New releases last eight weeks: DJ Equipment

Notes: The Chroma USB Drive is a 128GB dual USB-A and USB-C drive designed specifically for DJs.

This drive has especially-chosen USB 3.2 memory, enabling fast library syncing on Rekordbox and Engine (sync in seconds, not painful hours).

Optimized for pro use, the Chroma Drive went through rigorous testing across Pioneer DJ and Denon DJ gear.

It's incredibly reliable for long gigs and harsh conditions. Sync faster, perform smoother, and never worry about adapters again!

Sync in seconds, not hours

Have you ever waited an hour for just 100 songs to upload to your USB from Rekordbox? It's not optimized for DJing. Rarely advertised on USB drives are the actual read and write speeds for DJ-style transfers. Most USB drives have memory not designed to update lots of little files quickly (metadata, cues, songs, analysis data, etc), but better at single/big files (i.e: a large single video file). DJs libraries aren't single files - they're lots of different files that have to be checked, updated, and then added to - all done concurrently.

Tested by DJs for thousands of hours

We've tested these with 350+ hour (two week) marathon DJ sets, using drives on all Pioneer DJ and Denon DJ all-in-ones and media players (CDJs), heavy media recording (DJ sets, 4k ProRes video), Stressdisk testing to ensure the memory has a long use life, high dust / high heat environments in the middle of the Black Rock Desert, heavy repeated plugging/unplugging (500+ times) to simulate long-term wear on the connectors.

Maximum DJ gear compatibility

The drive comes pre-formatted as FAT32. Yes, some newer DJ gear can work with ExFAT and HFS drive formats, but for maximum compatibility with all DJ gear, even just 3-4 year old units, FAT32 makes the most sense. For best results, this means you should leave 10-15% of the drive free to avoid library corruption.

Works with as many pieces of DJ gear as possible out of the box:

The drive comes pre-formatted as FAT32. Yes, some newer DJ gear can work with ExFAT and HFS drive formats, but for maximum compatibility with all DJ gear, even just 3-4 year old units, FAT32 makes the most sense. The only major limitation is that you cannot copy over files larger than 4 GB onto these drives. So if you want to have a very long lossless set stored on your drive, or use it to copy other types of media, you can reformat it easily. We recommend keeping all of your DJ drives FAT32 to make sure that older firmwares and gear all work seamlessly for your future.

Works with:

XDJ-AZ
XDJ-XZ
XDJ-RX, RX2, RX3, RR
Opus QUAD, OMNIS Duo
CDJ-3000, CDJ-2000/NXS/NXS2
XDJ-1000/MK2
Prime GO, Prime 2, Prime 4, plus the plus models
SC5000, SC6000, plus the M models
Honestly, pretty much any DJ device made in the last two decades that uses a USB port on it and can accept FAT32 formatted drives

Tech Specs
High speed USB flash memory designed for rapid-transfer of many smaller files
USB 3.2 Gen 1 (with memory that performs well at lots of rapid small file updates and read/writes like in Rekordbox syncing)
Quality metal alloy build
Engraved with DJ TechTools logo on one side. The other side is blank, but can be customized
Dual USB connectors in USB-A and USB-C
Rotatable cover (with satisfying mechanical action) to protect connector not being used
1 year limited warranty for mechanical issues (water, accidental, or intentional damage not covered, please buy an Extend warranty if you want all issues covered).
Support from DJ Techtools staff for all drive issues

Drive Specs:

Size: 128gb
Connector Type: USB-A + USB-C
Read Speed: 160-180MB/s
Write Speed: 240-260MB/s
Material: Zinc Alloy

Notes: The Chroma USB Drive is a 128GB dual USB-A and USB-C drive designed specifically for DJs.

This drive has especially-chosen USB 3.2 memory, enabling fast library syncing on Rekordbox and Engine (sync in seconds, not painful hours).

Optimized for pro use, the Chroma Drive went through rigorous testing across Pioneer DJ and Denon DJ gear.

It's incredibly reliable for long gigs and harsh conditions. Sync faster, perform smoother, and never worry about adapters again!

Sync in seconds, not hours

Have you ever waited an hour for just 100 songs to upload to your USB from Rekordbox? It's not optimized for DJing. Rarely advertised on USB drives are the actual read and write speeds for DJ-style transfers. Most USB drives have memory not designed to update lots of little files quickly (metadata, cues, songs, analysis data, etc), but better at single/big files (i.e: a large single video file). DJs libraries aren't single files - they're lots of different files that have to be checked, updated, and then added to - all done concurrently.

Tested by DJs for thousands of hours

We've tested these with 350+ hour (two week) marathon DJ sets, using drives on all Pioneer DJ and Denon DJ all-in-ones and media players (CDJs), heavy media recording (DJ sets, 4k ProRes video), Stressdisk testing to ensure the memory has a long use life, high dust / high heat environments in the middle of the Black Rock Desert, heavy repeated plugging/unplugging (500+ times) to simulate long-term wear on the connectors.

Maximum DJ gear compatibility

The drive comes pre-formatted as FAT32. Yes, some newer DJ gear can work with ExFAT and HFS drive formats, but for maximum compatibility with all DJ gear, even just 3-4 year old units, FAT32 makes the most sense. For best results, this means you should leave 10-15% of the drive free to avoid library corruption.

Works with as many pieces of DJ gear as possible out of the box:

The drive comes pre-formatted as FAT32. Yes, some newer DJ gear can work with ExFAT and HFS drive formats, but for maximum compatibility with all DJ gear, even just 3-4 year old units, FAT32 makes the most sense. The only major limitation is that you cannot copy over files larger than 4 GB onto these drives. So if you want to have a very long lossless set stored on your drive, or use it to copy other types of media, you can reformat it easily. We recommend keeping all of your DJ drives FAT32 to make sure that older firmwares and gear all work seamlessly for your future.

Works with:

XDJ-AZ
XDJ-XZ
XDJ-RX, RX2, RX3, RR
Opus QUAD, OMNIS Duo
CDJ-3000, CDJ-2000/NXS/NXS2
XDJ-1000/MK2
Prime GO, Prime 2, Prime 4, plus the plus models
SC5000, SC6000, plus the M models
Honestly, pretty much any DJ device made in the last two decades that uses a USB port on it and can accept FAT32 formatted drives

Tech Specs
High speed USB flash memory designed for rapid-transfer of many smaller files
USB 3.2 Gen 1 (with memory that performs well at lots of rapid small file updates and read/writes like in Rekordbox syncing)
Quality metal alloy build
Engraved with DJ TechTools logo on one side. The other side is blank, but can be customized
Dual USB connectors in USB-A and USB-C
Rotatable cover (with satisfying mechanical action) to protect connector not being used
1 year limited warranty for mechanical issues (water, accidental, or intentional damage not covered, please buy an Extend warranty if you want all issues covered).
Support from DJ Techtools staff for all drive issues

Drive Specs:

Size: 128gb
Connector Type: USB-A + USB-C
Read Speed: 160-180MB/s
Write Speed: 240-260MB/s
Material: Zinc Alloy

Notes: The Chroma USB Drive is a 128GB dual USB-A and USB-C drive designed specifically for DJs.

This drive has especially-chosen USB 3.2 memory, enabling fast library syncing on Rekordbox and Engine (sync in seconds, not painful hours).

Optimized for pro use, the Chroma Drive went through rigorous testing across Pioneer DJ and Denon DJ gear.

It's incredibly reliable for long gigs and harsh conditions. Sync faster, perform smoother, and never worry about adapters again!

Sync in seconds, not hours

Have you ever waited an hour for just 100 songs to upload to your USB from Rekordbox? It's not optimized for DJing. Rarely advertised on USB drives are the actual read and write speeds for DJ-style transfers. Most USB drives have memory not designed to update lots of little files quickly (metadata, cues, songs, analysis data, etc), but better at single/big files (i.e: a large single video file). DJs libraries aren't single files - they're lots of different files that have to be checked, updated, and then added to - all done concurrently.

