Back catalogue: All genres

Notes: Dedicated transmitter which enables SonicLink connection.

The dedicated transmitter HP-TX01 instantly transfers sound to the HDJ-F10 via ultra-low latency wireless communication with simply connecting to DJ mixer. Any DJ mixer equipped with a PHONE or 3.5 mm stereo mini jack monitor output can be used with the HDJ-F10. It is compact, lightweight, and easy to carry with your gear.

*The HP-TX01 does not support a wireless connection with the WAVE-EIGHT portable wireless DJ speaker.

Notes: Great sound you can count on

The Austrian Audio OD303 dynamic stage mic offers effortless sound quality and rugged reliability, for great sound you can count on.

The well-balanced, open, but at the same time powerful sound is unparalleled at this price point.

With its rugged construction, the OD303 will withstand daily use in the rehearsal room and the rigors of a hard touring life without problem. The die-cast housing is almost indestructible and the microphone fits perfectly in the hand.

Technical Specifications

Directional characteristic: Supercardiod
Frequency range: 35Hz - 16kHz
Sensitivity: 1.8 mV/Pa
Pop noise protection: 3D Pop Noise Diffuser
Impedance: 1200 O (symmetrical)
Load impedance: > 1 kO
Main connector: XLR 3 pin
Dimensions: 194 x 53 x 53mm
Weight: 330g

Notes: Fully featured audio mixer with 4 mono input channels, a stereo line input, stereo Aux input and a further minijack stereo input. Each mono mic/line channel has a combo XLR/jack input with +48V phantom power switchable in pairs for the XLR inputs. Each mic/line channel has a Gain control for matching the input source and a low-cut switch to filter out rumble or handling noise from microphones. Each mono channel also has High/Mid/Low EQ controls, Aux out level, FX level and Pan control. The onboard foot-switchable DSP effects engine has 99 presets for delay, reverb and modulation effects, each of which can be adjusted using two parameter controls. An onboard Bluetooth receiver has an illuminated pairing button and independent volume control. The USB type-A port on the top panel is for playback of audio files or can be used to record the main outputs to a USB storage device or as an external audio device when connected to a laptop. Main output is served by left & right XLR, in addition to 6.3mm monitor and headphone outputs and the Aux send & stereo return loop. The CMB-series offers large console features in a more manageable format for live performers and project studio recordists.

DSP effect section with 99 adjustable presets
USB mp3 audio player/recorder
Bluetooth receiver with independent volume control
PC/Mac audio device and aux power via USB A connection
3-band EQ per channel
Independent Aux send + stereo return
Switchable +48V phantom power
Balanced XLR/Jack mono inputs
USB type-C power supply

Power supply: 5Vdc 2A min. (USB-C adaptor included)
Power consumption: max.10W
Effects: 99 program DSP (2 parameter controls)
Inputs: 4 x combo XLR/jack, stereo L+R 6.3mm, stereo RCA + stereo 3.5mm
Audio source: Bluetooth receiver, USB mp3 player/recorder
Bluetooth version: 5.1 (+BR+EDR+BLE)
EQ: low+/-15dB @ 80Hz
EQ: mid+/-15dB @ 2.5kHz
EQ: high+/-15dB @ 12kHz
Phantom power: +48V switchable in pairs (XLR inputs only)
Frequency response: 20Hz - 22kHz (i1dB)
Input level: Mic +10dBu max. / Line +22dBu max.
Input impedance: Balanced XLR 2k Ohm, Balanced TRS jack 10k Ohm (unbal 20k Ohm)
THD +N: <0.05% @ 1kHz
Noise: EIN -122dBu (22Hz - 22kHz)
CMRR: >75dB (Mic 1kHz)
Sensitivity: XLR -60 to +10dBu, TRS jack -20 to +20dBu, Stereo -20 to +14dBu
Crosstalk>80dB (1kHz fader shutoff)
Outputs: Main L+R XLR, L+R Monitor 6.3mm, Headphones 6.3mm
Max. output level: XLR +22dBu, TRS +20dBu
Sends : returns1 Aux send, L+R return
Dimensions: 270 x 260 x 74mm
Weight: 1.495kg

In the Box

CMB-series mixing console
In-line USB-C power supply

Notes: Great value here. ESI's compact reference monitors offer solid bass response all the way down to 44 Hz, clear mids and high frequencies, plus the versatility of digital signal processing.

Supplier's Notes:
Building on the legacy of ESI's renowned nEar studio monitors and upgrading the popular aktiv 05, the nEar i5 near field reference monitor sets a new standard for entry-level users seeking professional-level 5" near field monitoring speakers.

This DSP-based Class-D studio monitor features an ultra-flat low frequency response, a newly designed silk dome tweeter (40W powered), and a special 5" woofer (50W powered) made from selected sustainable sturdy paper fibers. These components deliver an unparalleled punch in the low-mid frequency range, offering a response unheard of in this class.

The unique Character selection switch provides a smooth Mix & Listen setting or a precise Reference sound.

The nEar i series is yet another milestone in the ESI studio monitor legacy.

Notes: Building on the legacy of ESI's renowned nEar studio monitors, the nEar i7 near field reference monitor sets a new standard for entry-level users seeking professional-level 6.5" near field monitoring speakers.

This DSP-based Class-D studio monitor features an ultra-flat low frequency response, a newly designed silk dome tweeter (40W powered), and a special 6.5" woofer (50W powered) made from selected sustainable sturdy paper fibers. These components deliver an unparalleled punch in the low-mid frequency range, offering a response unheard of in this class.

The unique Character selection switch provides a smooth Mix & Listen setting or a precise Reference sound.

The nEar i series is yet another milestone in the ESI studio monitor legacy.

Notes: Blue version of the DJ Control Inpulse 200 MK2, a superb option for beginners and anyone looking for an ultra-portable DJ controller. Great value.

Supplier's Notes:
Elevate your DJing journey with the Hercules DJControl Inpulse 200 MK2 Blue Edition. This sleekcontroller comes packed with powerful features, including Serato DJ Lite and DJUCED software,designed to inspire creativity and unlock your full potential. The groundbreaking Stems feature lets youeffortlessly blend instrumentals from one track with vocals from another, opening endless possibilities for unique mixes.

Master the art of beatmatching with the intuitive Beatmatch Guide, featuring built-in light indicators below each jog wheel and beside each tempo fader, making track syncing a breeze. With 4 performance pads and 4 versatile modes (Hot Cue, Stems, FX, Sampler), you'll have everything you need to craftseamless, professional-level transitions that will captivate any crowd.

Whether you're a beginner or looking to refine your skills, the DJ Academy video tutorials offer step-by-step guidance, expert tips, and tricks to help you perfect your mixing techniques and take your sets to the next level. Let your creativity shine with the DJControl Inpulse 200 MK2 Blue Edition

Notes: ***B-STOCK: Box damaged, product in perfect working order***


iRig Stream Mic Pro

Compact multi-pattern microphone and stereo audio interface

iRig Stream Mic Pro it makes easier than ever to share your voice and music. It combines a professional multi-pattern condenser microphone and 24-bit, 96 kHz audio interface for iPhone, iPad, Android, Mac and PC into a single ultra-portable solution for music and content creation.

iRig Stream Mic Pro overview

Condenser microphone/audio interface for iPhone, iPad, Android, Mac/PC

Gold-sputtered 1/2" electret condenser capsule for pristine sound

Switchable cardioid, omnidirectional, figure-eight and stereo polar patterns
Adjustable high-pass filter to eliminate rumble and noise
3.5 mm stereo input for keyboards, mixers, drum machines and more
Stereo/multichannel modes: mix mic and line signals or keep separate
Loopback+ to add background music or process your voice all on a single device
Direct monitoring to check your sound before going live
Elegant all-in-one control knob for easy adjustments mid-stream ? Works with all your favourite apps

Pristine multi-pattern condenser microphone

First, make your voice heard with selectable cardioid, figure 8, omnidirectional or stereo pickup patterns. These patterns range from noise-rejecting to immersive audio, so whether you're recording a podcast, interview, instrument or ensemble, you'll enjoy crisp, clear and detailed signal with easily adjustable gain.

Integrated audio interface
Next, connect media players, keyboards, mixers, turntables, soundboards and more with the convenient 3.5mm audio input right on the mic. With its monitoring mix control you can blend the direct or recorded audio via the headphone output. Now you can keep your entire setup in one elegant, compact design you can easily take anywhere, and that connects to any device right out of the box.

Pro results with Loopback+ iRig Stream Mic Pro offers IK's ground-breaking Loopback+, letting you not only add music from your phone or tablet to your recording or stream, but even lets you route the mic signal into a separate app to add reverb, EQ or noise reduction (like the included MixBox CS for iPad) before sending to a second app like Instagram or Tiktok. It's an easy way to get massive sound on apps that don't normally let you process audio or add background music.

Connections/controls

Multi-function knob allows you to: - select the polar pattern - set on or off the high-pass-filter - mute the microphone signal - control the microphone gain - control the headphones level - control the streaming level - set on or off the direct monitor or the loopback.

1/8" headphones output
1/8" stereo line input: DC barrel to charge connected iOS device
Mini-DIN connector

Serious sound quality
iRig Stream Mic Pro delivers serious sound throughout, too. A headphone output with direct monitoring lets you check levels with any app, before you even hit record. And 24-bit, 96 kHz converters ensure pristine, detailed sound for both the mic and aux input.

Simple, live-optimized controls
All the features are controlled via a single, intuitive and live-optimized control knob, so it's easy to tweak on the fly without taking your eyes off the camera. Click through each setting quickly to make adjustments, and even hold down to mute if you need to cough or sneeze.
And easy-to-see LED level indicators mean you're not tied down by headphones if you want to record at a distance.

Specs

Common

Interface type: 2 in/2 out or 4 in/2 out
Conversion: 24-bit A/D, 24-bit D/A
Sampling rate: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Power: USB bus powered. When connected to an external PSU (iRig PSU 3A, not included), iRig Stream Mic Pro charges the connected iOS lightning device.
Device connection: mini-DIN
Dimensions: 55 mm/2.16" x 136 mm/5.35" x 38 mm/1.5"
Weight: 430 g/15.17 oz

Microphone
Microphone type: condenser, electret
Capsules: dual 0.55" gold-sputtered
Polar patterns: cardioid, omni, figure-8, stereo
Frequency response: from 20 Hz to 20 kHz
Maximum sound pressure: 115 dB SPL
High-pass filter: selectable between 60, 100 and 200 Hz

Headphone Output

Connector: 1/8" (3.5mm) TRS jack
Frequency response: from 20 Hz to 20 kHz
Output level: 7 mW/channel (32 Ohm load)
Dynamic range: 87 dB(A)

Aux Input

Connector: 1/8" (3.5 mm) TRS jack
Nominal input level: -10 dBV
Frequency response: from 10 Hz to 20 kHz

Package includes

iRig Stream Mic Pro
Table stand
mini-DIN to iOS Lightning cable - 60 cm/23.62"
mini-DIN to USB-C cable - 150 cm/62.99"
5/8" to 1/4" thread adapter

Box content

TONEX Pedal
Power supply
USB Cable

Notes: A neat button module with long-lasting 4x4 tactile buttons that provide instant access to triggering samples, launching clips, controlling playback, or just simply drumming.

