100% Compra Segura

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Compra Segura

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Synth module accessories

Inicio  Equipment  

Synth module accessories

Options
Artículos del 1 al 16 de 16 en la página 1 de 1
Subscribe to our weekly Studio Equipment emails
4ms Pod 20 Powered Eurorack Module Enclosure Case
Cat: 706834 Rel: 12 Dec 18
 
20HP metal enclosure for Eurorack modules with built-in power supply
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod20 is 20HP with 1.34" (34mm) of available module depth. The built-in power supply has two power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod20 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.
Read more
MRP:$120.14 SAVE 22%
 4 in stock $93.44
Click for better price!
or call +44 20 7424 1960
quote 706834
4ms Pod 26 Unpowered Eurorack Module Enclosure Case
Cat: 706836 Rel: 12 Dec 18
 
26HP metal enclosure for Eurorack modules
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod26 Unpowered is 26HP with 1.34" (34mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.
Read more
MRP:$73.42 SAVE 29%
 2 in stock $52.27
Click for better price!
or call +44 20 7424 1960
quote 706836
4ms Pod 32 Unpowered Eurorack Module Enclosure Case
Cat: 706839 Rel: 12 Dec 18
 
32HP metal enclosure for Eurorack modules
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod32 Unpowered is 32HP with 1.34" (34mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.
Read more
MRP:$78.76 SAVE 18%
 1 in stock $64.52
4ms Pod 34X Unpowered Eurorack Enclosure Case
Cat: 769784 Rel: 20 Mar 20
 
eurorack enclosure case
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod34X is 34HP wide and has extra room to fit even the deepest modules (2.16" / 55mm of available module depth). No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.

Pods are a perfect way to get started in Eurorack, or add a couple more modules to your monster system!

Made from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go set ups. Mix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!

Basic Features:

34 HP Eurorack modular space
Standard M3 threaded holes
100% lightweight anodized aluminum

Exterior dimensions:
Width: 177.3mm (6.98")
Height: 159.5mm (6.28")
Depth: 57mm (2.24")
Interior dimensions:
Max module depth: 55mm (2.16")
Module width: 34HP
Weight:
0.3 kg = 10 oz
Read more
MRP:$85.43 SAVE 17%
 1 in stock $71.19
Click for better price!
or call +44 20 7424 1960
quote 769784
4ms Pod 40X Unpowered Eurorack Module Enclosure Case
Cat: 725503 Rel: 12 Apr 19
 
Portable, compact enclosure that turns Eurorack modules into table-top instruments
Notes: The Pod40X Unpowered is 40HP with 2" (51mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.
Read more
MRP:$92.11 SAVE 18%
 1 in stock $75.65
Click for better price!
or call +44 20 7424 1960
quote 725503
4ms Pod 48X Unpowered Eurorack Enclosure Case
Cat: 725518 Rel: 12 Apr 19
 
Portable, compact enclosure that turns Eurorack modules into table-top instruments
Notes: The Pod40X Unpowered is 48HP with 2" (51mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.
Read more
MRP:$97.45 SAVE 18%
 2 in stock $80.09
Click for better price!
or call +44 20 7424 1960
quote 725518
4ms Pod 60 Unpowered Eurorack Module Enclosure Case
Cat: 711004 Rel: 12 Dec 18
 
60HP metal enclosure for Eurorack modules
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod60 Unpowered is 60HP with 1.34" (34mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.
Read more
MRP:$104.12 SAVE 18%
 2 in stock $85.66
Click for better price!
or call +44 20 7424 1960
quote 711004
4ms Pod 64X Unpowered Eurorack Enclosure Case
Cat: 769793 Rel: 20 Mar 20
 
eurorack enclosure case
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod64X Unpowered is 64HP with 2.16" (55mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.

Pods are a perfect way to get started in Eurorack, or add a couple more modules to your monster system!

Made from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go set ups. Mix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!

Basic Features:

64 HP Eurorack modular space
Standard M3 threaded holes
100% lightweight anodized aluminum

Includes:

64HP Pod, black anodized aluminum
M3 x 8mm pan-head screws, stainless steel (20)
Adhesive rubber feet (4)
Unpowered: requires you to provide your own Eurorack power system
Exterior dimensions:
Width: 329.7mm (12.98")
Height: 159.5mm (6.28")
Depth: 57mm (2.24")
Interior dimensions:
Max module depth: 55mm (2.16")
Module width: 64HP
Weight:
0.42 kg = 14.9 oz
Read more
MRP:$109.46 SAVE 17%
 1 in stock $91.21
Click for better price!
or call +44 20 7424 1960
quote 769793
Behringer 3 Tier Eurorack Module Stand Case
Cat: 780468 Rel: 20 Oct 20
 
module stand case
Notes: Behringer Eurorack Stand 3-Tier; desktop stand for mounting up to 3 Eurorack 104 cases (item 463669), or 3 Behringer synthesizers (e.g. Pro-1, Wasp Deluxe, K-2, Neutron, Model D, Cat).