Tested by DJs for thousands of hours

We've tested these with 350+ hour (two week) marathon DJ sets, using drives on all Pioneer DJ and Denon DJ all-in-ones and media players (CDJs), heavy media recording (DJ sets, 4k ProRes video), Stressdisk testing to ensure the memory has a long use life, high dust / high heat environments in the middle of the Black Rock Desert, heavy repeated plugging/unplugging (500+ times) to simulate long-term wear on the connectors.

Maximum DJ gear compatibility

The drive comes pre-formatted as FAT32. Yes, some newer DJ gear can work with ExFAT and HFS drive formats, but for maximum compatibility with all DJ gear, even just 3-4 year old units, FAT32 makes the most sense. For best results, this means you should leave 10-15% of the drive free to avoid library corruption.

Works with as many pieces of DJ gear as possible out of the box:

The drive comes pre-formatted as FAT32. Yes, some newer DJ gear can work with ExFAT and HFS drive formats, but for maximum compatibility with all DJ gear, even just 3-4 year old units, FAT32 makes the most sense. The only major limitation is that you cannot copy over files larger than 4 GB onto these drives. So if you want to have a very long lossless set stored on your drive, or use it to copy other types of media, you can reformat it easily. We recommend keeping all of your DJ drives FAT32 to make sure that older firmwares and gear all work seamlessly for your future.

Works with:

XDJ-AZ
XDJ-XZ
XDJ-RX, RX2, RX3, RR
Opus QUAD, OMNIS Duo
CDJ-3000, CDJ-2000/NXS/NXS2
XDJ-1000/MK2
Prime GO, Prime 2, Prime 4, plus the plus models
SC5000, SC6000, plus the M models
Honestly, pretty much any DJ device made in the last two decades that uses a USB port on it and can accept FAT32 formatted drives

Tech Specs
High speed USB flash memory designed for rapid-transfer of many smaller files
USB 3.2 Gen 1 (with memory that performs well at lots of rapid small file updates and read/writes like in Rekordbox syncing)
Quality metal alloy build
Engraved with DJ TechTools logo on one side. The other side is blank, but can be customized
Dual USB connectors in USB-A and USB-C
Rotatable cover (with satisfying mechanical action) to protect connector not being used
1 year limited warranty for mechanical issues (water, accidental, or intentional damage not covered, please buy an Extend warranty if you want all issues covered).
Support from DJ Techtools staff for all drive issues

Drive Specs:

Size: 128gb
Connector Type: USB-A + USB-C
Read Speed: 160-180MB/s
Write Speed: 240-260MB/s
Material: Zinc Alloy

Notes: Space grey version of the specially designed Chroma USB drive from DJ Tech Tools. Optimised for DJ use, the Chroma offers USB-C and USB-A connections to ensure fast performance and compatibility with both Denon and Pioneer players.

Supplier's Notes:
The Chroma USB Drive is a 128GB dual USB-A and USB-C drive designed specifically for DJs.

This drive has especially-chosen USB 3.2 memory, enabling fast library syncing on Rekordbox and Engine (sync in seconds, not painful hours).

Optimized for pro use, the Chroma Drive went through rigorous testing across Pioneer DJ and Denon DJ gear.

It's incredibly reliable for long gigs and harsh conditions. Sync faster, perform smoother, and never worry about adapters again!

Sync in seconds, not hours

Have you ever waited an hour for just 100 songs to upload to your USB from Rekordbox? It's not optimized for DJing. Rarely advertised on USB drives are the actual read and write speeds for DJ-style transfers. Most USB drives have memory not designed to update lots of little files quickly (metadata, cues, songs, analysis data, etc), but better at single/big files (i.e: a large single video file). DJs libraries aren't single files - they're lots of different files that have to be checked, updated, and then added to - all done concurrently.

Tested by DJs for thousands of hours

We've tested these with 350+ hour (two week) marathon DJ sets, using drives on all Pioneer DJ and Denon DJ all-in-ones and media players (CDJs), heavy media recording (DJ sets, 4k ProRes video), Stressdisk testing to ensure the memory has a long use life, high dust / high heat environments in the middle of the Black Rock Desert, heavy repeated plugging/unplugging (500+ times) to simulate long-term wear on the connectors.

Maximum DJ gear compatibility

The drive comes pre-formatted as FAT32. Yes, some newer DJ gear can work with ExFAT and HFS drive formats, but for maximum compatibility with all DJ gear, even just 3-4 year old units, FAT32 makes the most sense. For best results, this means you should leave 10-15% of the drive free to avoid library corruption.

Works with as many pieces of DJ gear as possible out of the box:

The drive comes pre-formatted as FAT32. Yes, some newer DJ gear can work with ExFAT and HFS drive formats, but for maximum compatibility with all DJ gear, even just 3-4 year old units, FAT32 makes the most sense. The only major limitation is that you cannot copy over files larger than 4 GB onto these drives. So if you want to have a very long lossless set stored on your drive, or use it to copy other types of media, you can reformat it easily. We recommend keeping all of your DJ drives FAT32 to make sure that older firmwares and gear all work seamlessly for your future.

Works with:

XDJ-AZ
XDJ-XZ
XDJ-RX, RX2, RX3, RR
Opus QUAD, OMNIS Duo
CDJ-3000, CDJ-2000/NXS/NXS2
XDJ-1000/MK2
Prime GO, Prime 2, Prime 4, plus the plus models
SC5000, SC6000, plus the M models
Honestly, pretty much any DJ device made in the last two decades that uses a USB port on it and can accept FAT32 formatted drives

Tech Specs
High speed USB flash memory designed for rapid-transfer of many smaller files
USB 3.2 Gen 1 (with memory that performs well at lots of rapid small file updates and read/writes like in Rekordbox syncing)
Quality metal alloy build
Engraved with DJ TechTools logo on one side. The other side is blank, but can be customized
Dual USB connectors in USB-A and USB-C
Rotatable cover (with satisfying mechanical action) to protect connector not being used
1 year limited warranty for mechanical issues (water, accidental, or intentional damage not covered, please buy an Extend warranty if you want all issues covered).
Support from DJ Techtools staff for all drive issues

Drive Specs:

Size: 128gb
Connector Type: USB-A + USB-C
Read Speed: 160-180MB/s
Write Speed: 240-260MB/s
Material: Zinc Alloy

Notes: The Chroma USB Drive is a 256GB dual USB-A and USB-C drive designed specifically for DJs. This drive is has specially-chosen USB 3.2 memory, enabling fast library syncing on Rekordbox and Engine (sync in seconds, not painful hours). Optimized for pro use, the Chroma Drive went through rigorous testing across Pioneer DJ and Denon DJ gear. It's incredibly reliable for long gigs and harsh conditions. Sync faster, perform smoother, and never worry about adapters again!

Notes: The Chroma USB Drive is a 256GB dual USB-A and USB-C drive designed specifically for DJs. This drive is has specially-chosen USB 3.2 memory, enabling fast library syncing on Rekordbox and Engine (sync in seconds, not painful hours). Optimized for pro use, the Chroma Drive went through rigorous testing across Pioneer DJ and Denon DJ gear. It's incredibly reliable for long gigs and harsh conditions. Sync faster, perform smoother, and never worry about adapters again!

Notes: The Chroma USB Drive is a 256GB dual USB-A and USB-C drive designed specifically for DJs. This drive is has specially-chosen USB 3.2 memory, enabling fast library syncing on Rekordbox and Engine (sync in seconds, not painful hours). Optimized for pro use, the Chroma Drive went through rigorous testing across Pioneer DJ and Denon DJ gear. It's incredibly reliable for long gigs and harsh conditions. Sync faster, perform smoother, and never worry about adapters again!