Set them to momentary, 2 or 3-step toggle action to enjoy playful experimentation. Can be used with other Grid controllers used as a HID macro controller or for MIDI programming in your creative environment.

Equipped with customisable multi-coloured LED lights to enable labelling in dark environments. Facilitate differentiating each potmeter by changing the colour of each indicator LED, adjusting brightness levels individually or adding pulsing animations.

Thanks to its compact and lightweight structure, the BU16 is a fully ergonomic parameter controller with easily mappable push buttons.

It is recommended that Grid is connected directly to the computer with a USB-C cable (this is not included). Some USB hubs may not work with Grid, due to issues with how the various class compliant communication methods establish connection through a hub with the host computer.

Most digital audio workstations can identify Grid as a MIDI controller and appear as a MIDI mappable device. When multiple modules are interconnected, Grid is identified as a single control surface. If the interconnected controllers are plugged in separately into the same Host, they appear as Grid #1, Grid #2 MIDI devices and so forth.

By default, through the Host's MIDI learn functionality, all of the control elements can be mapped. Grid's default firmware uses a unique dynamic assignment, so a 10 module Grid control surface will have unique Channel, Command and CC/Note assignments on each control element.

Grid controllers are shipped with firmware default configuration. To modify the configurations of the controllers, the Grid Editor cross-platform application can be used. Through the Grid Editor, suggested manufacturer profiles and community profiles are also available. Grid has an event driven architecture, where every interaction with the controller triggers an event. The triggered event runs the configured actions, like setting LED colours and intensity.

Events on Grid available for configuration:
Init - when a page is initialized
Potmeter - fader or potentiometer change event
Encoder - rotation of endless encoders
Button - switch button or encoder interaction
Utility - side button
Midi rx - MIDI processing incoming to Grid
Timer - delayed message triggers

Grids are created to suit distinguished workflows. Whether it comes to controlling outboard hardware gear like synthesizers, guitar pedals, and effect boxes, or inboard software such as DAWs, Lightning, and VSTs, a Grid controller is an ideal choice.

Get started with Grid in an instant: just plug in, snap together and play. There is no need for a brain module or any additional software components.

Tech specs

Weight: ~ 175 grams (~ 0,38 lb)
Size: 106 mm x 106 mm (4.19 x 4.19 inches) Eurorack-sized modules
16 white tactile buttons with 1.27i0.49 N operating force
Customizable multi-coloured LED lights for easy labelling in dark environments

Materials

Black aluminium front panel with a metallic, rugged finish
Plastic push buttons in white
Injection moulded plastic base
Golden spring-loaded connector pins
Strong N52 neodymium magnets
Silicone feet on the back for extra stability

Compatibility

Class compliant MIDI device with simple PnP (Plug and Play) experience
USB HID keyboard class
Compatible with Mac OS (intel & arm), Windows, Linux and mobile platforms with support provided

Powering options (USB cable not included)

Single USB cable to power up to 8 modules
High speed USB 2.0
Draws ~250mA

Notes: From subtle adjustments to expressive performances, this versatile combination of control elements definitely won't disappoint you.

Includes metal shaft faders with medium resistance, smooth-turning knobs and sturdy buttons. Control your most used parameters, like expression, modulation and volume with the PBF4 Grid.

Equipped with customisable multi-coloured LED lights to enable labelling in dark environments. Facilitate differentiating each potmeter by changing the colour of each indicator LED, adjusting brightness levels individually or adding pulsing animations. All configurable in the Grid Editor.

Thanks to its compact and lightweight structure, the PBF4 is a fully ergonomic parameter controller with classical control elements in a slim modular design. Four banks, 4x possible configuration mappings switchable on the fly.

It is recommended that, Grid is connected directly to the computer with the supplied Intech Studio USB-C cable. Some USB hubs may not work with Grid, due to issues with how the various class compliant communication methods establish connection through a hub with the host computer.

Most digital audio workstations can identify Grid as a MIDI controller and appear as a MIDI mappable device. When multiple modules are interconnected, Grid is identified as a single control surface. If the interconnected controllers are plugged in separately into the same Host, they appear as Grid #1, Grid #2 MIDI devices and so forth.

By default, through the Host's MIDI learn functionality, all of the control elements can be mapped. Grid's default firmware uses a unique dynamic assignment, so a 10 module Grid control surface will have unique Channel, Command and CC/Note assignments on each control element.

Grid controllers are shipped with firmware default configuration. To modify the configurations of the controllers, the Grid Editor cross-platform application can be used. Through the Grid Editor, suggested manufacturer profiles and community profiles are also available. Grid has an event driven architecture, where every interaction with the controller triggers an event. The triggered event runs the configured actions, like setting LED colours and intensity.

Events on Grid available for configuration:
Init - when a page is initialized
Potmeter - fader or potentiometer change event
Encoder - rotation of endless encoders
Button - switch button or encoder interaction
Utility - side button
Midi rx - MIDI processing incoming to Grid
Timer - delayed message triggers

Grids are created to suit distinguished workflows. Whether it comes to controlling outboard hardware gear like synthesizers, guitar pedals, and effect boxes, or inboard software such as DAWs, Lightning, and VSTs, a Grid controller is an ideal choice.

Get started with Grid in an instant: just plug in, snap together and play. There is no need for a brain module or any additional software components.

Grid controllers are built with quality control elements. After numerous iterations the potentiometers have been carefully chosen to allow a firm grip and a stable control experience enabled by special shaft bushings.

The modules are made to withstand everyday studio use as well as the intense performances during tours. For connecting several Grids together, a flat surface or the use of our module stands is recommended.

Tech specs

Weight: ~ 175 grams (~ 0,38 lb)
Size: 106 mm x 106 mm (4.19 x 4.19 inches) Eurorack-sized modules
4 audio-grade linear metal shaft faders with 30mm travel
4 conductive, 300- single-turn plastic potentiometers with medium-hard resistance
4 tactile buttons with 1.27i0.49 N operating force
Customizable multi-coloured LED lights for easy labelling in dark environments

Materials

Black aluminium front panel with a metallic, rugged finish
Metal shaft faders equipped with dust cover
Plastic black potentiometers
White tactile plastic buttons
Injection moulded plastic base
Golden spring-loaded connector pins
Strong N52 neodymium magnets
Silicone feet on the back for extra stability

Compatibility

Class compliant MIDI device with simple PnP (Plug and Play) experience
USB HID keyboard class
Compatible with Mac OS (intel & arm), Windows, Linux and mobile platforms with support provided

Powering options

Single USB cable to power up to 8 modules
High speed USB 2.0
Draws ~250mA

Notes: The PO16 is a sleek, compact, single-turn rotary potentiometer module for controlling quick motion changes like EQ, filters, or synth parameters.

Equipped with customisable multi-coloured LED lights to enable labelling in dark environments. Facilitate differentiating each potmeter by changing the colour of each indicator LED, adjusting brightness levels individually or adding pulsing animations.

It is recommended that, Grid is connected directly to the computer with the supplied Intech Studio USB-C cable. Some USB hubs may not work with Grid, due to issues with how the various class compliant communication methods establish connection through a hub with the host computer.

Most digital audio workstations can identify Grid as a MIDI controller and appear as a MIDI mappable device. When multiple modules are interconnected, Grid is identified as a single control surface. If the interconnected controllers are plugged in separately into the same Host, they appear as Grid #1, Grid #2 MIDI devices and so forth.

By default, through the Host's MIDI learn functionality, all of the control elements can be mapped. Grid's default firmware uses a unique dynamic assignment, so a 10 module Grid control surface will have unique Channel, Command and CC/Note assignments on each control element.

Grid controllers are shipped with firmware default configuration. To modify the configurations of the controllers, the Grid Editor cross-platform application can be used. Through the Grid Editor, suggested manufacturer profiles and community profiles are also available. Grid has an event driven architecture, where every interaction with the controller triggers an event. The triggered event runs the configured actions, like setting LED colours and intensity.

Events on Grid available for configuration:
Init - when a page is initialized
Potmeter - fader or potentiometer change event
Encoder - rotation of endless encoders
Button - switch button or encoder interaction
Utility - side button
Midi rx - MIDI processing incoming to Grid
Timer - delayed message triggers

Grids are created to suit distinguished workflows. Whether it comes to controlling outboard hardware gear like synthesizers, guitar pedals, and effect boxes, or inboard software such as DAWs, Lightning, and VSTs, a Grid controller is an ideal choice.
Get started with Grid in an instant: just plug in, snap together and play. There is no need for a brain module or any additional software components.

Tech specs

Weight: ~ 175 grams (~ 0,38 lb)
Size: 106 mm x 106 mm Eurorack-sized modules (4.19 x 4.19 inches)
16 linear 300- single-turn conductive plastic potentiometers
Customizable multi-coloured LED lights for easy labelling in dark environments

Materials

Black aluminium front panel with a metallic, rugged finish
Ergonomic potentiometers in black with plastic knobs
Injection moulded plastic base
Golden spring-loaded connector pins
Strong N52 neodymium magnets
Silicone feet on the back for extra stability

Compatibility

Class compliant MIDI device with simple PnP (Plug and Play) experience
USB HID keyboard class
Compatible with Mac OS (intel & arm), Windows, Linux and mobile platforms with support provided

Powering options

Single USB cable to power up to 8 modules
High speed USB 2.0
Draws ~250mA

Notes: Unfold, connect, create wherever you go

The nanoKEY Fold is a compact, foldable MIDI keyboard that brings creative freedom to musicians and producers on the go. Small enough to fit in a pocket yet powerful enough for full-scale production, nanoKEY Fold unfolds to reveal 25 keys, complete with silent membrane technology and customisable velocity settings. This MIDI keyboard is designed for those who want inspiration at their fingertips, whether they're composing, performing, or producing on the go.

