Studio mixers

Notes: Small Just Got Very Big

The LiveTrak L6 is Zomo's most compact and portable digital mixer / recorder. With 10-tracks of studio quality audio, effects, MIDI, and sound pads, it's perfect for bands, synth players, live streaming, and more.

Full Featured Mixer

Don't let its size fool you. The L6 is designed with big mixer capabilities; a full channel strip for each track including aux sends, pan, effects, and a 3-band mid-sweepable EQ.

Powerful Multi-Track Recording

The L6 records 10 discrete tracks plus the full stereo mix on microSD cards up to 2TB. Share the live mix, or transfer your stems to your favorite DAW for editing and mixing.

MIDI Connectivity for Synths and Keyboards

Connect, program, and sync the L6 to your outboard gear via the 3.5mm MIDI I/O, or to a computer via USB.

Map parameter controls such as volume, pan, and EQ to outboard gear
Trigger sound pads and scene switching
Tempo sync delay and echo

Features

10-channel ultra-Compact digital mixer
2 XLR/TRS Combo inputs + 4-Stereo inputs
12-track simultaneous recording
MIDI In/Out for mixer control and USB MIDI interface
3 Scene memory for storing mixer and tempo setting
32-bit float multi-track recording to micro SD card
5 Internal Send Effects
2 AUX send outputs
4 Assignable sound pads (sample player)
3-Band EQ with MID freq control for each channel
Headphone output + Master output
Eurorack compatible
12-in / 4-out Audio interface
4 AA battery power operation or USB power

Specs
Input and output channels
Inputs MIC/LINE (mono) 2
LINE (stereo) 4
Outputs
AUX SEND (mono): 2
MASTER (stereo): 1
MONITOR (stereo): 1

Inputs

MIC/LINE:
Connectors: 2 XLR/TRS combo jacks (XLR: 2 HOT, TRS: TIP HOT)
Input gain: Adjustment unnecessary (dual A/D converter circuits used)
Input impedance:XLR: 3.8 kO or more, TRS: 39 kO or more
Maximum input level XLR: +4 dBu, TRS: +24 dBu
Phantom power: +48 V, Channel total of 10 mA or less

LINE

Connectors: 8 TS phone jacks (unbalanced)
Input impedance: 10 kO
Maximum input level: +9 dBu

Outputs

AUX SEND
Connectors: 2 TRS phone jacks (impedance balanced)
Maximum output level: +9.5 dBu
Output impedance: 147 O

MASTER
Connectors: 2 TRS phone jacks (balanced)
Maximum output level: +15 dBu
Output impedance: 147 O

MONITOR
Connector: TRS phone jack
Maximum output level: 50 mW + 50 mW (63 O load)
Output impedance: 14.7 O

Buses

MASTER: 1
AUX SEND: 2
SEND EFX: 1

Channel strip

3 BAND EQ:
HIGH: 10 kHz, +/-15 dB, shelving
MID: 100 Hz - 8 kHz, +/-15 dB, peaking
LOW: 100 Hz, +/-15 dB, shelving

Level meters: 6 segments
Send effects: 5 types

Recorder

Maximum simultaneous recording tracks: 12
Maximum simultaneous playback tracks: 2
Recording formats: 48 kHz, 32-bit float, mono/stereo WAV
Recording media: microSDHC memory cards (Class 10 or higher), microSDXC memory cards (Class 10 or higher)

Audio interface

Input and output channels: Input: 12 channels, Output: 4 channels
Sampling frequency: 48 kHz
Bit depth: 32-bit float / 24-bit
Interface: USB 2.0

Card reader: Mass storage class USB 2.0 High Speed
Sampling frequency: 48 kHz
Frequency response: 20 Hz - 20 kHz / -1.0 dB
Equivalent input noise: -120 dBu or less (IHF-A) at 150O input

Power
4 AA batteries - Alkaline, Lithium, or Rechargeable NiMH
AC adapter: ZOOM AD-17 : DC 5V/1A
USB bus power is supported.

Estimated continuous recording time using batteries
Alkaline batteries: About 3 hours
NiMH batteries (1900 mAh): About 3.5 hours
Lithium batteries: About 7 hours

12-track recording, phantom power off, headphones used (63O load), no MASTER output connections
These values are approximate.
Continuous battery operation times were determined using in-house testing methods.
They will vary greatly according to use conditions.

Power consumption 5 W maximum
Dimensions: 223 mm (W) × 114 mm (D) × 46.5 mm (H)
Weight (main unit only): 526 g
Weight (including batteries): 618 g
Note: 0 dBu = 0.775 Vrms

Notes: White version of Rode's user-friendly, all-in-one production studio. Aimed at podcasters and content creators, the RodeCaster Duo makes it easy to achieve great results.

*** Software update October 2024 ***

Introducing a massive update for the RODECaster Pro II and RODECaster Duo - virtual devices have landed!

This new feature allows users to treat their software as if it were a microphone connected to their RODECaster. This means they can assign each app to a fader and individually apply effects and processing, create custom routing and record them individually.