Notes: The Chroma USB Drive is a 256GB dual USB-A and USB-C drive designed specifically for DJs. This drive is has specially-chosen USB 3.2 memory, enabling fast library syncing on Rekordbox and Engine (sync in seconds, not painful hours). Optimized for pro use, the Chroma Drive went through rigorous testing across Pioneer DJ and Denon DJ gear. It's incredibly reliable for long gigs and harsh conditions. Sync faster, perform smoother, and never worry about adapters again!

Notes: Blue version of the DJ Control Inpulse 200 MK2, a superb option for beginners and anyone looking for an ultra-portable DJ controller. Great value.

Supplier's Notes:
Elevate your DJing journey with the Hercules DJControl Inpulse 200 MK2 Blue Edition. This sleekcontroller comes packed with powerful features, including Serato DJ Lite and DJUCED software,designed to inspire creativity and unlock your full potential. The groundbreaking Stems feature lets youeffortlessly blend instrumentals from one track with vocals from another, opening endless possibilities for unique mixes.

Master the art of beatmatching with the intuitive Beatmatch Guide, featuring built-in light indicators below each jog wheel and beside each tempo fader, making track syncing a breeze. With 4 performance pads and 4 versatile modes (Hot Cue, Stems, FX, Sampler), you'll have everything you need to craftseamless, professional-level transitions that will captivate any crowd.

Whether you're a beginner or looking to refine your skills, the DJ Academy video tutorials offer step-by-step guidance, expert tips, and tricks to help you perfect your mixing techniques and take your sets to the next level. Let your creativity shine with the DJControl Inpulse 200 MK2 Blue Edition

Notes: Silver version of Hercules's Inpulse 500. Designed for Serato and Djuced, this two-deck DJ controller offers excellent value for money and industry-standard features to help develop your mixing skills.

Supplier's Notes:
The DJ Control Inpulse 500 Silver Edition is more than just a DJ controller - it's a complete package designed to ignite your passion for DJing

This special edition boasts sleek silver-coloured finishes, combining aesthetics with cutting-edge technology to enhance your performance. Whether you are a beginner looking to master the basics or an experienced DJ seeking advanced features for a mobile setup, the Inpulse 500 Silver Edition delivers everything you need to make your mark.

It includes a transport bag, ensuring your gear stays protected anywhere effortlessly, Serato DJ Lite + compatibility with Serato DJ Pro (upgrade licence required), and and a license key to the all-new DJUCED Pro software with performance-ready features for any kind of DJ, such as VJing, Day mode, advanced FX and so much more.

A unique DJ controller for live performances

Stand out with the elegant silver finish that adds a touch of sophistication to your setup. The sleek and modern aesthetic not only looks great but also complements any professional or home studio environment.

DJUCED Pro

Gain access to DJUCED Pro software, providing you with powerful tools to mix and create your unique soundscapes. This comprehensive software offers an intuitive interface, advanced features, and seamless integration with your DJControl Inpulse 500 Silver Edition controller.

Advanced software features

With Unlock mode, you can get ready for your performance without having to connect your DJ controller. You can analyze, add hot cues, add saved loops and test your transitions with just your laptop. With Remapping, you can assign different functions or commands to the knobs, buttons, pads and faders on your DJ controller to tailor your gear to your specific preferences or workflow.

Interactive performances made easy

With the new VJing feature in DJUCED Pro, you can incorporate visual elements from a built-in library of video loops that sync to your music and enhance your performance.

Ready for wherever your DJ career takes you

Protect your gear on the go with the included high-quality transport bag, designed specifically for the DJControl Inpulse 500. This durable bag features padded compartments and reinforced stitching to ensure your equipment stays safe during travel.

Professional-grade audio connectivity

The controller features a range of inputs and outputs, including 2x RCA and 2xTS master outputs, a microphone input, an AUX input, and a headphone output for seamless integration with your setup. This ensures you can connect to any sound system or external equipment with ease.

Beatmatch Guide

Master the art of DJing with the helpful light guides that assist with beatmatching, syncing, and understanding the layout. These visual aids are perfect for beginners and provide an extra layer of support for experienced DJs looking to refine their skills.

Intelligent Music Assistant (IMA)

Get song recommendations based on your library to keep the energy up and the crowd dancing. The IMA helps you maintain a seamless flow of music, ensuring you always have the perfect track ready to go.

Specifcations

Audio
44.1 kHz / 24-bit AUX input 3.5 mm Headphone output 3.5 mm + 6.3mm Microphone input 6.3mm Master outputs: 2 x RCA + 2 x TRS

Mixer controls
1 Filter, 3 EQ, 1 Gain and 1 volume fader per deck Crossfader, volume master, headphone volume, master and deck VU meters Headphone cue to mix, microphone volume, microphone 2-band EQ AUX volume, AUX Filter Filter/FX rack with 4 FX select buttons and 2 rotary knobs

Deck controls
Touch-sensitive jog wheel Tempo fader 8 pads x 8 modes (Hot-Cue, Loop, Stems, Sampler) Vinyl/Slip/Quantize Loop In/Loop Out buttons Autoloop knobs

Minimum system requirements

Intel Core i7
Windows 10 & 11
AMD Ryzen 5 3000 series or higher (Serato)
Apple M1 or better
macOS 12 or later
8 GB RAM or more

What's in the box

DJControl Inpulse 500 Silver Edition controller
Controller unlocks DJUCED and Serato DJ Lite licenses
DJUCED Pro license card

Notes: White version of the premium Inpulse T7 from Hercules, a Serato-compatible controller with motorised platters for hands-on 7-inch vinyl feel. Two-channel design with Serato DJ Lite and Djuced software included.

Supplier's Notes:
Introducing the DJ Control Inpulse T7 White Edition, the latest release from Hercules DJ following the success of the Inpulse range and the DJ Control Inpulse T7.

Designed with precision and elegance, this model is perfect for both seasoned DJs and beginners. Experience unparalleled control and creativity with features that cater specifically to your artistic needs, like the FX section, the Stems functionalities and so much more.

Whether you are performing at a club, a party, or honing your skills at home, the DJControl Inpulse T7 White Edition transforms your music and elevates your performances. Discover the future of DJing with a controller that combines innovation with timeless style.

Product weight : 11 lb / 5 kg
Product dimensions (W x D x H) : 25.7 x 13.8 x 3.5" / 65.2 x 35 x 9 cm
Master outputs for speakers : 2 x XLR + 2 x RCA
Diameter of jog wheels : 7 inches / 17.8 cm
Headphones outputs : 1/8" / 3.5 mm stereo mini-jack + 1/4" / 6.35 mm stereo jack
Audio resolution : 44.1 kHz / 24-bit
Motorized platters : 33 1/3 RPM motorized metal platters for 7" discs (can switch to 45 RPM in Serato DJ Pro)
Computer interface : USB
Included software : Serato DJ Lite, DJUCED

Notes: Introducing Jazzman's own exclusive range of brand new 7" hard-wearing wooden record cases, in equal measure stylish and functional, solving the age-old problem of storing, transporting & displaying your precious 45s once and for all!

The PRO Large holds 150 x 7" records, and is available in your choice of 2 finishes: Dark Walnut or Graphite Grey.

This new updated design is again custom made to an exact specification in limited numbers. They don't just look the business, they've been built for professional use and will last for many years to come.

Ugly, bulky industrial cheap n' nasty mass-produced flight cases they are not! No flimsy plastic, chipboard, MDF or cheap cardboard either! These cases are hand-crafted from ethically-sourced & hard-wearing wood, the ultimate 7" record cases for all serious record collectors & professional DJs.

