USDMi Idioma
Mi Divisa
Ayuda
Cómo hacer un pedidoProblemas al hacer un pedidoPreguntas más frecuentesContáctenosContact Us (Suppliers)Acerca de JunoJuno DailyEstrenos de esta semanaDJ & Studio StoreTagsComentariosPolítica de privacidadReturns & refundsCondiciones de usoFinanceJuno Vinyl DistributionJuno Vinyl WholesaleJuno Marketing and PR departmentPromote your label / releases
Filter
Synth Module Accessories
Essentials for any Eurorack modular synth setup, we stock a full range of accessories including patch cables, screws and cases. Our most popular accessories include Befaco’s excellent Knurlies, which make it quick and easy to swap modules without tools. You’ll also find cables and adaptors for MIDI, power supplies and audio signals as well as CV/gate patch cables. Cable holders, blank Eurorack panels and a range of powered Eurorack cases of all sizes complete our selection. Brands like ALM Busy Circuits, 4ms and Doepfer make a wide variety of handy accessories to help make your modular rig complete.
Otros clientes también compraron...
Cat: 807732 Rel: 05 Feb 21
Set of 6 80cm purple patch cables
Notes: A set of 6 Patchwires for AE modular; with a length of 80 cm.
Cable has a soft, flexible silicone insulation, with a gold plated pin.
… Read moreCable has a soft, flexible silicone insulation, with a gold plated pin.
1 in stock $10.82
Otros clientes también compraron...
ALM 6U 84HP Powered Synth Module Enclosure Case (synth module enclosure case)
Cat: 875241 Rel: 26 Apr 22
The cases all feature anodised aluminium construction, an on/off switch, rubber feet, and high quality switched powered bus boards with numerous keyed headers and ample power capacity.
Notes: ALM Eurorack cases are available in a range of sizes all including an integrated powered bus boards.
The cases all feature anodised aluminium construction, an on/off switch, rubber feet, and high quality switched powered bus boards with numerous keyed headers and ample power capacity.
These are simple and compact Eurorack cases, perfect for small, focused systems, taking along on travels, or as a tabletop addition to a larger setup.
Cases are available in 4 sizes; 3U 84HP / 6U 84HP / 3U 52HP / 6U 52HP sizes. They all offer 1 Amp on both the -12V and +12V rails per row.
Great modern cases
The ALM powered Eurorack case was originally designed for the System Coupe. Wider interest has seen it evolve into a range of different sized cases being made available by themselves.
A fixed solid bus board provides quality ample power and plentiful keyed power connectors. The shielded DC/DC power converter is low noise and includes overload and short circuit protection. Fixed, quality mounting rails are used over sometimes frustrating sliding nuts. The case has a great looking all anodised aluminium construction that is both strong and light.
The case proportions are designed to look great on a table or desk (not too deep, just enough) and also be easy to fit in a bag and transport.
Decksaver case covers are available currently for the 3U/84HP, 6U/52HP, and 6U/84HP cases.
6U / 84HP
Provides up to 2 Amp power total on each -12V & +12V rails (1 Amp total per row)
Connections for up to 32 modules.
Includes 5 Amp power 'brick'
… Read moreThe cases all feature anodised aluminium construction, an on/off switch, rubber feet, and high quality switched powered bus boards with numerous keyed headers and ample power capacity.
These are simple and compact Eurorack cases, perfect for small, focused systems, taking along on travels, or as a tabletop addition to a larger setup.
Cases are available in 4 sizes; 3U 84HP / 6U 84HP / 3U 52HP / 6U 52HP sizes. They all offer 1 Amp on both the -12V and +12V rails per row.
Great modern cases
The ALM powered Eurorack case was originally designed for the System Coupe. Wider interest has seen it evolve into a range of different sized cases being made available by themselves.
A fixed solid bus board provides quality ample power and plentiful keyed power connectors. The shielded DC/DC power converter is low noise and includes overload and short circuit protection. Fixed, quality mounting rails are used over sometimes frustrating sliding nuts. The case has a great looking all anodised aluminium construction that is both strong and light.
The case proportions are designed to look great on a table or desk (not too deep, just enough) and also be easy to fit in a bag and transport.
Decksaver case covers are available currently for the 3U/84HP, 6U/52HP, and 6U/84HP cases.
6U / 84HP
Provides up to 2 Amp power total on each -12V & +12V rails (1 Amp total per row)
Connections for up to 32 modules.
Includes 5 Amp power 'brick'
1 in stock $437.11
Otros clientes también compraron...
ALM 3U 52HP Modular Synthesiser Enclosure Case With Power Supply (modular synthesiser enclosure case)
Cat: 875243 Rel: 26 Apr 22
3U 52HP modular synthesiser enclosure case with power supply
Notes: ALM Eurorack cases are available in a range of sizes all including an integrated powered bus boards.
The cases all feature anodised aluminium construction, an on/off switch, rubber feet, and high quality switched powered bus boards with numerous keyed headers and ample power capacity.
These are simple and compact Eurorack cases, perfect for small, focused systems, taking along on travels, or as a tabletop addition to a larger setup.
Cases are available in 4 sizes; 3U 84HP / 6U 84HP / 3U 52HP / 6U 52HP sizes. They all offer 1 Amp on both the -12V and +12V rails per row.
Great modern cases
The ALM powered Eurorack case was originally designed for the System Coupe. Wider interest has seen it evolve into a range of different sized cases being made available by themselves.