Variable width (70 HP, 80 HHP or 104 HP); rugged aluminum/steel construction.
Read more
 More than 10 in stock $71.19
Click for better price!
or call +44 20 7424 1960
quote 780468
Behringer 3 Tier Eurorack Module Stand Case (B-STOCK)
Cat: 799732 Rel: 20 Oct 20
 
B-STOCK: Box dented, product unused & in perfect condition
Notes: ***B-STOCK: Box dented, product unused & in perfect condition***


Behringer Eurorack Stand 3-Tier; desktop stand for mounting up to 3 Eurorack 104 cases (item 463669), or 3 Behringer synthesizers (e.g. Pro-1, Wasp Deluxe, K-2, Neutron, Model D, Cat).

Variable width (70 HP, 80 HHP or 104 HP); rugged aluminum/steel construction.
Read more
 5 in stock $68.68
Doepfer A-100MNT Mini Power Supply & Bus Board For Eurorack
Cat: 755435 Rel: 12 Nov 19
 
Miniature PSU/bus board
Notes: The A-100 MNT (Mini power supply/bus) is composed of a miniature power supply and system bus, with connectors for four modules. It's designed to be used with a small set-up of just a few modules, in your own custom-designed case. The idea is that then you can use individual A-100 modules - for instance the filters, the filterbank, frequency shifter, sampler, MIDI interface, etc. - as free-standing pieces of equipment, which can easily be integrated with your other instruments or recording equipment.

The power supply provides the usual A-100 system requirements of +12 V and -12 V, and an additional +5 V supply, for the few modules (for instance A-190, A-191) which need it. The maximum current loading capacity totals 100 mA for +/- 12 V and/or 50 mA for the +5 V supply.

The system bus provides connections for four System A-100 modules. As well as the power supply, it also carries "INT.CV" and "INT.GATE" connections (see A-100 manual, main introduction, chapter 3, 'The A-100 signal flow'.).

The A-100 MNT is supplied as standard with an external power supply, which has to be connected to the socket on the MNT's circuit board.
Read more
 1 in stock $53.38
Click for better price!
or call +44 20 7424 1960
quote 755435
Endorphin.es Strong Zero Core 16 Pin DIP IC Chip VCO Core Replacement For Furthrrrr Generator
Cat: 617808 Rel: 30 Jun 16
 
Replacement 16-pin VCO core chip for Furthrrrr Generator
Notes: - 16-pin DIP IC chip-VCO core replacement that works with any Furthrrrr Generator

- Expands the Furthrrrr Generator with linear trhu-zero FM for obtaining new timbres - deeper, metallic timbres, entirely new sphere of sounds from light whistles to weird noises
Read more
MRP:$88.10 SAVE 26%
 2 in stock $65.62
Koma Elektronik Field Kit Sensor Pack A (set of 5 sensors)
Cat: 725945 Rel: 25 Mar 19
 
Sensor Pack A - features five useful components for owners of the Field Kit
Notes: The Field Kit Sensor Pack A consists of 5 sensors:

- Button/Jack
- Electret Microphone
- Light Sensor
- Temperature Sensor
- Ball Switch
- 2 x Dupont 3 contact cable to connect the Sensors to the Field Kit

Button/Jack:

This is rather a utility tool than an actual sensor. It allows you to either use a pushbutton or any CV-Signal (0- 5V) as a signal source. You can select to either use the button or any signal connected to the jack input with the jumper located right next to pin-header. The voltage present at the output upon a button press can be selected with the two jumpers next to the button. The button and jack can be used with both the ANALOG IN and the DIGITAL IN of the Field Kit's Sensor Interface.

Electret Microphone:

The electret microphone provides a simple solution to use your surroundings as a sample source. The board features a little trimmer to adjust the gain of the microphone pre-amplifier. Use a little screwdriver to adjust the gain according to the printing on the sensor board. It's preferable to adjust the signal level with the trimmer first and only use the level pot of the analog signal interface as a second adjustment stage. The electret microphone has an omnidirectional directivity and is capable of capturing the whole frequency spectrum from 20 to 20000 Hz. The electret microphone is best be used with the ANALOG IN of the Field Kit's Sensor Interface.

Light Sensor:

The light sensor will change the output voltage depending on the light intensity. The spectral sensitivity is similar to the human eye, covering the full spectra of visible light, with a peak at 570nm (green/yellow). The change of the voltage according to the light intensity can be set with the three jumpers on the board. Set those jumpers according to printing on the board. The light sensor can be used with the ANALOG IN and the DIGITAL IN of the Field Kit's Sensor Interface.