Each case has been hand-made in the EU from wood that has been sourced from managed and sustainable forests. They have been custom built to Jazzman's exact specifications before being stained and lacquered for a durable finish:

The lid is fully removable via detachable metal hinges so you have unfettered access to your records
Interior lined with soft & durable black felt to add both extra cushioning and a luxurious feel. Each interior is also embossed once with Jazzman's shiny 45CASE logo
All corners made with extra strong interlocking dovetail joints
Dual metal catches on the front are lockable with padlocks (not included) to keep your records secure from unwanted attention
Strong metal brackets feature on all corners to further protect against knocks & damage
Wood sourced from managed and sustainable forests
The base has 4 sturdy rubber feet to protect the bottom of the case when standing
Each cases has dual compartments, securely holding up to 150 of your prized 7" records. The interior dimensions will also accommodate double-bagged 45s.

Important note: due to the innate variability of wood grain, each box is unique and will differ slightly to the image shown. Records are for illustration purposes only and are not included!

Details:

Exterior size: 420 x 220 x 220mm
Weight when empty: 3.2kg (7lb)
Weight with 150 records: 11kg (24lb)

"I'm really impressed with this box, nobody's made them like this for years, a nice new home for my best stuff" - Mark 'Butch' Dobson (World #1 Northern Soul DJ)

"Jazzman are already known for making great records, well done to them for making the nicest record boxes I've seen in years" - Norman Jay MBE

"Sturdy and with a classic design, this is the best 7" box I have come across" - Eddie Pillar (Acid Jazz)

"Northern, Funk, Rockabilly, Garage - these are the boxes to keep 'em in, f*** marvellous!" - The Legendary Keb Darge

Notes: A premium take on the classic portable turntable concept, the Handytraxx solid playback and compact design, plus contemporary features including digital effects, looping and a built-in fader for scratching.

Supplier's Notes:
Handytraxx Play

Portable vinyl performance, perfected.

The Handytraxx Play reimagines the classic portable turntable with modern innovation. Designed for DJs, vinyl enthusiasts, and creative performers, it combines portability with cutting-edge features, including unique Korg digital effects, a built-in audio looper, and a high-quality fader optimised for scratching. Developed in collaboration with Toshihide Nakama, co-creator of the original Handy Trax, this redefined turntable blends tradition and technology, delivering a truly unparalleled experience for music lovers on the go. Whether you're spinning at home or showcasing your skills anywhere, the Handytraxx Play is your perfect companion.

Key features

A portable player that lets you enjoy playing records and performing as a DJ, wherever you go
Unique Korg digital effects.
Audio looper for a wide range of musical expression and creativity
High-quality fader optimized for scratching
Custom-designed tonearm and motor control circuit
Developed in collaboration with Toshihide Nakama, former President of Vestax Inc.

The Handy Trax, originally created by Vestax, redefined portable turntables by giving users the freedom to play and scratch records anywhere. Beloved by DJs and vinyl enthusiasts alike, it helped spark the rise of "portablism".

Now, Korg proudly reinvents this iconic turntable with the Handytraxx Play. Developed in collaboration with Toshihide Nakama, former President of Vestax and co-creator of the Handy Trax, the Handytraxx Play retains the essence of the original while introducing exciting new features. These include cutting-edge digital effects, a built-in looper, and high-quality controls that make it possible to physically "play" with records on the go. Combined with unique customisation options, the Handytraxx Play delivers an unparalleled portable turntable experience. Perfect for casual vinyl lovers and hardcore portablists alike.

Honouring Toshihide Nakama

The Handytraxx Play is the result of a collaboration between Korg and Toshihide Nakama, the former President of Vestax and co-developer of the original Handy Trax. Developed closely with Nakama as an all-new kind of record player, the Handytraxx Play leverages Korg's unique digital processing and audio technologies while staying true to the spirit of the original Handy Trax. Tragically, Nakama passed away during the development of the Handytraxx Play on June 10th, 2023, but his vision and philosophy live on through this product, carrying his legacy to music lovers worldwide.

Optimised for scratching

The Handytraxx Play has been meticulously designed to provide an exceptional scratching experience. The high-quality fader, developed under Nakama's guidance, offers super smooth, precise motion and minimised silent zones for effortless cuts and transitions. Beginners and seasoned portablists alike will appreciate the responsive feel and the ability to reverse scratch by swapping crossfader channels. Every detail of the fader has been optimised to enhance performance while maintaining the portability that defines the Handytraxx Play.

Unique digital effects

Korg's expertise in digital audio processing brings powerful effects to the Handytraxx Play, elevating its creative potential.

Three types of filters

The Handytraxx Play offers three versatile filter types, each designed to provide dynamic control over your sound. The DJ filter seamlessly blends low-pass and high-pass filters, allowing smooth transitions. The EQ filter with a low isolator enhances bass frequencies for deep, impactful tones. Lastly, the peaking wah filter with modulation adds a unique, expressive touch, letting you shape bold experimental sounds or subtle nuanced effects in real time.
Delay
In addition to filters, the Handytraxx Play features a built-in delay effect that expands your creative possibilities. From creating spacious, ambient soundscapes to bold, metallic echoes, the delay effect can be controlled intuitively using the vertical fader for precise level adjustments.

This seamless integration of effects makes the Handytraxx Play an essential tool to enhance any DJ performance.

Built-in audio looper and versatile playback control

The Handytraxx Play includes a built-in looper that redefines creativity for DJs and vinyl enthusiasts. With its variable speed control switch, the looper lets you capture and replay live playback of a record's sound-a feature known as live looping. This capability allows you to craft unique DJ mixes by adding scratches to a looped beat, recording your favourite sounds to use as a sampler, or even swapping records while the loop continues to play seamlessly. The looper's versatility makes it an essential tool for both experimentation and live performance.

The variable speed control switch provides intuitive options for adjusting playback speed, a fundamental requirement for DJs. You can effortlessly switch between 33 and 45 RPM or fine-tune the variable speed ratio to match your creative needs. This adaptability extends to layering recordings over existing loops- for instance, playing back a beat loop at your chosen speed and overlaying scratching sounds on top. The Handytraxx Play's looper opens new possibilities for musical expression, offering endless opportunities to innovate and perform.

Precision craftsmanship

Every component of the Handytraxx Play has been crafted for superior performance. The custom-designed tonearm offers high-level tracing performance, minimising needle skipping during playback and scratching. A belt-driven motor with digital rotation correction ensures stable platter rotation and quick recovery for incidental effects that sound natural. Refinements to the turntable mechanism further reduce skipping, allowing for consistent, reliable performance during even the most demanding scratch play.

Groove on the go

Designed for ultimate portability, the Handytraxx Play can be powered by the included AC adapter or six AA batteries, giving you the flexibility to take your music anywhere. The built-in 2.5W speaker delivers impressive sound with rich bass and clear playback, whether you're connected to external speakers or not.

Flexible customisation

A redesigned headshell supports both ceramic and MM cartridges*, offering flexibility for various playback styles. Users can replace the scratch fader or reorient the control panel for right- or left-handed use, ensuring comfort and adaptability for every DJ. These thoughtful customisation options make the Handytraxx Play a truly personal and versatile tool, perfect for creating and performing.

* Basic soldering skills are required for replacing ceramic and MM cartridges.

