Drum machines

Notes: The VSYSTEM-3 is a complete synth in a case of exactly the size of the Korg Volca synths. t contains the following AE modules:

DRUMKIT (lofi digital drum module):

DRUMKIT 010 consists of 11 8-bit drum sound samples; 6 of them can be triggered in parallel in any combination by the trigger inputs. With a BANK selector knob, different combinations of the 11 samples can be selected. The PITCH knob affects the pitch of all instruments together, and with the REVERSE button the sounds are played backwards - quite a nice effect to be added here and there.
Don't expect high quality from this module - it's by design a nasty, lo-fi drum sound source, but definitely with its own character. Works great together with the analog KICK module.

KICK (analog kick drum):

It has three knobs: PITCH for the overall pitch of the sound; with DECAY the length of the sound can be set and with DRIVE a nice distortion can be added to the sound.
With the pitch decay switch the pitch follows the amplitude, giving a bit different character.
And a trigger button is available to check the sound without an external trigger signal.

SAMPLYR (sample player with micro-SD card, various loop modes, almost unlimited sample length):

The samples are simple 8-bit mono WAV files. Features of the module are:
CV control for pitch with 1V/octave
Gate input
NO (practical) LENGTH LIMIT for the sample playback, because the module plays the samples directly from the memory card
Sample is displayed on the included OLED display
For each sample, following playback parameters can be edited: Sample start/end, loop start/end, loop crossfade, transpose/tune, all this settings are visible in the display and are saved per sample
Different loop modes can be selected: Oneshot, Reverse, Loop forward/reverse/alternating, loop hold (loop remains playing when gate goes to off)
Editing of the different parameters is accomplished with an endless encoder and a small menu
CV control for playback start, loop start, loop length, reverting playback, sample selection
Six buttons can be used for quick switching between six samples of the current folder
Additionally to the audio output, the SAMPLYR provides trigger outputs for loop start point, loop end point, playback end; by this, certain other operations can be triggered at these specific points, e.g. synchronizing to the loop points.
...and all this in a 1-unit AE module!

The sample files are organized as simple folders on the micro SD card named "A"..."Z" and per folder files named "0....wav, 1....wav, ..."

Included with the module is a micro-SD card with some demo samples; and each buyer will receive an update for the factory samples, made by the sound designer "empty vessel" exclusively for the SAMPLYR module (provided as download later in 2024).

The SAMPLYR module is of course not a hi-fi, high quality sampler module due to its 8-bit design. It has the flavour of the early samplers like EMU II, Fairlight CMI IIx, Ensoniq Mirage... The typical, recommended sample rate is 16000 Hz. these samples can be pitched up by approx. 1 1/2 octaves max.

Beyond the 8-bit resolution, the samples can be also encoded as uLaw and aLaw; in this case, the resolution is true 10 bits. For converting your existing samples, the open-source audio editor "Audacity" is great for the conversion and editing process.

Note: The SAMPLYR module is a sample player only; it doesn't offer recording of audio.

MIXER 4-4 (4-channel mixer):

This module consists of:
An audio mixer with 4 inputs and their level knobs
Additional 4 separate inputs that are mixed at full level (especially for mixing CV signals) and a separate output

HEARTBEAT (precise clock source, with BPM setting, and tempo-tapping):

HEARTBEAT is a master clock source for AE modular, with some additional features. The module offers:
Precise BPM setting with an encoder in the range of 30-300 BPM in steps of 0.1 BPM
A graphical display for the tempo and additional info and menu
A big tap button for setting the tempo by tapping it
An illuminated start/stop button
Six independent clock outputs; each of them can be configured by a menu to a time signature between 1/1 to 1/32th plus dotted and triplets.
Inputs for clock, reset and two CV and trigger inputs that can be assigned to different functions
The clock source can be either internal or an external clock (at 1/96th rate which corresponds to MIDI real time

TRIQ164 (4-channel, 16-step trigger sequencer, with repeat/ratched per step):

Four track buttons select the track to be edited; with 16 buttons each step of the track can be activated an is then displayed by an LED.

