100% Compra Segura

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Compra Segura

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Tangible Waves

View:
Options
Artículos del 1 al 50 de 52 en la página 1 de 2
1  2  »
FORTHCOMING
Tangible Waves AE Modular 1 Row Rack Empty Case
Cat: 719708
 
Empty rack for AE modular, 16U
Notes: The 1-row rack for AE modular is 16 units wide; two of them are used by the MASTER module so you have 14U remaining for other modules.

Via a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.

Dimensions:41.3 x 11.2 x 4.5 cm (width x depth x height)
Read more
coming soon $28.23
FORTHCOMING
Tangible Waves AE Modular 10 x Patchwires (10cm)
Cat: 719704
 
Pack of 10 patch wires
Notes: A set of 10 Patchwires for AE modular; with a length of 10cm.
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 10 x Patchwires (17cm)
Cat: 719721
 
Pack of 10 patch wires
Notes: A set of 10 Patchwires for AE modular; with a length of 17cm.
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 10 x Patchwires (25cm)
Cat: 719705
 
Pack of 10 patch wires
Notes: A set of 10 Patchwires for AE modular; with a length of 25cm.
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 10 x Patchwires (40cm)
Cat: 719706
 
Pack of 10 patch wires
Notes: A set of 10 Patchwires for AE modular; with a length of 40cm.
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 10 x Patchwires (50cm)
Cat: 719707
 
Pack of 10 patch wires
Notes: A set of 10 Patchwires for AE modular; with a length of 50cm.
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 12U Eurorack Adapter Frame
Cat: 719730
 
AE modular Eurorack adapter frame
Notes: The AE modular Eurorack adapter frame allows to integrate AE modular modules into Eurorack systems. It is basically an empty Eurorack-sized frame that can take up to 12 units of AE modules where two units are occupied by the mandatory MASTER module. Via the MASTER module the frame is powered from the Eurorack bus.

The product includes:

- The mounting frame with screws for mounting the AE modules
- The ribbon cable for Eurorack bus connection
- The bus cable
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 16U Eurorack Adapter Frame
Cat: 719731
 
AE modular Eurorack adapter frame
Notes: The AE modular Eurorack adapter frame allows to integrate AE modular modules into Eurorack systems. It is basically an empty Eurorack-sized frame that can take up to 16 units of AE modules where two units are occupied by the mandatory MASTER module. Via the MASTER module the frame is powered from the Eurorack bus.

The product includes:

- The mounting frame with screws for mounting the AE modules
- The ribbon cable for Eurorack bus connection
- The bus cable
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 1U Blank Module
Cat: 719722
 
Blank module for AE modular - 1U
Notes: If your rack isn't filled completely with modules, use this blank module to fill the spaces.
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 2 Row Rack Empty Case
Cat: 719709
 
Empty rack for AE modular, 2 x 16U
Notes: The 2-row rack for AE modular is 16 units wide with 2 rows; the MASTER module consumes 2 units so you have 30U remaining for other modules.

Via a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.

Dimensions: 41.3 x 21.7 x 4.5 cm (width x depth x height)
Read more
coming soon $42.20
FORTHCOMING
Tangible Waves AE Modular 2ATT/CV Dual Audio & CV Level Attenuator Module
Cat: 719663
 
Dual audio & CV level attenuator
Notes: 2ATT/CV contains two units of a simple level attenuator for any kind of signal. You can also switch to voltage mode and get manually controllable CV on the outputs.
Read more
coming soon $34.56
FORTHCOMING
Tangible Waves AE Modular 2ENV Dual Attack & Decay Envelope Module
Cat: 719670
 
Dual attack/decay envelope
Notes: 2ENV is a dual attack - decay envelope; it can be switched between full sustain (the output remains at full level as long as the GATE input is on) and zero sustain (for percussive envelopes). Another switch (SLOW/FAST) allows selecting the time range.

For manual triggering there is a button for each envelope.