Instant portability, limitless potential

Unfold creativity on the go with nanoKEY Fold's innovative design. Its pocket-sized, foldable body makes it easy to carry, yet it opens up to reveal 25 keys, ready for any musical idea. Lightweight and minimalistic, it's crafted to go everywhere you go.

Comfort and control, anywhere

The silent membrane keybed delivers a smooth playing experience without disturbing those around you, while customisable velocity settings across 13 levels allow for expressive playing tailored to your touch. With nanoKEY Fold, music creation can be as quiet or dynamic as you want.

Enhance your music with built-in creative features

With this MIDI keyboard, scales, chords, and arpeggios are at your fingertips. Select from 15 scale types and let the LED-guided Scale mode keep your notes harmonically perfect. In Chord mode, assign full chords to each key, creating deep harmonies in an instant. The built-in arpeggiator opens endless rhythmic possibilities with 15 adjustable patterns and arpeggio types for inspired productions.

Responsive touch sliders and split functionality

Two touch sliders provide easy control over pitch and modulation, offering new dimensions to your sound. Assign sliders to trigger notes within your chosen scale, or divide the keyboard with the Split function, enabling custom left- and right-hand settings for expanded creativity.

Seamless connectivity with USB-C and MIDI

With both USB-C and TRS-MIDI outputs, nanoKEY Fold easily integrates with a wide range of setups, from mobile devices and computers to other MIDI-enabled instruments and controllers. A TRS-to-MIDI DIN adapter is included, providing instant compatibility with MIDI gear. Plug-and-play functionality ensures an effortless connection, keeping you focused on creating music.

Specifications

Keyboard
25 keys with customisable velocity (13 levels)

Octave Shift
-4 to +4

Scale Types
15 built-in scales

Arpeggiator
15 patterns

Scene Memory
15 user-defined scenes

Connectivity
USB-C, TRS-MIDI output (3.5mm stereo mini-phone jack, includes TRS to MIDI DIN adapter)

Power Supply
USB bus power (500 mA or less)

Dimensions
Folded: 147 × 73 × 17 mm / 5.79" × 2.87" × 0.67"
Unfolded: 282 × 73 × 14 mm / 11.10" × 2.87" × 0.55"

Weight
126 g / 4.44 oz

Included Items
USB cable, MIDI TRS-DIN adapter cable, Quick Start Guide

Notes: Unfold, connect, create wherever you go

The nanoKEY Fold is a compact, foldable MIDI keyboard that brings creative freedom to musicians and producers on the go. Small enough to fit in a pocket yet powerful enough for full-scale production, nanoKEY Fold unfolds to reveal 25 keys, complete with silent membrane technology and customisable velocity settings. This MIDI keyboard is designed for those who want inspiration at their fingertips, whether they're composing, performing, or producing on the go.

Instant portability, limitless potential

Unfold creativity on the go with nanoKEY Fold's innovative design. Its pocket-sized, foldable body makes it easy to carry, yet it opens up to reveal 25 keys, ready for any musical idea. Lightweight and minimalistic, it's crafted to go everywhere you go.

Comfort and control, anywhere

The silent membrane keybed delivers a smooth playing experience without disturbing those around you, while customisable velocity settings across 13 levels allow for expressive playing tailored to your touch. With nanoKEY Fold, music creation can be as quiet or dynamic as you want.

Enhance your music with built-in creative features

With this MIDI keyboard, scales, chords, and arpeggios are at your fingertips. Select from 15 scale types and let the LED-guided Scale mode keep your notes harmonically perfect. In Chord mode, assign full chords to each key, creating deep harmonies in an instant. The built-in arpeggiator opens endless rhythmic possibilities with 15 adjustable patterns and arpeggio types for inspired productions.

Responsive touch sliders and split functionality

Two touch sliders provide easy control over pitch and modulation, offering new dimensions to your sound. Assign sliders to trigger notes within your chosen scale, or divide the keyboard with the Split function, enabling custom left- and right-hand settings for expanded creativity.

Seamless connectivity with USB-C and MIDI

With both USB-C and TRS-MIDI outputs, nanoKEY Fold easily integrates with a wide range of setups, from mobile devices and computers to other MIDI-enabled instruments and controllers. A TRS-to-MIDI DIN adapter is included, providing instant compatibility with MIDI gear. Plug-and-play functionality ensures an effortless connection, keeping you focused on creating music.

Specifications

Keyboard
25 keys with customisable velocity (13 levels)

Octave Shift
-4 to +4

Scale Types
15 built-in scales

Arpeggiator
15 patterns

Scene Memory
15 user-defined scenes

Connectivity
USB-C, TRS-MIDI output (3.5mm stereo mini-phone jack, includes TRS to MIDI DIN adapter)

Power Supply
USB bus power (500 mA or less)

Dimensions
Folded: 147 × 73 × 17 mm / 5.79" × 2.87" × 0.67"
Unfolded: 282 × 73 × 14 mm / 11.10" × 2.87" × 0.55"

Weight
126 g / 4.44 oz

Included Items
USB cable, MIDI TRS-DIN adapter cable, Quick Start Guide

Notes: Unfold, connect, create wherever you go

The nanoKEY Fold is a compact, foldable MIDI keyboard that brings creative freedom to musicians and producers on the go. Small enough to fit in a pocket yet powerful enough for full-scale production, nanoKEY Fold unfolds to reveal 25 keys, complete with silent membrane technology and customisable velocity settings. This MIDI keyboard is designed for those who want inspiration at their fingertips, whether they're composing, performing, or producing on the go.

Instant portability, limitless potential

Unfold creativity on the go with nanoKEY Fold's innovative design. Its pocket-sized, foldable body makes it easy to carry, yet it opens up to reveal 25 keys, ready for any musical idea. Lightweight and minimalistic, it's crafted to go everywhere you go.

Comfort and control, anywhere

The silent membrane keybed delivers a smooth playing experience without disturbing those around you, while customisable velocity settings across 13 levels allow for expressive playing tailored to your touch. With nanoKEY Fold, music creation can be as quiet or dynamic as you want.

Enhance your music with built-in creative features

With this MIDI keyboard, scales, chords, and arpeggios are at your fingertips. Select from 15 scale types and let the LED-guided Scale mode keep your notes harmonically perfect. In Chord mode, assign full chords to each key, creating deep harmonies in an instant. The built-in arpeggiator opens endless rhythmic possibilities with 15 adjustable patterns and arpeggio types for inspired productions.

Responsive touch sliders and split functionality

Two touch sliders provide easy control over pitch and modulation, offering new dimensions to your sound. Assign sliders to trigger notes within your chosen scale, or divide the keyboard with the Split function, enabling custom left- and right-hand settings for expanded creativity.

Seamless connectivity with USB-C and MIDI

With both USB-C and TRS-MIDI outputs, nanoKEY Fold easily integrates with a wide range of setups, from mobile devices and computers to other MIDI-enabled instruments and controllers. A TRS-to-MIDI DIN adapter is included, providing instant compatibility with MIDI gear. Plug-and-play functionality ensures an effortless connection, keeping you focused on creating music.

Specifications

Keyboard
25 keys with customisable velocity (13 levels)

Octave Shift
-4 to +4

Scale Types
15 built-in scales

Arpeggiator
15 patterns

Scene Memory
15 user-defined scenes

Connectivity
USB-C, TRS-MIDI output (3.5mm stereo mini-phone jack, includes TRS to MIDI DIN adapter)

Power Supply
USB bus power (500 mA or less)

Dimensions
Folded: 147 × 73 × 17 mm / 5.79" × 2.87" × 0.67"
Unfolded: 282 × 73 × 14 mm / 11.10" × 2.87" × 0.55"

Weight
126 g / 4.44 oz

Included Items
USB cable, MIDI TRS-DIN adapter cable, Quick Start Guide

Notes: Unfold, connect, create wherever you go

The nanoKEY Fold is a compact, foldable MIDI keyboard that brings creative freedom to musicians and producers on the go. Small enough to fit in a pocket yet powerful enough for full-scale production, nanoKEY Fold unfolds to reveal 25 keys, complete with silent membrane technology and customisable velocity settings. This MIDI keyboard is designed for those who want inspiration at their fingertips, whether they're composing, performing, or producing on the go.

Instant portability, limitless potential

Unfold creativity on the go with nanoKEY Fold's innovative design. Its pocket-sized, foldable body makes it easy to carry, yet it opens up to reveal 25 keys, ready for any musical idea. Lightweight and minimalistic, it's crafted to go everywhere you go.

Comfort and control, anywhere

The silent membrane keybed delivers a smooth playing experience without disturbing those around you, while customisable velocity settings across 13 levels allow for expressive playing tailored to your touch. With nanoKEY Fold, music creation can be as quiet or dynamic as you want.

Enhance your music with built-in creative features

With this MIDI keyboard, scales, chords, and arpeggios are at your fingertips. Select from 15 scale types and let the LED-guided Scale mode keep your notes harmonically perfect. In Chord mode, assign full chords to each key, creating deep harmonies in an instant. The built-in arpeggiator opens endless rhythmic possibilities with 15 adjustable patterns and arpeggio types for inspired productions.

Responsive touch sliders and split functionality

Two touch sliders provide easy control over pitch and modulation, offering new dimensions to your sound. Assign sliders to trigger notes within your chosen scale, or divide the keyboard with the Split function, enabling custom left- and right-hand settings for expanded creativity.

Seamless connectivity with USB-C and MIDI

With both USB-C and TRS-MIDI outputs, nanoKEY Fold easily integrates with a wide range of setups, from mobile devices and computers to other MIDI-enabled instruments and controllers. A TRS-to-MIDI DIN adapter is included, providing instant compatibility with MIDI gear. Plug-and-play functionality ensures an effortless connection, keeping you focused on creating music.

Specifications

Keyboard
25 keys with customisable velocity (13 levels)

Octave Shift
-4 to +4

Scale Types
15 built-in scales

Arpeggiator
15 patterns

Scene Memory
15 user-defined scenes

Connectivity
USB-C, TRS-MIDI output (3.5mm stereo mini-phone jack, includes TRS to MIDI DIN adapter)

Power Supply
USB bus power (500 mA or less)

Dimensions
Folded: 147 × 73 × 17 mm / 5.79" × 2.87" × 0.67"
Unfolded: 282 × 73 × 14 mm / 11.10" × 2.87" × 0.55"

Weight
126 g / 4.44 oz

Included Items
USB cable, MIDI TRS-DIN adapter cable, Quick Start Guide

Notes: *** Update February 2025- NKS Integration available with this product ***

Native Kontrol Standard (NKS) is a technical standard that connects plugins to hardware controllers with no setup required. The NKS ecosystem includes over 2,000 virtual instruments and plugin effects by over 250 acclaimed developers.