This update is currently available in beta, with a full public release coming soon. To access virtual devices whilst in beta, users will need to join the RODECaster Beta Program.

Supplier's Notes:
The RODECaster Duo is the ultimate compact audio solution for podcasters and content creators. Combining revolutionary features with superior sound quality, endless customisability and unmatched ease of use, the RODECaster Duo is all you will ever need to record incredible audio for your content.

Everything You Need to Sound Spectacular:

The RODECaster Duo is the world's most powerful all-in-one audio production solution. Condensing a complete professional broadcast studio into a compact and intuitive console, it gives you everything you need to sound spectacular, whether you're podcasting, streaming or creating any kind of content. Loaded with cutting-edge next-gen features and supercharged by a high-performance quad-core audio engine, this is all you need to produce exceptional content.

Incredible Audio, Incredibly Easy:

The RODECaster Duo is incredibly simple to navigate with its large high-definition touchscreen, tactile rotary encoder and broadcast-quality faders giving you hands-on control over every aspect of your sound. Get your project set up in seconds, and with professionally tailored presets and the intuitive VoxLab processing editor, you can dial in your perfect sound with the tap of button or twist of a knob. It's never been easier to create amazing content.

Specifications

Acoustic, video & electrical

Frequency Range
Mic Inputs: 20Hz - 20kHz

Monitor Outputs: 20Hz - 20kHz

Microphone Input Impedance: 4KO
Instrument Input Impedance: 1MO
Preamplifier Gain Range: 0 - 76dB
Equivalent Noise: -131.5dBV (A-weighted)
Line Output Maximum Level:4dBu
Headphone Output Power: 250mW
Power Requirements: USB-C PD (9V, 3A)
Analogue Audio Input Connectivity: 2 x combo jack (mic, instrument, line), 1 x 3.5 TRRS headset jack (I/O)

USB Interface 1: 1 x 2-in/14-out multichannel device, 1 x 2-in/2-out with mix-minus
USB Interface 2: 1 x 2-in/2-out with mix-minus
Bit Depth: 32 Bit (USB1), 24 Bit (USB2)

Sample Rate: 48kHz
Recording Storage: microSDHC, microSDXC, USB-C removable drive (exFAT - minimum 100MB/s)
Data Transfer: USB 3.0 SD card reader 130MB/s
Network Connectivity: WiFi 802.11g/n/ac 2.4GHz and 5GHz, Ethernet 100/100
Internal Storage (GB): 4GB (SMART pads)
OS Requirements: macOS 10.15 or later, Windows 10 Version 1803 or later, Windows 11

Mechanical

Weight (grams): 1131

Dimensions (millimetres)
Length: 235
Width: 225
Height: 76

Notes: The VMIX-10 R2 is the successor of the popular VMIX-10; a mixer made especially with the Korg Volca series in mind; it offers the following features:

6 mono input channels with minijack sockets each
2 stereo input channels with stereo minijack sockets for each
click-free mute buttons per channels
per channel: level, pan and two FX-send knobs
2 FX send-return sections (send mono, return stereo)
master level control
stereo headphone output with separate level control
four DC isolated 9V power supply outputs, for Volca synths or other devices. The DC isolation suppresses noise especially when powering Volcas from the VMIX-10 (an annoying effect caused by a design detail of the Volcas when powered commonly with the VMIX-10).

The case size is identical with the Volca series, so the VMIX-10 should fit exactly in the Volca stands that are available from different suppliers.

It includes a power supply adapter with snap-on plugs for EU, UK and US (AU on request).

For powering your Volca synths from the VMIX-10, Tangible Waves offer this cable:

DC Cable for Volca

For connecting gear with 1/4" jack sockets, adapters are sold separately;

Adapter mono minijack plug to 1/4" socket

Adapter stereo minijack plug to 2x 1/4" socket

Notes: A multi-functional mixer in a compact format for live or studio applications. Powered from the rear USB Type-C connection, this port also acts as a USB audio interface for direct recording and playback from a laptop without an additional power supply. 2 mono channels can accept an XLR input for microphone or 6.3mm plug for line or instrument (selectable) with switchable 48V phantom power for condenser microphones. These can be routed to the internal delay effect section for echo effects if desired. An additional stereo line channel can accept 6.3mm plugs or a single plug for mono operation. Each channel has a Gain control with Bass and Treble EQ controls. A USB type-A connector is provided for playback of mp3 files from a pen drive and the media player even has a built-in Bluetooth receiver for wireless playback from a smart phone or tablet. Outputs include main outs, recording and headphone connections. Comprehensive features make this a useful tool for live performance, project studios, laptop DJs and podcasting.