CV control: Both attack and decay time can be CV controlled; the CV "multiplies" the time by 1...approx. 8 times.
Read more
coming soon $42.20
FORTHCOMING
Tangible Waves AE Modular 2OSC V2 Dual Oscillator Module
Cat: 719691
 
Dual oscillator
Notes: The 2OSC module contains two oscillators; each of them features:

- One frequency knob
- CV input (1V/octave)
- PWM input
- SYNC input
- Square/Saw/Narrow pulse (sync) output

The first oscillator additionally has a pulsewidth knob; the second oscillator can be pulsewidth-modulated by the PWM input.

The 1V/octave characteristic and stability in this module is a bit less than in the VCO module; but on the other hand you get two oscillators in one small module!
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 2OSC/d Dual Hybrid Oscillator Module
Cat: 719701
 
Dual hybrid oscillator
Notes: The 2OSC/d module contains two 1V/octave hybrid oscillators. Each of them features:

- One frequency knob plus a range switch +2 octaves
- CV input (1V / octave)
- PWM input
- SYNC input
- Sawtooth/Square/Sub-octave output

The pulsewith knob controls either the pulsewidth of the first oscillator (with the second one having a fixed pulsewidth), or via a switch the second oscillator is also controlled by the pulsewidth knob. Both oscillators can be pulsewidth-modulated independently by their PWM inputs.

The module is designed as a hybrid digital/analogue module; the oscillator frequencies are determined digitally and are therefore quite stable and have a good tracking; the output wavefom itself is created analogue. It's a new idea/concept that I have implemented here; the design causes the waveform to get a bit gritty at higher frequencies (but not "digital noise") - it's the character of this thing!
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 2S&H Sample & Hold Module
Cat: 719665
 
Sample & Hold module
Notes: The purpose of the SAMPLE&HOLD module is to "freeze" the input voltage with a trigger input.

Typically used for random CV patterns if a noise signal is fed to the input and triggered e.g. by an LFO.
Read more
coming soon $34.56
FORTHCOMING
Tangible Waves AE Modular 2SIGNALAMP Dual Audio Signal Amplifier Module
Cat: 719699
 
Amplifier for audio signals
Notes: 2SIGNALAMP contains two amplifier stages for audio signals; the amplification can be adjusted up to 15:1.

A clip LED indicates that the amplified level exceeds the usual range of AE modular and is short before clipping.

Main purpose of this module is to boost external audio signals for further processing within AE modular, or also the triangle output of the VCO which has by design a lower signal amplitude.
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 2U Blank Module
Cat: 719725
 
Blank module for AE modular - 2U
Notes: If your rack isn't filled completely with modules, use this blank module to fill the spaces.
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 2VCA Dual VCA Module
Cat: 719668
 
Dual voltage controlled amplifier module
Notes: 2VCA contains two separate VCA (voltage controlled amplifiers); the classic module to shape the volume of a sound that is fed to IN by a control voltage, e.g. from an ENV to the CV input.

A switch determines the operation mode (DC/CV or audio), choosing the right position can reduce/avoid pop's with short attack envelopes.

An additional knob for each VCA attenuates the level, if necessary.
Read more
coming soon $26.91
FORTHCOMING
Tangible Waves AE Modular 3VCSWITCH Multi Purpose Electronic Switch Module
Cat: 719697
 
Three multi-purpose electronic switches
Notes: 3VCSWITCH contains three electronic toggle switches that can be operated either manual (latched or momentary by two buttons) or by an external gate signal. The connection by the switch is bidirectional and can be used for any kind of signal within AE modular, e.g. for dynamic signal routing/selection of modulation sources.
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 4ATTMIX Mixer & Quadattenuator Module
Cat: 719689
 
Versatile mixer/quadattenuator
Notes: 4ATTMIX offers four input channels which can be level controlled / attenuated by the corresponding knobs. The attenuated signals are sent to four outputs.

Additionally, each channel can be sent to an internal mixer by the switches beside the knobs. The mix signal is then sent to the mix output.

An additional switch selects the general operation mode for the mixer, for DC/CV signals or for audio signals.
Read more
coming soon $31.64
FORTHCOMING
Tangible Waves AE Modular 4I/O Four Minijack Inputs & Outputs Module
Cat: 719687
 
4 minijack inputs/outputs
Notes: 4I/O offers four minijack sockets that are connected to the AE sockets for connecting external audio sources, CV's and Eurorack modules. Sockets 1 and 3 are stereo sockets; if a stereo cable is inserted here the signal is available on sockets 1/2 and 3/4. With mono cables the four sockets can be used independently.