Temperature Sensor:

The temperature board features two output modes: a continuous CV or a trigger.

CV Mode: The board will output a continuous voltage in range 0 - 5 V depending on the measured temperature and scaled to the set lower and upper temperature limit.

Trigger Mode: The board will generate a trigger whenever the measured temperature rises above the set upper limit temperature. LED 1 will blink whenever a trigger is generated. The sensor covers a temperature range from -55-C to +125-C.

Ball Switch:

The ball switch consists of a little bouncy ball jumping around in a container connecting two contacts and thus acts like a switch. In contrary to a normal push button, which has very well defined states, the switching of a ball switch is more similar to a percussion shaker. There are two resting-positions which define a certain state of the switch: the board is lying flat on the table with its bottom facing the table: the switch is open the board is lying flat on the table with its top facing the table: the switch is closed. The voltage assigned to those states can be set with the two jumpers on the board. Refer to the printing on the board to identify the position that suits your needs. The ball switch can be used with the ANALOG IN and the DIGITAL IN of the Field Kit's Sensor Interface.
Read more
 4 in stock $55.61
Click for better price!
or call +44 20 7424 1960
quote 725945
Koma Elektronik Field Kit Sensor Pack B (set of 3 sensors)
Cat: 725946 Rel: 25 Mar 19
 
Sensor Pack B - features three useful components for owners of the Field Kit
Notes: The Field Kit Sensor Pack B consists of 3 sensors:

- Accelerometer
- Capacitive Touch
- Sequential Voltage Source
- 2 x Dupont 3 contact cable to connect the Sensors to the Field Kit

Accelerometer:

This board measures acceleration along three axis. Those measurements are used to generate CV signals or triggers. The accelerometer board features three modes:

- Tap Detector with continuous CV output
- Tap Detector with trigger output
- The 'motorcycle mode'

Capacitive Touch:

Connect the Capacitive Touch to organic items and use them as a controller, the Field Kit Sensor Interface will send out signals once you touch the matter. Banana rock, Cucumber Swing, Avocado Samba!

Sequential Voltage Source:

The Sequential Voltage Source is a little magical module which you can use in your musical setup quite easily and allows your Field Kit to become a Sequencer too. This board has three different modes: Stepped Random Voltage, CV Sequencer and a Euclidean Trigger Sequencer.
Read more
 5 in stock $51.17
Click for better price!
or call +44 20 7424 1960
quote 725946
Tiptop Audio Tape Echo ZDSP Cartridge
Cat: 733659 Rel: 21 Oct 19
 
Z-DSP tape echo effects card
Notes: TAPE ECHO by Tiptop Audio brings classic tape-based delays to the Z-DSP effects library. Eight expressive algorithms which emulate analogue tape machines and the producers that inspire Tiptop Audio.

With Tape Echo you can do it all - recreate space echo dub sound of Lee "Scratch" Perry and King Tubby or dig deep into the gritty and endless saturated repeats favoured by dub experimenters like Basic Channel and Boards of Canada.

So wide in its functionality, playability and natural in its sound, Tape Echo sits comfortably amongst the greats of the Roland RE-201 Space Echo, Copycat and Maestro Echoplex all while having a unique character of its own.

From wobbly tape to stereo pong, Tape Echo comes with a multitude of expressive settings and presets that allow you to recreate virtually any style of analogue echo or magnetic tape delay or invent your own sound when you adjust the fidelity of the Z-DSP clock!

Tape Echo for the Tiptop Audio Z-DSP is a joy to use. Precision control of the Frequency, Filter and Feedback are clear to read with the Z-DSP display, plus corresponding controls make setting delay times by ear easy and fun to do like its predecessors.
Read more
 2 in stock $68.80
Tiptop Audio ZVERBZ The Spatial Card Bundle For Z-DSP Module (bundle of 70's, 80's & 90's card)
Notes: ZVERBZ is a collection of new stereo reverb algorithms for the Z-DSP. They range from typical reverbs to more complex effects that combine delay and pitch shifting with reverb. The effects are grouped by decades based on either the era an algorithm was introduced or the time when the effect was most popular. This variety of reverbs covers small to epic size spaces with the addition of shimmering, feedback tunneled pitch shifting, tape delay drivers, gated reverbs and a lot more. Analog clocking of the DSP chip and CV over the parameters enables even more experimentation. This is a collection inspired by the best from the past right at your fingertips.

Please note: The Z-DSP module is not included with this purchase- it is for demonstration purposes only.

Read more
MRP:$92.11 SAVE 11%
 1 in stock $82.31
Click for better price!
or call +44 20 7424 1960
quote 794121
Artículos del 1 al 16 de 16 en la página 1 de 1

Filter

Synth module accessories
Accesorios
Release Date
Featured
Close