Back catalogue: All genres

Notes: ***B-STOCK: Box damaged, product unused & in perfect condition***


Building on the reputation of its award-winning predecessors, the Erisr Studio 5 is a substantial update that delivers richer low-end and more controlled high-frequency response that reproduces every detail in your recordings with a natural sound unparalleled in its class. Designed for superior performance in both home studio and small professional mix rooms, the Eris Studio 5 combines flexible connectivity with sonic accuracy that puts it a class all its own.

The custom-designed EBM (Elliptical Boundary Modeled) waveguide provides superior high-frequency response and wide 100-degree horizontal dispersion to create a broader sweet spot. Narrow vertical dispersion reduces reflections from your desk, and a silk-dome tweeter ensures snappy, accurate transient reproduction. An elegant new enclosure design improves the waveguide performance so you'll hear the finest details in your mix.

The woven-composite low-frequency driver offers Eris' signature tight, clear bass with plenty of punch. Its 80W of biamped power make the Eris Studio 5 more efficient than previous designs. The ported enclosure maximizes bass response and allows the Eris Studio 5 to reach down to an astonishing 48 Hz - without a subwoofer!

Flexible input options let you connect almost any line-level source, from mixers to audio interfaces and more. You'll have no problem hooking your Eris speakers up to virtually anything.

Features

5.25-inch woven composite low-frequency driver
1-inch, ultra-low mass, silk-dome, high frequency driver
Crossover Frequency, 3.5 kHz
100- x 60- EBM waveguide provides a sweet spot
Front-firing acoustic port for superior bass-frequency reproduction and optimized, resonance-suppressing internal bracing
80W, Class AB dual amplification
48 Hz to 20 kHz frequency response
102 dB Peak SPL (@ 1 meter)
Acoustic Tuning Controls:
Acoustic Space (Flat, -2 dB, -4 dB)
High Frequency (+/-6 dB, center 10 kHz, continuously variable)
Mid Frequency (+/-6 dB, center 1 kHz, continuously variable)
Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)

Inputs:
XLR and 1/4-inch TRS balanced rear-panel inputs
RCA unbalanced rear-panel inputs

Protection:
RF interference
Output-current limiting
Over-temperature
Turn-on/off transient
Subsonic filter
Power Saver mode (engages after 40 minutes)

Set up your studio monitors for your room.

Erisr Studio 5 active monitors are equipped with Acoustic Tuning controls to ensure the flattest response in your mix environment. You get Low Cut, Mid, and High controls, as well as three-way Acoustic Space tuning that makes it easy to compensate for the boundary bass boost that occurs when a speaker is placed too close to a wall.

Honest. Expressive. Powerful.

Like all PreSonus studio monitors, the Eris Studio 5 offers consistent, accurate listening. Their stylish design makes them a welcome addition to any mix space and their smooth, incredibly even frequency response ensures that your mixes will sound great everywhere.

Specs

Electronics
Voltage: 220-240V UK
Wattage: 80 Watts
Input impedance: 10kO

Performance

Peak SPL: 102 dB (@ 1 meter)

Speakers
Crossover frequency: 3.5 kHz
Coverage pattern: 100 degree (H) x 60 degree (V)

Hardware
Cabinet material: Vinyl-Laminated, Medium-Density Fiberboard

Audio controls: Volume High Frequency (+/-6 dB, center 10 kHz, continuously variable) Mid Frequency (+/-6 dB, center 1 kHz, continuously variable)

Audio switches: Acoustic Space (Flat, -2 dB, -4 dB) Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)

Monitor inputs: 1- Balanced XLR, 1- Balanced 14" TRS, 1- Unbalanced RCA

Power amplifier type: Class AB

Measurements

Dimensions: 11.50 x 8.00 x 8.80 in

Product depth: 8.78" (22.3 cm)
Product height: 11.5" (29.2 cm)
Product width: 8" (20.32 cm)

Notes: The Magnetic Mount is a versatile magnetic mounting system for attaching microphones, lights and other accessories to any MagSafer iPhoner or other smartphone with a magnetic case. It features an ultra-strong magnet for complete security, even with vigorous use, and comes with three removeable attachments for maximum flexibility. This includes both short and long cold shoe arms for shooting in landscape or portrait mode, plus a long arm for mounting your smartphone onto a tripod, handle or desktop arm for use in a wide range of video or content creation applications.

Mechanical specifications- Magnetic Mount

Weight (grams): 75
Dimensions (millimetres):
Length: 57
Width: 12
Height: 57

Mechanical specifications- long cold shoe arm

Weight (grams): 15
Dimensions (millimetres): Length: 22
Height: 97

Mechanical specifications- short cold shoe arm

Weight (grams): 9
Dimensions (millimetres): Length: 22
Height: 52

Mechanical specifications - 14 inch tripod mount

Weight (grams): 31
Dimensions (millimetres): Length: 28
Height: 113

What's in the box

1 x Magnetic Mount
1 x Long Cold Shoe Arm
1 x Short Cold Shoe Arm
1 x 1/4-inch Tripod Mount

Notes: A workhorse studio condenser microphone with a warm, silky character, exceptionally low noise and high SPL handling - ideal in a wide range of studio applications.

The World's Most Popular Studio Microphone

Since it launched over 30 years ago, the NT1 has become the world's most popular studio microphone and the go-to for countless creators across the globe - from bedroom musicians and studio professionals to streamers, podcasters and voice over artists. The NT1 Signature Series carries on this legacy, delivering classic studio sound for today's creators.

Iconic Signature Sound

Featuring our stunning HF6 1-inch true condenser capsule, the NT1 Signature Series boasts the same iconic sound signature that its forebears are revered for. Sparkling top end, highly detailed midrange, and rich, warm bass make it shine in almost any recording application you can imagine - from vocals, piano and acoustic guitar to drums, percussion and electric guitar.

Your Mic, Your Way

For the first time in the NT1's 30-year history, this iconic microphone is available in a range of iconic colours. This limited-edition collection features five vibrant colourways alongside the timeless black finish, including red, green, purple, pink and blue.

A True Workhorse

A true workhorse that excels in a wide range of studio applications. With an exceptionally low noise floor and incredibly high max SPL, it captures everything from whispers to drums with the utmost clarity. The perfect all-rounder studio microphone.

Legendary RODE Quality

The NT1 Signature Series is designed and made using the highest-grade components in RODE's precision manufacturing facilities in Sydney, Australia. It's built to last, with a rugged body machined from high-grade aluminium and comes with our industry-leading 10-year warranty, so you can rest assured it will remain your go-to for the long haul.

Premium Accessory Kit

Keep your recordings pristine with the studio-grade shock mount and pop filter included with the NT1 Signature Series, the perfect tools for minimising audio artifacts caused by knocks, rumbles and plosives. It also ships with a premium XLR cable so you can start creating right away - just plug straight into your audio interface or mixer and start recording exceptional audio.

Key Features

Large-diaphragm cardioid condenser microphone
HF6 1-inch true condenser capsule, precision engineered to sub-micron tolerances
Tight cardioid polar pattern for excellent background noise rejection
Classic NT1 sound signature - rich, warm bass, detailed midrange and sparkling highs for exceptional performance in a wide range of studio applications
Smooth frequency response and high sensitivity for incredible balance and clarity
Extremely low noise (4dBA) - the world's quietest studio condenser microphone
High SPL handling capabilities (142dB) for capturing very loud sound sources
Studio-grade shock mount and pop filter and premium XLR cable included
Available in classic black or a range of limited-edition colours, including red, green, purple, pink and blue
Rugged aluminium body with a high-grade finish - incredibly resistant to scuffs and scratches
Industry-leading 10-year warranty
Designed and made in RODE's precision manufacturing facilities in Sydney, Australia

Acoustic & Electrical Specifications

Acoustic Principle: Pressure gradient
Active Electronics: JFET impedance converter with bipolar output buffer
Capsule: 1.00"
Polar Pattern: Cardioid
Address Type: Side
Frequency Range: 20Hz - 20kHz
Output Impedance: 100O
Maximum SPL: 142 dB SPL
Equivalent Noise (A-Weighted): 4dBA
Sensitivity: -32 dB re 1 Volt/Pascal (25 mV @ 94 dB SPL) +/- 2 dB @ 1 kHz
Analogue Power Requirements: P48
Analogue Output Connection: 3-pin XLR

Mechanical

Weight (grams): 313

Dimensions (millimetres)
Length: 52
Width: 52
Height: 189

What's in the Box
1x NT1 Signature Series
1x SM6
1x XLR Cable

Notes: A workhorse studio condenser microphone with a warm, silky character, exceptionally low noise and high SPL handling - ideal in a wide range of studio applications.