All sockets have an overvoltage protection (as AE modular is limited to 5V) and can be switched between audio and DC/CV signals.
Read more
coming soon $34.56
FORTHCOMING
Tangible Waves AE Modular 4U Blank Module
Cat: 719726
 
Blank module for AE modular - 4U
Notes: If your rack isn't filled completely with modules, use this blank module to fill the spaces.
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 8U Eurorack Adapter Frame
Cat: 719727
 
AE modular Eurorack adapter frame
Notes: The AE modular Eurorack adapter frame allows to integrate AE modular modules into Eurorack systems. It is basically an empty Eurorack-sized frame that can take up to 8 units of AE modules where two units are occupied by the mandatory MASTER module. Via the MASTER module the frame is powered from the Eurorack bus.

The product includes:

- The mounting frame with screws for mounting the AE modules
- The ribbon cable for Eurorack bus connection
- The bus cable
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 9V Power Supply Adapter (1.3A)
Cat: 719715
 
Power supply for AE modular
Notes: This power supply adapter is suitable for AE modular and other devices. The maximum current of 1.3A is enough to feed several AE modular racks in parallel.
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular BEAT DIVIDER Clock Divider Module
Cat: 719673
 
Clock divider module
Notes: The BEAT DIVIDER takes a clock signal (the BUS CLK which presents the MIDI clock from the MASTER module) and divides it to musical clock dividers, selectable from 1/2... 1/32.

Additionally, a second output provides the dotted or triplet clock of the selected divider value.
Read more
coming soon $25.06
FORTHCOMING
Tangible Waves AE Modular DELAY Lofi Type Mono Delay Module
Cat: 719659
 
Mono delay module
Notes: This module is a standard mono delay with the usual parameters:

- Delay time
- Feedback
- Dry/wet mix

It sounds not as clean and polished as a usual digital delay but has quite a character on its own. High feedback settings allow endless and distorting loops.

(For the techies: It is based on the well-known PT2399 chip.)
Read more
coming soon $34.56
FORTHCOMING
Tangible Waves AE Modular DIVIDER Binary Divider Module
Cat: 719661
 
Binary divider for incoming signals
Notes: A binary divider for incoming signals. It can be used either for dividing clock signals (e.g. from an LFO, BEATDIVIDER) by 2 / 4 / 8... 128 for rhythmical purposes but also for audio signals - in this case you get subharmonics/lower octaves squarewaves at the outputs, which can be mixed or used separately.

The reset input resets all output signals; in case of audio signals this can get quite unique, ringmodulator-like sounds.
Read more
coming soon $34.56
FORTHCOMING
Tangible Waves AE Modular FILTER Wasp Type Filter Module
Notes: This filter module is a variant of the Wasp filter, a quite strange circuit used first in the EDP Wasp synth end of the seventies, which abuses digital chips in an analogue way leading to the characteristic sound of this filter type. In this module, vactrols are used for controlling the filter frequency.
Read more
coming soon $35.87
FORTHCOMING
Tangible Waves AE Modular HPAMP Stereo Headphone Amplifier Module
Cat: 719658
 
Stereo headphone amplifier
Notes: A stereo headphone amplifier for AE modular.

It has separate left/right inputs; via a switch it can be set to mono operation (only left input is used). One common volume control for both outputs.

Two headphones can be attached via 3.5mm stereo minijack sockets.
Read more
coming soon $34.81
FORTHCOMING
Tangible Waves AE Modular LFO Module
Cat: 719694
 
LFO module
Notes: The LFO module generates modulation voltages mostly below the audio range; this module offers:

- PWM modulation for the Pulse out
- RATE knob for controlling the frequency
- SLOW/FAST switch for two frequency ranges; with FAST the rate can go into the lower audio range
- Triangle/Sawtooth switch; changes the waveform of the output
- PULSEWIDTH knob, this sets the pulsewidth of the according output
- Control LED for sawtooth/triangle and for pulse
- Three separate output signals: Square (even duty cycle), TRIANGLE/Sawtooth, Pulse
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular LOGIC Dual NAND, AND, XOR Inverter Module
Cat: 719682
 