A fixed solid bus board provides quality ample power and plentiful keyed power connectors. The shielded DC/DC power converter is low noise and includes overload and short circuit protection. Fixed, quality mounting rails are used over sometimes frustrating sliding nuts. The case has a great looking all anodised aluminium construction that is both strong and light.
The case proportions are designed to look great on a table or desk (not too deep, just enough) and also be easy to fit in a bag and transport.
Decksaver case covers are available currently for the 3U/84HP, 6U/52HP, and 6U/84HP cases.
3U / 52 HP
Provides up to 1 Amp power on each -12V & +12V rails.
Connections for up to 9 modules.
Includes 2 Amp power 'brick'
… Read moreThe cases all feature anodised aluminium construction, an on/off switch, rubber feet, and high quality switched powered bus boards with numerous keyed headers and ample power capacity.
These are simple and compact Eurorack cases, perfect for small, focused systems, taking along on travels, or as a tabletop addition to a larger setup.
Cases are available in 4 sizes; 3U 84HP / 6U 84HP / 3U 52HP / 6U 52HP sizes. They all offer 1 Amp on both the -12V and +12V rails per row.
Great modern cases
The ALM powered Eurorack case was originally designed for the System Coupe. Wider interest has seen it evolve into a range of different sized cases being made available by themselves.
A fixed solid bus board provides quality ample power and plentiful keyed power connectors. The shielded DC/DC power converter is low noise and includes overload and short circuit protection. Fixed, quality mounting rails are used over sometimes frustrating sliding nuts. The case has a great looking all anodised aluminium construction that is both strong and light.
The case proportions are designed to look great on a table or desk (not too deep, just enough) and also be easy to fit in a bag and transport.
Decksaver case covers are available currently for the 3U/84HP, 6U/52HP, and 6U/84HP cases.
3U / 52 HP
Provides up to 1 Amp power on each -12V & +12V rails.
Connections for up to 9 modules.
Includes 2 Amp power 'brick'
1 in stock $219.65
Otros clientes también compraron...
ALM 6U 52HP Modular Synthesiser Enclosure Case With Power Supply (modular synthesiser enclosure case)
Cat: 875246 Rel: 26 Apr 22
6U 52HP modular synthesiser enclosure case with power supply
Notes: ALM Eurorack cases are available in a range of sizes all including an integrated powered bus boards.
The cases all feature anodised aluminium construction, an on/off switch, rubber feet, and high quality switched powered bus boards with numerous keyed headers and ample power capacity.
These are simple and compact Eurorack cases, perfect for small, focused systems, taking along on travels, or as a tabletop addition to a larger setup.
Cases are available in 4 sizes; 3U 84HP / 6U 84HP / 3U 52HP / 6U 52HP sizes. They all offer 1 Amp on both the -12V and +12V rails per row.
Great modern cases
The ALM powered Eurorack case was originally designed for the System Coupe. Wider interest has seen it evolve into a range of different sized cases being made available by themselves.
A fixed solid bus board provides quality ample power and plentiful keyed power connectors. The shielded DC/DC power converter is low noise and includes overload and short circuit protection. Fixed, quality mounting rails are used over sometimes frustrating sliding nuts. The case has a great looking all anodised aluminium construction that is both strong and light.
The case proportions are designed to look great on a table or desk (not too deep, just enough) and also be easy to fit in a bag and transport.
Decksaver case covers are available currently for the 3U/84HP, 6U/52HP, and 6U/84HP cases.
6U / 52 HP
Provides up to 1 Amp power on each -12V & +12V rails.
Connections for up to 9 modules on busboard, with additional 'flying bus board' included that adds up to 12 connectors.
Includes 2 Amp power 'brick'
… Read moreThe cases all feature anodised aluminium construction, an on/off switch, rubber feet, and high quality switched powered bus boards with numerous keyed headers and ample power capacity.
These are simple and compact Eurorack cases, perfect for small, focused systems, taking along on travels, or as a tabletop addition to a larger setup.
Cases are available in 4 sizes; 3U 84HP / 6U 84HP / 3U 52HP / 6U 52HP sizes. They all offer 1 Amp on both the -12V and +12V rails per row.
Great modern cases
The ALM powered Eurorack case was originally designed for the System Coupe. Wider interest has seen it evolve into a range of different sized cases being made available by themselves.
A fixed solid bus board provides quality ample power and plentiful keyed power connectors. The shielded DC/DC power converter is low noise and includes overload and short circuit protection. Fixed, quality mounting rails are used over sometimes frustrating sliding nuts. The case has a great looking all anodised aluminium construction that is both strong and light.
The case proportions are designed to look great on a table or desk (not too deep, just enough) and also be easy to fit in a bag and transport.
Decksaver case covers are available currently for the 3U/84HP, 6U/52HP, and 6U/84HP cases.
6U / 52 HP
Provides up to 1 Amp power on each -12V & +12V rails.
Connections for up to 9 modules on busboard, with additional 'flying bus board' included that adds up to 12 connectors.
Includes 2 Amp power 'brick'
1 in stock $329.48
Otros clientes también compraron...
ALM 52HP 6U Modular Synthesiser Enclosure Case Dust Cover (synth module case dust cover)
Cat: 875252 Rel: 26 Apr 22
Dust cover designed to fit the 52HP 6U modular synthesiser enclosure case
Notes: Dust cover for the ALM 52HP 6U Synth Module Case.
… Read more 1 in stock $58.79
Otros clientes también compraron...