Specifications

Drive system: Belt-driven (with digital rotation correction)
Drive motor: DC servo motor
RPM: 33-1/3, 45 or 78 revolutions per minute
S/N (signal-to-noise) ratio: Less than 60 dB (DIN-B)
Cartridge model: Stereo ceramic cartridge included (MM supported)
Maximum input level: AUX IN: 2.5 Vp
Maximum output level: LINE OUT ? 2.3 Vp, THD 1%, PHONO OUT: 300 mV (1 kHz, 5cm/sec)
PHONO preamp gain: Standard value: 34.5 dB; equalizer characteristics: RIAA
Digital signal processing
A/D, D/A: 44.1 kHz@16-bit, stereo
Crossfader: 44.1 kHz, 32-bit float, stereo
Mix: 44.1 kHz, 32-bit float, stereo
Looper: 44.1 kHz, 16-bit, stereo; max. recording time: approx. 20 sec
Filter: 44.1 kHz, 32-bit float, stereo; type: OFF, FILTER1, FILTER2, FILTER3
Delay: 44.1 kHz, 32-bit float, stereo; feedback (0%-80%), time (1,000 ms-10 ms)

Power consumption: 2.35 W
Power supply: AC adapter (included), six AA batteries (alkaline or nickel-metal hydride) Weight: 2.3 kg/5.07 lb
Dimensions: 370 x 280 x 84 mm/14.57? x 11.02? x 3.30?; with cover on: 370 x 286 x 87 mm/14.57" x 11.26" x 3.43"
Included items AC adapter, AC adapter replacement plug (5 types), dust cover, slip mat, EP adapter, Quick Start Guide

Notes: Excellent value all-rounders from Rode, the NTH-50s offer precise, detailed sound to match their slick, stylish looks. Custom 40mm drivers and ergonomic design provide a nice combination of sound and comfort.

Supplier's Notes:
The NTH-50 professional on-ear headphones combine exceptional sonic performance, superior comfort, and a sleek and durable design that make them the perfect companion for DJs, music producers, content creators and audiophiles. The custom driver array features a revolutionary acoustic design with an innovative resonant chamber, and is precision-tuned for incredibly accurate and detailed audio reproduction with ultra-low distortion. Not only does this result in a more natural sound signature than other on-ear headphones, but it also offers superior external noise isolation. To minimise wearing fatigue and ensure optimal comfort, they feature a contoured headband and an ergonomic earcup structure to reduce pressure on your head and ears during longer sessions. With a lightweight, compact design combined with premium materials and a rugged build, the NTH-50 headphones are with you for the long-haul, ready for the rigours of the road and the studio alike, day in, day out.

Acoustic & electrical specifications

Transducer Size: 40mm
Transducer Type: Dynamic
Operating Principle: Closed
Ear Coupling: Supra-Aural/On-Ear
Frequency Response: 5Hz - 35Khz
Impedance: 32 O
Sensitivity @1mW / 500Hz: 102 dB SPL Sensitivity @1V (RMS) / 500Hz: 117 dB SPL
Total Harmonic Distortion @1mW: < 0.2 % @100Hz < 0.03% @500Hz
Total Harmonic Distortion @100Hz: 0.05% @100dB SPL 0.5% @120dB SPL
Short Term Max Input Power: 100 mW
Long Term Max Input Power: 50 mW
Max SPL: 124 dB SPL
Ambient Noise Attenuation: 21 dBA
Connection Type: Dual TRRS Cable Attachments

Mechanical specifications

Weight (grams): 220
Cable Length: 1.7m coiled cable
Included Accessories:
1 x Headphone Cable
1 x 3.5mm to 1/4-inch Adaptor
1 x Storage Pouch
1 x COLORS ID Set

What's in the box

1 x NTH-50 Headphones
1 x Storage Pouch
1 x Headphone Cable
1 x COLORS ID Set
1 x 3.5mm to 1/4-inch Adaptor

Notes: Experience ultimate flexibility with the UDG DIGI Laptop Stand, designed for mobile DJs and music producers. Its fully adjustable height, angle, and 360-degree swivel tray accommodate laptops, tablets, or small controllers up to 18 inches. Featuring an anti-slip mat and rubberized edges, it ensures your gear stays secure and scratch-free. The tray's design promotes optimal airflow to prevent overheating, while the removable sub-tray offers additional space for essential accessories like USB hubs, external hard drives, or sound cards. Portable and easy to set up in either the C or Z configuration, it folds flat for effortless transport and comes with a protective cover making it the perfect companion for your gigs.

Specifications

Colour: Black
Weight: 1.9 kg / 4.19 lb
Outer Dimensions (W x H x D)
Folded: 36.0 x 27.0 x 4.0 cm | 14.1 x 10.6 x 1.6 inch
Fully Extended: 36.0 x 27.0 x 40.0 cm | 14.1 x 10.6 x 15.7 inch
Laptop Shelf: 20.0 x 24.0 cm | 7.9 x 9.4 inch
Material: Sturdy powder-coated steel

Protection
Solid and easy to assemble, the perfect laptop stand for DJs/producers
Airflow designed tray prevents overheating of equipment
Tray features non-slip mat and rubberized edges to prevent equipment from sliding out and scratching
Well-designed knobs, locking clips and adjustment sleeve to improve grip comfort

Extras
Adjustable height and tilt
Rotating tray
Removable sub-tray
Protective sleeve included

Fits
Fits 13" - 18" laptops, tablets or small controllers
Maximum load: 12 kg / 26.46 lbs

Notes: Tired of spending ages just to transfer 100 tracks to your USB from Rekordbox? Most USB drives aren't designed with DJs in mind. What really impacts speed isn't always advertised many drives handle large files well (like videos) but struggle with rapid updates of multiple small files, like track metadata, cue points, and analysis data.

For DJs, efficiency is everything. Your library needs to update, transfer, and sync seamlessly - because every second on stage matters.

These drives have been pushed to the limit with over 350 hours of nonstop DJ sets across two weeks, tested on Pioneer DJ and Denon DJ standalone units and media players. They've endured intense media recording, including DJ performances and 4K ProRes video capture, alongside rigorous Stressdisk tests to verify long-term memory durability.

Designed to withstand extreme conditions, they've been exposed to high heat and dust in the Black Rock Desert, and subjected to 500+ cycles of plugging and unplugging to simulate years of real-world use. Built for DJs who demand reliability in any environment.

This drive is pre-formatted in FAT32 to ensure seamless performance across all DJ equipment. While some newer setups support ExFAT or HFS, FAT32 remains the most reliable option for full compatibility even with gear that's a few years old.

To maintain optimal performance and prevent potential library issues, it's recommended to keep 10-15% of the storage free. This ensures smooth operation and a hassle-free DJ experience.

Notes: Heavyweight 100% cotton t-shirt made in the USA with a silkscreen print of the Disk Union logo.

Notes: Cherry Moon Records logo slipmat for your turntables (pair)

Notes: The slipmats combine functionality and design in an ideal way. The exclusive black/white print in the Eye-Pyramid Artwork gives your DJ setup a striking and unique look.

The slipmats reduce static charge, which not only extends the lifespan of your records but also protects your turntable. They are also essential for special DJ techniques such as scratching and backspin, as without slipmats, they can cause damage to your vinyl records.

These slipmats are crafted with the highest precision in Belgium and are known for excellent workmanship, durable material, and outstanding value for money. They come delivered in a convenient double pack.

Notes: These slipmats combine functionality and style. The exclusive "FuckYou" print on a black background makes a bold statement and ensures a unique look on any DJ setup.

Slipmats minimize static electricity and help extend the lifespan of your records and equipment. They also allow for special DJ techniques, like scratching or backspins, which would otherwise permanently damage your beloved records without slipmats.

Our slipmats are made and printed in Belgium. In addition to the high-quality print and durable material, they stand out with an attractive price-performance ratio. They are delivered as a double pack.

Notes: These slipmats combine functionality and style in the perfect way. The exclusive orange "Technics" print on a black-grey camouflage background creates a unique and distinctive look that enhances any DJ booth.

By using slipmats, static charges are minimized, which extends the lifespan of your records and equipment. They also enable special DJ techniques like scratching or backspin, which could otherwise cause long-term damage to your vinyl records without slipmats.