Stereo Headphone amplifier, 2 IN/OUT sockets via a stereo minijack

It is delivered completely with power wall adapter and patchwires; everything needed to get the modular system started!

This is a REAL modular synth system; all modules can be rearranged and swapped as you like.

Notes: Sonicware's 'neo-hyperactive' drum machine takes a proudly digital approach to rhythm, offering some fascinating creative takes on synthesis and beat making. Create and perform with generative patterns and randomisation.

Supplier's Notes:
CyDrums | Expressive Drum Synthesiser

4D Drum Sound Evolution
22 Custom-Built Sound Structures
Versatile Effects & Flexible Routing
Powerful 8-Track Beat Making
Endless Creative Possibilities

Included:

- CyDrums unit
- 32GB SD card preloaded with many preset programs
- Power Supply Unit
- Warranty
*Batteries, USB cable and the other connection cables sold separately.

4D Drum Sound Evolution

Wavetable x Velocity & Pressure Modulation = 4D Drum Sounds That React, Transform, and Evolve

22 Custom-Built Sound Structures

22 Sound Structures Tailored to Each Instrument for Endless Sonic Possibilities

Versatile Effects & Flexible Routing

Two Insert Effects, Reverb, and Master Effects with Flexible Routing for Versatile Sound Processing

Powerful 8-Track Beat Making

Non-Stop, Intuitive Beat Making Powered by an 8-Track Drum Sequencer

Endless Creative Possibilities

Generative Patterns with Randomization and Probability, Plus Numerous Performance Features incl. VariSpeed and Snip Loop

Wavetable x Velocity & Pressure Modulation = 4D Drum Sounds That React, Transform, and Evolve

CyDrums offers 64 original wavetables, each comprising up to 256 single-cycle waveforms. With full control over start/end positions, playback directions with modes, speed, and curves, the sonic possibilities go far beyond imagination.

22 Sound Structures Tailored to Each Instrument for Endless Sonic Possibilities

CyDrums features 22 sound structures specifically tailored to each instrument, combining dual Wavetables, Noise, and Pulse sources to deliver sounds that range from classic drum machine tones to deep, innovative sonic exploration.
No need to start from scratch

CyDrums offers 520 ready-to-use preset sound patches, covering classic drum machine tones, synth bass, and FX.

Find them quickly with the tag search feature.

Two Insert Effects, Reverb, and Master Effects with Flexible Routing for Versatile Sound Processing

CyDrums delivers five versatile effect routing modes, allowing you to assign any track to specific effects via BUS Routing.

Non-Stop, Intuitive Beat Making Powered by an 8-Track Drum Sequencer

CyDrums boasts a powerful 8-track, 128-step sequencer based on the acclaimed workflow of the Lofi-12 XT. Unlock the freedom to experiment with odd time signatures and evolving polyrhythms.

Store up to 128 patterns per project, enabling you to create complex song arrangements or seamlessly switch patterns during live performances.

Generative Patterns with Randomization and Probability, Plus Numerous Performance Features incl. VariSpeed and Snip Loop

CyDrums empowers your creativity with powerful generative pattern tools.

Randomization lets you craft unique variations per track or control all parts in real time, while Probability allows you to set trigger chances from 25% to 100% for tracks or individual notes-sparking endless possibilities and new musical discoveries.

Seamless Integration with Your Setup

TRS analogue output, digital output via USB, MIDI in/out, and AudioSync for effortless DAW and hardware compatibility.

Compact, Battery-powered, and Built-in Speaker

CyDrums is designed for inspiration anywhere-from your living room to the outdoors.