Decksaver Behringer Eurorack Go Dust Cover (modular synthesiser case dust cover)
Cat: 862508 Rel: 10 Mar 22
Smoked polycarbonate cover for Behringer Eurorack Go
Notes: The tools we use to compose and produce music are dear to our hearts.
Dust, liquid and accidental impact have taken many a good modular synth down over the years - this is where Decksaver steps in.
Precision designed and trimmed for a perfect fit, whilst still accommodating cables, the Eurorack Go can sit ready for operation.
This cover is designed with additional clearance for patch cables, meaning you can leave your cables in place when travelling or protecting your modular setup in the studio.
Shields delicate controls and internal components from damage at home, on the road and on stage.
Dimensions
Weight: 1.35kg
Length: 72.6cm
Width: 31.2cm
Height: 8.2cm
… Read moreDust, liquid and accidental impact have taken many a good modular synth down over the years - this is where Decksaver steps in.
Precision designed and trimmed for a perfect fit, whilst still accommodating cables, the Eurorack Go can sit ready for operation.
This cover is designed with additional clearance for patch cables, meaning you can leave your cables in place when travelling or protecting your modular setup in the studio.
Shields delicate controls and internal components from damage at home, on the road and on stage.
Dimensions
Weight: 1.35kg
Length: 72.6cm
Width: 31.2cm
Height: 8.2cm
3 in stock $48.54
Click for better price!
or call +44 20 7424 1960
quote 862508
quote 862508
Otros clientes también compraron...
Analogue Solutions 30cm CV LED Patch Cables (pack of 5) (CV LED Patch Cables)
Cat: 839523 Rel: 28 Jul 21
Pack of 5 30cm CV LED patch cables
Notes: 5 x LED CV cables - mono mini jack- ideal for Eurorack.
These will light red / green as the signal swings from a positive to negative voltage.
The colours are swapped for each end:
Jack 1: red / green (+/-), Jack 2: green / red (+/-).
Expect a very small drop in signal power! Light requires energy! However, in most applications, you will not notice any drop.
The cables are slightly translucent and you can see the core of the cable. Material is a soft touch rubber that is presently flexible.
Plugs are embossed with the words ANALOGUE SOLUTIONS and also the logo.
These don't just look pretty, they have practical advantages too:
Help seeing what's going on in the dark!
Help diagnose signal flow.
… Read moreThese will light red / green as the signal swings from a positive to negative voltage.
The colours are swapped for each end:
Jack 1: red / green (+/-), Jack 2: green / red (+/-).
Expect a very small drop in signal power! Light requires energy! However, in most applications, you will not notice any drop.
The cables are slightly translucent and you can see the core of the cable. Material is a soft touch rubber that is presently flexible.
Plugs are embossed with the words ANALOGUE SOLUTIONS and also the logo.
These don't just look pretty, they have practical advantages too:
Help seeing what's going on in the dark!
Help diagnose signal flow.
1 in stock $54.92
Click for better price!
or call +44 20 7424 1960
quote 839523
quote 839523
Otros clientes también compraron...
Intellijel 4U x 104HP Gig Bag For Palette Case (black) (modular synthesiser case bag)
Cat: 839583 Rel: 20 Sep 21
Clearance to leave your system patched and with a Palette 104 Decksaver Lid attached
Notes: 4U x 104HP Gig Bag (For Palette)
Clearance to leave your system patched and with a Palette 104 Decksaver Lid attached
Padded main compartment protects your case from bumps and scratches
Waterproof zippers
Zipped outer pocket for stuffing accessories and other gear
The rear pocket closes with velcro at the top but unzips at the bottom to become a handle sheath so your case can sit on top of a rolling suitcase.
Super beefy strap connectors with clipped strap
Padded Handle
Lightweight
… Read moreClearance to leave your system patched and with a Palette 104 Decksaver Lid attached
Padded main compartment protects your case from bumps and scratches
Waterproof zippers
Zipped outer pocket for stuffing accessories and other gear
The rear pocket closes with velcro at the top but unzips at the bottom to become a handle sheath so your case can sit on top of a rolling suitcase.
Super beefy strap connectors with clipped strap
Padded Handle
Lightweight
1 in stock $94.30
Click for better price!
or call +44 20 7424 1960
quote 839583
quote 839583
Otros clientes también compraron...
Intellijel Dopp Modular Synthesiser Accessory Bag (modular synthesiser accessory bag)
Cat: 839587 Rel: 20 Sep 21
Accessory bag large enough to hold a Meanwell 90W PSU and IEC Power cable with room to spare
Notes: Accessory bag large enough to hold a Meanwell 90W PSU and IEC Power cable with room to spare.
Extra large zipper
Two inner mesh pockets
Dimensions: 21cm x 4.5cm x 14.5cm (8.25" x 1.75" x 5.75 )
… Read moreExtra large zipper
Two inner mesh pockets
Dimensions: 21cm x 4.5cm x 14.5cm (8.25" x 1.75" x 5.75 )
1 in stock $11.93
Otros clientes también compraron...
Intellijel Tin Large (screw-top container)
Cat: 839602 Rel: 20 Sep 21
Screw-top container for holding mounting screws, adapters, or other special accesories
Notes: Tin - Large
Screw-top container for holding mounting screws, adapters, or other special accesories.
Powdercoated aluminum with silkscreened graphics
Dimensions: Round D68mm x H25mm
… Read moreScrew-top container for holding mounting screws, adapters, or other special accesories.