These slipmats are manufactured and printed in Belgium. They stand out for their high-quality craftsmanship and durable material, while offering an excellent price-performance ratio. The product comes in a practical double pack.

Notes: The Technics slipmats combine functionality and style in one. The exclusive white "Technics" print on a multicoloured camouflage background creates a distinctive look that enhances any DJ setup.

By using slipmats, static charge is reduced, which not only extends the lifespan of your vinyl records but also your equipment. They also enable special DJ techniques like scratching and backspin, which would cause long-term damage to your records without slipmats.

These slipmats are made and printed in Belgium. They are known for their high-quality craftsmanship, durable material, and excellent value for money. The delivery comes in a convenient double pack.

Notes: These slipmats combine functionality with style. The exclusive "Technics" print on a black-grey camouflage background creates an exceptional look, perfect for any DJ booth.

Thanks to the slipmats, static charge is reduced, which prolongs both the lifespan of your records and your turntable. They also enable special DJ techniques such as scratching or backspin, which would cause long-term damage to your records without slipmats.

These slipmats are manufactured and printed in Belgium. They stand out not only for their high-quality craftsmanship and durable material, but also for offering an excellent price-performance ratio. They are delivered in a practical two-pack.

Notes: The Technics Slipmats combine functionality and style in the ideal way. The exclusive white "Technics" print on a pink camouflage background gives your DJ setup a unique and eye-catching look.

By using slipmats, static charge is reduced, which not only extends the life of your records but also protects your equipment. They also enable special DJ techniques such as scratching and backspin, which would cause long-term damage to your records without slipmats.

These slipmats are manufactured and printed in Belgium. They impress with their top-notch craftsmanship, durable material, and excellent value for money. The delivery comes in a convenient double pack.

Notes: The Technics slipmats combine functionality and style at the highest level. The exclusive, two-tone "Technics" print on a black background creates a striking, unique look that enhances any DJ setup.

By using the slipmats, static charge is reduced, which not only extends the life of your records but also protects your turntable. Additionally, they enable special DJ techniques such as scratching and backspin, which would cause long-term damage to your records without slipmats.

These slipmats are made and printed in Belgium. They impress with their excellent craftsmanship, durable material, and outstanding value for money. The delivery comes in a convenient twin pack.

Notes: The Technics slipmats combine functionality and style at the highest level. The exclusive, two-tone "Technics" print on a black background gives them a stylish and unique look that perfectly complements your DJ setup.

By using slipmats, static charge is reduced, which not only extends the lifespan of your records but also protects your turntable. They also enable special DJ techniques like scratching and backspin, which would cause long-term damage to your records without slipmats.

Our slipmats are made and printed in Belgium. They are characterized by excellent craftsmanship, durable material, and an outstanding price-performance ratio. The delivery comes in a practical double pack.

Notes: The Technics slipmats combine functionality and style at the highest level. The exclusive white "Technics" print on a black spiral background creates a stylish and unique look that perfectly complements your DJ setup - especially when the slipmat spins on the turntable.

By using the slipmats, static charge is reduced, which not only extends the lifespan of your records but also protects your turntable. They also enable special DJ techniques such as scratching and backspin, which would cause damage to your records over time without slipmats.

These slipmats are made and printed in Belgium. They impress with their excellent craftsmanship, durable material, and great value for money. The delivery comes in a convenient double pack.

Notes: The Technics slipmats combine functionality and style at the highest level. The exclusive white "Technics" print on a black/white, spiral background creates a striking look that perfectly complements your DJ setup - especially when the slipmat spins on the turntable and the spiral background starts moving.

By using the slipmats, static charge is reduced, which extends the lifespan of both your records and your turntable. In addition, they enable special DJ techniques such as scratching and backspin, which could otherwise cause long-term damage to your records without slipmats.

These slipmats are manufactured and printed in Belgium. They impress with their excellent craftsmanship, durable material, and outstanding value for money. The delivery comes in a convenient double pack.

Notes: The Technics slipmats perfectly combine functionality and design. The exclusive "Technics" print in white on a black-and-white, serrated background creates a unique, eye-catching look. Especially when the slipmats spin, the patterns generate a hypnotizing effect that visually enhances the DJ setup.

The slipmats reduce static charge, which not only extends the lifespan of your records but also protects your turntable. They are also essential for special DJ techniques like scratching and backspin, which can damage your records without slipmats.

These slipmats are manufactured in Belgium with the highest precision. They are characterized by their excellent craftsmanship, durable material, and outstanding value for money. The delivery comes in a convenient double pack.

Notes: The Technics Slipmats combine functionality and style in an ideal way. The exclusive white-blue "Technics" print on a circular, black-red background gives your DJ setup a unique and distinctive look.

Using the slipmats reduces static charge, which extends the lifespan of your records as well as your turntable. They also allow for special DJ techniques like scratching and backspin, which would cause long-term damage to your records without slipmats.

These slipmats are manufactured and printed in Belgium. They impress with their excellent craftsmanship, durable material, and outstanding value for money. The product is delivered in a practical twin pack.

Notes: The Technics Slipmats perfectly combine functionality and design. The exclusive "Technics" print in white on a striking black-blue background with warp patterns gives them a distinctive look that makes your DJ setup even more impressive.

Thanks to the slipmats, static charge is reduced, which not only extends the lifespan of your records but also that of your turntable. They are also essential for special DJ techniques like scratching and backspin, as using turntables without slipmats can cause damage to your vinyl records.

These slipmats are made in Belgium with the highest precision and offer excellent craftsmanship as well as an outstanding price-performance ratio. The delivery comes in a convenient double pack.

Notes: The Technics slipmats perfectly combine functionality and design. The exclusive "Technics" print in white on a beige leopard-style background gives your DJ setup a unique and eye-catching look.

The slipmats reduce static charge, which extends the lifespan of both your records and your turntable. They are also essential for DJ techniques like scratching and backspin, as using a turntable without slipmats could damage your records.

These slipmats are made in Belgium with the highest precision and are known for their excellent craftsmanship and durable material, while offering an excellent price-performance ratio. They are delivered in a convenient double pack.

Notes: The Technics slipmats perfectly combine functionality and design. The exclusive "Technics" print in white on a black/white zebra background gives your DJ setup a unique and eye-catching look.

The slipmats reduce static charge, which not only extends the lifespan of your records but also protects your turntable. They are also essential for special DJ techniques like scratching and backspin, as without slipmats, they can cause damage to your vinyl records.

These slipmats are manufactured with the highest precision in Belgium and impress with their excellent craftsmanship and durable material, while offering an excellent price-performance ratio. The product is delivered in a convenient double pack.

Notes: Configured specifically for DJs, the superb TMA-2 modular headphones are offered here in DJ Wireless 'preset', featuring ultra-low-latency high-fidelity performance.

Supplier's Notes:
Danish audio company AIAIAI, known for pushing the boundaries in professional audio, is expanding the possibilities of music performance by releasing TMA-2 DJ Wireless - the world's first headphones specifically designed for wireless DJing. Now DJs can finally confidently free themselves from the cable, without compromise.

What truly sets the TMA-2 DJ Wireless apart is its groundbreaking ultra-low latency wireless technology, delivering a delay-free experience for precision beatmatching and cable-free mixing. Coupled with over 25 hours of battery life, they offer uninterrupted performance for lengthy sets.

TMA-2 DJ Wireless deliver professional-grade sound, tuned for powerful bass and clear treble, with high sound isolation to cut through the noise of any environment. Designed with durability in mind, the TMA-2 DJ Wireless builds on over a decade of proven TMA-2 DJ performance, featuring a robust yet lightweight construction that ensures long-lasting comfort during extended sets.