- A single project contains:
128 patterns (incl. 32 preset patterns)
16 songs
Up to 256 projects can be stored.
- 1,024 sound patches (incl. 520 preset sounds)
- 256 effect patches
- 128 drum kits
- Polyphony: 1 voice per track + USB & External stereo audio
- Realtime non-quantize recording (with MicroTiming edit)
- Directly enter notes for each step when playback is on or off
- Duplicate to extend a sequence
- Copy and paste function for various parameters between tracks
- Parameter Lock function to record parameter settings for each step
- Drum roll with the D-pad
- Play chromatic/scales in Pad mode
- Enter longer notes (Tied notes)
- Diverse Mute features?
- Pattern BPM / Global BPM can be set
- Switching between half-speed and double-speed BPM
- Metronome and pre-count function

Hardware specifications

Pads: 15 velocity-sensitive pads with RGB LEDs

Controllers: Control knob x 5, Directional pad with 2 button controls

Display: 1.5 inch OLED display
Built-in Mic: Mono x1 (Omni-directional, 94dBSPL)

Built-in Speaker: Mono x1 (1.5W 4O)

Audio Inputs
INPUT L/Guitar (Switchable 10k and 1M impedance)
[LINE Gain] PAD: -20dB
[Hi-Z Gain] LOW: 0dB, NORMAL: +10dB, HI: +20dB
INPUT R/Dynamic Microphone
[LINE Gain] PAD: -20dB
[MIC Gain] LOW: 0dB, NORMAL: +28.8dB, HI: +50dB

Audio Outputs
STEREO LINE OUTPUTS (Max +6.5dBV)
*The above jacks are all balanced 1/4" TRS Jack Connectors
PHONES jack (stereo 3.5mm mini jack type)

USB port
micro USB Type-B
[USB Audio] USB 2.0 Full Speed, 48kHz-16bit Input: 2 channels, Output: 2 channels
[USB MIDI]
[Mass Storage Class] USB2.0 High Speed
*For iPhone, Apple Lightning to USB Camera Adapter required separately

MIDI ports
MIDI IN connector (5-Pin DIN type)
MIDI OUT connector (5-Pin DIN type)

Other connectors
SYNC IN jack (mono 3.5mm mini jack type)
SYNC OUT jack (mono 3.5mm mini jack type)
SD card slot (Standard size *Supports SDHC cards up to 32 GB)
DC IN connector

Bottom side hole
1/4-20UNC screw for tripod mount

Size and weight
Width: 147mm | approx. 5.8 inch
Depth: 175mm | approx. 7.8 inch
Height: 46mm | approx. 1.8 inch
Weight: 550g | approx.1 lbs 3.5 oz

Power supply
DC12V output AC adapter (500mA, Inner Diameter: 2.5mm, Outer Diameter: 5.5mm, Polarity: Center +)
Ni-MH AA SIZE Rechargeable Battery or Alkaline AA SIZE Dry Battery x 6
(Alkaline dry batteries life: approx. 4 hours)
*Batteries sold separately

Accessories

32GB SDHC card preloaded with many preset programs
Power Supply Unit
Warranty
*USB cable and the other connection cables sold separately

Notes: Pink version of Soma's typically creative drum machine. Four channels of analogue drum synthesis, unique looping trigger generators, pseudo-random 'Shaos' generator and DSP-based effects.

Supplier's Notes:
PULSAR-23 is an organismic drum machine designed by Vlad Kreimer. It has a semi-modular structure and consists of 23 independent modules. PULSAR can be used for the synthesis of percussion instruments and rhythms, bass and melodic lines, effects and sound landscapes, as well as a source of control voltage and powerful analogue FX processor.

The PULSAR functions in three different modes: stand-alone, MIDI control and CV control. Moreover, all the above features and control modes can work simultaneously in any proportion or combination.

Additionally, PULSAR offers live circuit bending capabilities and the use of the artist's body conductivity to create patches and cross modulations. PULSAR continues the line of organismic synthesizers begun by LYRA-8, but now in the area of percussion instruments.

Please note that Pulsar is an experimental analogue synth that means that it has some small noise and bleeds that can't affect your studio production or live performance but can be hearable in some modes. If you need a perfect silence and isolation of sound modules, it is recommended that you use 100% digital hardware.

What's in the kit:
PULSAR-23
PSU
22 multi-colour cables with alligator clips 65cm
8 multi-colour cables with alligator clips 30cm
High-quality handmade bag for transportation

Notes: Typically creative stuff from Soma Lab, here in a fresh light green colourway. Four channels of analogue drum synthesis, unique looping trigger generators, pseudo-random 'Shaos' generator and DSP-based effects.