Dual NAND, AND, XOR inverter
Notes: The LOGIC module combines two inputs by different logical rules (AND, NAND, XOR). This can be used either for operations on trigger/gate signals (let gate signals pass depending on other signals, invert them depending on the other input etc.), or for audio signals, where you get ringmodulator-like sounds when feeding two different oscillator frequencies.
Read more
coming soon $22.69
FORTHCOMING
Tangible Waves AE Modular LOPAG Vactrol Lowpass Gate Module
Cat: 719685
 
Lowpass gate module for AE modular
Notes: The LOPAG is the lowpass gate module for AE. It is based on a Vactrol (like all good lowpass gates) and has two inputs: IN (audio signal) and TRIG. A pulse on the TRIG input opens the signal path shortly and via the characteristics of the Vactrol the audio signal is filtered and attenuated in a plucked, percussive way. Additional GATE and CV inputs allow more control over the way the module works.
Read more
coming soon $33.24
FORTHCOMING
Tangible Waves AE Modular Master I/O Module
Cat: 719648
 
Master I/O module
Notes: The MASTER module is the base of every AE modular system - it contains;

- The voltage regulation (5V) for the power supply of the modules
- MIDI input (minijack; Breakout cable to DIN-5 socket is available separately)
- In/out-sockets (3.5mm minijack) for audio out and/or interfacing with a Eurorack system
- All bus signals (CV, GATE, CTRL, MIDI clock/start/stop) as patch sockets

The power supply is a 9V DC adapter; it can be connected either at the side or on the top of the module.
Read more
coming soon $52.75
FORTHCOMING
Tangible Waves AE Modular MIDI Breakout Cable
Cat: 719720
 
MIDI breakout cable for AE modular
Notes: The MIDI Breakout Cable is an adapter from the "classic" DIN-5 MIDI Socket to a stereo 3.5mm minijack plug, which is used as MIDI in on AE modular.
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular MIXER 4-4 Quad Mixer Module
Cat: 719678
 
Audio mixer with 4 inputs
Notes: This module consists of an audio mixer with 4 inputs and their level knobs, plus an additional 4 separate inputs that are mixed at full level (especially for mixing CV signals), and a separate output.
Read more
coming soon $25.06
FORTHCOMING
Tangible Waves AE Modular MULTIFX Stereo Digital FX Module
Cat: 719655
 
High quality stereo digital FX for AE modular
Notes: The MULTIFX module offers 15 different stereo audio FX programs, a wide variety from common FX like reverb and delay to unique effects like Ring Crusher or Glitch delay. Also a nice shimmer effect is onboard.

Each program has 3 parameters that can be adjusted and additionally be CV-controlled.

With a switch the sample rate can be reduced to half the normal rate, resulting in doubling the effect times (with reverb, delay...) and introducing a nice portion of aliasing.

It is based on the FV-1 DSP chip that is well-known from other FX-modules in the Eurorack world; the MULTIFX module offers the 7 factory programs of the chip plus 8 new and unique ones created by Tangible Waves.
Read more
coming soon $105.51
FORTHCOMING
Tangible Waves AE Modular NOISE Analogue & Digital Noise Module
Notes: Analogue & Digital Noise Module.

- The A output generates analogue noise (technically, a fluctuating voltage between about 1...4V)
- The D output generates digital noise, which is a random changing 0V / 5V

The RATE knob controls the colour of the noise, which goes from almost white noise on A output and knob fully clockwise to a rather harsh and digital sound on D output and RATE counter-clockwise.
Read more
coming soon $23.74
FORTHCOMING
Tangible Waves AE Modular NYLE FILTER Steiner Type Filter Module
Cat: 719683
 
Steiner filter for AE modular
Notes: The NYLE FILTER is an adaption of the Steiner Filter for the AE modular palette. It contains the classic filter curves lowpass/highpass/bandpass with adjustable filter frequency and resonance. The unique feature of this filter type is, that there are separate inputs for lowpass/highpass/bandpass (not separate outputs as with other filters). This allows quite unusual sounds, if different signals are fed into the different inputs.

