USDMi Idioma
Mi Divisa
Ayuda
Cómo hacer un pedidoProblemas al hacer un pedidoPreguntas más frecuentesContáctenosContact Us (Suppliers)Acerca de JunoJuno DailyEstrenos de esta semanaDJ & Studio StoreTagsComentariosPolítica de privacidadReturns & refundsCondiciones de usoFinanceJuno Vinyl DistributionJuno Vinyl WholesaleJuno Marketing and PR departmentPromote your label / releases
Synth Module Accessories
Essentials for any Eurorack modular synth setup, we stock a full range of accessories including patch cables, screws and cases. Our most popular accessories include Befaco’s excellent Knurlies, which make it quick and easy to swap modules without tools. You’ll also find cables and adaptors for MIDI, power supplies and audio signals as well as CV/gate patch cables. Cable holders, blank Eurorack panels and a range of powered Eurorack cases of all sizes complete our selection. Brands like ALM Busy Circuits, 4ms and Doepfer make a wide variety of handy accessories to help make your modular rig complete.
Artículos del 1 al 3 de 3 en la página 1 de 1
Otros clientes también compraron...
4ms Pod 104X Powered Synth Module Enclosure Case (synth module enclosure case)
Cat: 1083066 Rel: 05 Jun 25
Low cost, portable 104HP modular enclosure case.
Notes: Pods are a perfect way to get started in Eurorack, or add more modules to your monster system!
Made from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go set ups. The power supply can handle up to 2.0A of +12V, which is plenty of juice for even the most modern digital modules. (Or if you prefer to DIY your power supply, Pods sized at 64hp and below are also available unpowered)
Each Pod104X typically will house up to 13 modules, but more can be accommodated using a multi-power cable accessory.
Mix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Pods can even daisy-chain with the 4ms Row Power system, making them a convenient outboard skiff. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!
… Read moreMade from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go set ups. The power supply can handle up to 2.0A of +12V, which is plenty of juice for even the most modern digital modules. (Or if you prefer to DIY your power supply, Pods sized at 64hp and below are also available unpowered)
Each Pod104X typically will house up to 13 modules, but more can be accommodated using a multi-power cable accessory.
Mix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Pods can even daisy-chain with the 4ms Row Power system, making them a convenient outboard skiff. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!
1 in stock $231.73
Click for better price!
or call +44 20 7424 1960
quote 1083066
quote 1083066
Otros clientes también compraron...
ALM 3U 52HP Modular Synthesiser Enclosure Case With Power Supply (B-STOCK) (modular synthesiser enclosure case)
Cat: 1095730 Rel: 01 Jan 90
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***
ALM Eurorack cases are available in a range of sizes all including an integrated powered bus boards.
The cases all feature anodised aluminium construction, an on/off switch, rubber feet, and high quality switched powered bus boards with numerous keyed headers and ample power capacity.
These are simple and compact Eurorack cases, perfect for small, focused systems, taking along on travels, or as a tabletop addition to a larger setup.
Cases are available in 4 sizes; 3U 84HP / 6U 84HP / 3U 52HP / 6U 52HP sizes. They all offer 1 Amp on both the -12V and +12V rails per row.
Great modern cases
The ALM powered Eurorack case was originally designed for the System Coupe. Wider interest has seen it evolve into a range of different sized cases being made available by themselves.
A fixed solid bus board provides quality ample power and plentiful keyed power connectors. The shielded DC/DC power converter is low noise and includes overload and short circuit protection. Fixed, quality mounting rails are used over sometimes frustrating sliding nuts. The case has a great looking all anodised aluminium construction that is both strong and light.
The case proportions are designed to look great on a table or desk (not too deep, just enough) and also be easy to fit in a bag and transport.
Decksaver case covers are available currently for the 3U/84HP, 6U/52HP, and 6U/84HP cases.
3U / 52 HP
Provides up to 1 Amp power on each -12V & +12V rails.
Connections for up to 9 modules.
Includes 2 Amp power 'brick'
… Read moreALM Eurorack cases are available in a range of sizes all including an integrated powered bus boards.