USB Type-C power supply and integrated audio interface
USB mp3/wma digital audio player
Bluetooth receiver for wireless audio streaming
Individually switchable +48V phantom power

Power supply: 5Vdc 2A (USB type-C adaptor included)
USB computer interface: Type-C (with power connection)
Audio source: USB audio player, Bluetooth receiver
Inputs: 2 x mono XLR/jack, Stereo L+R jack
Outputs: Main out L+R jack, Phones out stereo jack, REC out L+R RCA
Effects: Adjustable delay effect
Phantom power: +48V (switchable)
Dimensions: 182 x 160 x 50mm
Weight: 453g

In the Box

Q-PAD Mini Mixer
USB-C power adapter

Notes: A serious mixer from a legendary name. Tascam's 2400 combines analogue mixing with a 24-track recorder, built-in USB interface and DAW integration. Exceptional versatility in a convenient package.

Supplier's Notes:
Streamline Your Mix Process with Advanced Onboard Processing

The Model 2400's versatility doesn't compromise its mixing capabilities one bit. With per-channel compression, multiple sub groups, and master stereo bus processing including compression and EQ, you'll have the pro-level mix control you need in any scenario. Taking your project from tracking to a final master on the Model 2400 couldn't be simpler.

22 Channels and 24 Tracks, One Solution

With comprehensive 22-channel mixing capabilities, the Model 2400 is an ideal studio and live mixer for everything from larger combos and jazz ensembles to orchestra and choir ensembles. And when it comes to recording, no additional interface or computer are required.

Insert Professional Processors and Effects

Insert points on channels 1-12 allow you to easily integrate a studio rack full of processors and effects units. And, in addition to the onboard Master Bus processing, a send/return loop on the Main output allows you to connect external mastering gear such as compressors, EQs, stereo imagers and sonic exciters.

Ample Aux and Sub Outputs

With 5 Aux sends and 4 stereo sub groups, Model 2400 handles advanced mixing duties with ease. Create more monitor mixes without sacrificing an aux for effects. Connect multiple pairs of studio monitors for checking your mixes. In your studio or on stage, Model 2400 delivers the comprehensive connectivity and routing you need.

Professional Recording Capabilities

Model 2400 seamlessly integrates multitrack recording with studio and live mixing. With the ability to record 24 channels (22 inputs plus the stereo master) of high-quality audio direct to SD card media, Model 2400 is a powerful recording solution even if you're a DAW-less producer.

Sound with Excitement

TASCAM Ultra HDDA (High-Definition Discrete Architecture) mic preamps give Model 2400 the vibrant analogue sound that makes harmonics come alive.

With Ultra HDDA, any sound source will be represented with the utmost clarity and richness, and with an ultra-low noise floor.

Monitor Your Signal Virtually

With the Model Mixer Settings Panel app, users can take advantage of a digital meter bridge across by connecting the Model 2400 via USB to a PC or Mac. Set peak hold times, monitor the input, MTR or USB signal all while being able scale the GUI from a small window to full screen. Take it a step further by porting the app from your computer to a dedicated monitor of your choosing.

Ready to Be Your Studio Centrepiece

Model 2400 delivers the classic analogue console experience in the studio, with an onboard 24x22 audio interface that's ready to meld with modern production workflows. Insert points on channels 1-12 allow you to integrate studio processors and effects. And with the ability to return 22 DAW tracks through Model 2400's mix path and processing, it's also the most versatile analogue summing mixer you'll find.

MIDI Interface

Model 2400's comprehensive MIDI functionality allows full integration with MIDI-based production setups. From controlling drum machines and synthesizers from your DAW software, to synchronizing external effects processors to the tempo of your music and creating click tracks, Model 2400 offers the MIDI functionality you need to make it happen.

Specifications
Recorder
Recording media: SD (Class 10 or higher), SDHC (Class 10 or higher), SDXC (up to 512 GBytes, Class 10 or higher)
File system: SD: FAT16, SDHC: FAT32, SDXC: exFAT
Recording file formats: WAV (BWF), 44.1/48 kHz, 16/24 bit (maximum file size: 2 GBytes)
Playback file formats: WAV, BWF (44.1/48 kHz, 16/24 bit)
Recordable tracks: 24 (22 tracks + stereo mix)