The World's Most Popular Studio Microphone

Since it launched over 30 years ago, the NT1 has become the world's most popular studio microphone and the go-to for countless creators across the globe - from bedroom musicians and studio professionals to streamers, podcasters and voice over artists. The NT1 Signature Series carries on this legacy, delivering classic studio sound for today's creators.

Iconic Signature Sound

Featuring our stunning HF6 1-inch true condenser capsule, the NT1 Signature Series boasts the same iconic sound signature that its forebears are revered for. Sparkling top end, highly detailed midrange, and rich, warm bass make it shine in almost any recording application you can imagine - from vocals, piano and acoustic guitar to drums, percussion and electric guitar.

Your Mic, Your Way

For the first time in the NT1's 30-year history, this iconic microphone is available in a range of iconic colours. This limited-edition collection features five vibrant colourways alongside the timeless black finish, including red, green, purple, pink and blue.

A True Workhorse

A true workhorse that excels in a wide range of studio applications. With an exceptionally low noise floor and incredibly high max SPL, it captures everything from whispers to drums with the utmost clarity. The perfect all-rounder studio microphone.

Legendary RODE Quality

The NT1 Signature Series is designed and made using the highest-grade components in RODE's precision manufacturing facilities in Sydney, Australia. It's built to last, with a rugged body machined from high-grade aluminium and comes with our industry-leading 10-year warranty, so you can rest assured it will remain your go-to for the long haul.

Premium Accessory Kit

Keep your recordings pristine with the studio-grade shock mount and pop filter included with the NT1 Signature Series, the perfect tools for minimising audio artifacts caused by knocks, rumbles and plosives. It also ships with a premium XLR cable so you can start creating right away - just plug straight into your audio interface or mixer and start recording exceptional audio.

Key Features

Large-diaphragm cardioid condenser microphone
HF6 1-inch true condenser capsule, precision engineered to sub-micron tolerances
Tight cardioid polar pattern for excellent background noise rejection
Classic NT1 sound signature - rich, warm bass, detailed midrange and sparkling highs for exceptional performance in a wide range of studio applications
Smooth frequency response and high sensitivity for incredible balance and clarity
Extremely low noise (4dBA) - the world's quietest studio condenser microphone
High SPL handling capabilities (142dB) for capturing very loud sound sources
Studio-grade shock mount and pop filter and premium XLR cable included
Available in classic black or a range of limited-edition colours, including red, green, purple, pink and blue
Rugged aluminium body with a high-grade finish - incredibly resistant to scuffs and scratches
Industry-leading 10-year warranty
Designed and made in RODE's precision manufacturing facilities in Sydney, Australia

Acoustic & Electrical Specifications

Acoustic Principle: Pressure gradient
Active Electronics: JFET impedance converter with bipolar output buffer
Capsule: 1.00"
Polar Pattern: Cardioid
Address Type: Side
Frequency Range: 20Hz - 20kHz
Output Impedance: 100O
Maximum SPL: 142 dB SPL
Equivalent Noise (A-Weighted): 4dBA
Sensitivity: -32 dB re 1 Volt/Pascal (25 mV @ 94 dB SPL) +/- 2 dB @ 1 kHz
Analogue Power Requirements: P48
Analogue Output Connection: 3-pin XLR

Mechanical

Weight (grams): 313

Dimensions (millimetres)
Length: 52
Width: 52
Height: 189

What's in the Box
1x NT1 Signature Series
1x SM6
1x XLR Cable

Notes: A workhorse studio condenser microphone with a warm, silky character, exceptionally low noise and high SPL handling - ideal in a wide range of studio applications.

The World's Most Popular Studio Microphone

Since it launched over 30 years ago, the NT1 has become the world's most popular studio microphone and the go-to for countless creators across the globe - from bedroom musicians and studio professionals to streamers, podcasters and voice over artists. The NT1 Signature Series carries on this legacy, delivering classic studio sound for today's creators.

Iconic Signature Sound

Featuring our stunning HF6 1-inch true condenser capsule, the NT1 Signature Series boasts the same iconic sound signature that its forebears are revered for. Sparkling top end, highly detailed midrange, and rich, warm bass make it shine in almost any recording application you can imagine - from vocals, piano and acoustic guitar to drums, percussion and electric guitar.

Your Mic, Your Way

For the first time in the NT1's 30-year history, this iconic microphone is available in a range of iconic colours. This limited-edition collection features five vibrant colourways alongside the timeless black finish, including red, green, purple, pink and blue.

A True Workhorse

A true workhorse that excels in a wide range of studio applications. With an exceptionally low noise floor and incredibly high max SPL, it captures everything from whispers to drums with the utmost clarity. The perfect all-rounder studio microphone.

Legendary RODE Quality

The NT1 Signature Series is designed and made using the highest-grade components in RODE's precision manufacturing facilities in Sydney, Australia. It's built to last, with a rugged body machined from high-grade aluminium and comes with our industry-leading 10-year warranty, so you can rest assured it will remain your go-to for the long haul.

Premium Accessory Kit

Keep your recordings pristine with the studio-grade shock mount and pop filter included with the NT1 Signature Series, the perfect tools for minimising audio artifacts caused by knocks, rumbles and plosives. It also ships with a premium XLR cable so you can start creating right away - just plug straight into your audio interface or mixer and start recording exceptional audio.

Key Features

Large-diaphragm cardioid condenser microphone
HF6 1-inch true condenser capsule, precision engineered to sub-micron tolerances
Tight cardioid polar pattern for excellent background noise rejection
Classic NT1 sound signature - rich, warm bass, detailed midrange and sparkling highs for exceptional performance in a wide range of studio applications
Smooth frequency response and high sensitivity for incredible balance and clarity
Extremely low noise (4dBA) - the world's quietest studio condenser microphone
High SPL handling capabilities (142dB) for capturing very loud sound sources
Studio-grade shock mount and pop filter and premium XLR cable included
Available in classic black or a range of limited-edition colours, including red, green, purple, pink and blue
Rugged aluminium body with a high-grade finish - incredibly resistant to scuffs and scratches
Industry-leading 10-year warranty
Designed and made in RODE's precision manufacturing facilities in Sydney, Australia

Acoustic & Electrical Specifications

Acoustic Principle: Pressure gradient
Active Electronics: JFET impedance converter with bipolar output buffer
Capsule: 1.00"
Polar Pattern: Cardioid
Address Type: Side
Frequency Range: 20Hz - 20kHz
Output Impedance: 100O
Maximum SPL: 142 dB SPL
Equivalent Noise (A-Weighted): 4dBA
Sensitivity: -32 dB re 1 Volt/Pascal (25 mV @ 94 dB SPL) +/- 2 dB @ 1 kHz
Analogue Power Requirements: P48
Analogue Output Connection: 3-pin XLR

Mechanical

Weight (grams): 313

Dimensions (millimetres)
Length: 52
Width: 52
Height: 189

What's in the Box
1x NT1 Signature Series
1x SM6
1x XLR Cable

Notes: A workhorse studio condenser microphone with a warm, silky character, exceptionally low noise and high SPL handling - ideal in a wide range of studio applications.

The World's Most Popular Studio Microphone

Since it launched over 30 years ago, the NT1 has become the world's most popular studio microphone and the go-to for countless creators across the globe - from bedroom musicians and studio professionals to streamers, podcasters and voice over artists. The NT1 Signature Series carries on this legacy, delivering classic studio sound for today's creators.

Iconic Signature Sound

Featuring our stunning HF6 1-inch true condenser capsule, the NT1 Signature Series boasts the same iconic sound signature that its forebears are revered for. Sparkling top end, highly detailed midrange, and rich, warm bass make it shine in almost any recording application you can imagine - from vocals, piano and acoustic guitar to drums, percussion and electric guitar.