NKS enables users to load instruments and effects, tweak parameters, browse and manage presets with tangible controls, keeping creators' minds and hands on the music. No time is wasted creating, saving, and resetting controller parameter mappings.

Key features include:
Unified Control: NKS maps plugin parameters directly to hardware controls, allowing for hands-on adjustments without navigating computer menus.
Efficient Workflow: It streamlines browsing, loading, and editing presets, enabling producers to stay focused on creativity.
Broad Compatibility: Many third-party developers support NKS, offering a wide range of compatible sounds and effects.
For Our Products: This integration allows Akai and M-Audio compatible devices to fully utilize all NKS workflow features.

Here are some key points to take note of:

Current users will receive the software bundle once they register their device.

Both existing and new owners will receive the software bundle once their hardware is registered.


NKS Software Partnerships

For years, Native Instruments has partnered with world-class software manufacturers, including Arturia, Heavyocity, Korg, Output, Spitfire Audio, and many more, to bring thousands of instruments and effects plugins into the NKS ecosystem. Together with Native Instruments' own instruments and effects, this creates the most extensive database of any auto-mapped hardware controller ecosystem.

Until now, NKS hardware controllers were only available from Native Instruments, such as the Kontrol S-Series and Komplete Kontrol A-Series keyboard controllers.

NKS Hardware Partner Program [New]

At NAMM 2025, NI announced opening up NKS compatibility for third-party, non-NI hardware, allowing millions of performers and producers worldwide to enter the NKS ecosystem.

Supplier's notes:

Welcome to the brand-new Oxygen Series from M-Audio, the Oxygen Series (MKV). In today's world of music production, controlling your digital music environment is important. It is not only how the pros improve their workflow, but also how they create unique cutting-edge signature sounds.AM-Audio has updated the most iconic series of MIDI keyboard controllers on the market for software-based music production and performance. The new Oxygen Series (MKV) keyboard controllers offer innovative advancements in hardware control enabling you to create modern cutting-edge music on stage or in the studio.

Professional Producer Features

The Oxygen 49 (MKV) controller includes powerful features essential for creating and producing music such as Note Repeat (a staple mark in beat production), Full Velocity Control of keys and 8 pads, 8 assignable knobs for controlling effect plugins and virtual instruments, and 9 assignable faders for mixing: all opening a world of precise music creation techniques making your signature sound professional and modern.

Note Repeat allows you to hold down any of theA8Acustom-made M-Audio velocity-sensitive performance pads in 2 available pad banks to hear a repeated rhythmic pattern at a selectable note division. The Note Repeat feature can be activated momentarily or can be used in Latch mode. If you choose Momentary, holding the Note Repeat button will make the note played by the pad automatically repeat. If you choose Latch, pressing any pad will cause its assigned note to repeat without having to hold down the Note Repeat button.

Built-in Arpeggiator

Arpeggiators help add excitement and movement to music quickly and easily. The built-in Arpeggiator on the Oxygen 49 (MKV) with Type, Octave, Gate and Swing controls will creatively affect anything you are playing on the keys from any virtual instrument in your DAW. When the Arpeggiator is activated, the keyboard will repeatedly play the keys that are pressed in the selected sequence. The arpeggiator's timing and rhythm is based on the keyboard's time division setting in either the keyboard's tempo, or your DAW's tempo setting. Each note in the arpeggio will be the length selected for the time division setting. For example, if you select 1/4, each note in the arpeggio will be audible in quarter note increments. This powerful tool can operate in Latch or Momentary mode, making it easy to unleash your creativity.

Smart Controls

Smart Chord and Smart Scale technology are the bridges between your musically creative mind and your final productions. TheASmart Chord feature helps bring out your inner musical genius by playing full chords with a single key press, and with the Smart Scale feature, the Oxygen 49 (MKV) keys transform into a perfect scale, playing the exact notes within a chosen scale. With Smart Chord and Smart Scale technology, creating music and unleashing your unlimited creativity has never been easier.

With Smart Chord activated, pressing a single key will play a full chord rather than just one note. The key you press will determine the root note in the chord. The rest of the chord's properties (Major, Minor, and Voicing) are determined by the settings you choose. Smart Chord also has a Custom Mode which lets you determine the chord structure that will be assigned to each key by manually playing it. For example, if you select Custom Mode, and play a 1-b3-5-b7 chord, every key will then be assigned to play this chord structure. The note of the key you press will serve as the root of the chord and all the parameters can be edited right on your Oxygen keyboard controller.

The Oxygen series also features intelligent Smart Scale technology. With Smart Scale, you can set the keybed so that only notes in the selected scale are able to be played. This allows you to play within a chosen scale without the risk of playing any wrong notes. You can choose from over 15 different scale variations when assigning a scale to the keyboard. With Smart Scale controls right on the keys, you will have easy access to set and change Smart Scale parameters on the fly, keeping you focused on what is most important, creating music.

Auto-Mapping for Creative DAW Control

Using the Oxygen 49 (MKV) controller with any DAW is incredibly easy. The controls such as Transport, Faders, Pan, Record Arm, Solo, Mute, Select and many more, are automatically mapped to most DAWs for a fluid workflow. The Oxygen 49 (MKV) works with all major DAWs including Ableton, Pro Tools, MPC Beats, Cubase, Logic, Studio One and many more. By simply selecting your DAW on the Oxygen 49 (MKV) keyboard controller and configuring your DAW's preferences to the keyboard, a new world of creative production is at your fingertips. The Oxygen 49 (MKV) keyboard also includes presets for all the virtual instruments and plugins that are included (Mini Grand and Hybrid 3).

Notes: Your work + play speakers

Shape the sound of your Mackie CR3.5BT studio monitors on the fly, so you can mix a podcast episode, listen to music and DJ a house party, all with the same set of compact speakers.

Two speakers. All your listening.

Content Creation & Gaming

Add a set of our creative reference monitors to your setup for immersive sound you can tweak to your liking. Just connect your speakers to your gaming PC, audio interface, or Mainstream streaming interface, then adjust the tone knob until you hear the full impact of every footstep, line of dialogue and epic soundtrack moment.

Music Production

CR3.5BT studio monitors have the clear, accurate sound you need to produce and record music. With the tone knob turned all the way left, you get a flat frequency response for tracking and mixing. Crank the tone knob to the right to hear more bass and sparkle.

Casual Listening

When your space serves as an office, recording studio, streaming den, living area and more, you need speakers that can do it all. That's why CR Series monitors have versatile features like the tone control knob and the location switch to quickly adjust your listening experience to any situation you prefer.

Control your sound. Change your location. Connect to anything.

Tone Control

Use the tone control knob to shape the sound, starting with the transparent response you expect from studio monitors. Turn the knob to gradually boost the bass and add high-end sparkle, perfect for using CR3.5BT as immersive gaming speakers, casual listening speakers or all-out party speakers.

Location Switch

Flip the location switch between desktop speaker mode and bookshelf speaker mode to optimize CR3.5BT for wherever you place them. Use desktop mode for listening up close (like in the studio) and bookshelf mode for listening at a distance (like from the couch).

All the Ins and Outs

Hook up audio interfaces, mixers, record players and other playback devices with TRS, RCA and 3.5 mm inputs. Switch to headphones with the built-in headphone output - just connect your headphones to cut the speaker audio and listen quietly.

Better with Bluetooth

Enjoy true flexibility with wireless Bluetoothr streaming. Press the icon on the front of the powered speaker to pair your favourite devices such as smartphones, laptops, and more for studio-quality sound anywhere.

Product features

Sound-shaping tone control
Location switch with desktop and bookshelf modes
TRS, RCA and 3.5 mm inputs
Bluetooth connectivity
Built-in headphone output
Silk dome tweeter with protective grille
3.5" woven woofer
Size (H × W × D): 8.1 × 5.5 × 7.1 in / 206 × 140 × 180 mm
Weight: 8.1 lb / 3.7 kg

Notes: Your work + play speakers

Shape the sound of your Mackie CR4.5 studio monitors on the fly, so you can mix a podcast episode, listen to music and DJ a house party, all with the same set of compact speakers.

Content Creation & Gaming

Add a set of our creative reference monitors to your setup for immersive sound you can tweak to your liking. Just connect your speakers to your gaming PC, audio interface, or Mainstream streaming interface, then adjust the tone knob until you hear the full impact of every footstep, line of dialogue and epic soundtrack moment.

Music Production

CR4.5 studio monitors have the clear, accurate sound you need to produce and record music. With the tone knob turned all the way left, you get a flat frequency response for tracking and mixing. Crank the tone knob to the right to hear more bass and sparkle.

Casual Listening

When your space serves as an office, recording studio, streaming den, living area and more, you need speakers that can do it all. That's why CR Series monitors have versatile features like the tone control knob and the location switch to quickly adjust your listening experience to any situation you prefer.

Control your sound. Change your location. Connect to anything.

Tone Control

Use the tone control knob to shape the sound, starting with the transparent response you expect from studio monitors. Turn the knob to gradually boost the bass and add high-end sparkle, perfect for using CR4.5 as immersive gaming speakers, casual listening speakers or all-out party speakers.

Location Switch

Flip the location switch between desktop speaker mode and bookshelf speaker mode to optimize CR4.5 for wherever you place them. Use desktop mode for listening up close (like in the studio) and bookshelf mode for listening at a distance (like from the couch).

All the Ins and Outs

Hook up audio interfaces, mixers, record players and other playback devices with TRS, RCA and 3.5 mm inputs. Switch to headphones with the built-in headphone output - just connect your headphones to cut the speaker audio and listen quietly.

Headphone output

Switch from blasting tunes to quiet listening with the built-in headphone output conveniently placed right up front- just connect your headphones to cut the speaker audio.

Product features

Sound-shaping tone control
Location switch with desktop and bookshelf modes
TRS, RCA and 3.5 mm inputs
Built-in headphone output
Silk dome tweeter with protective grille
4.5" woven woofer
Size (H × W × D): 8.9 x 6.1 x 8.3 in / 226 x 155 x 211 mm
Weight: 10.1 lb / 4.6 kg

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Your work + play speakers

Shape the sound of your Mackie CR4.5 studio monitors on the fly, so you can mix a podcast episode, listen to music and DJ a house party, all with the same set of compact speakers.