Supplier's Notes:
PULSAR-23 is an organismic drum machine designed by Vlad Kreimer. It has a semi-modular structure and consists of 23 independent modules. PULSAR can be used for the synthesis of percussion instruments and rhythms, bass and melodic lines, effects and sound landscapes, as well as a source of control voltage and powerful analogue FX processor.

The PULSAR functions in three different modes: stand-alone, MIDI control and CV control. Moreover, all the above features and control modes can work simultaneously in any proportion or combination.

Additionally, PULSAR offers live circuit bending capabilities and the use of the artist's body conductivity to create patches and cross modulations. PULSAR continues the line of organismic synthesizers begun by LYRA-8, but now in the area of percussion instruments.

Please note that Pulsar is an experimental analogue synth that means that it has some small noise and bleeds that can't affect your studio production or live performance but can be hearable in some modes. If you need a perfect silence and isolation of sound modules, it is recommended that you use 100% digital hardware.

What's in the kit:
PULSAR-23
PSU
22 multi-colour cables with alligator clips 65cm
8 multi-colour cables with alligator clips 30cm
High-quality handmade bag for transportation

Notes: Inspired by vintage drum synths, the unique Seven Sisters creates everything from classic percussion tones through to experimental synth effects. Play via buttons or trigger inputs compatible with widely available sequencers.

Supplier's Notes:
Seven Sisters is a percussion synthesizer with seven voices that aims to capture the essence of late '70s instruments like the Syncussion and Syndrum.

Each voice is equipped with multiple oscillators, noise generators, and filters, providing rich, complex tones beyond the capabilities of the original devices. This allows you to recreate classic sounds or craft more realistic snare, hi-hat, and cymbal effects. The result is a powerful percussion synthesizer that blends the essence of early drum synthesis with modern flexibility.

You can trigger Seven Sisters using the buttons at the bottom of the unit or trigger inputs at the top. It's the perfect companion for your Beatstep Pro, Korg SQ-64, Eurorack, or other trigger sequencers, whether in the studio or on stage.

Notes: The new Multicassa is here, we added a snare channel with five dividers, tree trig out and tree trig input.

T3 input can now accept audio, CV and trig signal, while T2 & T4 only trig signal.

Routing an audio signal to T3 in, will give you the possibility to filter it with the Bongo and Legno channel and also trigger the sound.

A new swing switch, change the internal groove, updated clock in, synch to 2ppqn and 24ppqn. Individual audio out for each sound and a mix out.

Notes: ***B-STOCK: Box opened, product in perfect working order***


The best of both worlds, combining analogue drum circuits with samples and Korg's Multi Engine. Versatile step sequencing, built-in effects and seamless connectivity.

Supplier's Notes:
The introduction of Drumlogue marks a paradigm shift for drum machines. It combines the rich and raw power of analogue, the flexibility and convenience of digital, and the deep customisation of a unique SDK. A heavy-duty dynamic sequencer, powerful effects, and intuitive controls make Drumlogue a must-have in any setup.

The power of analogue

Drumlogue features completely new analogue circuitry from legendary Korg engineer: Junichi Ikeuchi (ARP 2600 M, MS-20 Mini, ARP Odyssey). The depth and richness of its sound is on a whole new level. New analogue circuits for bass drum, snare drum, low tom and high tom provide a solid foundation, and elevate tracks with harmonic richness and a thick low end.

The versaility of digital

Drumlogue has 7 digital parts: 6 sample-based and 1 Multi Engine based. The sample-based parts can play a wide selection of pre-loaded PCM samples alongside imported user samples. These can be easily loaded into Drumlogue by connecting to a computer via USB and simply dragging and dropping into its main memory.

Endless creative potential

The wildly popular Multi Engine from Minilogue XD is made even more powerful: in addition to Variable Phase Modulation (VPM) and Noise generator engines, the Multi Engine in Drumlogue features a new user slot able to play fully-fledged synth voices - providing vast sonic possibilities never before heard on a drum machine.