Each input has its own attenuator; for frequency CV control there are two inputs with individual attenuators. Additionally, the resonance can also be CV controlled!

The sound goes from quite soft filtering with low resonance setting to a quite intense resonance peak to full self-resonance.
Read more
coming soon $51.69
FORTHCOMING
Tangible Waves AE Modular Power Extender Cable
Cat: 719718
 
Extender cable for AE modular
Notes: This extender cable is useful if you use the power splitter cable; the length of 1m allows it to arrange your devices as you like and still have them powered by one single power supply.

Length: 1m

Plugs: 5.5 x 2.1 mm female / 5.5 x 2.1 mm male
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular Power Splitter Cable
Cat: 719717
 
Power splitter cable for AE modular
Notes: The Power Splitter Cable allows it to power up to four devices with one Power supply adapter. The PSU you find here has enough capacity to run up to four AE modular racks (or other devices with 9V supply voltage). Please make sure the total current consumption is below 1.3 amperes!

Recommended if you use extender cables, as the four cables of this splitter are only 20cm in length each.
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular RACKLINK 2 x Module Kit (connect 2 AE cases using RACKLINK)
Cat: 719690
 
2 x Eurorack modules + cable
Notes: Connect two AE cases with RACKLINK!

The RACKLINK is a module for connecting two AE cases; the kit contains of 2 identical modules and a connector cable (length 50 cm). The modules are placed in both cases and are connected by the cable.

By this, you get the following:

The second case is powered by the first one

All bus lines (CV, GATE, CONTROL, MIDI clock/start/stop) are connected to the second case

Additionally, there are 8 connections that can be freely used; so it is not necessary to have connections between two cases. E.g. the second rack can run a patch for a drone sound, the output is then sent via Racklink line 1 to the first rack and here patched to a mixer, via line 2 the second rack can receive a modulation signal from the first one. The lines are bi-directional!
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular SEQ16 Analogue 16 Step CV Sequencer Module
Cat: 719650
 
Analogue 16-step CV sequencer
Notes: The SEQ16 is a 16-step sequencer for controlling oscillator pitch and triggering envelopes.

Compared to "classic" analogue sequencers it works a bit different: Instead of setting the CV for each step independently (which means in fact "tuning" each step which can be a bit tedious), the SEQ16 has 5 knobs for pre-setting different CV's (= notes); each of the 16 step knobs selects one of these CVs, plus 0V (=base note) plus Pause (no trigger output). So some CVs have to be fine-tuned once; with the step knobs you can focus entirely on the sequence itself and you can even modify it on the fly, still remaining in tune.

An additional feature is "accent"; this can be set for each step by turning the knob fully clockwise. If a step is set to "accent", a separate trigger output is set and also a gate repeat for the regular gate output can be selected (from one to eight repeats).
Read more
coming soon $81.24
FORTHCOMING
Tangible Waves AE Modular Spring Reverb Module (module only - spring tank not included)
Notes: Unique, vintage reverb sound.

The SPRINGREVERB module brings the unique sound of this quite old (introduced in the 60's) technique for creating reverbs to the AE modular.

IMPORTANT NOTE: This is only the module without spring tank and connection cable; with this module alone, you get no reverb. This is for users who want to use their own spring tanks.
Read more
coming soon $36.92
FORTHCOMING
Tangible Waves AE Modular Starter Rack 1 Complete Modular Synthesiser System
Cat: 719645
 
Modular synthesiser starter rack
Notes: A complete AE modular system in a one-row Rack; containing the following modules:

- MASTER
- 2 OSC/D
- VCO
- NOISE
- LFO
- SVFILTER
- ENV
- 2VCA
- 2ATT/CV
- MIXER
- SAMPLE&HOLD
- DELAY

The case is extendable; via a joint kit (not included) another case of this width can be attached at a free angle; the bus is connected via a short connector cable between both cases.

It is shipped complete with power supply unit, MIDI breakout cable, a bunch of patch wires of every type and a quick start guide.