Content Creation & Gaming

Add a set of our creative reference monitors to your setup for immersive sound you can tweak to your liking. Just connect your speakers to your gaming PC, audio interface, or Mainstream streaming interface, then adjust the tone knob until you hear the full impact of every footstep, line of dialogue and epic soundtrack moment.

Music Production

CR4.5 studio monitors have the clear, accurate sound you need to produce and record music. With the tone knob turned all the way left, you get a flat frequency response for tracking and mixing. Crank the tone knob to the right to hear more bass and sparkle.

Casual Listening

When your space serves as an office, recording studio, streaming den, living area and more, you need speakers that can do it all. That's why CR Series monitors have versatile features like the tone control knob and the location switch to quickly adjust your listening experience to any situation you prefer.

Control your sound. Change your location. Connect to anything.

Tone Control

Use the tone control knob to shape the sound, starting with the transparent response you expect from studio monitors. Turn the knob to gradually boost the bass and add high-end sparkle, perfect for using CR4.5 as immersive gaming speakers, casual listening speakers or all-out party speakers.

Location Switch

Flip the location switch between desktop speaker mode and bookshelf speaker mode to optimize CR4.5 for wherever you place them. Use desktop mode for listening up close (like in the studio) and bookshelf mode for listening at a distance (like from the couch).

All the Ins and Outs

Hook up audio interfaces, mixers, record players and other playback devices with TRS, RCA and 3.5 mm inputs. Switch to headphones with the built-in headphone output - just connect your headphones to cut the speaker audio and listen quietly.

Headphone output

Switch from blasting tunes to quiet listening with the built-in headphone output conveniently placed right up front- just connect your headphones to cut the speaker audio.

Product features

Sound-shaping tone control
Location switch with desktop and bookshelf modes
TRS, RCA and 3.5 mm inputs
Built-in headphone output
Silk dome tweeter with protective grille
4.5" woven woofer
Size (H × W × D): 8.9 x 6.1 x 8.3 in / 226 x 155 x 211 mm
Weight: 10.1 lb / 4.6 kg

Notes: Your work + play speakers

Shape the sound of your Mackie CR4.5BT studio monitors on the fly, so you can mix a podcast episode, listen to music and DJ a house party, all with the same set of compact speakers.

Two speakers. All your listening.

Content Creation & Gaming

Add a set of our creative reference monitors to your setup for immersive sound you can tweak to your liking. Just connect your speakers to your gaming PC, audio interface, or Mainstream streaming interface, then adjust the tone knob until you hear the full impact of every footstep, line of dialogue and epic soundtrack moment.

Music Production

CR4.5BT studio monitors have the clear, accurate sound you need to produce and record music. With the tone knob turned all the way left, you get a flat frequency response for tracking and mixing. Crank the tone knob to the right to hear more bass and sparkle.

Casual Listening

When your space serves as an office, recording studio, streaming den, living area and more, you need speakers that can do it all. That's why CR Series monitors have versatile features like the tone control knob and the location switch to quickly adjust your listening experience to any situation you prefer.

Control your sound. Change your location. Connect to anything.

Tone Control

Use the tone control knob to shape the sound, starting with the transparent response you expect from studio monitors. Turn the knob to gradually boost the bass and add high-end sparkle, perfect for using CR4.5BT as immersive gaming speakers, casual listening speakers or all-out party speakers.

Location Switch

Flip the location switch between desktop speaker mode and bookshelf speaker mode to optimize CR4.5BT for wherever you place them. Use desktop mode for listening up close (like in the studio) and bookshelf mode for listening at a distance (like from the couch).

All the Ins and Outs

Hook up audio interfaces, mixers, record players and other playback devices with TRS, RCA and 3.5 mm inputs. Switch to headphones with the built-in headphone output - just connect your headphones to cut the speaker audio and listen quietly.

Better with Bluetooth

Enjoy true flexibility with wireless Bluetooth streaming. Press the icon on the front of the powered speaker to pair your favourite devices such as smartphones, laptops, and more for studio-quality sound anywhere.

Product features

Sound-shaping tone control
Location switch with desktop and bookshelf modes
TRS, RCA and 3.5 mm inputs
Bluetooth connectivity
Built-in headphone output
Silk dome tweeter with protective grille
4.5" woven woofer
Size (H × W × D): 8.9 × 6.1 × 8.3 in / 226 × 155 × 211 mm
Weight: 9.9 lb / 4.5 kg

Notes: ***B-STOCK: Box opened, product in perfect working order***


The Nektar Impact GXP49 USB MIDI controller keyboard is designed for players: Experience 49 semi-weighted keys and instant access to performance controls including a real-time repeat engine, powerful Nektarine plugin patch management and Nektar DAW Integration. GXP gives you the keys to a great performance!

GXP Keys
PLAY - Treat your fingers to a dynamic semi-weighted keyboard with velocity and aftertouch that captures all aspects of your performances.

GXP Repeat Section
REPEAT - The Repeat Engine lets you create inspiring rhythmic elements with direct and intuitive realtime access from dedicated Repeat controls.

Impact GXP Transport
DAW CONTROL - Control essential DAW functions directly from Impact GXP using the dedicated transport controls. Supports 12 DAWs.

GXP Software Bundle
PRODUCE - All you need to create is included: Licenses for Steinberg's acclaimed Cubase LE Music Production Software and Retrologue virtual synthesizer.

KEYS: JUST THE RIGHT TOUCH
At the core of GXP49 is a newly designed and carefully balanced keyboard action. Its 49 semi-weighted full-size keys with velocity and aftertouch deliver a nice, firm touch and great playability.

Impact GXP 49 Front left view
Choose from 5 different velocity curves to tailor Impact GXP's keyboard sensitivity to your personal needs. The curves cover a wide dynamic range from soft to hard touch. The default curve "normal" is optimized to deliver good control across the whole velocity range right out of the box. In addition, 3 fixed levels let you send fixed velocity values across the whole keyboard if needed.

Nektar Impact GXP49 Control

DIRECT ACCESS: THE CONTROLS YOU NEED
The streamlined no-fuss control panel is based on the successful Nektar Impact GX-series, enabling advanced DAW integration with extended transport control, track selection and volume control as well as options to open/close DAW windows and navigate songs. In addition, GXP88's user interface also has 14 assignable illuminated RGB buttons for direct MIDI program- and bank-selection.

Impact GXP is a MIDI controller as well as a DAW controller:
If you use MIDI software that's not supported by Nektar DAW Integration, you can also set up MIDI control yourself. The assignable buttons in the transport section can be configured to send out Program message or MMC (MIDI Machine Control) transport control. In addition, any of the 28 assignable MIDI buttons, the modulation wheel, keyboard aftertouch, foot switches and of course the big control knob, can be assigned to send out MIDI cc messages. The settings are stored over power cycling.

GREAT CONNECTIVITY:
MIDI, PEDALS, POWER
The GXP49 gives keyboard players all the right expression options needed for live and studio work. It offers large pitch bend & modulation wheels and connections for up to 3 optional external pedals: Connect any standard expression pedal to the first, and any standard footswitch to the second socket. And if you use an optional Y-cable adapter, the footswitch socket even supports two independent switches.

Impact GXP Pedal Connections
Impact GXP Back Panel
Impact GXP can also be used stand-alone with external MIDI gear: The rear panel includes a 5-pin MIDI out jack and an external power supply socket for powering the unit when not connected via USB.

GXP Repeat Section 2

REPEAT: GET INSPIRED
The Repeat Engine is great for creating inspiring rhythmic elements: Simply press the dedicated Repeat button, play and get inspired.

The RGB buttons now give you direct one-button access to Repeat Rates, Accent, Interval, Swing and routing aftertouch or modulation to velocity. The large Data/Tempo Encoder turns into a dedicated tempo control, unless synchronization is set to external MIDI clock.

Choose from 5 different key trigger modes to change the repeat behaviour from interesting arpeggio-style effects with human feel to hard-quantized repetitive rhythms. Repeat is a fun way to experiment and create those famous "happy accidents", that make you come up with unexpected new ideas.

GXP Repeat Engine

NEKTAR DAW INTEGRATION: GIVE YOUR MOUSE A BREAK!
Install Nektar DAW Integration and the 8 buttons right above the wheels let you take control of essential tasks in your DAW right from Impact GXP. Features cover extended transport control including goto and set locators, track navigation, volume control, launching windows and patch navigation - without ever reaching for the mouse.

Notes: Discover Biotron, the musical instrument that transforms plants into sound.

Play with your favourite plant and let nature compose your music. As the plant's natural electrical properties change, the sound evolves, creating a unique musical experience every time.

Ready to get started? Connect Biotron to a computer, tablet, or smartphone, and play with our online synth or your favourite music software/hardware. With no noticeable latency, Biotron responds just like any other MIDI controller.

What you can do

- Play using plants as your instrument
- Change the sound based on the plant's natural responses
- Interact with nature to create music
- No musical skill needed

How to use

- Connect Biotron to your PC, phone, or tablet using the provided USB cable.
- Attach the electrodes to your plant. Ensure they are securely connected to the stems or leaves for optimal conductivity.

- Open Google Chrome and navigate to synth.playtronica.com, then choose any synth you like. Alternatively, use your preferred music software or hardware that accepts MIDI input.

- Interact with your plant by moving your hands near it, touching its leaves, or adjusting environmental factors like light and moisture to influence the sound.

- Experience the unique music generated by your plant's natural electrical activity translated into MIDI signals

Kit includes

- Biotron MIDI-controller and packaging
- USB-C cable is sold separately to reduce waste in case you have one already
- Alligator clips and patches are also not included, make sure you add whichever you need

Notes: ***B-STOCK: Box opened, product in perfect working order***


PreSonus' Eris 3.5BT studio monitors are the perfect way to bring studio-quality sound to your home. With Bluetooth wireless connectivity, you can stream your favourite music from any device, and with their 50W of onboard Class AB power, you can enjoy loud, clear audio without any distortion.

The Eris 3.5BT studio monitors are also perfect for gaming and content creation. Fine-tune the speakers' response to your exact needs with low- and high-frequency tuning controls or listen to your music in private with the integrated headphone amplifier.

The Eris 3.5BT speakers are also incredibly versatile. They're small enough to fit on any desk, but they're powerful enough to fill any room with sound. They'll look great in any environment with their elegant design.