Custom Synths

Synth voices in Drumlogue are so much more than static waveforms. Custom synths can be built to not only generate sound, but can also draw on built-in filters, LFOs, MIDI controlled polyphony

Exclusive "Nano" plugin

Korg has collaborated with popular plugin developer "Sinevibes" to create a brand new synth plugin for Drumlogue: Nano. This exclusive plugin explores the power behind the newly expanded Multi Engine and gives an incredible first taste of the platform.

"Nano" is a full-fledged virtual analogue synth with a broad array of features and customisable parameters. The synth engine has dual oscillators with optional ring modulation, a 4-pole state-variable filter with soft clipping distortion, built-in EG and built-in multi-waveform LFO.

Sequencing powerhouse

At the heart of Drumlogue is a flexible, easy-to-use, and extremely powerful 64-step sequencer. This makes it easy to create complex patterns and polyrhythms that elevates the music creation process. Innovative features are available including per-step probability, per-step alternate trigger patterns, per-step micro offsets, per-track groove patterns and much more. With the clear OLED display, it's also easy to follow and edit your sequences visually.

Chain mode makes creating long and interesting patterns simple. In loop mode you can switch between several variations to play sequences in new and interesting ways. The Motion and Accent recording functions are fast and intuitive, and if you want to try new things on your track, the randomisation function is there to help you.

Effects and customisation

Drumlogue has high-quality effects across three categories that can be used simultaneously: delay, reverb and master effects. The send amounts for delay and reverb effects are set independently, with multiple return points also available. Master effects add that final polish to the sound and can be bypassed on a per-part basis, meaning it's possible to send the effect to specific audio parts. A sidechain bus is also available to the master effects section.

Drumlogue has an audio input, so you can process other instruments through Drumlogue's effect chain, making it an ideal companion for your studio setup.

Connectivity

With a wide range of I/O, Drumlogue can be integrated seamlessly with your rig. A USB-A port supports connectivity with USB MIDI class-compliant devices, meaning volumes can be controlled with the faders on a nanoKONTROL 2, or sounds triggered by the pads on a nanoPAD 2.
It almost goes without saying that Drumlogue easily syncs with other gear via the MIDI in/out, sync in/out, or via USB MIDI.

Four individual outputs are available, in addition to headphone and main L/R. Any part can be assigned to any output, allowing for expanded routing versatility with external processing and multi-track integration.

Ease of use

Drumlogue is incredibly easy to use - having been designed with simplicity and accessibility in mind. The most important parameters for the main drum parts have dedicated knobs on the front panel for on-the-fly adjustments, as well as dedicated volume pots for each part to speed up the mixing process.

A wide and clear OLED screen coupled with a simple UI and 4 dedicated encoder knobs makes the navigation process fast and smooth.

Design

Unlike other drum machines, Drumlogue's main panel is slanted. This offers superior ergonomics and visibility, while a brushed aluminium body and wooden side panels add to the premium look and feel.

Specifications

Polyphony: 11 voices (*)
(*) User synths may be played polyphonically via MIDI, the actual voice count will depend on the synth's implementation

Sound Engine
Analogue:4
PCM / User samples: 6
Multi-engine(NOISE, VPM, User Synthesizer): 1

Number of Programs (including rhythm patterns): 128 (64 preset programs by factory default)
Effects: Reverb, delay, master

Inputs / Outputs
Headphones
OUTPUT, (L/Mono, R/Audio, Out 1-4)
Sync In/Out
Audio In, MIDI In/Out
USB A (To Device) (Only for MIDI controllers)
USB B (To Host)

Power supply: AC adapter (DC9V)
Dimensions (W × D × H): 317 × 189 × 73 mm/12.48" × 7.44" × 2.87"
Weight: 1.4 kg/3.09 lbs.
Included items: AC adapter, Precautions, Quick Start Guide

Notes: The JMT VDR-1 is a synthesis-based percussion box made for pulsing noise that morphs from jarring bursts to highly tuned drum sounds. The VDR-1 gives the user a flexible drum voice in a small package with CV control of both the filter and the oscillator. Coupled with a capable LFO the VDR-1 is a great drum voice solution, with a no-frills aesthetic perfect for any synthesist from Monolake to Merzbow.