"With the TMA-2 DJ Wireless, we set out to create wireless DJ headphones that truly meet the demands of DJs. For years, wireless technology meant compromising on performance, but with our ultra-low latency wireless technology, we are finally able to deliver a solution that offers both Freedom and precision. This is a game-changer for DJs looking to break free from cables" - Frederik Jorgensen, Founder

Notes: Upgrade any pair of AIAIAI's excellent TMA-2 headphones to high-definition wireless with the S11 and X03 bundle. AIAIAI's W+ Link protocol offers ultra-low latency, lossless sound.

Supplier's Notes:
Combine the upgrade kit with your headband and ear pads from any TMA-2 headphone to go wireless. Experience ultra-low latency wireless performance with more than 20 hours of battery life for uninterrupted sessions. Includes two S11 speaker drivers and the X03 W+ Link Transmitter.

Fully compatible with the TMA-2 Modular system Ultra-low latency wireless audio for cable free performance Powerful, detailed sound tuned to clearly present bass and treble details in loud venues Seamlessly switch between W+ Link for performing and Bluetooth for listening on the go Use the AIAIAI app EQ to shape the sound to your preference

Notes: Great value from Hercules's entry-level DJ headphones. Based on well-established industry standard design, the HDP DJ60s feature loud, clear drivers and fully adjustable jogwheel-style ear cups.

Supplier's Notes:
Hercules, a manufacturer of DJ equipment since 2003, is expanding its product line with the Hercules HDP DJ60 closed-back circumaural headphones. With their comfortable pivoting earcups, these headphones are designed for advanced DJs who need powerful sound that can still be heard above the noise during live performances.

These high-quality headphones fold up for easy transportation and come with a 6.35mm (1/4") jack adapter to plug into any type of device. The advanced drivers deliver an accurate high-quality audio to cover the full audio spectrum. With their DJ design and jogwheel-like earcups, these headphones will appeal to both budding DJs who want to invest in professional quality headphones, and advanced DJs who mix for live audiences.

With better sound isolation and improved comfort, plus improved drivers, these headphones deliver a wider frequency range than their little brother, the Hercules HDP DJ45. Wide-range sound: from the low to the high frequencies: 15Hz-22kHz High-sensitivity headphones, 105dB @ 1vrms, to be clearly audible in any environment Excellent noise isolation: closed-back headphones, circumaural design Comfortable: very soft padding on the earcups on the underside of the headband Wired: spiral cable that can stretch up to 3m (9.8 feet) Convenient: wire on one side only, pivoting earcups, and foldable headphones for easy transportation Adapter included: 3.5mm (1/8") stereo jack output + 6.35mm (1/4") stereo jack adapter.

Notes: Includes .34 oz of cleaning fluid and a dense anti-static nylon bristled brush. Comes with a cotton drawstring bag for storage.

Notes: Groovy Stylus Cleaning Fluid 2 fl. oz.

Use with Stylus Cleaning Kit ASCK.

Notes: Kit comes with a 2 oz spray bottle of Groovy cleaning fluid, an 8 x 9" microfiber cleaning cloth, an anti-static micro-bristled cleaning brush, and a cotton storage bag. Groovy Cleaner is specially formulated for its deep-cleaning, anti-static, residue-free properties.

Notes: This soft microfiber cloth lubricates the record as it cleans it. The super fine strands of microfiber material reach deeply into the grooves of the record and actually grab and lift out dust and debris.

Notes: This soft microfiber cloth lubricates the record as it cleans it. The super fine strands of microfiber material reach deeply into the grooves of the record and actually grab and lift out dust and debris.

Notes: Use these machine washable cloths for dusting and wet or dry cleaning of CDs or vinyl records. The super fine strands of microfiber material reach deeply into the grooves of the record and actually grab and lift out dust and debris.Use with our Groovy cleaning solution. Can also be used on 78 rpm Records, CDs & DVDs.

Vinyl Record Microfiber Cleaning Cloths - black
Three DRY Clothsper pack
6 x 7". Lint-free, non-abrasive.

Notes: Use these machine washable cloths for dusting and wet or dry cleaning of CDs or vinyl records. The super fine strands of microfiber material reach deeply into the grooves of the record and actually grab and lift out dust and debris. Use with the Groovy cleaning solution. Can also be used on 78 rpm Records, CDs & DVDs.

Vinyl Record Microfiber Cleaning Cloths
Three DRY Clothsper pack
6 x 7". Lint-free, non-abrasive.

Notes: Goldring, a globally recognised name in the world of analogue audio and renowned for its precision-engineered phono cartridges and turntables, introduces its EXTRACT Stylus Cleaning Kit.

An essential tool kit for any vinyl enthusiast, EXTRACT offers everything you need to keep your turntable cartridge stylus in pristine condition.Whether performing daily routine maintenance or tackling a more thorough deep clean, this kit ensures your delicate stylus stays in peak condition, without the risk of damage.

Working seamlessly with all stylus and cartridge types, the EXTRACT Stylus Cleaning Kit consists of a magnifying lens, an anti-static stylus cleaning brush and a cleaning gel pot.

These indispensable tools arrive in a handcrafted storage box, designed to protect them in transit and keep everything neatly organised when not in use

Notes: Excellent value as usual from Omnitronic, the PM-202F is a simple, affordable mixer ideal for basic DJing and live sound control. Two channels, microphone input and Bluetooth streaming add up to a versatile setup at a great price.

Supplier's Notes:
Two channel mixer ideal for mobile DJ setups and home use.

Technical specifications

Power supply: 100-240 V AC, 50/60 Hz
Power consumption: Max. 8 W
Protection class: Protection class II
Power connection: Mains input via C8 (M) "figure 8" mounting version power supply cord with Euro plug (provided)
Frequency range: 20 - 20000 Hz
S/N ratio: >80 dB
THD: <0,1 % at 1 kHz
DJ filter: Per channal: LPF/HPF bipolar,
Control: Bluetooth
Bluetooth device name: PM-202F
Range: Bluetooth: range up to 15m
Crosstalk: >60 dB
Control elements: Crossfader, Crossfade curve control, crossfade reverse switch, FX Parameter control, power switch
Status LED: Power, master level meter
Connections: Input: line/phono via 2 x stereo RCA
Input: line via 2 x stereo RCA
Input: microphone via 1 x 3-pin XLR (F) mounting version
Input: antenna via 1 x SMA (F) mounting version
Input: Earthing connection via 2 x screw terminal
Output: master via 2 x 3-pin XLR (M) mounting version
Output: master via 1 x stereo RCA
Output: rec. via 1 x stereo RCA
Output: headphones via 1 x 6.3 mm jack socket (stereo) mounting version
Output: headphones via 1 x 3.5 mm jack (stereo) mounting version
Channels: Input channel: 2 x stereo with Line-Line/Phono-Bluetooth switch via RCA, channel control via 60mm fader, 2-band tone control EQ, gain control, CUE switch
Microphone channel: 1 x mono via XLR, channel control via rotary dial, 2-band tone control EQ
Master output: 1 x stereo via XLR or RCA, channel control via rotary dial, balancecontrol
Headphones output: stereo via jack, channel control via rotary dial, cue mix function
Rec. output: stereo via RCA
Material: Metal
Colour: Black
Housing design: Desktop console housing

Dimensions:

Length: 30,5 cm
Width: 19,0 cm
Height: 11,0 cm
Weight: 2,18 kg

Power cord
Cable length: 2,10 m detachable

Notes: A solid all-round DJ mixer at a very good price, the PM-202FX is a two-channel design equipped with built-in digital effects to expand your creative options when mixing. Dedicated filter controls for each channel add versatility.

Supplier's Notes:
Two channel mixer ideal for mobile DJ setups and home use.