Powdercoated aluminum with silkscreened graphics
Dimensions: Round D68mm x H25mm
2 in stock $6.38
Otros clientes también compraron...
Befaco Y Splitter Stereo To Mono Splitter Cables (10cm, red/black, pack of 3) (Y stereo to 2x mono splitter cables)
Cat: 842451 Rel: 16 Feb 22
Pack of 3 Y stereo to double mono
Notes: Three units of Befaco's Y splitter cable. Stereo jack 3.5mm plug to 2x mono jack 3.5mm sockets. Black and red colour. 10cms.
… Read more1 in stock $11.93
Otros clientes también compraron...
Empress Effects Zoia Euroburo Case (Empress Effects Zoia Euroburo case)
Cat: 845381 Rel: 17 Sep 21
12v power supply included with the purchase of the desktop enclosure.
Notes: Desktop enclosure case for the Empress Zoia Euroboro- 12v power supply included. Euroboro not included- picture shown for demonstration purposes only.
… Read more 1 in stock $123.13
Click for better price!
or call +44 20 7424 1960
quote 845381
quote 845381
Otros clientes también compraron...
Modbap Modular Shorty Variety Pack Right Angle Patch Cables (mixed colours & sizes) (synth module patch cables)
Cat: 845969 Rel: 04 Nov 21
Patch cables for eurorack.
Notes: Get your patch cables out of the way of your patching with these right-angle patch cables. Pack of 8 cables are available in the Modbap Modular brand colours - blue, pink, black, and white. Lengths are 6inch, 9inch, 12inch, and 18inch.
What's in the package:
2 x 6" (blue)
2 x 9" (pink)
2 x 12" (black)
2 x 18" (white)
… Read moreWhat's in the package:
2 x 6" (blue)
2 x 9" (pink)
2 x 12" (black)
2 x 18" (white)
1 in stock $22.74
Otros clientes también compraron...
Xaoc Devices Erfurt Faceplate (black) (Xaoc Erfurt replacement faceplate)
Cat: 846598 Rel: 27 Apr 22
Optional accessory replacement panel
Notes: Optional accessory replacement panel.
Black anodised alu + heavy duty screen printing.
… Read moreBlack anodised alu + heavy duty screen printing.
1 in stock $23.28
Otros clientes también compraron...
1010 Music 3.5mm TRS Patch Cable (single, 30cm) (TRS patch cable)
Cat: 877194 Rel: 25 May 22
A single black TRS cable with male 3.5mm minijacks on either end of a 30cm/11.75 cable with 1010music printed on the jacks.
Notes: Use these black cables with the 1010music logo on either end of the jack to connect your 1010music eurorack modules to other modules that also use stereo minijack connections. This is a TRS cable with male 3.5mm minijacks on either end. It is available in two lengths: 30cm/11.75" and 60cm/23.5". These cables can be used for connections between any two 1010music modules, and to any other modules that use a compatible mapping of MIDI signals to stereo minijack connectors.
Weight: 0.04 lbs
Dimensions: 4 × 3.5 × 0.25 in
Length: 30 cm / 11.75"
Pack size: single
… Read moreWeight: 0.04 lbs
Dimensions: 4 × 3.5 × 0.25 in
Length: 30 cm / 11.75"
Pack size: single
2 in stock $7.22
Otros clientes también compraron...
1010 Music 3.5mm TRS Patch Cables (pack of 5, 30cm) (TRS patch cable)
Cat: 877200 Rel: 25 May 22
A five pack of black TRS cables with male 3.5mm minijacks on either end of a 30cm/11.75 cable with 1010music printed on the jacks.
Notes: Use these black cables with the 1010music logo on either end of the jack to connect your 1010music eurorack modules to other modules that also use stereo minijack connections. This is a TRS cable with male 3.5mm minijacks on either end. It is available in two lengths: 30cm/11.75" and 60cm/23.5". These cables can be used for connections between any two 1010music modules, and to any other modules that use a compatible mapping of MIDI signals to stereo minijack connectors.
Weight: 0.04 lbs
Dimensions: 4 × 3.5 × 0.25 in
Length: 60 cm / 23.5"
Pack size: 5 Pack
… Read moreWeight: 0.04 lbs
Dimensions: 4 × 3.5 × 0.25 in
Length: 60 cm / 23.5"
Pack size: 5 Pack
1 in stock $30.51
Otros clientes también compraron...
1010 Music Bitbox MK1 & MK2 Replacement Faceplate (black) (replacement faceplate)
Cat: 882303 Rel: 29 Jun 22
Black Faceplate for Bitbox MK1 or MK2
Notes: You can now update your Bitbox mk1 or mk2 with a black faceplate. Now you can have an all black rack and have digital sampling capabilities. This is just the faceplate.
Give your module a facelift
These replacement faceplates are designed for use with the module in the traditional orientation with the screen on top. These are the same faceplates used when manufacturing our modules, but now in black. They are anodized aluminium with a bead blasted finish.
Swapping out a faceplate is easy to do, and requires a small wrench or pliers. Here are the steps to replace a faceplate:
Remove the module from the rack.
Use a small wrench or pliers to remove the small round nuts around each of the mini jacks. Note that these nuts have a notch on the top side of them. This notch fits into a specialized tool that can be used to remove these nuts more easily.
Gently tug on the four knobs to pull them off.
Use a small wrench or pliers to remove the hex nuts from the knob stems.
Remove the washers from the knob stems.
Gently pull up on the faceplate and it will slide off easily.