Your Mic, Your Way

For the first time in the NT1's 30-year history, this iconic microphone is available in a range of iconic colours. This limited-edition collection features five vibrant colourways alongside the timeless black finish, including red, green, purple, pink and blue.

A True Workhorse

A true workhorse that excels in a wide range of studio applications. With an exceptionally low noise floor and incredibly high max SPL, it captures everything from whispers to drums with the utmost clarity. The perfect all-rounder studio microphone.

Legendary RODE Quality

The NT1 Signature Series is designed and made using the highest-grade components in RODE's precision manufacturing facilities in Sydney, Australia. It's built to last, with a rugged body machined from high-grade aluminium and comes with our industry-leading 10-year warranty, so you can rest assured it will remain your go-to for the long haul.

Premium Accessory Kit

Keep your recordings pristine with the studio-grade shock mount and pop filter included with the NT1 Signature Series, the perfect tools for minimising audio artifacts caused by knocks, rumbles and plosives. It also ships with a premium XLR cable so you can start creating right away - just plug straight into your audio interface or mixer and start recording exceptional audio.

Key Features

Large-diaphragm cardioid condenser microphone
HF6 1-inch true condenser capsule, precision engineered to sub-micron tolerances
Tight cardioid polar pattern for excellent background noise rejection
Classic NT1 sound signature - rich, warm bass, detailed midrange and sparkling highs for exceptional performance in a wide range of studio applications
Smooth frequency response and high sensitivity for incredible balance and clarity
Extremely low noise (4dBA) - the world's quietest studio condenser microphone
High SPL handling capabilities (142dB) for capturing very loud sound sources
Studio-grade shock mount and pop filter and premium XLR cable included
Available in classic black or a range of limited-edition colours, including red, green, purple, pink and blue
Rugged aluminium body with a high-grade finish - incredibly resistant to scuffs and scratches
Industry-leading 10-year warranty
Designed and made in RODE's precision manufacturing facilities in Sydney, Australia

Acoustic & Electrical Specifications

Acoustic Principle: Pressure gradient
Active Electronics: JFET impedance converter with bipolar output buffer
Capsule: 1.00"
Polar Pattern: Cardioid
Address Type: Side
Frequency Range: 20Hz - 20kHz
Output Impedance: 100O
Maximum SPL: 142 dB SPL
Equivalent Noise (A-Weighted): 4dBA
Sensitivity: -32 dB re 1 Volt/Pascal (25 mV @ 94 dB SPL) +/- 2 dB @ 1 kHz
Analogue Power Requirements: P48
Analogue Output Connection: 3-pin XLR

Mechanical

Weight (grams): 313

Dimensions (millimetres)
Length: 52
Width: 52
Height: 189

What's in the Box
1x NT1 Signature Series
1x SM6
1x XLR Cable

Notes: A workhorse studio condenser microphone with a warm, silky character, exceptionally low noise and high SPL handling - ideal in a wide range of studio applications.

The World's Most Popular Studio Microphone

Since it launched over 30 years ago, the NT1 has become the world's most popular studio microphone and the go-to for countless creators across the globe - from bedroom musicians and studio professionals to streamers, podcasters and voice over artists. The NT1 Signature Series carries on this legacy, delivering classic studio sound for today's creators.

Iconic Signature Sound

Featuring our stunning HF6 1-inch true condenser capsule, the NT1 Signature Series boasts the same iconic sound signature that its forebears are revered for. Sparkling top end, highly detailed midrange, and rich, warm bass make it shine in almost any recording application you can imagine - from vocals, piano and acoustic guitar to drums, percussion and electric guitar.

Your Mic, Your Way

For the first time in the NT1's 30-year history, this iconic microphone is available in a range of iconic colours. This limited-edition collection features five vibrant colourways alongside the timeless black finish, including red, green, purple, pink and blue.

A True Workhorse

A true workhorse that excels in a wide range of studio applications. With an exceptionally low noise floor and incredibly high max SPL, it captures everything from whispers to drums with the utmost clarity. The perfect all-rounder studio microphone.

Legendary RODE Quality

The NT1 Signature Series is designed and made using the highest-grade components in RODE's precision manufacturing facilities in Sydney, Australia. It's built to last, with a rugged body machined from high-grade aluminium and comes with our industry-leading 10-year warranty, so you can rest assured it will remain your go-to for the long haul.

Premium Accessory Kit

Keep your recordings pristine with the studio-grade shock mount and pop filter included with the NT1 Signature Series, the perfect tools for minimising audio artifacts caused by knocks, rumbles and plosives. It also ships with a premium XLR cable so you can start creating right away - just plug straight into your audio interface or mixer and start recording exceptional audio.

Key Features

Large-diaphragm cardioid condenser microphone
HF6 1-inch true condenser capsule, precision engineered to sub-micron tolerances
Tight cardioid polar pattern for excellent background noise rejection
Classic NT1 sound signature - rich, warm bass, detailed midrange and sparkling highs for exceptional performance in a wide range of studio applications
Smooth frequency response and high sensitivity for incredible balance and clarity
Extremely low noise (4dBA) - the world's quietest studio condenser microphone
High SPL handling capabilities (142dB) for capturing very loud sound sources
Studio-grade shock mount and pop filter and premium XLR cable included
Available in classic black or a range of limited-edition colours, including red, green, purple, pink and blue
Rugged aluminium body with a high-grade finish - incredibly resistant to scuffs and scratches
Industry-leading 10-year warranty
Designed and made in RODE's precision manufacturing facilities in Sydney, Australia

Acoustic & Electrical Specifications

Acoustic Principle: Pressure gradient
Active Electronics: JFET impedance converter with bipolar output buffer
Capsule: 1.00"
Polar Pattern: Cardioid
Address Type: Side
Frequency Range: 20Hz - 20kHz
Output Impedance: 100O
Maximum SPL: 142 dB SPL
Equivalent Noise (A-Weighted): 4dBA
Sensitivity: -32 dB re 1 Volt/Pascal (25 mV @ 94 dB SPL) +/- 2 dB @ 1 kHz
Analogue Power Requirements: P48
Analogue Output Connection: 3-pin XLR

Mechanical

Weight (grams): 313

Dimensions (millimetres)
Length: 52
Width: 52
Height: 189

What's in the Box
1x NT1 Signature Series
1x SM6
1x XLR Cable

Notes: Turn your smartphone into a professional filmmaking rig with the RODE Phone Cage. This magnetic mobile filmmaking cage features an ultra-secure mounting system for attaching a MagSafer iPhoner or other smartphone with a magnetic case. Five cold shoe mounts allow for easy mounting of a wide range of accessories, including microphones and lights, with in-built cable management ensuring your rig stays neat and tidy. Conveniently placed 14-inch and 3/8-inch threads facilitate connecting even more accessories, including handles and tripods, allowing you to customise it to your needs. The Phone Cage is made from lightweight aluminium and is incredibly rugged, perfect for outdoor use and run-and-gun filmmaking.

Magnetic mobile filmmaking cage
MagSafer compatible
In-built cable management slots
Five cold shoe mounts for attaching microphones and lights
14-inch and 3/8-inch threads for use with tripods, handles and other accessories
Facilitates portrait and landscape shooting

Mechanical specifications

Mounting Options:
Cold Shoe Mounts: 5
Standard 1/4-inch Thread: 14
ARRI 1/4-inch Thread: 17
3/8-inch Threads: 2

Weight (grams): 285
Dimensions (millimetres):
Length: 245
Width: 35.5
Height: 126

What's in the box

1 x Phone Cage
1 x Magnetic Phone Mount
1 x Locking Screw

Notes: The SC27 is a high-quality SuperSpeed USB-C to USB-C cable designed to connect devices that require fast data transfer speeds to your computer. It measures 2 metres in length and is capable of 5Gbps transfer speeds and 60W power delivery, making it ideal for use with high-performance devices. Available in a range of colours, including black, orange, red, purple, pink, green and blue.

High-quality SuperSpeed cable with up to 5Gbps data transfer and 60W charging
2m (6'6") long
Output Connection: USB-C
Input Connection: USB-C

Weight (grams): 28.7g
Dimensions (millimetres): Length: 2000mm

Notes: The VESA Mount is a sturdy adjustable mount for products fitted with VESA mounting screws, such as the RODECaster Pro II and RODECaster Duo. It features a locking ball head that can rotate 360 degrees for easy manoeuvring of the device in any orientation.