Audio inputs and outputs

Microphone inputs (MIC, 1-12, 13,15,17,19): XLR-3-31 (combo jack), balanced (1: GND, 2: HOT, 3: COLD)
Maximum input level: +10 dBu
Nominal input level: -8 dBu
Minimum input level: -58 dBu
Gain adjustable range: 0-50 dB
Input impedance: 1.9 kO (1-12), 2.4 kO (13, 15, 17, 19)
Line/Instrument inputs (LINE/INST, 1-2): 6.3-mm TRS phone jack, balanced (Tip: HOT, Ring: COLD, Sleeve: GND)
Maximum input level: LINE: +22 dBu, INST: 19.8 dBV
Nominal input level: LINE: +4 dBu, INST: 1.8 dBV
Gain adjustment range: -10 dB to +40 dB
Input impedance: LINE: 22 kO, INST: 1 MO
Line inputs (LINE, 3-12): 6.3-mm TRS phone jack, balanced (Tip: HOT, Ring: COLD, Sleeve: GND)
Maximum input level: +22 dBu
Nominal input level: +4 dBu
Gain adjustable range: -10 dB to +40 dB
Input impedance: =22 kO
Stereo line inputs (LINE L/MONO, R, 13/14 to 21/22): 6.3-mm TRS phone jack, balanced (Tip: HOT, Ring: COLD, Sleeve: GND)
Maximum input level: +22 dBu
Nominal input level: +4 dBu
Gain adjustment range: -20 dB to +30 dB
Input impedance: =11 kO (mono), =22 kO (stereo)
Inserts (1-12): 6.3-mm TRS phone jack, (Tip: Send, Ring: Return, Sleeve: GND)
Maximum input level: +18 dBu
Nominal input level: 0 dBu
Input impedance: 15 kO
Maximum output level: +18 dBu
Nominal output level: 0 dBu
Output impedance: 100 O
Talkback input: XLR-3-31, balanced (1: GND, 2: HOT, 3: COLD)
Maximum input level: -22 dBu
Minimum input level: -65 dBu
Gain adjustable range: 52 dB
Input impedance= 2.6 kO
Main output (MAIN OUTPUT L/R): XLR-3-32, balanced (1: GND, 2: HOT, 3:COLD)
Maximum output level: +22 dBu
Nominal output level: +4 dBu
Output impedance: 200 O
Main inserts (MAIN SEND/RETURN L/R): 6.3-mm TRS phone jack (Tip: Send, Ring: Return, Sleeve: GND)
Maximum input level: +18 dBu
Nominal input level: 0 dBu
Input impedance= 9 kO
Maximum output level: +18 dBu
Nominal output level: 0 dBu
Output impedance: 100 O
Control Room outputs (CONTROL ROOM L/R): 6.3-mm TRS, balanced (Tip: HOT, Ring: COLD, Sleeve: GND)
Maximum output level: +16 dBu
Nominal output level: -2 dBu
Output impedance: 200 O
Aux outputs (AUX OUTPUT 1-5): 6.3-mm TRS, balanced (Tip: HOT, Ring: COLD, Sleeve: GND)
Maximum output level: +16 dBu
Nominal output level: -2 dBu
Output impedance: 200 O
Sub group outputs (SUB OUTPUT 1-2, 3-4, 5-6, 7-8): 6.3-mm TRS, balanced (Tip: HOT, Ring: COLD, Sleeve: GND)
Maximum output level: +16 dBu
Nominal output level: -2 dBu
Output impedance: 200 O
Phones output 1/2: 2 × 6.3-mm stereo phone jack
Maximum output power: 45 mW + 45 mW (at 32 O)

Control inputs/outputs

USB port: USB Type-B
Protocol: USB 2.0 High Speed (480 Mbit/s)
Click output
6.3-mm standard TS jack: (Tip: HOT, Sleeve: GND)
Footswitch connector: 6.3-mm TRS phone jack (Tip: FOOTSW1, Ring: FOOTSW2, Sleeve: GND, unlatching switches required)
MIDI input and output: 5-pin DIN connector
Format: Standard MIDI

USB audio

Sampling rate: 44.1 kHz, 48 kHz
Bit depth: 16 bit, 24 bit
Maximum number of audio channels: 24 inputs, 22 outputs

Bluetooth
Version: 5.1
Output class: 2 (approximate transmission distance: 10 m)
Supported profile: A2DP
Supported A2DP codecs: SBC, AAC
A2DP content protection: SCMS-T

Audio performance
S/N ratio: (22 kHz LPF, A-weighted), Main mix off: -100 dB, Main mix 0 dB: -80 dB
Equivalent input noise (EIN): -128 dBu (Rs=15 O, MIC IN to INSERT SEND, GAIN knobs at max., A-weighted)
Total harmonic distortion (THD+N): (GAIN knobs at min., 1 kHz), 0,01 % (mic input to main output), 0.004 % (mic input to main output, +2 dBu, BYPASS switches on)
Frequency response: (all gain knobs at min., 1 kHz) 20 Hz to 30 kHz, +0.5/-1 dB (analogue), 20 Hz to 20 kHz, +0.5/-1 dB (digital)
Crosstalk: (PAN knobs fully left or right, 1 kHz), Between channels: -80 dB, Between input and output: -80 dB
Maximum gain: (all GAIN knobs at max., PAN knobs fully left or right, BYPASS on, MASTER BUS IN off), 74 dB (MIC to MAIN OUT), 54 dB (MIC to INSERT OUT), 74 dB (MIC to SUB OUT), 75 dB (MIC to AUX OUT), 24 dB (USB/SD to MAIN OUT)

Computer system requirements

Windows: Windows 11, Windows 10 (64-bit)
Compatible computers: Windows-compatible computer with a USB 2.0 (or higher) port, using Tascam driver, operation not guaranteed with ARM64 CPUs
Display requirements (settings panel software): 1280 × 720 or higher, True colour recommended
Mac: macOS Sonoma (14), macOS Ventura (13)
Compatible computers: Apple Mac computer with a USB 2.0 (or higher) port
Display requirements (settings panel software): 1280 × 720 or higher, True colour recommended
iOS/iPadOS devices: iOS 17/iPadOS 17, iOS 16/iPadOS 16