Place the new faceplate on the module.
Replace the washers on the knob stems.
Use a small wrench or pliers to replace the hex nuts on the knob stems.
Use a small wrench or pliers to replace the small round nuts around each of the mini jacks. Note that the notch should be on the top side of the nuts, the side away from the faceplate.
Look at the underside of the knobs and the post that they rest on. You will see that the knobs are keyed. Line up the flat edge of the hole in the knob with the flat edge of the post, and then push the knob onto the post. If you have the knob aligned properly, it should go on with moderate pressure. If it seems to require more force, please check the alignment.
Weight: 0.19 lbs
Dimensions: 5.5 × 5 × 0.25 in
Touchscreen product: bitbox, fxbox, synthbox, toolbox
… Read moreGive your module a facelift
These replacement faceplates are designed for use with the module in the traditional orientation with the screen on top. These are the same faceplates used when manufacturing our modules, but now in black. They are anodized aluminium with a bead blasted finish.
Swapping out a faceplate is easy to do, and requires a small wrench or pliers. Here are the steps to replace a faceplate:
Remove the module from the rack.
Use a small wrench or pliers to remove the small round nuts around each of the mini jacks. Note that these nuts have a notch on the top side of them. This notch fits into a specialized tool that can be used to remove these nuts more easily.
Gently tug on the four knobs to pull them off.
Use a small wrench or pliers to remove the hex nuts from the knob stems.
Remove the washers from the knob stems.
Gently pull up on the faceplate and it will slide off easily.
Place the new faceplate on the module.
Replace the washers on the knob stems.
Use a small wrench or pliers to replace the hex nuts on the knob stems.
Use a small wrench or pliers to replace the small round nuts around each of the mini jacks. Note that the notch should be on the top side of the nuts, the side away from the faceplate.
Look at the underside of the knobs and the post that they rest on. You will see that the knobs are keyed. Line up the flat edge of the hole in the knob with the flat edge of the post, and then push the knob onto the post. If you have the knob aligned properly, it should go on with moderate pressure. If it seems to require more force, please check the alignment.
Weight: 0.19 lbs
Dimensions: 5.5 × 5 × 0.25 in
Touchscreen product: bitbox, fxbox, synthbox, toolbox
2 in stock $33.00
Otros clientes también compraron...
Cat: 899992 Rel: 27 Sep 22
Premium Gildan 100% cotton black tshirt with large screen printed Modbap square logo and woven logo hem tag.
Notes: Rep your Modbap love with style with these 2 new shirt designs from Modbap Modular! Both shirts feature premium Gildan 100% cotton black t-shirt with large screen printed Modbap logo (either the classic Square logo or the new Inception logo) and woven logo hem tag. Each shirt comes with a wide range of sizes to choose from, from small to triple XL. From long sessions in the studio to live performances, Modbap shirts will keep you comfortable and styled no matter the situation.
… Read more 1 in stock $33.27
Otros clientes también compraron...
Cat: 900017 Rel: 27 Sep 22
Premium Gildan 100% cotton black tshirt with large screen printed Modbap Inception logo and woven logo hem tag.
Notes: Rep your Modbap love with style with these 2 new shirt designs from Modbap Modular! Both shirts feature premium Gildan 100% cotton black t-shirt with large screen printed Modbap logo (either the classic Square logo or the new Inception logo) and woven logo hem tag. Each shirt comes with a wide range of sizes to choose from, from small to triple XL. From long sessions in the studio to live performances, Modbap shirts will keep you comfortable and styled no matter the situation.
… Read more 1 in stock $33.27
Otros clientes también compraron...
Cat: 900022 Rel: 27 Sep 22
Premium Gildan 100% cotton black tshirt with large screen printed Modbap Inception logo and woven logo hem tag.
Notes: Rep your Modbap love with style with these 2 new shirt designs from Modbap Modular! Both shirts feature premium Gildan 100% cotton black t-shirt with large screen printed Modbap logo (either the classic Square logo or the new Inception logo) and woven logo hem tag. Each shirt comes with a wide range of sizes to choose from, from small to triple XL. From long sessions in the studio to live performances, Modbap shirts will keep you comfortable and styled no matter the situation.
… Read more 1 in stock $33.27
Otros clientes también compraron...
TipTop Audio Dual Mantis Studio Bracket Kit (pair, white) (bracket kit for Mantis)
Cat: 895432 Rel: 22 Aug 22
Left and Right bracket, screws, washers, Allen Wrench
Notes: The Dual Mantis Studio Brackets pair lets you connect two Mantis together in a robust and elegant solution. This setup is fixed and is recommend mainly for studio use. The brackets are cut precisely by laser from a sturdy metal and then coated twice for a nice smooth finish that matches the Mantis light gray color. They come with sixteen screws and special washers that help hold the screw in place during assembly and keep a tiny gap between the brackets and the Mantis. Installation is fairly simple and takes about 30 minutes to complete.
Using the optional bracket accessory Mantis can be doubled up to 416HP! Multiply your Mantis and watch your studio setup grow...
Before you begin:
Please get a Phillips head screw driver. It is also recommended to have eight eurorack modules available to help align the Z-Rails but this is not mandatory.
The kit contains:
2 x Brackets, left and right
2 x Adhesive foam strips
12 x Phillips pan head machine screws
12 x Nylon washers
1 x Allen Wrench 3mm
… Read moreUsing the optional bracket accessory Mantis can be doubled up to 416HP! Multiply your Mantis and watch your studio setup grow...