Dimensions: 41.3 x 11.3 x 4.5 cm (width x depth x height)
Read more
coming soon $369.30
FORTHCOMING
Tangible Waves AE Modular Starter Rack 2 Complete Modular Synthesiser System
Cat: 719647
 
Modular synthesiser starter rack
Notes: A complete AE modular system in a two-row Rack (32 AE module units in complete); containing the following modules:

- MASTER
- 2OSC/D
- VCO
- NOISE
- 2 x LFO
- FILTER (Wasp type)
- SVFILTER
- 2ENV
- 2VCA
- LOGIC
- SAMPLE&HOLD
- BEATDIVIDER
- TRIQ164
- 2ATT/CV
- MIXER
- DELAY

The case is extendable; via a joint kit (not included) another case of this type can be attached at a free angle; the bus is connected via a short connector cable.

It is shipped complete with power supply unit, MIDI breakout cable, a bunch of patch wires of every type and a quick start guide.

Dimensions: 41.3 x 21.7 x 4.5 cm (width x depth x height)
Read more
coming soon $490.64
FORTHCOMING
Tangible Waves AE Modular SVFILTER State Variable Filter Module
Cat: 719656
 
State variable filter
Notes: ThisThis filter module is a classic state variable filter.

It offers the control knobs cut-off frequency, resonance and CV attenuator; two signal inputs for different signal levels control the "drive" of the module. Compared to the wasp filter this filter has a significant self-resonance and also a very quick response to cut-off frequency changes.

Three different outputs provide lowpass, bandpass and high-pass output.
Read more
coming soon $34.81
FORTHCOMING
Tangible Waves AE Modular TRIQ164 Trigger Sequencer Module
Cat: 719652
 
4-track, 16-step trigger sequencer
Notes: TRIQ164 is a 4-track, 16-step trigger sequencer.

Four track buttons select the track to be edited; with 16 buttons each step of the track can be activated an is then displayed by an LED.

For each step in each track a "repeat" can be activated, resulting in repeated triggers within one step. The number of repeats can be selected from one to eight by the REPEAT knob. Additionally, the repeat count can be CV controlled by the REPEAT CV input.

The inputs MUTE 1/2 allow to mute the outputs 1 and 2 by an external signal (e.g. for muting a kick drum)

Each of the 16 steps has a separate trigger output for additional control for certain steps or limiting the sequence length by connecting one of the outputs to the RESET input.

Use it for any kind of rhythmical patterns, typically for triggering drum sounds or envelope generator!

No, it has no pattern load/save features; this will be part of a future, much more complex sequencer. TRIQ164 is designed as improved replacement for the STEP10.

Width: 2U
Read more
coming soon $52.75
FORTHCOMING
Tangible Waves AE Modular Type 1 Bus Cable
Cat: 719711
 
Bus cable for AE modular
Notes: The Bus Cable connects the AE modular modules, it contains the power supply (GND, +5V) and CV, Gate, Controller, MIDI-clock/start/stop in a 10-pin ribbon cable. The folding pattern makes it possible to mount/unmount the module connected to the cable.

It has 16 sockets; one for connecting to the MASTER module and 15 for all other modules.

PLEASE NOTE: Type 1 is for a 1-row rack or the upper part of a 2-row rack (the row where the MASTER module is).
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular Type 2 Bus Cable
Cat: 719713
 
Bus cable for AE modular
Notes: The Bus Cable connects the AE modular modules, it contains the power supply (GND, +5V) and CV, Gate, Controller, MIDI-clock/start/stop in a 10-pin ribbon cable. The folding pattern makes it possible to mount/unmount the module connected to the cable.

It has 17 sockets; one for connecting to the MASTER module and 16 for all other modules.

PLEASE NOTE: Type 2 is for the lower part of a 2-row rack (the row below the MASTER module).
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular USBPOWER Triple USB Power Output Socket Module
Cat: 719700
 
Three USB power output sockets
Notes: Each of the three USB-A sockets on the USBPOWER module can be used to charge your mobile phone, connect a USB lamp or supply power to any other USB device. Furthermore, the output socket provides +5V and ground to supply e.g. DIY circuits on a breadboard.

Please note: This is only a power source via USB sockets; no USB data communication is possible here.

Includes additional USB lamp!
Read more
coming soon TBA
Artículos del 1 al 50 de 52 en la página 1 de 2
1  2  »

Filter

Tangible Waves
Release Date
Featured
Close