VDR-1 Features

VCO can morph between triangle and swatooth waveform
LFO for modulation of the VCO and VCF
Internal MIC for triggering of VCF and VCO
CV in for modulation of both VCO and VCF

This is a synth drum with a built-in self-oscillating VCF.

It is equipped with a wideband oscillator and has a strong SWEEP effect.

You can create various tones by tapping on the body or with an external trigger (sequencer or piezo).

The oscillator has a thicker sound from highs to lows, and the waveform can be selected as TRIANGLE or SAWTOOTH.

SWEEP is set to be applied very strongly, so adjust it in conjunction with CUT OFF COARSE.

SUSUTAIN Setting of the decay time from the onset of sound

SENSITIVITY TRIGGER (When the plug is inserted into the trigger, the internal trigger of the unit is turned off) is to adjust the input sensitivity of the SENSITIVITY TRIGGER.

LFO.F controls the amount of LFO applied to the filter and LFO.

LFO.O controls the amount of LFO applied to the oscillator.

FINE is a finer pitch control for the oscillator than COARSE.

The RESONANCE oscillates at maximum and the pitch can be changed with the CUT OFF knob.

It can be powered by either a center minus 9V DC or 9V battery.

SYNTH DRUM

self-oscillate VCF with CUT OFF and RESONANCE

VCO triangle - sawtooth waveform

LFO.F LFO level for VCF

LFO.O LFO level for VCO

CV IN.F cvin for VCF

CV IN.O cvin for VCO

SENS. sensitivity for trigger to synth-drum

SWEEP

SUSTAIN

FORM waveform of LFO

RATE rate of LFO

NOISE level to VCO

Runs on DC9V negative center or a 9V battery.

Notes: ***B-STOCK: Box damaged, but product is in excellent condition and in perfect working order***


Updated version of Akai's excellent MPC One features increased storage, WiFi, Bluetooth and a striking new colour scheme. Full standalone beat creation masterpiece.

*** Introducing MPC Stems- March 2024 ***

Akai Professional now introduces the next chapter of sampling innovation and production powered by the groundbreaking MPC Stems bringing sampling into a new chapter.

With MPC Stems, you can access the raw building blocks of any sample or vinyl record, isolating the DNA of any record. Producers can now manipulate the Drums, Bass, Music, and Vocals, opening new creative possibilities.

Akai Professional introduces the ultimate creative workflow with Stems Separation seamlessly integrated into the leading MPC series, powered by MPC 2 Desktop Software.

With MPC Stems, producers and beat-makers can now unlock unmatched sampling creativity by easily isolating drums, bass, music, and vocals from any audio, vinyl recording, or sample revolutionizing the art of sampling.
Experience lightning-fast workflow with superior sound quality, keeping you inspired throughout the creative process.

Slice and isolate samples while maintaining chop regions across each of the four stem layers.

Take complete control with direct manipulation of stem layers from the pads, adjusting volume, pitch, pan, start, and end points with instant responsiveness.

MPC Stems requires MPC 2 Desktop Software running 2.14 or higher, compatible with MPC Live, MPC Live 2, MPC One, MPC One +, MPC X, MPC XSE, MPC Key 37, MPC Key 61, MPC Studio Mk 2 in Controller Mode.

Supplier's Notes:
MPC One +

Standalone MPC with 7" touchscreen / WiFi & Bluetooth

Supercharge your beats

Standalone supercharged

The new MPC One+ brings a jolt of energy to the standalone workflow to enhance creative speed and efficiency. With MPC One+, beatmakers producers to live performers can enjoy the creative journey like never before.

Pure standalone power in your hands

At the heart of MPC One+ is the powerful multi-core processor, the same featured in the flagship MPC X. This isn't a scaled down little brother, but a production unit built with the same DNA for high-level music creation. Instruments, audio, MIDI, and effects processing to bring the music to life. With an upgraded 16GB of internal storage, create and store more of your inspired moments right in MPC One+ for immediate access and recall.