Before you begin:
Please get a Phillips head screw driver. It is also recommended to have eight eurorack modules available to help align the Z-Rails but this is not mandatory.
The kit contains:
2 x Brackets, left and right
2 x Adhesive foam strips
12 x Phillips pan head machine screws
12 x Nylon washers
1 x Allen Wrench 3mm
1 in stock $42.15
Click for better price!
or call +44 20 7424 1960
quote 895432
quote 895432
Otros clientes también compraron...
Buchla CV Banana 100cm Patch Cable (violet) (patch cable)
Cat: 799758 Rel: 30 Nov 20
Violet 100cm patch cable
Notes: Banana cable for modular systems, as used by companies such as Buchla. The length is 101,6 centimeters.
Patch cable with banana plugs.
Length: 101,6 centimeters
Color: Violet
… Read morePatch cable with banana plugs.
Length: 101,6 centimeters
Color: Violet
5 in stock $6.10
Otros clientes también compraron...
Buchla CV Banana 12.5cm Patch Cable (violet) (patch cable)
Cat: 799761 Rel: 30 Nov 20
Violet 12.5cm patch cable
Notes: Banana cable for modular systems, as used by companies such as Buchla. The length is 12.7 centimeters.
Patch cable with banana plugs.
Length: 12.7 centimeters
Color: Violet
… Read morePatch cable with banana plugs.
Length: 12.7 centimeters
Color: Violet
More than 10 in stock $6.10
Otros clientes también compraron...
Buchla CV Banana 25cm Patch Cable (orange) (patch cable)
Cat: 799763 Rel: 30 Nov 20
Orange 25cm patch cable
Notes: Banana cable for modular systems, as used by companies such as Buchla. The length is 25,4 centimeters.
Patch cable with banana plugs.
Length: 25,4 centimeters
Color: Orange
… Read morePatch cable with banana plugs.
Length: 25,4 centimeters
Color: Orange
More than 10 in stock $6.10
Otros clientes también compraron...
Buchla CV Banana 50cm Patch Cable (green) (patch cable)
Cat: 799765 Rel: 30 Nov 20
Green 50cm patch cable
Notes: Banana cable for modular systems, as used by companies such as Buchla. The length is 50,8 centimeters.
Patch cable with banana plugs.
Length: 50,8 centimeters
Color: Green
… Read morePatch cable with banana plugs.
Length: 50,8 centimeters
Color: Green
More than 10 in stock $6.10
Otros clientes también compraron...
Buchla CV Banana Shorting Bar (blue) (shorting bar)
Cat: 799772 Rel: 30 Nov 20
Shorting bar for Buchla synthesizers & modular systems
Notes: Banana Shorting Bar for synthesizers and modular systems made by Buchla.
Shorting Bar with banana plugs. The color may vary.
… Read moreShorting Bar with banana plugs. The color may vary.
4 in stock $6.10
Otros clientes también compraron...
Meng Qi Char Multiple Adapter (multiple adapter)
Cat: 799790 Rel: 30 Nov 20
Passive three-way multiple adapter
Notes: Meng Qi's Char is a unique passive signal multiple, allowing three-way stereo signal multing.
It features a keychain attachment for easy carrying.
… Read moreIt features a keychain attachment for easy carrying.
1 in stock $9.97
Otros clientes también compraron...
Cat: 801473 Rel: 23 Nov 20
Pack of 5 3.5mm patch cables
Notes: Unique custom design 3.5mm patch cables.
They feature strong, ergonomic barrels which are slim and stubby for max patchability.
Available in various lengths (15, 30, 60, 90 & 120cm) and colours.
Longer 60, 90 & 120 lengths also include ALM cable tie.
… Read moreThey feature strong, ergonomic barrels which are slim and stubby for max patchability.
Available in various lengths (15, 30, 60, 90 & 120cm) and colours.
Longer 60, 90 & 120 lengths also include ALM cable tie.
5 in stock $10.54
Otros clientes también compraron...
Cat: 801484 Rel: 10 Nov 21
Pack of 5 3.5mm purple patch cables
Notes: Unique custom design 3.5mm patch cables.
They feature strong, ergonomic barrels which are slim and stubby for max patchability.
Available in various lengths (15, 30, 60, 90 & 120cm) and colours.
Longer 60, 90 & 120 lengths also include ALM cable tie.
… Read moreThey feature strong, ergonomic barrels which are slim and stubby for max patchability.
Available in various lengths (15, 30, 60, 90 & 120cm) and colours.
Longer 60, 90 & 120 lengths also include ALM cable tie.
4 in stock $10.54
Otros clientes también compraron...
Cat: 801490 Rel: 23 Nov 20
Pack of 5 3.5mm white patch cables
Notes: Unique custom design 3.5mm patch cables.
They feature strong, ergonomic barrels which are slim and stubby for max patchability.
Available in various lengths (15, 30, 60, 90 & 120cm) and colours.
Longer 60, 90 & 120 lengths also include ALM cable tie.
… Read moreThey feature strong, ergonomic barrels which are slim and stubby for max patchability.
Available in various lengths (15, 30, 60, 90 & 120cm) and colours.
Longer 60, 90 & 120 lengths also include ALM cable tie.
4 in stock $10.54
Otros clientes también compraron...
Cat: 801501 Rel: 10 Nov 21
Pack of 5 3.5mm yellow patch cables
Notes: Unique custom design 3.5mm patch cables.
They feature strong, ergonomic barrels which are slim and stubby for max patchability.