Features

3.5-inch, woven-composite, low-frequency transducer
1-inch (25 mm), ultra-low-mass, silk-dome, high-frequency transducer
Fast, reliable, stereo Bluetoothr 5.0 wireless input
50W (25W/side) Class AB amplification
80 Hz to 20 kHz frequency response
98 dB SPL (Peak, @ 1 meter)
High- and low-frequency Acoustic Tuning controls
Balanced, 14-inch TRS inputs; unbalanced, 1/4-inch stereo and RCA inputs; and integrated stereo headphone amplifier with front-panel 1/4-inch output
Protection: RF interference, output-current limiting, over-temperature, turn-on/off transient, subsonic filter
Power Saver mode (engages after 40 minutes)
Comes with speaker wire, 1/4-inch TRS to stereo RCA cable, and stereo RCA to stereo TS cable

Versatile connectivity.

PreSonus Eris 3.5 BTs connect wirelessly using Bluetooth 5.0 or via a wired connection to virtually any line-level audio source, using rear-panel 14-inch TRS and RCA inputs and a front-panel, 1/4-inch stereo line input. You also get a convenient (and loud!) front-panel, 1/4-inch stereo headphone jack; connecting headphones mutes the speakers.

Built to match your room.

Unlike other home audio speakers that hype the bass at the expense of other frequencies, Erisr speakers provide an even response throughout the frequency range, from bass to treble. This means you'll hear your favourite music exactly as artists and engineers intend it to be heard. High and Low Acoustic Tuning controls let you dial in the Eris 3.5 BTs precisely to your environment to further ensure the best sound possible.

Honest. Expressive. Powerful.

Like all PreSonus media reference monitors, the Erisr 3.5 BT offers consistent, accurate listening. Their stylish design makes them a welcome addition to living rooms, compact home theatre setups, and gaming rigs, and their smooth and even frequency response ensures that your music - and everyone else's - will sound incredible.

Electronics
Voltage: 220-240V UK
Wattage: 25 Watts (Each Speaker)
Input impedance: 10 kO

Speakers
Crossover frequency: 2.8 kHz

Performance
Peak SPL: 98 dB (@ 1 Meter)

Hardware
Cabinet material: Vinyl-Laminated, Medium-Density Fiberboard
Audio controls: Volume High Frequency (+/-6 dB, center 10 kHz, continuously variable) Low Frequency (+/-6 dB, center 100 Hz, continuously variable)
Monitor inputs: Bluetooth 5.0, 1- Stereo 1/8", 2-Balanced 1/4" TRS, 2-Unbalanced RCA
Power amplifier type: Class AB

Measurements

Dimensions: 8.30 x 5.50 x 6.00 in

Product depth: 6.5" (16.4 cm)
Product height: 8.3" (21.0 cm)
Product width: 5.6" (14.1 cm)

Notes: The iconic VW camper van-inspired record player gets a limited-edition gold makeover. Simply place the battery-powered van on any 33 rpm record and listen back via a wireless Bluetooth connection.

Supplier's Notes:
As the world's smallest portable vinyl record player, the RECORD RUNNER is for anyone whether a DJ, record collector or a simple music lover.

It is a self-contained record player, small enough to fit on the palm of your hand.

Just place it on any 33 1/3 rpm vinyl record and listen to it play.

Totally reengineered from the past 35 year old model, the RECORD RUNNER is ALL NEW!

We have made drastic measures to improve the quality from our older model.

They are hand built, assembled, and MADE IN JAPAN.

Now you can play your favourite records through your speaker as the Record Runner connects to your Bluetooth enabled speakers to play your records through as it drives around.

Whether shopping for vinyl records, checking out the stash at your local garage sale or listening to your old man' s disco records (or your own), the RECORD RUNNER is a definite must.

Amaze everyone with the RECORD RUNNER.

Notes: As the world's smallest portable vinyl record player, the RECORD RUNNER is for anyone whether a DJ, record collector or a simple music lover.

It is a self-contained record player, small enough to fit on the palm of your hand.

Just place it on any 33 1/3 rpm vinyl record and listen to it play.

Totally reengineered from the past 35 year old model, the RECORD RUNNER is ALL NEW!

We have made drastic measures to improve the quality from our older model.

They are hand built, assembled, and MADE IN JAPAN.

Now you can play your favourite records through your speaker as the Record Runner connects to your Bluetooth enabled speakers to play your records through as it drives around.

Whether shopping for vinyl records, checking out the stash at your local garage sale or listening to your old man' s disco records (or your own), the RECORD RUNNER is a definite must.

Amaze everyone with the RECORD RUNNER.

Notes: Magenta colourway of the iconic Record Runner vinyl player, based on the design of the classic VW camper van. Simply place on your record and listen via the built-in speaker or stream over Bluetooth.

Supplier's Notes:
As the world's smallest portable vinyl record player, the Record Runner is for anyone whether a DJ, record collector or a simple music lover, just place it on any 33rpm vinyl record and listen to it play.

Totally reengineered from the past 35 year old model, the Record Runner is all new! Now you can play your favourite records through your speaker as the Record Runner connects to your Bluetooth enabled speakers to play your records through as it drives around.

Whether shopping for vinyl records, checking out the stash at your local garage sale or listening to your old man' s disco records (or your own), the Record Runner is a definite must. Hand built in Japan, amaze everyone with the Record Runner!

Notes: As the world's smallest portable vinyl record player, the Record Runner is for anyone whether a DJ, record collector or a simple music lover, just place it on any 33rpm vinyl record and listen to it play.

Totally reengineered from the past 35 year old model, the Record Runner is all new! Now you can play your favourite records through your speaker as the Record Runner connects to your Bluetooth enabled speakers to play your records through as it drives around.

Whether shopping for vinyl records, checking out the stash at your local garage sale or listening to your old man' s disco records (or your own), the Record Runner is a definite must. Hand built in Japan, amaze everyone with the Record Runner!

Notes: As the world's smallest portable vinyl record player, the Record Runner is for anyone whether a DJ, record collector or a simple music lover, just place it on any 33rpm vinyl record and listen to it play.

Totally reengineered from the past 35 year old model, the Record Runner is all new! Now you can play your favourite records through your speaker as the Record Runner connects to your Bluetooth enabled speakers to play your records through as it drives around.

Whether shopping for vinyl records, checking out the stash at your local garage sale or listening to your old man' s disco records (or your own), the Record Runner is a definite must. Hand built in Japan, amaze everyone with the Record Runner!

Notes: For the 20th anniversary of the legendary Fireface 800, RME introduces an exclusive special edition ARC USB in a sleek all-black design to complement the limited edition Fireface 802 FS AE.

Overview

This wired remote has been designed for direct access to the most frequently used actions and commands of TotalMix FX, being an indispensable tool in the studio's daily applications. Its extremely flexible configuration through TotalMix FX will simplify workflow and greatly increase the usability of the RME interface in most real-world situations.

The ARC USB is a USB 1.1 (UAC1) MIDI remote control, natively compatible to Windows and Mac OS X. As soon as it is present in the operating system TotaIMix FX will detect it and communicate with it, without disturbing other remote controls. Therefore, it is also not necessary to switch the ARC USB on or off within TotalMix FX - it will just work. And because it communicates with TotalMix FX (via USB) it is compatible to all RME audio interfaces that are detected and supported by TotalMix FX. This goes back to RME interfaces released 2001!

As soon as the ARC USB is connected to a computer any button press or wheel turning will cause the respective action performed by TotalMix FX - and therefore also by the RME audio interface.

With the UFX III and UFX II the ARC USB can also be connected directly to these devices, currently the only RME interfaces having an internal USB 1.1 host with matching connector. This way of connecting is handy in stand-alone mode, where the ARC USB is also supported by the UFX III and UFX II.

The ARC USB is bus powered, but draws only little current. Also, it uses USB 1.1 as bus standard, which these days is uncritical due to its lower frequency and speed demands. USB 2 cables with 5 metre to 10-metre length, and cheap USB 2 cable extensions that usually make a bus-powered interface fail will work perfectly for the ARC USB. Still at higher lengths RME recommends using active USB 2 cables (also called extension or repeater cables), which are not expensive and work over lengths of more than 20 meters.

The ARC USB can control several interfaces simultaneously, which happens automatically as the Key Commands dialog in TotalMix FX is specific to the currently selected audio interface. Just assign only the functions that are desired for each respective interface. After that the ARC USB keys and the encoder wheel remote the respective interface where they have been assigned to, without the need to further switch or select anything in normal operation.

The lower three keys have a useful diagnostic functionality
Talkback: is lit dim as soon as the ARC USB is running on 5 V USB bus power.
Speaker B: is lit dim as soon as a USB communication is possible.
DIM: is lit dim as soon as a communication with TotalMix FX is established.
Therefore, in normal operation all three lower keys are lit dim constantly.

The ARC USB comes with a standard set of Key Commands that already cover most usage scenarios, printed directly beneath the keys:
Row 1 and 2: activating Snapshots 1 to 8.
Row 3: Mono, Volume Phones 1, Volume Phones 2, External Input
Lower keys: Talkback, Speaker B, Dim.

A set of stickers with all currently available TotalMix FX commands is included. These can be used to label all keys reflecting the current user configuration.

The rotary encoder wheel is used to change various parameters, like gain and volume. It is programmable in TotalMix FX as well.

Configuration of the ARC USB

The Advanced Remote Control is configured in the Options menu via the Key Commands dialog of TotalMix FX, tab ARC USB Settings. As the ARC does not have any memory, all configuration and storage is done via TotalMix FX. All settings of the ARC USB are stored within a Workspace, and are therefore identical in all Snapshots of that current Workspace.

More than 36 different commands can be assigned to the 15 keys. The behaviour of each individual button can be changed between push, toggle, enable and disable, depending on the base function.

Current list of available functions:

Global Mute
Global Solo
Mute Group 1 to 4
Solo Group 1 to 4
Fader Group 1 to 4
Link Main AB
Speaker B Select
DIM (Main Out)
Mute (Main Out)
Mute FX (Main Out)
Mono (Main Out)
Talkback
External Input
Reverb

Echo
Cue Phones 1 to 4
Snapshot 1 to 8
Layout Preset 1 to 8
Volume Main
Volume Phones 1 to 4
Mic Gain 1, Mic Gain 2, Mic Gain 1+2
Inst. Gain 3, Inst. Gain 4, Inst. Gain 3+4
Mic/Inst. Gain 9, Mic/Inst. Gain 10, Mic/Inst. Gain 9+10
Mic/Inst. Gain 11, Mic/Inst. Gain 12, Mic/Inst. Gain 11+12

Some commands are not available at certain interfaces, or slightly changed due to different functionality. Fireface UFX, UFX II and UFX III have additional commands for DURec: Record, Play and Stop.