Power supply: 100-240 V AC, 50/60 Hz
Power consumption: Max. 8 W
Protection class: Protection class II
Power connection: Mains input via C8 (M) "figure 8" mounting version power supply cord with Euro plug (provided)
Frequency range: 20 - 20000 Hz
S/N ratio: >80 dB
THD: <0,1 % at 1 kHz
DJ filter: Per channel: LPF/HPF bipolar,
DJ-FX: Master: CHORUS, REVERB, DELAY, FLANGER
Master: WHA, PHASE,
Control: Bluetooth
Bluetooth device name: PM-202FX
Range: Bluetooth: range up to 15m
Crosstalk: >60 dB
Control elements: Crossfader, Crossfade curve control, crossfade reverse switch, FX Parameter control, power switch
Status LED: Power, master level meter
Connections: Input: line/phono via 2 x stereo RCA
Input: line via 2 x stereo RCA, microphone via 1 x 3-pin XLR (F) mounting version, antenna via 1 x SMA (F) mounting version, Earthing connection via 2 x screw terminal
Output: master via 2 x 3-pin XLR (M) mounting version, master via 1 x stereo RCA, rec. via 1 x stereo RCA, headphones via 1 x 6.3 mm jack socket (stereo) mounting version, headphones via 1 x 3.5 mm jack (stereo) mounting version
Channels: Input channel: 2 x stereo with Line-Line/Phono-Bluetooth switch via RCA, channel control via 60mm fader, 2-band tone control EQ, gain control, CUE switch
Microphone channel: 1 x mono via XLR, channel control via rotary dial, 2-band tone control EQ
Master output: 1 x stereo via XLR or RCA, channel control via rotary dial, balance control
Headphones output: stereo via jack, channel control via rotary dial, cue mix function
Rec. output: stereo via RCA
Material: Metal

Colour: Black
Housing design: Desktop console housing
Dimensions: Length: 30,5 cm
Width: 19,0 cm
Height: 11,0 cm
Weight: 2,18 kg

Power cord

Cable length: 2,10 m detachable

Notes: Part of Resor's exceptional line-up of boutique, audiophile-standard rotary mixers, the 3300 is a four-channel design with three-band channel EQs, three-band master isolator and sweet sound quality.

Supplier's Notes:
The Resor 3300 is Resor's latest addition to the rotary mixers. It features a fully discrete class-A Master Isolator, 3-Band EQ per channel, a dedicated Microphone input with volume control, four Phono/Line preamps, Urei-style knobs, and more.

With this model, Resor bring an all-new discrete master Isolator developed over six months. The new class-A circuitry carries over the 24 dB /Oct filters, crossover frequencies, bypass Relay, and a "full cut" to a maximum boost of +12 dB. With the staggering number of components, including 28 BJT and 32 FET transistors, Resor have achieved outstanding performance in sound and measures.

The 3-band channel EQ is an entirely new design. It brings a fresh set of frequency curves and attenuation levels across all three bands, a lower noise floor, and retaining the discrete Op-Amp on duty.

There is a different curve across these two segments, with the Isolator having a more pronounced sweep and colour. In use, this means that per channel, you get to craft your sound via the EQ and then craft further still with a different tonal balance with the Isolator.

Across the EQ and Isolator, plenty of headroom is available across all frequency ranges, providing plenty of control when crafting the audio.

Each of its four channels features hi-fi Phono and Line inputs. With Phono preamps delivering 44 dB of Gain, both vinyl and digital are well-balanced. Further refinements on the Phono preamps gave us even more pleasing dynamics, headroom, and a broader frequency spectrum.

Resor offer an additional element of customisation that one can specify when they place their order, ranging from adding an FX-bus, changing the combination of colours for the faceplate to different wood finishes and knob options.

Inputs

Channels 1-4: selectable PHONO & LINE (RCA)
Microphone: dedicated XLR with own control

Outputs

Master 1: Balanced XLR
Master 2: Unbalanced RCA
Booth: Balanced TRS
Rec: Unbalanced RCA

Channel EQ

3 Band Baxandall: Bass +/- 18 dB (at 150 Hz), Mids +/-
10 (at 800 Hz), Treble: +/- 10dB (at 10 kHz)

Master isolator

Fully discrete class-A circuitry
3 Band, 24 dB /Oct, Linkwitz-Riley filters, crossover
frequencies at 310 Hz and 3100 Hz,
Full-cut to maximum +12 dB, ON/OFF true bypass with
Audio Grade Relay

Master insert

Out: Stereo TRS (Tip - Left, Ring - Right, Sleeve - Ground) - post Master Isolator
In: Stereo TRS (Tip - Left, Ring - Right, Sleeve - Ground) - pre Outputs

3300 FX (Send and Return)

Effects Out: Stereo TRS (Tip - Left, Ring - Right, Sleeve - Ground)
Effects In: Stereo TRS (Tip - Left, Ring - Right, Sleeve - Ground)

Customisations

Wood: Natural Oak, Matte Black, Walnut
Faceplate (Matte Aluminum): Black, Bronze, SIlver;
Premium Metallic Red, Metallic Green, Metallic Blue
Knobs style: Resor Standard, Urei knobs; Premium
knobs: Silver Matte Aluminum, Black Matte Aluminum
VU-Meters: Standard, 4x Round (one per channel)

Other

2 x Analog VU Meters (1VRMS = 0db)
Cue/Mix Switch for the VU Meters, to display either the
Cue or Mix signals
Rotary Switch to CUE between all four Channels
Cue/Mix Blend potentiometer
Audio Grade external Power Supply Unit
3 Years International Warranty

Line Inputs

Discrete, Class-A Op-Amps
Measured Line In to Master Out:
Frequency response +/- 0,3 dB, 20 Hz to 20 kHz
THD+N better than 0,004 %
SNR better than -95 dB

Phono Inputs

Discrete, Class-A Op-Amps, Gain 44 dB
Passive RIAA Equalization, polypropylene capacitors, close tolerance
Input impedance is 47 kohm
Input capacitance is 47 pF
Measured Phono In to Master Out:
RIAA accuracy within +/- 0,3 dB (20 Hz - 20 kHz)
THD+N better than 0,02 %
SNR better than -77 dB
Maximum input signal level before distortion 100 mVRMS

Master Output

Balanced XLR
Unbalanced RCA L and R
Impedance < 300 ohm

Booth Output

Balanced TRS
Impedance < 300 ohm

Record Output

Nominal level -10dBV
Impedance < 300 ohm

Crosstalk

Channel Fader offness < -100 dB
Channel L/R separation <-70 dB
Isolator offness < -90 dB

Dimensions

330 mm (W), 275 mm (D), 98 mm (Height - measured from the faceplate and including the rubber feets)

Weight

Mixer: 5.3 KGS
Power Supply: 1 KGS
With travel case: 11 KGS

Notes: Are you a digital DJ/producer looking for a professional, durable case solution for your AlphaTheta DDJ-FLX2? Then look no further, UDG has developed a super lightweight EVA hard case designed for life on the road. Constructed from durable, lightweight compression-moulded EVA material with a laminated durable fabric exterior, this case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the AlphaTheta DDJ-FLX2, this case is perfect for the traveling DJ/producer who needs to protect their equipment.

Specifications

Colour: Black
Weight: 0.54 kg / 1.19 lb
Outer Dimensions (W x H x D): 39.8 x 22.3 x 7.2 cm | 15.6 x 8.8 x 2.8 inch
Inner Dimensions (W x H x D): 38.8 x 21.3 x 4.8 cm | 15.3 x 8.4 x 1.9 inch
Material: Durashock moulded EVA foam

Protections

Cover main material 600D polyester with 5 mm EVA durashock molded body
Water repellent durable fabric exterior
Black soft fleece interior
Protective egg-crate foam prevent damage from vibrations & shocks

Extras

Removable interior USB drive/SD card pouch
Convenient carry handles
Easy grip zipper pulls

Fits

AlphaTheta DDJ-FLX2