Available in various lengths (15, 30, 60, 90 & 120cm) and colours.
Longer 60, 90 & 120 lengths also include ALM cable tie.
… Read moreThey feature strong, ergonomic barrels which are slim and stubby for max patchability.
Available in various lengths (15, 30, 60, 90 & 120cm) and colours.
Longer 60, 90 & 120 lengths also include ALM cable tie.
2 in stock $12.49
Otros clientes también compraron...
Cat: 801503 Rel: 20 Nov 20
Pack of 3.5mm green patch cables
Notes: Unique custom design 3.5mm patch cables.
They feature strong, ergonomic barrels which are slim and stubby for max patchability.
Available in various lengths (15, 30, 60, 90 & 120cm) and colours.
Longer 60, 90 & 120 lengths also include ALM cable tie.
… Read moreThey feature strong, ergonomic barrels which are slim and stubby for max patchability.
Available in various lengths (15, 30, 60, 90 & 120cm) and colours.
Longer 60, 90 & 120 lengths also include ALM cable tie.
5 in stock $12.49
Otros clientes también compraron...
Cat: 801514 Rel: 20 Nov 20
Pack of 3.5mm black patch cables
Notes: Unique custom design 3.5mm patch cables.
They feature strong, ergonomic barrels which are slim and stubby for max patchability.
Available in various lengths (15, 30, 60, 90 & 120cm) and colours.
Longer 60, 90 & 120 lengths also include ALM cable tie.
… Read moreThey feature strong, ergonomic barrels which are slim and stubby for max patchability.
Available in various lengths (15, 30, 60, 90 & 120cm) and colours.
Longer 60, 90 & 120 lengths also include ALM cable tie.
2 in stock $12.49
Otros clientes también compraron...
Cat: 801522 Rel: 20 Nov 20
Pack of 3.5mm yellow patch cables
Notes: Unique custom design 3.5mm patch cables.
They feature strong, ergonomic barrels which are slim and stubby for max patchability.
Available in various lengths (15, 30, 60, 90 & 120cm) and colours.
Longer 60, 90 & 120 lengths also include ALM cable tie.
… Read moreThey feature strong, ergonomic barrels which are slim and stubby for max patchability.
Available in various lengths (15, 30, 60, 90 & 120cm) and colours.
Longer 60, 90 & 120 lengths also include ALM cable tie.
5 in stock $13.30
Otros clientes también compraron...
Cat: 801526 Rel: 20 Nov 20
Pack of 5 3.5mm green patch cables
Notes: Unique custom design 3.5mm patch cables.
They feature strong, ergonomic barrels which are slim and stubby for max patchability.
Available in various lengths (15, 30, 60, 90 & 120cm) and colours.
Longer 60, 90 & 120 lengths also include ALM cable tie.
… Read moreThey feature strong, ergonomic barrels which are slim and stubby for max patchability.
Available in various lengths (15, 30, 60, 90 & 120cm) and colours.
Longer 60, 90 & 120 lengths also include ALM cable tie.
2 in stock $10.82
Otros clientes también compraron...
Cat: 801531 Rel: 20 Nov 20
Pack of 60cm black 3.5mm patch cables
Notes: Unique custom design 3.5mm patch cables.
They feature strong, ergonomic barrels which are slim and stubby for max patchability.
Available in various lengths (15, 30, 60, 90 & 120cm) and colours.
Longer 60, 90 & 120 lengths also include ALM cable tie.
… Read moreThey feature strong, ergonomic barrels which are slim and stubby for max patchability.
Available in various lengths (15, 30, 60, 90 & 120cm) and colours.
Longer 60, 90 & 120 lengths also include ALM cable tie.
1 in stock $10.82
Otros clientes también compraron...
Cat: 801541 Rel: 23 Nov 20
Pack of 3 3.5mm green patch cables
Notes: Unique custom design 3.5mm patch cables.
They feature strong, ergonomic barrels which are slim and stubby for max patchability.
Available in various lengths (15, 30, 60, 90 & 120cm) and colours.
Longer 60, 90 & 120 lengths also include ALM cable tie.
… Read moreThey feature strong, ergonomic barrels which are slim and stubby for max patchability.
Available in various lengths (15, 30, 60, 90 & 120cm) and colours.
Longer 60, 90 & 120 lengths also include ALM cable tie.
4 in stock $8.60
Otros clientes también compraron...
Cat: 801545 Rel: 23 Nov 20
Pack of 3 3.5mm purple patch cables
Notes: Unique custom design 3.5mm patch cables.
They feature strong, ergonomic barrels which are slim and stubby for max patchability.
Available in various lengths (15, 30, 60, 90 & 120cm) and colours.
Longer 60, 90 & 120 lengths also include ALM cable tie.
… Read moreThey feature strong, ergonomic barrels which are slim and stubby for max patchability.
Available in various lengths (15, 30, 60, 90 & 120cm) and colours.
Longer 60, 90 & 120 lengths also include ALM cable tie.
1 in stock $10.54
Otros clientes también compraron...
Cat: 801548 Rel: 23 Nov 20
Pack of 3 3.5mm black patch cables
Notes: Unique custom design 3.5mm patch cables.
They feature strong, ergonomic barrels which are slim and stubby for max patchability.
Available in various lengths (15, 30, 60, 90 & 120cm) and colours.
Longer 60, 90 & 120 lengths also include ALM cable tie.
… Read moreThey feature strong, ergonomic barrels which are slim and stubby for max patchability.