The mount attaches to any standard microphone stand or studio arm, and is the perfect way to position your device in a range of scenarios.

Note - not compatible with the original RODECaster Pro.

Suits both 100 and 75mm VESA mounts
360-degree ball head mount
Easy-to-use cam to lock in any position
Attaches to any standard microphone stand or sudio arm

Mechanical specifications

Weight (grams): 400g (including screws)
Dimensions (millimetres):
Length: 140
Width: 140
Height: 90
Compatible RODE Products: RODECaster Pro II, RODECaster Duo

Notes: 3-inch records were originally released and marketed for a short time in Japan in the early 2000s, just before the worldwide re-birth of vinyl began to take hold. Fast forward 14 years, the idea of resurrecting the format stemmed from a trip to Japan when representatives of Record Store Day met the only factory that used to make these "8ban" records. After a year of ideation, prototyping, tweaking and collaboration with the Record Store Day team, the RSD3 Mini Turntable by Crosley was born. Don't be fooled by its small stature! This mini belt-drive turntable has a lot of the same features as its big brother: AT3600 moving-magnet cartridge, adjustable pitch control, fully supported platter and aux out port with RCA adapter. The RSD3 has a built-in speaker that gets the job done, but use the aux-out and included RCA cable adapter to hook this mini turntable into larger speakers and you're in for a surprise. Record Store Day and Crosley are here to remind you that it's true what they say: size doesn't platter!

Powered via 4AA batteries (not included) or USB power connection.

Includes clear dust cover, aux cable, AUX to RCA Adaptor, and USB to Mini USB charging cord.

Unit (L x W x H) inches = 4.75 x 6.125 x 2.875
Unit Weight (Lbs) = 1

Notes: ***B-STOCK: Box opened, product in perfect working order***


Intended as an all-rounder for all production purposes, the HD 490 Pro are built for comfort as well as top-notch sound quality thanks to their open-back design. DearVR MIX-SE software allows you to mix, monitor and master with accuracy.

Supplier's Notes:
The perfect mix of clarity, comfort, and reliability, HD 490 PRO studio headphones are built to handle all the complexities of today's music production. The open-back design delivers an extremely wide, dimensional sound stage and ultra-precise sound reproduction, eliminating audio blind spots and ensuring you're in full control of every detail.

Handcrafted and German-engineered with built-to-last components and a lightweight, comfortable design, HD 490 PRO lets you feel the music and forget about the headphones. Meticulously engineered ergonomics eliminate pressure points while the open-back design provides natural ventilation, making hours in the music feel like minutes. Two sets of switchable ear pads, each with a unique sound signature for long hours of mixing and producing, eliminate ear fatigue and are designed with sustainability and durability in mind - they're both washable and replaceable. HD 490 PRO mixing headphones also include the innovative DearVR MIX-SE plugin from Dear Reality, placing you in the "sweet spot" and turning your DAW into an ultimate virtual mixing environment. DearVR MIX-SE simulates the carefully designed acoustics of mixing studios, helping you ensure a balanced, consistent translation of your mix on different systems. HD 490 PRO helps you achieve your full creative vision, eliminating audio blind spots, putting you in full control of every detail, and ensuring accurate playback beyond the studio.

Features

Backed by decades of Sennheiser engineering, technology, research and development
Open-back design with an extremely wide, dimensional sound stage and ultra-precise localization
Uncolored frequency response for honest, dynamic sound reproduction across the full spectrum
Innovative low-frequency cylinder system for full, accurate, and clearly defined low end
Precision-engineered ergonomics eliminate pressure points and deliver supreme, flexible, lightweight comfort
Sennheiser Open-frame Architecture reduces total harmonic distortion (THD) and minimizes resonance,improving audio accuracy
Includes Dear Reality dearVR MIX-SE plugin, turning your DAW into an ultimate virtual mixing environment via advanced spatial audio technology
Two unique sets of ear pads for producing or mixing help eliminate ear fatigue and pinpoint frequencies


Sustainability-inspired with washable, replaceable pads and FSC-certified, forest-friendly packaging
Geometrically angled earcup design optimizes transducer placement for a consistent listening experience
State-of-the-art neodymium magnets for superior driver performance and efficiency
Patented cable coil structure blocks cable-borne noise, ensuring the clearest signal
Ultralight voice coil for remarkably authentic and dynamic audio reproduction
Right and left ear jacks with detachable cable easily adapts to any studio configuration
Patented accessibility features: braille-guided L/R earcups and grooved ear pads for eyeglasses
Open-mesh metal earpiece covers provide natural ventilation
Durable design meticulously engineered in Germany and hand-assembled in Romania

Specs

Weight (g): 260 gr. (w/o cable)
Max. Sound Pressure Level: l128 dBSPL (1 kHz @ 5% THD)
Sensitivity: 105 dBSPL (1 kHz/ 1 Vrms), 96 dBSPL (1 kHz/ 1 mW)
Transducer principle: Dynamic, open
Wearing Style: Circumaural

Total harmonic distortion: <0.2% (1kHz, 100dB SPL)
Connector: 3.5mm/6.3mm

Ambient Conditions

Operating Relative Humidity: 10 to 80%, not condensing
Operating Temperature: +0-CC

Electrical Properties:

Sensitivity: 105dBSPL (1kHz/1Vrms), 96 dBSPL (1kHz/1mW)
Impedance: 130 ohms (1kHz)

Dimensions

Weight (g): 260g (w/o cable)
Cable length: 1.8m

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Intended as an all-rounder for all production purposes, the HD 490 Pro are built for comfort as well as top-notch sound quality thanks to their open-back design. DearVR MIX-SE software allows you to mix, monitor and master with accuracy.

Supplier's Notes:
The perfect mix of clarity, comfort, and reliability, HD 490 PRO studio headphones are built to handle all the complexities of today's music production. The open-back design delivers an extremely wide, dimensional sound stage and ultra-precise sound reproduction, eliminating audio blind spots and ensuring you're in full control of every detail.

Handcrafted and German-engineered with built-to-last components and a lightweight, comfortable design, HD 490 PRO lets you feel the music and forget about the headphones. Meticulously engineered ergonomics eliminate pressure points while the open-back design provides natural ventilation, making hours in the music feel like minutes. Two sets of switchable ear pads, each with a unique sound signature for long hours of mixing and producing, eliminate ear fatigue and are designed with sustainability and durability in mind - they're both washable and replaceable. HD 490 PRO mixing headphones also include the innovative DearVR MIX-SE plugin from Dear Reality, placing you in the "sweet spot" and turning your DAW into an ultimate virtual mixing environment. DearVR MIX-SE simulates the carefully designed acoustics of mixing studios, helping you ensure a balanced, consistent translation of your mix on different systems. HD 490 PRO helps you achieve your full creative vision, eliminating audio blind spots, putting you in full control of every detail, and ensuring accurate playback beyond the studio.