The cases all feature anodised aluminium construction, an on/off switch, rubber feet, and high quality switched powered bus boards with numerous keyed headers and ample power capacity.
These are simple and compact Eurorack cases, perfect for small, focused systems, taking along on travels, or as a tabletop addition to a larger setup.
Cases are available in 4 sizes; 3U 84HP / 6U 84HP / 3U 52HP / 6U 52HP sizes. They all offer 1 Amp on both the -12V and +12V rails per row.
Great modern cases
The ALM powered Eurorack case was originally designed for the System Coupe. Wider interest has seen it evolve into a range of different sized cases being made available by themselves.
A fixed solid bus board provides quality ample power and plentiful keyed power connectors. The shielded DC/DC power converter is low noise and includes overload and short circuit protection. Fixed, quality mounting rails are used over sometimes frustrating sliding nuts. The case has a great looking all anodised aluminium construction that is both strong and light.
The case proportions are designed to look great on a table or desk (not too deep, just enough) and also be easy to fit in a bag and transport.
Decksaver case covers are available currently for the 3U/84HP, 6U/52HP, and 6U/84HP cases.
3U / 52 HP
Provides up to 1 Amp power on each -12V & +12V rails.
Connections for up to 9 modules.
Includes 2 Amp power 'brick'
1 in stock $217.58
Otros clientes también compraron...
TipTop Audio Mantis 2x104HP Modular Synthesiser Enclosure Case (all black, UK power supply) (B-STOCK) (modular synthesiser enclosure case)
Cat: 1093715 Rel: 01 Jan 90
B-STOCK: Box opened, product unused & in perfect condition
Notes: ***B-STOCK: Box opened, product unused & in perfect condition***
Mantis have taken years of experience with Eurorack to create a low-cost case that makes the Eurorack modular synthesizer look, work, and feel like a professional instrument. Mantis is an instrument that is at home on stage, touring, or in the center of the studio.
Mantis has two rows of 104HP for you to rack your modules. It comes fully powered and assembled, just drop in your modules and play.
Using its sophisticated leg mechanism, you can set it to three different positions: 0, 45, and 90 degrees.
Power Power and more Power! With Mantis, say bye-bye to the tedious, never-ending calculation of current consumption for the i12V power. Mantis comes with a juicy Zeus power supply that delivers plenty of power both now and for the future.
Mantis deep black coloru gives you another option to customize your Eurorack look and matches perfectly with black Tiptop Audio modules.
Mantis comes with real Z-Rails made according to Eurorack enclosure standards. No sliding nuts or wrong spacing! It also has keyed power connectors to help protect your modules from damage from plugging the power in in reverse.
Weighing only 3kg/6.5lb, Mantis is so light, traveling has never been so relaxed.
Dual Mantis Studio Brackets
Using the optional bracket accessory Mantis can be doubled up to 416HP! Multiply your Mantis and watch your studio setup grow.
… Read moreMantis have taken years of experience with Eurorack to create a low-cost case that makes the Eurorack modular synthesizer look, work, and feel like a professional instrument. Mantis is an instrument that is at home on stage, touring, or in the center of the studio.
Mantis has two rows of 104HP for you to rack your modules. It comes fully powered and assembled, just drop in your modules and play.
Using its sophisticated leg mechanism, you can set it to three different positions: 0, 45, and 90 degrees.
Power Power and more Power! With Mantis, say bye-bye to the tedious, never-ending calculation of current consumption for the i12V power. Mantis comes with a juicy Zeus power supply that delivers plenty of power both now and for the future.
Mantis deep black coloru gives you another option to customize your Eurorack look and matches perfectly with black Tiptop Audio modules.
Mantis comes with real Z-Rails made according to Eurorack enclosure standards. No sliding nuts or wrong spacing! It also has keyed power connectors to help protect your modules from damage from plugging the power in in reverse.
Weighing only 3kg/6.5lb, Mantis is so light, traveling has never been so relaxed.
Dual Mantis Studio Brackets
Using the optional bracket accessory Mantis can be doubled up to 416HP! Multiply your Mantis and watch your studio setup grow.
1 in stock $339.67
Artículos del 1 al 3 de 3 en la página 1 de 1