Several functions can be activated at the same time. Example: Button 1 is set to Cue Phones 1. That means the phones submix is heard via the Main output (the studio monitors). To be able to also change the volume of the phones submix itself, set button 2 to Volume Phones 1. Activating both will allow you to listen to the phones submix via the main output, and also to change its volume (the fader in the third row) by turning the encoder knob.

A standard footswitch (with switch, sustain pedals with pot are not supported) can be connected to the 1/4" TS jack on the left side. In Key Commands Settings the same options are available for the footswitch as for the 15 keys.

Remote control the RME Fireface UFX III, UFX II, UCX II and 802 FS in Stand-Alone Mode

As mentioned above, the RME Fireface 802 FX, UCX II, UFX II and UFX III interfaces all feature a dedicated connection for the ARC USB, with the remote offering an additional level of control when using either device in Stand-Alone Mode.

When used with any of these interfaces standalone, a fixed set of functions is activated on the keys:
Row 1: Setup 1-4
Row 2: Setup 5-6 x x
Row 3: Mono, Volume Phones 1, Volume Phones 2, DIM
Lower keys: DURec: Rec, Play/Pause, Stop
x = no function

The included stickers also offer the stand-alone layout.

In the 802 FS, UCX II, UFX II and UFX III display's menu the way of operating the ARC USB can be configured for standalone mode. Those options are found under SETUP/REV, Options, Hardware/Diagnosis:

Standalone ARC Volume

Deactivates all keys. Only the encoder wheel works, with a fixed assignment to Main Volume. This option is also a safety function in case the ARC USB is connected to the 802 FS / UCX II / UFX II / UFX III, but operated online (with a computer). When the system goes offline (computer removed, sleep state...) the functions on the keys change, because online mode changed to stand-alone mode. Operating the keys then could activate unintended functionality or changes.

Standalone ARC 1 second operation

Each key has to be pressed for one second to activate the programmed functionality. This safety function prevents unintentional changes. It can be stored within the Setups, activating this mode automatically when such a Setup is loaded. When loading a Setup where this function had not been active this mode is automatically deactivated at the interface.

Notes: Want instant access to three presets for Sunset or Riverside? Or to unlock the full potential of Volante? Connect MultiSwitch Plus with the included 1/4" TRS cable and add a new dimension to your rig.

MultiSwitch Plus can be configured in several different ways to extend floor control of compatible Strymon pedals. Depending on the selected mode and the pedals connected, you can recall presets, change banks, operate TimeLine's looper, remotely tap tempos, and more. Featuring three outputs, MultiSwitch Plus allows you to connect up to three compatible Strymon pedals using additional TRS cables (sold separately). Now you can engage presets on Sunset, Riverside, and Volante simultaneously. Or mix and match the footswitches to set up your own custom operation - such as controlling tap tempo on your Flint, Favorite on your El Capistan, and Boost on your Riverside.

Add a MultiSwitch Plus to your Sunset, Riverside, or Volante and gain instant access to presets 1, 2, and 3. Or connect all three pedals to MultiSwitch Plus using additional TRS cables (sold separately) to access three synchronized presets on all three pedals simultaneously. Connect MultiSwitch Plus to Volante for additional footswitchable control. Use MultiSwitch Plus for remote operation of the SPEED switch, remote transport control, or for additional foot control while in Sound on Sound mode.

Use MultiSwitch Plus to remotely toggle Volante's Speed switch. Instantly alter the speed of the media, changing the fidelity and creating layered multi-octave textures. Volante provides the unique ability to reverse, pause, and infinitely repeat the delayed sounds. MultiSwitch Plus opens the door to even more immediate and expressive control of these functions. MultiSwitch Plus provides remote access to three of Volante's Sound on Sound functions. When in Sound On Sound mode, MultiSwitch Plus allows control over infinite repeats, pause, and reverse functions.

Not only does MultiSwitch Plus give you full control over TimeLine's Looper in a simple, compact format, it also unlocks three additional looping features: Reverse, Half Speed, and Undo/Redo. Use MultiSwitch Plus to control your TimeLine Looper in two different ways. MultiSwitch Plus allows instant access to TimeLine's Record/Overdub, Play, and Stop functions without holding the TAP switch to enter Looper Mode. Easily access looping features while retaining footswitch control over your delay sounds. Hold TimeLine's TAP switch to enter looper mode, and MultiSwitch Plus now gives you instant access to Reverse, Half Speed, and Undo/Redo. Gain access to a versatile, 6-button looper that is excellent for live looping and experimentation.

MultiSwitch Plus provides an alternate way to explore presets and set tempos on your TimeLine, BigSky, and Mobius.

MultiSwitch Plus gives you a new means of exploring preset banks. Use the left switch to move down a bank, right switch to move up a bank, and middle switch to cycle through your presets within the current bank. A great way to explore all of your presets. Use MultiSwitch Plus to recall the perfect preset on your TimeLine, BigSky, or Mobius. Easily scroll through saved presets using the left and right switches, and engage/bypass the preset you have selected with the middle switch. Use MultiSwitch Plus to scroll through your saved presets and control your tap tempo all at once. Perfect for TimeLine and Mobius-use the left switch to scroll down through your saved presets, the right switch to scroll up, and the middle switch to tap in the perfect delay tempo or modulation speed.

Notes: Have an existing Strymon effects pedal power supply? Gain five additional isolated pedal outputs with an Expansion Kit. Easily build a modular power system that can grow with your pedalboard.

Expansion Kits require an existing Strymon power product which connects to an AC power outlet, either directly (Zuma, Zuma R300) or via an external power adapter (Ojai R30, Ojai). Simply link an Expansion Kit to your existing Strymon power product via the 24V jack.

Expansion Kits consist of an isolated power distributor and all of the necessary connection cables to integrate it with your existing Strymon power supply and power up to five additional effects pedals.

Use an Expansion Kit when you need to add more pedals to your Strymon powered pedalboard. Expansion Kits do not come with a power adapter, and will operate only when connected to an existing Strymon power product.

Notes: Have an existing Strymon effects pedal power supply? Gain five additional isolated pedal outputs with an Expansion Kit. Easily build a modular power system that can grow with your pedalboard.

Expansion Kits require an existing Strymon power product which connects to an AC power outlet, either directly (Zuma, Zuma R300) or via an external power adapter (Ojai R30, Ojai). Simply link an Expansion Kit to your existing Strymon power product via the 24V jack.

Use an Expansion Kit when you need to add more pedals to your Strymon powered pedalboard. Expansion Kits do not come with a power adapter, and will operate only when connected to an existing Strymon power product.

Notes: Super solid vinyl record clamp with reduction on 7' records.

This dual-purpose clamp is a perfect solution for any vinyl lover or DJ.

Optimised weight will reduce any vibrations or feedback. This clamp will help to flatten warps records and stabilise the disc.

7' adapter will pull off when big hole record is placed under the clamp.

Each clamp/stabilizer comes with wooden sapeli box - strong magnetic lock

This clamp is precision milled on CNC machine.

Designed for your listening pleasure

Made in EU


Height: 26mm
Diameter: 77mm
Packaging: wooden sapeli box - strong magnetic lock

Notes: The 1-row QUICKSWAP CASE for AE modular is the high-end case for AE modular. It is based on a sturdy metal chassis with a beautiful matte black powder coating and - the key feature of this case - allows to plug in AE modules without any screws! The design makes sure that the modules sit really firm in the case and the bus connection is established automatically by the integrated bus board, so need for the separate bus cable known from the standard AE cases. This means, rearranging your modular system can't be easier!

This case is developed by Kyaa, a great 3rd party AE module developer; tangible waves is producing the case. We are happy about this great cooperation and this marvellous addition to our product range!

With a connector kit, another QUICKSWAP CASE of same width can be attached at certain angles, depending on the connector - and the power supply is linked between the cases also via the connector.

Other utilities, like a handle for carrying a folded case, are coming soon.

Please note: This rack does not include the Master or Power module.
To connect the case to power you have the following options:
install the Master Module
install the Power Module
connect to another, already powered QUICKSWAP CASE
connect to another AE case via the RACKLINK module kit

Notes: DR-05XP

2-Channel 32-Bit Float Portable Handheld Recorder With USB-C Interface

Pro-Quality Portable Recording, Simplified

The TASCAM DR-05XP portable handheld recorder makes it easy to capture pro-quality recordings for music, audio-for-video, meetings, dictation, and more. With 32-bit float recording mode, you'll never need to worry about setting audio levels. With easy one-handed operation, the DR-05XP makes it simple to start recording with minimal setup time.

Capture Pro-Level Recordings Every Time

With its 32-bit float recording mode, the DR-05XP ensures your audio recordings will always be clear, distinct, and free of distortion that could ruin your recording - and you'll never need to worry about setting input levels.

Built-in Condenser Microphones

The DR-05XP features omnidirectional condenser microphones that can withstand high sound pressure levels (up to 125dB SPL), reducing the risk of mic distortion even in loud environments.

Simplicity in Your Palm

With the DR-05XP, the complexities of audio recording are a thing of the past. Easily access every feature from the palm of your hand. Plus, the backlit LCD screen means no squinting; just clear and concise navigation any time of day, in any environment.

Your Portable Recording Studio

The DR-05XP isn't only a powerful portable recorder - it's also a 2-in/2-out USB-C audio interface you can use to record anywhere, directly to audio recording software on your Mac or PC.

Ideal for Musicians

The DR-05XP is a fantastic portable recording solution for musicians with its high-quality microphones, 32-bit float recording, built-in tuner, reverb, overdubbing and more.

On Location

With its compact size, the DR-05XP can travel anywhere for exceptional field recording. Choose from three different low cut filter options for getting rid of unwanted noises. As a companion for video, the DR-05XP can attach easily to tripods and the Auto Tone output for cameras makes post-production a simple task.

Record Anything, Anywhere

From dialogue to vlogs, whether you're in an alley or a recording booth, the DR-05XP captures clear, crisp audio with ease. In addition to the built-in mics, use the stereo mini jack to add microphones with plug-in power or external line inputs to capture audio from any source in mono or stereo. Connect the unit to a computer via USB-C for use as a USB microphone.