Features

Backed by decades of Sennheiser engineering, technology, research and development
Open-back design with an extremely wide, dimensional sound stage and ultra-precise localization
Uncolored frequency response for honest, dynamic sound reproduction across the full spectrum
Innovative low-frequency cylinder system for full, accurate, and clearly defined low end
Precision-engineered ergonomics eliminate pressure points and deliver supreme, flexible, lightweight comfort
Sennheiser Open-frame Architecture reduces total harmonic distortion (THD) and minimizes resonance,improving audio accuracy
Includes Dear Reality dearVR MIX-SE plugin, turning your DAW into an ultimate virtual mixing environment via advanced spatial audio technology
Two unique sets of ear pads for producing or mixing help eliminate ear fatigue and pinpoint frequencies


Sustainability-inspired with washable, replaceable pads and FSC-certified, forest-friendly packaging
Geometrically angled earcup design optimizes transducer placement for a consistent listening experience
State-of-the-art neodymium magnets for superior driver performance and efficiency
Patented cable coil structure blocks cable-borne noise, ensuring the clearest signal
Ultralight voice coil for remarkably authentic and dynamic audio reproduction
Right and left ear jacks with detachable cable easily adapts to any studio configuration
Patented accessibility features: braille-guided L/R earcups and grooved ear pads for eyeglasses
Open-mesh metal earpiece covers provide natural ventilation
Durable design meticulously engineered in Germany and hand-assembled in Romania

Specs

Weight (g): 260 gr. (w/o cable)
Max. Sound Pressure Level: l128 dBSPL (1 kHz @ 5% THD)
Sensitivity: 105 dBSPL (1 kHz/ 1 Vrms), 96 dBSPL (1 kHz/ 1 mW)
Transducer principle: Dynamic, open
Wearing Style: Circumaural

Total harmonic distortion: <0.2% (1kHz, 100dB SPL)
Connector: 3.5mm/6.3mm

Ambient Conditions

Operating Relative Humidity: 10 to 80%, not condensing
Operating Temperature: +0-CC

Electrical Properties:

Sensitivity: 105dBSPL (1kHz/1Vrms), 96 dBSPL (1kHz/1mW)
Impedance: 130 ohms (1kHz)

Dimensions

Weight (g): 260g (w/o cable)
Cable length: 1.8m

Notes: In "Sacred Geo V - "The Source", we arrive at the final stage of the journey into Sacred Geometry.

This volume pays tribute to the creative spirit, highlighting DJs as modern-day alchemists who craft auditory experiences that resonate with the heart and soul. It invites us to explore the sacred intersection of life, art, and music.

The design, represented by the overlapping circles of the "Vesica Piscis", delves deep into the spiritual and artistic realms of music creation. One circle signifies the initial spark of inspiration, the genesis of a musical idea, while the other focuses on the execution - the transformation of this inspiration into tangible soundscapes.

The vinyl is made from a special compound with a translucent white base, reminiscent of a blank canvas. It is a standard Serato weight 12" disc that meets the highest standards of performance and demands, shielded by a precision laser-cut sleeve made from deluxe matte black stock.

The latest Serato Control Vinyl 2.5 offers an enhanced experience with the re-mastered Serato NoiseMap™ Control Tone. 6db louder than previous versions, it ensures precise tracking, improved vinyl durability, and the most authentic digital vinyl feel available on the market.

Notes: Plastic dust cover for Soma Laboratory Terra.

*** The Terra is not included, it is shown in the pictures for demonstration purposes only. ***

Notes: TERRA is a new SOMA Labs synth.

TERRA is a highly conceptual device. The core idea is unity of nature and technology, and a perfect balance between simplicity and versatility. Behind the extremely simple interface hides a complex polyphonic, microtonal synthesizer with a broad and flexible sound palette that ranges from classical beautiful tones to complex atonal noise, and offers smooth and fast transitions between these extremes.

The innovative keyboard design invites new playing techniques and covers the full range of a grand piano with the possibility to tune each note with an accuracy of 125 steps per semitone. To achieve this range with such a simple keyboard we designed a unique system of pitch shifting using four additional sensors. Pressing different combinations of them will result in 16 variations of keyboard transposing, including up to 3 octaves up and down, fifth, fourth, third, tone etc.

Not only do you get the full range of a grand piano in a very compact design, TERRA also offers an entirely new and different approach to playing melodies and chords.

The keyboard consists of 12-note sensors with velocity and pressure sensitivity allowing for the manual creation of slow attack and vibrato, 4 dynamic sensors for timbre modification and control, 4 pitch-shifting sensors and 2 hold sensors for holding the state of the timbre and note sensors.

Inside TERRA there is a three-axis motion sensor for creating a variety of different modulations by simple intuitive movements of your hands and body.

TERRA is digital and contains 32 complex synthesis algorithms. Each algorithm has been carefully designed to be a complete and flexible musical instrument on its own, ready for learning and playing in its own unique way. The goal is to free the musician from long exhausting programming, setting hundreds of parameters for creating one timbre, and instead putting the focus directly on music and performance and following your imagination and inspiration.

TERRA offers the best of both worlds: the direct intuitive tactile connection from acoustic instruments and the flexibility and versatility of synthesizers. TERRA inherits design principles from LYRA-8 and also contains application of the new principles that were announced for ReFLEX, exploring the future of synthesis.

TERRA has an extremely simple interface that gives you instant access to all its functions in several touches, including saving and loading the 96 presets that are stored directly on the playing sensors. TERRA has no display. Instead it shows and lets you dial all necessary data on the 6 LED-sensor triangle in the centre.

TERRA has a built-in FX processor so the stereo output is ready to use, making it a perfect stand-alone performance instrument. While the sound generation is digital, TERRA has a unique custom-built and top quality analogue part that makes it sound rich, natural, clear and powerful at the same time.

The housing of TERRA comes from a solid piece of wood, making each instrument unique and slightly different. In the photo above and in the announcement demo video you can see the prototype of the synth. The final design is in development and we intend to make several different versions.

TERRA is a sanctuary for a natural soul right in the middle of the rumbling plastic world, a ground where you can breathe in and out slowly, and hold on to your roots.

TERRA is our dream about a bright future where we will be both technologically advanced and more connected to nature, where machines and technology are not a prison for our feelings and spirit but their extension.

Synthesis algorithms: 32
Polyphony: 1-12 voices (depending on the algorithm)
Presets: 96
Pitch Shifter presets: 24
Line out: L, R TS/TRS 1/4-inch jacks / 6.35 mm jacks
Maximum line output signal: 13 V peak-to-peak
Nominal line output signal: ~1.5 V (volume 100%)
Headphone output: TRS 1/4 inch jack / 6.35 mm jacks
Headphones impedance: 6-64 ohm
CV-clock input voltage: 3-15 V
Power supply voltage: DC 12 V *
Consumption current: 0.2 A
DC jack: 5.5 x 2.1 mm, "+" in center
Dimensions: 405 x 365 x 57 mm
Weight: 2.2 kg
* TERRA comes with a high quality power supply . If it gets lost, use a high-quality modern switched-mode power supply with 12 V output voltage, at least 0.4 A maximum current, 5.5 x 2.1 mm DC jack, center "+".

What's included:

TERRA - 1 pc.
Power supply - 1 pc.
CV clock adapter (DIN5 - 3.5 mm mini-jack) - 1pc.
Short interface reference manual - 1 pc.
On-table mounting pads - 4 pcs.

Notes: The kind of instrument Soma Labs do so well: weird but wonderful. Based around 32 complex digital synth algorithms and 12 note velocity- and pressure-sensitive sensors, transposition techniques allow you to play the full range of a grand piano.

Supplier's Notes:
TERRA is a new SOMA Labs synth.

TERRA is a highly conceptual device. The core idea is unity of nature and technology, and a perfect balance between simplicity and versatility. Behind the extremely simple interface hides a complex polyphonic, microtonal synthesizer with a broad and flexible sound palette that ranges from classical beautiful tones to complex atonal noise, and offers smooth and fast transitions between these extremes.

The innovative keyboard design invites new playing techniques and covers the full range of a grand piano with the possibility to tune each note with an accuracy of 125 steps per semitone. To achieve this range with such a simple keyboard we designed a unique system of pitch shifting using four additional sensors. Pressing different combinations of them will result in 16 variations of keyboard transposing, including up to 3 octaves up and down, fifth, fourth, third, tone etc.

Not only do you get the full range of a grand piano in a very compact design, TERRA also offers an entirely new and different approach to playing melodies and chords.

The keyboard consists of 12-note sensors with velocity and pressure sensitivity allowing for the manual creation of slow attack and vibrato, 4 dynamic sensors for timbre modification and control, 4 pitch-shifting sensors and 2 hold sensors for holding the state of the timbre and note sensors.

Inside TERRA there is a three-axis motion sensor for creating a variety of different modulations by simple intuitive movements of your hands and body.

TERRA is digital and contains 32 complex synthesis algorithms. Each algorithm has been carefully designed to be a complete and flexible musical instrument on its own, ready for learning and playing in its own unique way. The goal is to free the musician from long exhausting programming, setting hundreds of parameters for creating one timbre, and instead putting the focus directly on music and performance and following your imagination and inspiration.

TERRA offers the best of both worlds: the direct intuitive tactile connection from acoustic instruments and the flexibility and versatility of synthesizers. TERRA inherits design principles from LYRA-8 and also contains application of the new principles that were announced for ReFLEX, exploring the future of synthesis.