Power supply and other specifications

Power: AC 100-240 V, 50/60 Hz
Power consumption: 65 W
Dimensions (W × D × H): 681 mm × 568 mm × 133 mm (overall), 639 mm × 568 mm × 133 mm (without side panels)
Weight: 14 kg
Guaranteed operating temperature range: 0-40 -C
Guaranteed operating humidity range: 5-85 % (without condensation)
Included items: AC power cord, Startup Guide, Registration Guide

Notes: ***B-STOCK: Paint chip on some parts***


A digital mixer at heart but so much more. 1010's unique take on mixing and recording includes built-in effects and EQ, compression, headphone/monitor mixes and output routing. Clever stuff.

Supplier's Notes:
Bluebox is the portable digital audio mixer that lets you get the most out of your electronic music gear. Connect your eurorack, sampler, drum machine and synthesizer outputs to 6 stereo, 3.5 mm TRS inputs and map them to 12 mono tracks or 6 stereo tracks, all with independent control for recording and playback. It's that keyboard mixer with live performance features that you always hoped someone would make.

Connect the output of your electronic music gear to Bluebox, and then route each track independently to the three outputs and effects sends. Each track offers control of volume, gain, 4 band parametric EQ, pan, mute and solo functions. Apply high-quality global reverb and delay effects along with 4 band EQ per track to add new depth to your sound with total control to quickly tweak incoming audio or track playback as needed.

With Bluebox you can record independent tracks or the Main mix using a standard microSD card. Capture your jam session for later review, or record the ultimate mix of the tracks for your song.

Bluebox's compact 5.5h x 5h x 2h case lets you tuck it into a crowded tabletop studio or throw it in your pack for the next gig.

Interact with the dynamic visual interface on the 3.5h touchscreen along with physical knobs, navigation buttons and transport buttons to quickly access the most important functions. MIDI input and output allow you to sync the clock with external gear for synchronized effects and metronome.

Add Some Colour to Your Mix:
Mix 12 mono/6 stereo tracks of live or prerecorded sound.
Independently route each track to any combination of three stereo TRS outputs:

Stereo Output 1 - Main mix
Stereo Output 2 - Assignable, with dedicated sub-mixer (pre or post fader)
Stereo Output 3 - Headphone output, with dedicated sub-mixer (pre or post fader)
Control one parameter for multiple tracks at once in Mixer mode.
Focus on one track at a time in Track mode.
Adjust the level or mute state of each output independently.
Use touch gestures or knobs to tweak your sound with four band EQ per track with support for Low Cut/Low Shelf, Parametric, and High Shelf/High Cut settings for each band.
Apply high-quality Reverb and Delay effects with independent effects sends for each track.
Override the headphone output with the Main mix on demand.
Maximize the loudness and unify your mix with the built-in global compressor
Sync to external clocks through the MIDI Input and Output.
Record hours of music as 48k, 24 bit WAVs directly to the microSD card as multi-track or as the main stereo mix.
Playback a previously recorded track while recording new ones.
Load firmware updates through the microSD card.
Mix electronic music gear such as the 1010music blackbox, eurorack modules, drum machines, samplers and synthesizers.
Save and recall Project settings including all parameters for tracks, outputs, EQ and effects.
Copyright 1010music LLC 2020 --- CONFIDENTIAL ---
Copyright 1010music LLC 2020 --- CONFIDENTIAL UNTIL 10/10/2020 ---
Fit it into a small spot on your desk and then tuck it in your pack for the next gig.

What is Included:
Bluebox digital recording mixer
A microSD card with bluebox firmware and pre-loaded project files
A USB power cable and AC adapter with 3 international adapters
2 MIDI Adapters . Male 3.5 mm TRS to Female 5 pin DIN, MIDI Class B standard
A Quick Start guide to show you the basics (full user manual available online)

Specs:
6 stereo 3.5 mm TRS inputs
12 mono tracks, 6 stereo tracks or something in between
3 independently controlled stereo 3.5 mm TRS outputs
3.5h touch screen, 4 knobs, 8 navigation buttons and 3 transport buttons
3 effects: reverb, delay and compressor
Records and plays back 48k, 24-bit audio WAV files
4 band EQ per track
MIDI In and Out for beat syncing effects
Dimensions: 5.5 x 5 x 2 (14 cm x 13 cm x 5 cm), 1 lb (450 grams)
Durable aluminum case

Notes: Fully featured audio mixer with 4 mono input channels, a stereo line input, stereo Aux input and a further minijack stereo input. Each mono mic/line channel has a combo XLR/jack input with +48V phantom power switchable in pairs for the XLR inputs. Each mic/line channel has a Gain control for matching the input source and a low-cut switch to filter out rumble or handling noise from microphones. Each mono channel also has High/Mid/Low EQ controls, Aux out level, FX level and Pan control. The onboard foot-switchable DSP effects engine has 99 presets for delay, reverb and modulation effects, each of which can be adjusted using two parameter controls. An onboard Bluetooth receiver has an illuminated pairing button and independent volume control. The USB type-A port on the top panel is for playback of audio files or can be used to record the main outputs to a USB storage device or as an external audio device when connected to a laptop. Main output is served by left & right XLR, in addition to 6.3mm monitor and headphone outputs and the Aux send & stereo return loop. The CMB-series offers large console features in a more manageable format for live performers and project studio recordists.