Available in various lengths (15, 30, 60, 90 & 120cm) and colours.
Longer 60, 90 & 120 lengths also include ALM cable tie.
5 in stock $10.54
Otros clientes también compraron...
Cat: 801568 Rel: 20 Nov 20
Pack of 2 3.5mm yellow patch cables
Notes: Unique custom design 3.5mm patch cables.
They feature strong, ergonomic barrels which are slim and stubby for max patchability.
Available in various lengths (15, 30, 60, 90 & 120cm) and colours.
Longer 60, 90 & 120 lengths also include ALM cable tie.
… Read moreThey feature strong, ergonomic barrels which are slim and stubby for max patchability.
Available in various lengths (15, 30, 60, 90 & 120cm) and colours.
Longer 60, 90 & 120 lengths also include ALM cable tie.
2 in stock $8.04
Otros clientes también compraron...
Cat: 801574 Rel: 20 Nov 20
Pair of black 120cm 3.5mm patch cables
Notes: Unique custom design 3.5mm patch cables.
They feature strong, ergonomic barrels which are slim and stubby for max patchability.
Available in various lengths (15, 30, 60, 90 & 120cm) and colours.
Longer 60, 90 & 120 lengths also include ALM cable tie.
… Read moreThey feature strong, ergonomic barrels which are slim and stubby for max patchability.
Available in various lengths (15, 30, 60, 90 & 120cm) and colours.
Longer 60, 90 & 120 lengths also include ALM cable tie.
4 in stock $7.24
Otros clientes también compraron...
ALM 3.5mm Mini Jack To Mono 6.35mm (1/4") Jack Cable (jack to jack cable)
Cat: 801678 Rel: 23 Nov 20
Mini jack to mono jack cable
Notes: Mono 3.5mm mini jack to mono 6.35mm (1/4") jack cable.
Useful for connecting eurorack modules (i.e S.B.G.) to external music equipment.
Custom ALM barrel moulding matching ALM's patch cables.
2m length.
… Read moreUseful for connecting eurorack modules (i.e S.B.G.) to external music equipment.
Custom ALM barrel moulding matching ALM's patch cables.
2m length.
1 in stock $9.43
Otros clientes también compraron...
Befaco DIN5 MIDI To TRS Mini-Jack Type B Cable (grey, 1.5m, pack of 3) (DIN to TRS cable)
Cat: 784170 Rel: 07 Dec 20
DIN5 to TRS cable
Notes: 3,5mm TRS to male DIN 5
150cm length
… Read more150cm length
2 in stock $9.97
Otros clientes también compraron...
Befaco DIN5 MIDI To TRS Mini-Jack Type A Cable (red, 1.5m, pack of 3) (DIN to TRS cable)
Cat: 784176 Rel: 09 Nov 20
DIN5 to TRS cable
Notes: 3,5mm TRS to male DIN 5
150cm length
… Read more150cm length
2 in stock $9.97
Otros clientes también compraron...
4ms Pod60 60HP Unpowered Synth Module Enclosure Case (synth module enclosure case)
Cat: 711004 Rel: 12 Dec 18
60HP metal enclosure for Eurorack modules
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.
The Pod60 Unpowered is 60HP with 1.34" (34mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.
… Read moreThe Pod60 Unpowered is 60HP with 1.34" (34mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.
3 in stock $92.63
Click for better price!
or call +44 20 7424 1960
quote 711004
quote 711004
Otros clientes también compraron...
4ms 10 Pin Multi Power Cable (synth module power cable)
Cat: 711993 Rel: 12 Dec 18
Flexible power cable for Eurorack modules
Notes: 10-conductor ribbon cable with three 10-pin connectors and a 16-pin connector on one end (20" total length), for connecting more than 2 modules in a Pod.
… Read more 6 in stock $6.94
Otros clientes también compraron...
Electrosmith M3 Modular synthesiser Screws (black, pack of 50) (synth module screws)
Cat: 714409 Rel: 31 Dec 18
Pack of 50 cross head M3 eurorack screws
Notes: M3 is the original mounting screw as specified by Doepfer in the Eurorack specification. M3 screws are used in cases by Doepfer, TipTop, Intellijel and others.
… Read more 1 in stock $8.04
Otros clientes también compraron...
Electrosmith M2.5 Synth Module Screws (pack of 50) (synth module screws)
Cat: 714419 Rel: 31 Dec 18
Pack of 50 cross head M2.5 eurorack screws
Notes: M2.5 screws have gained popularity in the US with manufacturers such as Elite, Make Noise, and anyone using Vector rails.
… Read more 1 in stock $8.04
Otros clientes también compraron...
Cat: 714422 Rel: 31 Dec 18
10-16 pin power cable
Notes: Standard Eurorack power cable.
Use the 10-16 variant for most modules. 16-16 is for modules that use the internal +5V rail.
Length: 25CM (9.8")
… Read moreUse the 10-16 variant for most modules. 16-16 is for modules that use the internal +5V rail.
Length: 25CM (9.8")
4 in stock $1.10
Otros clientes también compraron...
Xaoc Devices Zadar Black Faceplate (synth module faceplate)
Cat: 718928 Rel: 05 Feb 19
High quality, black anodized & screenprinted panel
Notes: Replacement black panel for XAOC Devices Zadar 1973 quadruple envelope generator module.
No soldering required.
Width: 10HP
… Read moreNo soldering required.
Width: 10HP
1 in stock $36.33