TERRA has an extremely simple interface that gives you instant access to all its functions in several touches, including saving and loading the 96 presets that are stored directly on the playing sensors. TERRA has no display. Instead it shows and lets you dial all necessary data on the 6 LED-sensor triangle in the centre.

TERRA has a built-in FX processor so the stereo output is ready to use, making it a perfect stand-alone performance instrument. While the sound generation is digital, TERRA has a unique custom-built and top quality analogue part that makes it sound rich, natural, clear and powerful at the same time.

The housing of TERRA comes from a solid piece of wood, making each instrument unique and slightly different. In the photo above and in the announcement demo video you can see the prototype of the synth. The final design is in development and we intend to make several different versions.

TERRA is a sanctuary for a natural soul right in the middle of the rumbling plastic world, a ground where you can breathe in and out slowly, and hold on to your roots.

TERRA is our dream about a bright future where we will be both technologically advanced and more connected to nature, where machines and technology are not a prison for our feelings and spirit but their extension.

Synthesis algorithms: 32
Polyphony: 1-12 voices (depending on the algorithm)
Presets: 96
Pitch Shifter presets: 24
Line out: L, R TS/TRS 1/4-inch jacks / 6.35 mm jacks
Maximum line output signal: 13 V peak-to-peak
Nominal line output signal: ~1.5 V (volume 100%)
Headphone output: TRS 1/4 inch jack / 6.35 mm jacks
Headphones impedance: 6-64 ohm
CV-clock input voltage: 3-15 V
Power supply voltage: DC 12 V *
Consumption current: 0.2 A
DC jack: 5.5 x 2.1 mm, "+" in center
Dimensions: 405 x 365 x 57 mm
Weight: 2.2 kg
* TERRA comes with a high quality power supply . If it gets lost, use a high-quality modern switched-mode power supply with 12 V output voltage, at least 0.4 A maximum current, 5.5 x 2.1 mm DC jack, center "+".

What's included:

TERRA - 1 pc.
Power supply - 1 pc.
CV clock adapter (DIN5 - 3.5 mm mini-jack) - 1pc.
Short interface reference manual - 1 pc.
On-table mounting pads - 4 pcs.

Notes: Soft case for Soma Laboratory Terra.

Notes: A Digital DJ looking for a professional, durable case solution for your Pioneer DDJ-REV5 controller? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Pioneer DDJ-REV5 controller, this case is perfect for the travelling DJ that needs to protect their equipment.

Specifications

Colour: Black
Weight: 2,26 kg / 4.972 lbs
Outer Dimensions (W x H x D): 77.2 x 46.7 x 13.0 cm | 30.4 x 18.4 x 5.1 inch
Inner Dimensions (W x H x D): 76.2 x 44.1 x 11.0 cm | 30.0 x 17.4 x 4.3 inch
Material: Durashock moulded EVA foam

Protection:

Black soft fleece interior
Protective egg-crate foam prevent damage from vibrations & shocks
Extra's Extra space for cables or power adapter
Convenient carry handle and shoulder strap
Easy grip zipper pulls

Fits:

Pioneer DDJ-REV5 Controller + power adapter, extra cables

Notes: A Digital DJ looking for a professional, durable case solution for your Pioneer PLX-CRSS12 turntable? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Pioneer PLX-CRSS12 turntable, this case is perfect for the travelling DJ that needs to protect their equipment.

Specifications

Colour: Black
Weight: 2,35 kg / 5.17 lbs
Outer Dimensions (W x H x D): 52.5 x 43.5 x 21.0 cm | 20.7 x 17.1 x 8.3 inch
Inner Dimensions (W x H x D): 45.8 x 35.8 x 17.0 cm | 18.0 x 14.1 x 6.7 inch
Material: Durashock moulded EVA foam

Protection:

Water repellent laminated nylon exterior
Removable top-bottom egg crate foam prevent damage from vibrations and shocks
Black soft fleece interior

Extras

Convenient carry handles and shoulder strap
Easy grip zipper pulls

Fits

Pioneer PLX-CRSS12 turntable

Notes: Want to take more of your gear with you when travelling? UDG presents the UDG Creator Wheeled MIDI Controller Case Black 22" to bring you the perfect solution for flying and travelling with MIDI controller, laptop and any additional hardware.

UDG Creator Wheeled MIDI Controller Case Black 22" means more equipment with no compromise on convenience and protection. Featuring protective padded compartments and padded secure strap. It's the only trolley gear bag available that is large enough to house controllers such as the Pioneer DDJ-FLX4/ REV1/ 200/ 400/ SB3 or NI Traktor S3/ S2 MK3/ S4 MK3. Made of tough, durable black exterior & interior material, sturdy in-line wheels for easy transport and mobility with paddings in all the right places for the ultimate carrier of your valuable equipment.

Specifications
Colour: Black
Weight: 3,90 kg / 8.58 lbs
Outer Dimensions (W x H x D): 67.6 x 43.0 x 25.0 cm | 26.6 x 16.9 x 9.8 inch
Inner Dimensions (W x H x D): 56.0 x 36.0 x 10.5 cm | 22.0 x 14.2 x 4.1 inch
Material: Water resistant Ballistic Nylon 1680D

Protection:

Padded compartment for controller or mixer with padded secure strap
Padded compartment for up to 17" laptop
Padded pocket for up to 9.7" tablet and small accessories
Smooth rolling in-line wheels with high quality in-line skate bearings

Extras

Includes removable paddings to fit various controllers
Rear-access pocket for magazine/document
Retractable handle with 2 stage internal trolley system
Additional cable pouch
Soft padded carry handle

Fits:

Pioneer DDJ-FLX4, DDJ-REV1, DDJ-200, DDJ-400, DDJ-SB3, DDJ-RB, DDJ-SB2, DDJ-SR2, DDJ-RR, DJS-1000,
CDJ-3000, DJM-900NXS2,
NI Traktor S3, S2 MK3, S4 MK3, S5, S4 MK2, S2 MK2, Komplete Kontrol A25, Maschine Studio,
Denon DJ Prime Go, MC3000, MC4000, MC6000 MK2,
Reloop Elite, Beatmix 2 MK2, Beatpad MK2, Terminal Mix 4/ 8,
Akai MPC Live II, APC 40, MPK 25,
Novation AFX, Peak, Nocturn 25, Remote SL MK II, Zero SL MK II,
Numark Mixtrack Platinum FX, Mixtrack Pro FX, Mixtrack, Mixtrack II/ III, Mixdeck Express, Mixtrack Platinum, Mixtrack Pro/ II/ III, NV II,
American Audio Encore 2000, VMS4, VMS5,
Roland TR-808, TR-909, DJ-707M, TR-8, TR-8S, DJ-202, System-1,
Rane Twelve, Seventy-Two, Seventy,
Gemini G2V, G4V, GMX,
M-Audio Exponent,
Hercules DJControl Inpulse 500 DJControl Jogvision, DJControl Inpulse 300,
Korg Minilogue XD,
up to 17" laptop, up to 9.7" tablet, audio interface, books and magazines

Notes: The ultimate companion for producers on the move - the UDG Ultimate Producer Backpack Trolley. This sleek and versatile backpack is designed to meet the demands of modern music producers and DJs, combining style, functionality, and durability in one package.

The Producer Backpack Trolley is more than just a bag; it's a travel companion designed to make your life easier while maintaining a sleek, professional look. Whether you're a DJ, music producer, or someone who needs a reliable, feature-packed backpack for travel, this is the perfect choice. Elevate your gear transportation experience with the ultimate in style and functionality. Get yours today!

Specifications

Colour: Black, Orange inside
Weight: 4,25 kg / 9.35 lbs
Outer Dimensions (W x H x D): 39.5 x 62.0 x 32.0 cm | 15.5 x 24.4 x 12.6 inch
Inner Dimensions (W x H x D): 35.0 x 45.5 x 15.5 cm | 13.8 x 17.9 x 6.1 inch
Material: Water Resistant Nylon 420D

Protection

Padded MIDI controller compartment
Inseparable wheel cover
Comfortable moisture absorbent shoulder straps
Ergonomic back padding provide exceptional comfort
Integrated with a TSA combination lock
Easy backpack to trolley mechanism

Extras

Multiple external pockets for accessories & smaller gear
Quick access top pocket
Top & side carry handles
Retractable handle with 2-stage trolley system
Smooth rolling in-line wheels with high quality in-line skate bearings

Fits

Main compartment fits up to 18.4" laptop.
Pioneer CDJ-3000, Ecler Warm4, Reloop RMX-95, Roland SPD-SX Pro, Ableton Push 3

Notes: Connect your USB compatible gear with Audio Optimized UDG Ultimate Cables.