DSP effect section with 99 adjustable presets
USB mp3 audio player/recorder
Bluetooth receiver with independent volume control
PC/Mac audio device and aux power via USB A connection
3-band EQ per channel
Independent Aux send + stereo return
Switchable +48V phantom power
Balanced XLR/Jack mono inputs
USB type-C power supply

Power supply: 5Vdc 2A min. (USB-C adaptor included)
Power consumption: max.10W
Effects: 99 program DSP (2 parameter controls)
Inputs: 4 x combo XLR/jack, stereo L+R 6.3mm, stereo RCA + stereo 3.5mm
Audio source: Bluetooth receiver, USB mp3 player/recorder
Bluetooth version: 5.1 (+BR+EDR+BLE)
EQ: low+/-15dB @ 80Hz
EQ: mid+/-15dB @ 2.5kHz
EQ: high+/-15dB @ 12kHz
Phantom power: +48V switchable in pairs (XLR inputs only)
Frequency response: 20Hz - 22kHz (i1dB)
Input level: Mic +10dBu max. / Line +22dBu max.
Input impedance: Balanced XLR 2k Ohm, Balanced TRS jack 10k Ohm (unbal 20k Ohm)
THD +N: <0.05% @ 1kHz
Noise: EIN -122dBu (22Hz - 22kHz)
CMRR: >75dB (Mic 1kHz)
Sensitivity: XLR -60 to +10dBu, TRS jack -20 to +20dBu, Stereo -20 to +14dBu
Crosstalk>80dB (1kHz fader shutoff)
Outputs: Main L+R XLR, L+R Monitor 6.3mm, Headphones 6.3mm
Max. output level: XLR +22dBu, TRS +20dBu
Sends : returns1 Aux send, L+R return
Dimensions: 270 x 260 x 74mm
Weight: 1.495kg

In the Box

CMB-series mixing console
In-line USB-C power supply

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Analogue mixer with digital flexibility. 16 channels with Mackie's Onyx preamps, vintage-style EQ and full multi-track output over USB.

Supplier's Notes:
Flawless sound and maximum control

Record, produce and perform with a 16-channel mixer that offers remarkable performance, exceptional versatility and a wide host of features that will ignite your creativity. Every detail of the Mackie Onyx16 is geared towards recording at a professional level, from the award-winning Onyx preamps to the Perkins "British Style" EQs inspired by classic desks from the '60s and '70s.

Onyx Mic preamps

Record ultra-clean, transparent sound with incredible accuracy. The award-winning Onyx Mic Preamps are designed for maximum studio-quality performance. Create podcasts, live stream gameplay, or produce the next hit.

Perkins EQ

Onyx mixers feature an enhanced 3-Band "British Style" EQ based on the same circuit used on classic mixing consoles from the '60s and '70s. This version designed by Mackie has greater filter control, minimum phase shift and allows you to pinpoint specific frequency ranges.

To create the Perkins EQ, Cal Perkins started with the Wien Bridge circuit topology inspired by the hallowed "British" desks of the '60s and '70s. This design essentially trades boost/cut capability for a wider, highly musical Q filter. After a mind-numbing amount of math, Cal was able to specify capacitor and resistor values that would give the EQ an extra 6dB of control (i15 dB) without excessively narrowing the "Q" or bandwidth of the filters.

Built-in FX

We don't want to have to imagine a world without effects, which is why they were built into the Mackie Onyx16. Dive through a deep collection of reverb, chorus, delay and more. Access a digital library of customizable digital effects that you can quickly save and recall during studio sessions or band rehearsal. Spend less time menu-diving and more time making music.

Studio command

There's nothing like feeling in control of your workstation. Mackie Onyx16 mixers feature powerful full-colour LCDs with dedicated physical transport controls. Apply FX and recall up to six customizable presets using an intuitive single-knob interface. Record a stereo mix, browse files and play music direct to/from an SD card, all via Studio Command.

Bluetooth streaming

Bluetooth is a gamechanger on an analogue mixer. Pair a compatible device via Bluetooth to stream audio through aux sends or the main mix. Bluetooth compatibility allows you to compare mix reference tracks or play background music when you need it.

