer and can present proof of purchase, they can make a warranty claim within 5 years of the date of purchase.

Notes: The Wireless Micro is a pocket-sized solution for capturing pristine audio with your smartphone. It connects directly to your phone with no cables required and features two clip-on transmitters with in-built microphones, so you can get recording in seconds.

Intelligent GainAssist technology will ensure your audio is perfect in any environment and with up to 18 hours of battery life using the included charging case, it is the ideal grab-and-go microphone for smartphone content creation.

Box Contains: 1 x Receiver (RX), 2 x Transmitters (TX), 1 x Charge Case, 2 x Furry Windshields, 1 x SC22 USB-C to USB-C Cable, 2 x Magnetic Attachments

RODE offers a 5-year warranty on this product.

This warranty will function just like any other RODE product warranty and the claim process remains unchanged - as long as the customer purchased an eligible product from an authorised dealer and can present proof of purchase, they can make a warranty claim within 5 years of the date of purchase.

Notes: The Wireless Micro is a pocket-sized solution for capturing pristine audio with your smartphone. It connects directly to your phone with no cables required and features two clip-on transmitters with in-built microphones, so you can get recording in seconds.

Intelligent GainAssist technology will ensure your audio is perfect in any environment and with up to 18 hours of battery life using the included charging case, it is the ideal grab-and-go microphone for smartphone content creation.

Box Contains: 1 x Receiver (RX), 2 x Transmitters (TX), 1 x Charge Case, 2 x Furry Windshields, 1 x SC22 USB-C to USB-C Cable, 2 x Magnetic Attachments

RODE offers a 5-year warranty on this product.

This warranty will function just like any other RODE product warranty and the claim process remains unchanged - as long as the customer purchased an eligible product from an authorised dealer and can present proof of purchase, they can make a warranty claim within 5 years of the date of purchase.

Notes: The WS14 is a deluxe pop filter purpose-built to minimise plosives when used in conjunction with your PodMic or PodMic USB, helping you capture crystal-clear audio for your content. It features a low-profile design to remain discreet on-camera and is constructed from high-density foam with supporting ribs to ensure it maintains its shape. Available in a range of colours, including orange, purple, green, blue, red, pink, black and white.

Weight (grams): 34

Dimensions (millimetres):
Length: 122
Diameter: 72
Compatible Microphones: PodMic, PodMic USB

Notes: The WS14 is a deluxe pop filter purpose-built to minimise plosives when used in conjunction with your PodMic or PodMic USB, helping you capture crystal-clear audio for your content. It features a low-profile design to remain discreet on-camera and is constructed from high-density foam with supporting ribs to ensure it maintains its shape. Available in a range of colours, including orange, purple, green, blue, red, pink, black and white.

Weight (grams): 34

Dimensions (millimetres):
Length: 122
Diameter: 72
Compatible Microphones: PodMic, PodMic USB

Notes: The WS14 is a deluxe pop filter purpose-built to minimise plosives when used in conjunction with your PodMic or PodMic USB, helping you capture crystal-clear audio for your content. It features a low-profile design to remain discreet on-camera and is constructed from high-density foam with supporting ribs to ensure it maintains its shape. Available in a range of colours, including orange, purple, green, blue, red, pink, black and white.

Weight (grams): 34

Dimensions (millimetres):
Length: 122
Diameter: 72
Compatible Microphones: PodMic, PodMic USB

Notes: The WS14 is a deluxe pop filter purpose-built to minimise plosives when used in conjunction with your PodMic or PodMic USB, helping you capture crystal-clear audio for your content. It features a low-profile design to remain discreet on-camera and is constructed from high-density foam with supporting ribs to ensure it maintains its shape. Available in a range of colours, including orange, purple, green, blue, red, pink, black and white.

Weight (grams): 34

Dimensions (millimetres):
Length: 122
Diameter: 72
Compatible Microphones: PodMic, PodMic USB

Notes: The WS14 is a deluxe pop filter purpose-built to minimise plosives when used in conjunction with your PodMic or PodMic USB, helping you capture crystal-clear audio for your content. It features a low-profile design to remain discreet on-camera and is constructed from high-density foam with supporting ribs to ensure it maintains its shape. Available in a range of colours, including orange, purple, green, blue, red, pink, black and white.

Weight (grams): 34

Dimensions (millimetres):
Length: 122
Diameter: 72
Compatible Microphones: PodMic, PodMic USB