This USB 3.0 cable with a streamlined design helps DJ's and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official.

For devices with an older USB version, this cable is backward compatible so you can still make the connection.

Specifications

Colour: Black
Length: 1.5 m | 4.92 ft
Weight: 0,10 kg / 0.22 lbs
Material: PVC + Metal

Protection:

Constructed with corrosion-resistant, gold-plated connectors for optimal signal
Two ferrite chokes: help eliminate noise in both directions
Includes UDG Velcro strap for easy storage
High-quality multi-shielded PVC USB cable

Extras

High-speed Audio Optimized USB 3.0 C-Male to A-Male cable
Maximum data transfer rates up to 5 Gbps
Ergonomic UDG Design
Various colours makes them easy to identify

Fits

Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Notes: Connect your USB compatible gear with Audio Optimized UDG Ultimate Cables.

This USB 3.0 cable with a streamlined design helps DJ's and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official.

For devices with an older USB version, this cable is backward compatible so you can still make the connection.

Specifications

Colour: Blue

Length: 1.5 m | 4.92 ft
Weight: 0,10 kg / 0.22 lbs
Material: PVC + Metal

Protection:

Constructed with corrosion-resistant, gold-plated connectors for optimal signal
Two ferrite chokes: help eliminate noise in both directions
Includes UDG Velcro strap for easy storage
High-quality multi-shielded PVC USB cable

Extras

High-speed Audio Optimized USB 3.0 C-Male to A-Male cable
Maximum data transfer rates up to 5 Gbps
Ergonomic UDG Design
Various colours makes them easy to identify

Fits

Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Notes: Connect your USB compatible gear with Audio Optimized UDG Ultimate Cables.

This USB 3.0 cable with a streamlined design helps DJ's and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official.

For devices with an older USB version, this cable is backward compatible so you can still make the connection.

Specifications

Colour: Green
Length1.5 m | 4.92 ft
Weight: 0,10 kg / 0.22 lbs
Material: PVC + Metal

Protection:

Constructed with corrosion-resistant, gold-plated connectors for optimal signal
Two ferrite chokes: help eliminate noise in both directions
Includes UDG Velcro strap for easy storage
High-quality multi-shielded PVC USB cable

Extras

High-speed Audio Optimized USB 3.0 C-Male to A-Male cable
Maximum data transfer rates up to 5 Gbps
Ergonomic UDG Design
Various colours makes them easy to identify

Fits

Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Notes: Connect your USB compatible gear with Audio Optimized UDG Ultimate Cables.

This USB 3.0 cable with a streamlined design helps DJ's and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official.

For devices with an older USB version, this cable is backward compatible so you can still make the connection.

Specifications

Colour: Orange
Length: 1.5 m | 4.92 ft
Weight: 0,10 kg / 0.22 lbs
Material: PVC + Metal

Protection

Constructed with corrosion-resistant, gold-plated connectors for optimal signal
Two ferrite chokes: help eliminate noise in both directions
Includes UDG Velcro strap for easy storage
High-quality multi-shielded PVC USB cable

Extras

High-speed Audio Optimized USB 3.0 C-Male to A-Male cable
Maximum data transfer rates up to 5 Gbps
Ergonomic UDG Design
Various colours makes them easy to identify

Fits

Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Notes: Connect your USB compatible gear with Audio Optimized UDG Ultimate Cables.

This USB 3.0 cable with a streamlined design helps DJ's and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official.

For devices with an older USB version, this cable is backward compatible so you can still make the connection.

Specifications

Colour: Red
Length: 1.5 m | 4.92 ft
Weight0,10 kg / 0.22 lbs
Material: PVC + Metal

Protection:

Constructed with corrosion-resistant, gold-plated connectors for optimal signal
Two ferrite chokes: help eliminate noise in both directions
Includes UDG Velcro strap for easy storage
High-quality multi-shielded PVC USB cable

Extras

High-speed Audio Optimized USB 3.0 C-Male to A-Male cable
Maximum data transfer rates up to 5 Gbps
Ergonomic UDG Design
Various colours makes them easy to identify

Fits

Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Notes: Connect your USB compatible gear with Audio Optimized UDG Ultimate Cables.

This USB 3.0 cable with a streamlined design helps DJ's and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official.

For devices with an older USB version, this cable is backward compatible so you can still make the connection.

Specifications

Colour: White
Length: 1.5 m | 4.92 ft
Weight: 0,10 kg / 0.22 lbs
Material: PVC + Metal

Protection:

Constructed with corrosion-resistant, gold-plated connectors for optimal signal
Two ferrite chokes: help eliminate noise in both directions
Includes UDG Velcro strap for easy storage

High-quality multi-shielded PVC USB cable

Extras

High-speed Audio Optimized USB 3.0 C-Male to A-Male cable
Maximum data transfer rates up to 5 Gbps
Ergonomic UDG Design
Various colours makes them easy to identify

Fits

Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Notes: Connect your USB compatible gear with Audio Optimized UDG Ultimate Cables.

This USB 3.0 cable with a streamlined design helps DJ's and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official.

For devices with an older USB version, this cable is backward compatible so you can still make the connection.

Specifications

Colour: Yellow
Length: 1.5 m | 4.92 ft
Weight: 0,10 kg / 0.22 lbs
Material: PVC + Metal

Protection

Constructed with corrosion-resistant, gold-plated connectors for optimal signal
Two ferrite chokes: help eliminate noise in both directions
Includes UDG Velcro strap for easy storage
High-quality multi-shielded PVC USB cable

Extras

High-speed Audio Optimized USB 3.0 C-Male to A-Male cable
Maximum data transfer rates up to 5 Gbps
Ergonomic UDG Design
Various colours makes them easy to identify

Fits

Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Notes: Connect your USB compatible gear with Audio Optimized UDG Ultimate Cables.

This USB 3.2 cable with a streamlined design helps DJ's and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official.

For devices with an older USB version, this cable is backward compatible so you can still make the connection.

Specifications

Colour Black
Length: 1.5 m | 4.92 ft
Weight: 0,10 kg / 0.22 lbs
Material: PVC + Metal

Protection:

Constructed with corrosion-resistant, gold-plated connectors for optimal signal
Two ferrite chokes: help eliminate noise in both directions
Includes UDG Velcro strap for easy storage
High-quality multi-shielded PVC USB cable

Extras

High-speed Audio Optimized USB 3.2 C-Male to C-Male cable
Maximum data transfer rates up to 20 Gbps
4k @ 60Hz video support
Ergonomic UDG Design
Various colours makes them easy to identify

Fits

Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Notes: Connect your USB compatible gear with Audio Optimized UDG Ultimate Cables.

This USB 3.2 cable with a streamlined design helps DJ's and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official.

For devices with an older USB version, this cable is backward compatible so you can still make the connection.

Specifications

Colour Blue
Length: 1.5 m | 4.92 ft
Weight: 0,10 kg / 0.22 lbs
Material: PVC + Metal

Protection:

Constructed with corrosion-resistant, gold-plated connectors for optimal signal
Two ferrite chokes: help eliminate noise in both directions
Includes UDG Velcro strap for easy storage
High-quality multi-shielded PVC USB cable

Extras

High-speed Audio Optimized USB 3.2 C-Male to C-Male cable
Maximum data transfer rates up to 20 Gbps
4k @ 60Hz video support
Ergonomic UDG Design
Various colours makes them easy to identify

Fits

Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Notes: Connect your USB compatible gear with Audio Optimized UDG Ultimate Cables.

This USB 3.2 cable with a streamlined design helps DJ's and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official.

For devices with an older USB version, this cable is backward compatible so you can still make the connection.