A light in the dark

Nobody likes squinting at a mixing board when the lighting is dim. Mackie Onyx16 mixers are equipped with vibrant buttons and full colour display for improved visibility, even in the darkest venues. On top of that, the backlit Mute and Solo buttons provide clear visibility so you'll always know what's going on in the mix.

Waveform OEM DAW

Waveform OEM is a multi award-winning workstation, featuring powerful and creative tools to inspire the modern musician. Unlike typical 'Lite' versions, it does not impose any restrictions - you get unlimited track count, powerful features, compatibility with all popular plug-ins and efficient performance on MacOS r, Windowsr, and Linux r operating systems.

DAW Essentials Collection

Introducing a collection of 16 contemporary FX plug-ins for use with any DAW. These plug-ins utilize the very latest algorithms and coding techniques to deliver extraordinary sound quality in an extremely efficient package, allowing the plug-ins to be used liberally across a wide range of native computer systems.

The DAW Essentials Collection includes:

Equaliser, Compressor, Reverber8, Delay Studio, Stereo Delay, Tape Delay, Crossover, Limiter, Gate / Expander, Ducker, Flanger, Crusher, Chorus, Bus Compressor, Phaser, and Auto Filter

Notes: White version of Rode's industry-standard RodeCaster II, the updated version of the best all-in-one production solution around. Stream, podcast and create content with ease.

*** Software update October 2024 ***

Introducing a massive update for the RODECaster Pro II and RODECaster Duo - virtual devices have landed!

This new feature allows users to treat their software as if it were a microphone connected to their RODECaster. This means they can assign each app to a fader and individually apply effects and processing, create custom routing and record them individually.

This update is currently available in beta, with a full public release coming soon. To access virtual devices whilst in beta, users will need to join the RODECaster Beta Program.


Supplier's Notes:
The RODECaster Pro II is the ultimate audio production solution for content creators, including streamers, podcasters and musicians. Combining revolutionary features with superior sound quality, endless customisability and unmatched ease of use, the RODECaster Pro II is all you will ever need to record incredible audio for your content.

A Completely New Beast

The RODECaster Pro II is the world's most powerful all-in-one audio production solution. Loaded with cutting-edge next-gen features and supercharged by a high-performance quad-core audio engine, it delivers next-level audio for any content creation application, including podcasting, streaming and gaming, and music production.

Revolutionary Sound

Featuring four balanced analogue inputs with high-quality Neutrik combo jacks for connecting microphones, instruments and line-level devices, the RODECaster Pro II is ideal for everything from recording a single microphone for a livestream or podcast to capturing complete multitracked music recordings.

World-class Revolution Preamps deliver pristine audio quality with any microphone or instrument. Designed from the ground up specifically for the RODECaster Pro II, these ultra-low-noise, high-gain preamps will give you plenty of output while remaining incredibly quiet, eliminating the need for microphone boosters, lifters or external processing. Sonic purity has never been more accessible.

Powered by APHEX

Craft your sound with studio-quality audio processing powered by one of the most revered names in pro audio: APHEX. On-board is a suite of authentic emulations of legendary hardware audio processors, including the Aural Exciter, Big Bottom and Compellor master compressor/leveller. There is also a studio-quality compressor, noise gate, high-pass filter, de-esser and three-band equaliser for each channel, all powered by APHEX. Sound exceptional every time you hit record.

Incredible Audio, Incredibly Easy

The RODECaster Pro II is incredibly simple to navigate using the large high-definition touchscreen and tactile rotary encoder, giving you hands-on control over every aspect of your sound. Getting set up takes seconds, and with professionally tailored presets and the intuitive VoxLab processing editor allowing you to dial your perfect sound with the tap of button or twist of a knob, taking your audio to new heights has never been easier.

Not Just Sound Pads. SMART Pads

Other consoles have sound pads. The RODECaster Pro II has SMART pads. Trigger on-the-fly voice effects like reverb, echo, pitch and robot FX, send MIDI commands to external software, activate automated mixer actions like fade ins and fade outs. And yes, fire off sound effects, music beds, samples or jingles. Unlimited creativity and control at your fingertips.

Endless Customisation. Endless Creative Freedom.

No matter what kind of content you're creating, the RODECaster Pro II can be customised to suit your recording setup, your ideal workflow, and your unique sound. The nine channels are individually assignable, allowing you to create personalised mixer configurations. Every processor and effect can be tweaked to taste on-board using the advanced editor, each SMART pad is fully programmable (with eight banks of eight pads for a total of 64 unique actions available), and the bright RGB LEDs can be customised to suit your setup and aesthetic. The possibilities are endless.