Wireless for the future

New Wi-Fi and Bluetooth connectivity opens a new world of possibilities for your creative workflow. With Wi-Fi, you now have access to Ableton Link 3 to wirelessly connect and sync all your capable devices. Lock patterns and grooves for a mega creation without any cables or connections. Grab your Bluetooth enabled MIDI controller to lay down synths and melodies while your infectious rhythms have you vibing to the beat. Pair with a wireless QWERTY keyboard to search through folders and libraries accurately. With Wi-Fi and Bluetooth, your MPC One+ may be untethered but you are locked right into the music.

The centre of your creativity

MPC One+ is meant to be the focal point of your creative workspace. Whether you need compact, efficient beat-making or expanded interconnected production and composition, MPC One+ is versatile enough to accommodate any need. Connect your studio speakers to Stereo Outputs for accurate monitoring. A pair of Line Level Inputs are ready for keyboards, synths, instruments, hardware processors, and more. Expand your I/O with support for ClassCompliant Devices via a USB A host port. Connect your favorite plug-and-play USB MIDI Controllers, Audio Interface Devices, or removable storage drives, and take your production up another level with ease.

The workflow that sparks inspiration

MPC is the premier platform for all pattern-based music from EDM to Electro, Hip-Hop to House, and beyond. With 128 MIDI and 8 Audio Tracks per project, MPC One can capture any idea just as fast as you can think it. Browse thousands of MPC Plugin Instrument Presets to find that perfect sound to build melodies or shape harmonic phrases with massive sonics. Lay down serious drums and percussion with the signature MPC groove and precision. 16 Levels, Note Repeat, and Time Correct have defined the rhythmic feel for generations and continue to be the foundation for hit song after hit song. Use the pads in combination with Notes and Chords modes to unlock a completely new world of pad performance using the 16 velocity-sensitive RGB backlit pads.

One place for your sounds, samples, and songs

MPC One+ grows with you as you evolve on your music production journey. Update features, sounds, and samples wirelessly thanks to built-in Wi-Fi. When new MPC plugin instruments are available, you'll enjoy instant notifications as well as downloads and software authorizations right from your MPC One+. Browse and sync your curated Splice loops and samples and give your productions a breath of fresh inspiration whenever you need it. Keep all your sounds and instruments right within reach to instantly capture the most inspired moments anytime.

The next step of your MPC journey

MPC One+ is here for the producers and beatmakers ready to take the next step in the journey. Upgrade to MPC One+ from MPC Beats and load your old projects seamlessly on MPC One+. Your MPK mini or other class-compliant controller connects for powerful keyboard control of popular MPC plugin instruments like Hype, Mellotron, or Odyssey. For a limited time, receive a voucher for a free MPC Plugin instrument download from the MPC Store with the purchase and registration of a new MPC One+. MPC One+ has arrived and the musical possibilities ahead of you are endless with the power of its supercharged standalone workflow.

Technical Specifications

Pads
(16) velocity- and pressure-sensitive pads, RGB-backlit
(8) banks accessible via 4 Pad Bank buttons

Knobs
(4) 360- touch-sensitive Q-Link knobs for parameter adjustment
(1) data encoder for value adjustment and selection via push

Buttons
(31) dedicated-function buttons

Display
7.0" / 177 mm (diagonal)
5.9" x 3.7" / 151 x 94 mm (width x height)
Full-colour LED-backlit display with touch interface

Memory
Processor: Quad-core ARMr processor
RAM: 2 GB
Storage: 16 GB (over 7.8 GB available for user storage)

Power via power adapter (12 V, 3.0 A, center-positive, included)

Connections
(2) 1/4" (6.35 mm) TRS inputs (1 stereo pair)
(2) 1/4" (6.35 mm) TRS outputs (1 stereo pair)
(1) 1/8" (3.5 mm) stereo headphone output
(1) 5-pin MIDI inputs
(1) 5-pin MIDI output
(4) 4 TRS CV/Gate Jacks, 8 Outputs Total
(1) USB Type-A port
(1) USB Type-B port
(1) SD Card slot
(1) Power Adapter input

Dimensions (width x depth x height)
10.7" x 10.7" x 2.1"
272 x 272 x 53 mm

Weight
4.7 lbs / 2.1 kg