Key Features
2-channel portable handheld audio recorder with microSDXC card storage
32-bit float recording mode ensures low-noise, distortion-free recordings
Omnidirectional condenser microphones handle loud environments and sources (up to 125dB SPL)
2-in/2-out USB-C audio interface for recording directly to your computer
Up to 17.5 hours of operation with 2 x AA alkaline batteries
Recording modes include 32-bit float/24-bit/16-bit, 96kHz/48kHz/44.1kHz
microSDXC (up to 512GB) cards can be used as recording media
USB Type-C port
Stereo mini jack for external stereo microphones (provides plug-in power) / External line input
Support multiple menu languages (ENG/FRA/DEU/ITA/ESP/RUS/PRT/JPN/CHI/KOR)
Long recordings as MP3 files possible
Various recording function (Auto rec, Self timer, Pre rec)
Overdubbing function
Limiter and Peak reduction
Three low-cut filter levels (40/80/120Hz)
Auto Tone output for use with DSLR camera
Reverb effect for vocal and instrument resonance
Mark function
128×64 pixel graphic LCD with backlight
Tripod mounting point attaches to any standard tripod
Stereo mini line output and headphone output
Speed change (VSA) function for adjusting the speed from 0.5 to 2.0 times (in 0.1 increments)
Playlist function
Built-in monaural speaker makes it easy to check your recordings
Chromatic tuner for tuning musical instruments before recording

Recorder specifications
Recording media/file systems: microSD cards, microSDHC cards, microSDXC cards (up to 512 GB)
Recording/playback formats
WAV (BWF)
Sampling frequency: 44.1 kHz, 48 kHz, 96 kHz
Quantization bit depth: 16-bit / 24-bit / 32-bit float
MP3
Sampling frequency: 32 / 64 / 96 / 128 / 192 / 256 / 320 kbps
Quantization bit depth: 24-bit / 32-bit float
Maximum number of input channels: 2
Maximum number of recordable tracks: 2

Analog audio input/output ratings
MIC/EXT IN jack (can provide plug-in power)

Connector: 3.5mm (1/8") stereo mini jack
Input Impedance: 18 kO or more (when plug-in power is turned off)
2 kO or more (when plug-in power is turned on)

Nominal input level: - 20 dBV
Maximum input level : -4 dBV

PHONES/LINE OUT jack

Connector: 3.5mm (1/8") stereo mini jack
Output impedance: 12 O
Nominal output level: -14 dBV (10kO loaded)
Maximum output level: +2 dBV (10kO loaded)
Maximum output: 20 mW + 20 mW (32 O load)
Working impedance: 16 - 250O

Built-in Speaker
Output: 0.3W (monaural)

USB
Connector: USB Type-C
Format: USB 2.0 High Speed Mass Storage Class
USB 1.1 Full Speed Audio Class

USB Audio
Sampling rate: 44.1 / 48 kHz
Quantization bit depth: 24-bit
Number of inputs: 2 channels (output from this unit)
Number of outputs: 2 channels (input to this unit)

General

Power
2AA batteries (alkaline or NiMH)
USB bus power (5V/0.5A) from a computer, etc.
TASCAM PS-P520U AC adapter (sold separately)

Power consumption: 1.7 W (maximum)

Weight: 174 g / 0.384 lb (including batteries)
126 g / 0.278 lb (not including batteries)
Operating temperature range: 0 - 40 -C / 32 - 104 -F

Dimensions:
60.5 x 142.3 x 27 mm
2.39 x 5.61 x1.07 inch
(W x H x D, including protrusions)

Included items:

DR-05XP x1
Safety guide (including warranty) x1
TASCAM ID registration guide x1

* WS-11 Windscreen sold separately
* SD card not included

*Note:0 dBV=1 Vrms, 0 dBu=0.775 Vrms

Notes: Varia Instruments' turntable weights feature a smart mechanism: The 7" adapter inside the weight is moveable, as soon as you put the weight on a 7", the adapter will fall down through the big hole of the vinyl. Your record is now centered and stabilized by the TTW10. If you place the kit on a 12" record, the adapter will remain in the rear position and stabilizes your warped records. A sticky rubber mat on the bottom side protects your vinyl and allows you to control the record in a very direct way. The TTW10 comes in a neat printed box with a linen bag to take it out to your gigs.

Notes: HeadRoom headphones are closed-back professional studio headphones designed for serious musicians and audio engineers who demand both sonic accuracy and ergonomic fit. Custom-tuned for enhanced sonic detail and exceptional midrange clarity, HeadRoom headphones provide the accuracy you need for professional monitoring, recording and rehearsing.

The components, accessories, and build quality come together in this premium headphone to deliver superior sound isolation and ultimate comfort at an incredible price.

HeadRoom headphones use a tried-and-true closed-back studio design for added isolation, great for controlling unwanted outside noise while recording, mixing, and editing. The heart of the HeadRoom headphones are the 45mm neodymium drivers that reproduce balanced sound with impressive detail. The ergonomic ear cups and headband pad are designed to easily fit over the ears with extra padding and premium materials to dramatically reduce listening fatigue over long sessions.

All of these features combine with a durable yet lightweight metal frame to support longer-lasting creativity by reducing ear fatigue. HeadRoom headphones ship in a custom, molded case for convenient protection during travel and storage. With detachable straight and coiled cables, extra earpads, and gold 3.5mm jack & 6.35mm TRS adapter, HeadRoom headphones are prepared for any listening experience.

Notes: HeadRoom headphones are closed-back professional studio headphones designed for serious musicians and audio engineers who demand both sonic accuracy and ergonomic fit. Custom-tuned for enhanced sonic detail and exceptional midrange clarity, HeadRoom headphones provide the accuracy you need for professional monitoring, recording and rehearsing.

The components, accessories, and build quality come together in this premium headphone to deliver superior sound isolation and ultimate comfort at an incredible price.

HeadRoom headphones use a tried-and-true closed-back studio design for added isolation, great for controlling unwanted outside noise while recording, mixing, and editing. The heart of the HeadRoom headphones are the 45mm neodymium drivers that reproduce balanced sound with impressive detail. The ergonomic ear cups and headband pad are designed to easily fit over the ears with extra padding and premium materials to dramatically reduce listening fatigue over long sessions.

All of these features combine with a durable yet lightweight metal frame to support longer-lasting creativity by reducing ear fatigue. HeadRoom headphones ship in a custom, molded case for convenient protection during travel and storage. With detachable straight and coiled cables, extra earpads, and gold 3.5mm jack & 6.35mm TRS adapter, HeadRoom headphones are prepared for any listening experience.

Notes: HeadRoom headphones are closed-back professional studio headphones designed for serious musicians and audio engineers who demand both sonic accuracy and ergonomic fit. Custom-tuned for enhanced sonic detail and exceptional midrange clarity, HeadRoom headphones provide the accuracy you need for professional monitoring, recording and rehearsing.

The components, accessories, and build quality come together in this premium headphone to deliver superior sound isolation and ultimate comfort at an incredible price.

HeadRoom headphones use a tried-and-true closed-back studio design for added isolation, great for controlling unwanted outside noise while recording, mixing, and editing. The heart of the HeadRoom headphones are the 45mm neodymium drivers that reproduce balanced sound with impressive detail. The ergonomic ear cups and headband pad are designed to easily fit over the ears with extra padding and premium materials to dramatically reduce listening fatigue over long sessions.

All of these features combine with a durable yet lightweight metal frame to support longer-lasting creativity by reducing ear fatigue. HeadRoom headphones ship in a custom, molded case for convenient protection during travel and storage. With detachable straight and coiled cables, extra earpads, and gold 3.5mm jack & 6.35mm TRS adapter, HeadRoom headphones are prepared for any listening experience.

Review: Blondie’s celebrated early years are finally getting a definitive retrospective with a long-awaited series of box sets, Against The Odds 1974-1982. While a 10xLP super deluxe edition includes all six studio albums - Blondie, Plastic Letters, Parallel Lines, Eat To The Beat, Autoamerican, and The Hunter - this 4xLP limited ed red version is for the rarities heads only, featuring such obscurios as ‘Plaza Sound, Parallel Beats, Coca Cola, and Home Tapes, variants of their better known titles. It’s a feast for the eyes and ears, too, as the edition comes complemented by two books: a 144-page volume with band commentary and essays from producers Richard Gottehrer and Mike Chapman, plus a 120-page discography with rare artwork and memorabilia.

Review: This superbly timed and forever festive three-LP set showcases seasonal funk sounds from 1966 to 970. Holiday fan or not, these tracks, which are mostly original compositions, capture James Brown at the height of his career and rival his best grooves from the era. Packed with bonus tracks and insightful liner notes by Alan Leeds - Brown's former publicist and tour manager - the set offers an unparalleled glimpse into his festive yet funky brilliance and has been mastered and cut by the legendary Kevin Gray. Perfect for anyone who deserves an early dose of timeless, soulful holiday cheer.

Review: What is there left to say about this landmark recording, which captures the heart and soul of pre-revolutionary Cuban music, bringing together veteran musicians whose artistry might have otherwise been lost to time. The result is a stunning blend of son cubano, bolero, danzon and jazz, each track infused with intricate rhythms and heartfelt performances. Flamenco-tinged vocals soar over interwoven instrumentalsieach simple in isolation but collectively forming a rich, textured soundscape. The interplay between piano, guitar and percussion is electrifying, balancing smooth elegance with raw passion. From the hypnotic pulse of 'Chan Chan' to the fiery energy of 'El Cuarto de Tula' and the aching beauty of 'Veinte ANos', the music effortlessly bridges past and present. Moments of exuberance give way to quiet reflection, showcasing the full emotional range of these master musicians. The sharp piano work, the percussive drive and the warmth of the vocal harmonies create an irresistible urge to dance. Even in its most hurried passages, there's an undeniable charmievery note brimming with life. Now presented on a 4xLP gatefold edition, pressed on 180-gram audiophile vinyl and cut at 45 RPM for maximum fidelity, this reissue elevates an already timeless collection. The past lingers in every note, proving that old songs truly do stir old feelings.

Review: Craft Recordings' Miles '54: The Prestige Recordings is an excellent retrospective that has Miles Davis at a transformative period in his career. Spanning 20 tracks, this collection highlights the pivotal year of 1954, where Davis honed his signature sound and emerged as a leading figure in jazz. The album features contributions from luminaries like Sonny Rollins, Thelonious Monk, and Art Blakey, who together elevate the sessions to iconic status. The set includes insightful session notes by Dan Morgenstern and a thoughtful essay by Ashley Kahn, providing historical context and depth. The collection is a journey through Davis' evolving artistry, from the melodic 'Four' to the innovative 'Bags' Groove.' Tracks like 'Walkin'' and 'Oleo' reveal a confident, boundary-pushing musician on the brink of greatness, while his use of the cup mute foreshadows the cool, introspective sound that would define much of his later work. Miles '54 is not just a celebration of a milestone year in Davis' career but also a tribute to the enduring legacy of Prestige Records.