What's in the Box

1 x RODECaster Pro II - White
1 x Power Adapter
1 x USB-C to USB-C Cable

Acoustic & electrical specifications

Frequency Range: Mic Inputs: 20Hz - 20kHz
Monitor Outputs: 20Hz - 20kHz
Microphone Input Impedance: 4KO
Instrument Input Impedance: 1MO
Input Dynamic Range: 113dB
Preamplifier Gain Range: 0 - 76dB
Equivalent Noise: -131.5dBV (A-weighted)
Line Output Maximum Level: 4dBu
Headphone Output Power: 250mW
Power Requirements: 30W USB-C PD (15V, 2A)

Analogue Audio Input
Connectivity: 4 x combo jack inputs
(microphone, line, instrument)

Analogue Audio Output
Connectivity: 2 x balanced line output, 4 x headphone output
Bluetooth Connectivity: Bluetooth audio with Music and
Headset profile (wide band speech)
USB Interface 1: 1 x 2-in/16-out multichannel device,
1 x 2-in/2-out with mix-minus
USB Interface 2: Via USB: 5V

Acoustic & electrical specifications

Bit Depth: USB-C
Sample Rate: 24-bit / 32-bit floating point
Recording Storage: 48 / 96 / 192
Data transfer: APHEXr digital signal processing (only available at 48kHz sample rate)
Network connectivity: Windows 10
Mac OS 10.15
OS Requirements: Mac OS 10.15 or later, Windows 10 Version
1803 or later, Windows 11
Internal Storage: 4GB (SMART Pads)

Mechanical specifications

Weight (grams): 1960g

Dimensions (millimetres):
Length: 305mm
Width: 270mm
Height: 60mm

Notes: Mid-sized recording option with a bit of everything: analogue mixer, audio interface, built-in stereo recorder plus versatile digital effects. All you need in a single box.

Supplier's notes:
Don't let the classic analogue mixer design fool you - the StudioLive ARc-series mixers were built to record. With a pristine analogue front-end, high-gain XMAX-L mic preamps, and a 24-bit, 96 kHz, USB-C compatible USB 2.0 audio interface, its hybrid design makes it simple to record studio productions and mix live shows from a single intuitive console. Add in a musical 3-band analogue EQ, mic/line boost for low-level vintage synths and broadcast microphones, all-new digital effects with rich reverbs and lush delays, Bluetooth connectivity, and a stereo SD recorder... and you have a mixing and recording powerhouse that fulfils the needs of both modern musicians and content creators.

A full-featured audio interface:

The StudioLive AR12c audio interface operates at up to 96 kHz for high-definition mixing and recording. Record each of the 12 inputs, plus the main mix for even more flexible recording options. Play back up to four streams for monitoring previously recorded tracks - plus a click. Eight lauded XMAX mic preamps provide all the gain you need to capture even the most subtle details without adding any extra noise. The analogue mixer front-end makes connecting your gear to your computer intuitive, and creating monitor mixes is quick and easy. With a USB-C compatible connection, your StudioLive AR12c is ready to use as an audio interface for nearly any computer.

The channel that does it all - even Bluetooth connectivity:

The unique Super Channel can handle four stereo sources at once, making it easy to integrate consumer devices into your studio workflow. Connect a turntable to the RCA inputs, use the 1/8-inch stereo input to plug-in your smartphone, or forget the cable and connect it via Bluetooth wireless technology. You can also toggle between a stereo playback stream from your computer and playback from the onboard SD recorder, making rehearsal a snap.

A complete recording solution for studio and stage:

The StudioLive AR12c audio interface and analogue mixer is tightly integrated with state-of-the-art recording software to help you realize your creative vision. Record multitrack live performances with one click thanks to PreSonus' Capture live-recording software. Create complete studio productions with our award-winning Studio One Artist DAW. With two professional recording applications included with your StudioLive AR12c, you're ready to record right out of the box.

Stereo recording without a computer:

Imagine you're rehearsing with your band and want to record your session to analyse later. Or perhaps you're in the middle of a songwriting session and want to capture your ideas as quickly as they come to you. Either way, the StudioLive AR12c's stereo SD recorder has you covered. Insert any SD/SDHC card and you're ready to record your main mix to listen to later, so you'll never forget a great song idea or an amazing guitar solo. Doing mobile interviews for your podcast? Leave the computer at home and record straight to SD.

Effects without latency:

Monitoring with reverb and delay helps to create better recordings. Any vocalist or guitarist will tell you that a little reverb makes them feel more comfortable while performing. The StudioLive AR12c mixer's onboard effects processor lets you add high-quality reverb, delay, or chorus to any channel for a professional monitor mix. Like what you hear in your headphones? Record the Main Mix and capture the effects mix, too - with or without the dry channels - to blend with your multitrack recording. Experiment in post-production to your heart's content.

All the connections you need with a familiar look:

Packed with all the connections and controls needed to mix and record in the studio and on the stage, the StudioLive AR12c is the ultimate recording solution. The four mono channels and four stereo channels include a musical three-band EQ, plus one of PreSonus' famed XMAX mic preamps. Two dedicated monitor mixes with balanced outputs provide your musicians the custom mix they need. The USB-C compatible connector ensures your StudioLive AR12c audio interface will be the centre of your studio for years to come. And with high-resolution 96 kHz recording, a full complement of connections, and an instantly familiar workflow, the StudioLive AR12c is the perfect recording and mixing solution for the modern musician and content creator.