Specifications

Colour: Green
Length: 1.5 m | 4.92 ft
Weight: 0,10 kg / 0.22 lbs
Material: PVC + Metal

Protection:

Constructed with corrosion-resistant, gold-plated connectors for optimal signal
Two ferrite chokes: help eliminate noise in both directions
Includes UDG Velcro strap for easy storage
High-quality multi-shielded PVC USB cable

Extras

High-speed Audio Optimized USB 3.2 C-Male to C-Male cable
Maximum data transfer rates up to 20 Gbps
4k @ 60Hz video support
Ergonomic UDG Design
Various colours makes them easy to identify

Fits

Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Notes: Connect your USB compatible gear with Audio Optimized UDG Ultimate Cables.

This USB 3.2 cable with a streamlined design helps DJ's and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official.

For devices with an older USB version, this cable is backward compatible so you can still make the connection.

Specifications

Colour Orange
Length: 1.5 m | 4.92 ft
Weight: 0,10 kg / 0.22 lbs
Material: PVC + Metal

Protection:

Constructed with corrosion-resistant, gold-plated connectors for optimal signal
Two ferrite chokes: help eliminate noise in both directions
Includes UDG Velcro strap for easy storage
High-quality multi-shielded PVC USB cable

Extras

High-speed Audio Optimized USB 3.2 C-Male to C-Male cable
Maximum data transfer rates up to 20 Gbps
4k @ 60Hz video support
Ergonomic UDG Design
Various colours makes them easy to identify

Fits

Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Notes: Connect your USB compatible gear with Audio Optimized UDG Ultimate Cables.

This USB 3.2 cable with a streamlined design helps DJ's and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official.

For devices with an older USB version, this cable is backward compatible so you can still make the connection.

Specifications

Colour Red
Length: 1.5 m | 4.92 ft
Weight: 0,10 kg / 0.22 lbs
Material: PVC + Metal

Protection:
Constructed with corrosion-resistant, gold-plated connectors for optimal signal
Two ferrite chokes: help eliminate noise in both directions
Includes UDG Velcro strap for easy storage
High-quality multi-shielded PVC USB cable

Extras:

High-speed Audio Optimized USB 3.2 C-Male to C-Male cable
Maximum data transfer rates up to 20 Gbps
4k @ 60Hz video support
Ergonomic UDG Design
Various colours makes them easy to identify

Fits:

Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Notes: This USB 3.2 cable with a streamlined design helps DJ's and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official.

For devices with an older USB version, this cable is backward compatible so you can still make the connection.

Specifications

Colour: White
Length: 1.5 m | 4.92 ft
Weight: 0,10 kg / 0.22 lbs
Material: PVC + Metal

Protection:

Constructed with corrosion-resistant, gold-plated connectors for optimal signal
Two ferrite chokes: help eliminate noise in both directions
Includes UDG Velcro strap for easy storage
High-quality multi-shielded PVC USB cable

Extras

High-speed Audio Optimized USB 3.2 C-Male to C-Male cable
Maximum data transfer rates up to 20 Gbps
4k @ 60Hz video support
Ergonomic UDG Design
Various colours makes them easy to identify

Fits

Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Notes: Connect your USB compatible gear with Audio Optimized UDG Ultimate Cables.

This USB 3.2 cable with a streamlined design helps DJ's and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official.

For devices with an older USB version, this cable is backward compatible so you can still make the connection.

Specifications

Colour Yellow
Length: 1.5 m | 4.92 ft
Weight: 0,10 kg / 0.22 lbs
Material: PVC + Metal

Protection:

Constructed with corrosion-resistant, gold-plated connectors for optimal signal
Two ferrite chokes: help eliminate noise in both directions
Includes UDG Velcro strap for easy storage
High-quality multi-shielded PVC USB cable

Extras

High-speed Audio Optimized USB 3.2 C-Male to C-Male cable
Maximum data transfer rates up to 20 Gbps
4k @ 60Hz video support
Ergonomic UDG Design
Various colours makes them easy to identify

Fits

Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Notes: Optional accessory replacement panel.

Black anodised alu + heavy duty screen printing.

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


Zoom's top-of-the-range handheld recording option, the H6essential records up to six tracks via built-in stereo mics and four mic/line inputs. Top quality 32-bit/96 kHz recording quality.

Supplier's Notes:
Zoom H6essential Handy Recorder

The Flagship - Zoom's most robust handheld recorder, the H6essential is a recording powerhouse. With 6 tracks of 32-bit float recording, the H6essential provides unprecedented quality and unmatched versatility.

Features

6-track 32-bit float recorder with Dual A/D Converters
Clip-free recording with no need to set gain
Records up to 96kHZ sample rate
Interchangeable Mic Capsule System 3.0 with 32-bit float support
Included X/Y Mic Capsule captures up to 135 dB SPL
4 XLR/TRS combo inputs with locking connector
Colour LCD Screen
Built-in mixer to adjust each track's audio level
Built-in speaker for quick reference playback
3.5mm headphone output plus 3.5mm line output
Voice Guidance accessibility for the visually impaired
32-Bit Float audio interface for PC, Mac, iOS, and Android devices via USB-C port
Use as an interface and record to SD card simultaneously
Using the BTA-1* Bluetooth Adapter, sync with wireless timecode devices via bluetooth
Use the BTA-1* Bluetooth Adapter to pair with the H6essential Control App for iOS
Record to SD cads up to 1TB
10 hours of battery life on AA battery (2x) or USB-C Bus Power
*Please note: BTA-1 Adapter not included

Outputs you need

Use the line output to connect to a camera and the headphone output to monitor your audio.

Quieter controls

Recording and rotary controls have been meticulously designed to allow for silent operation.

Onboard speaker

Use the improved onboard speaker to listen to your recordings for quick reference.

Six perfect tracks

The 4 XLR/TRS combo inputs feature ultra-clean Zoom preamps, and the included X/Y microphones can capture up to a booming 135 dB SPL, equivalent to a jet taking off.

Record and stream

Use the USB-C port to connect to PC, Mac, iOS, and Android device to use the H6essential as a 32-bit float interface while simultaneously recording all 6 tracks to an SD card.

Pair with your iOS device

Use the BTA-1* Bluetooth Adapter to pair with your iOS device to remotely hit record, adjust your mix, view your waveforms, and change settings.

Bluetooth timecode

With the BTA-1* Bluetooth Adapter you can also pair with Bluetooth timecode devices for audio and video sync. *BTA-1 Adapter not included.

Specs

Input & output channels

Inputs
Mic capsule: 1
MIC/LINE (mono): 4

Outputs
LINE OUT: 1
Headphones: 1
Built-in speaker (mono): 1

INPUTS
XY mic: XYH-6e: 90O XY stereo format
Directionality: Unidirectional
Sensitivity: -42dB/1Pa at 1kHz
Maximum sound pressure input: 135 dB SPL

MIC/LINE (mono)
Connectors: 4 XLR/TRS combo jacks (XLR:2 HOT TRS:TIP HOT)
Input gain: Adjustment unnecessary (dual A/D converter circuits used)
Input impedance: MIC: 3.8 kO or more, LINE: 39 kO or more
Maximum input level: MIC: +4 dBu, LINE: +24 dBu
Phantom power: +48 V
Channel total: 32 mA or less
Equivalent input noise MIC: -120 dBu or less(IHF-A) @150 O input, LINE: -95 dBu or less(IHF-A) @600 O input

OUTPUTS

LINE OUT
Connector: Stereo mini jack
Maximum output level: +1 dBu
Output impedance: 110 O or less

Headphones
Connector: Stereo mini jack
Maximum output level: 20 mW + 20 mW(when 32 O load)
Output impedance: 10 O or less

Built-in speaker
Type: 20 mm x 30mm elliptical dynamic speaker
Effective maximum output: 250mW

RECORDER
Maximum simultaneous recording tracks: 8
Maximum simultaneous playback tracks: 6

Recording formats:
WAV
44.1/48/96 kHz,
32-bit float mono/stereo
BWF and iXML formats supported

Recording media: 4-32GB cards compatible with the microSDHC specification, 64GB-1TB cards compatible with the microSDXC specification

Display: 2.0-inch full-colour LCD 360 x 240

USB
Connector: USB Type-C - Use a USB cable that supports data transfer.
Audio Interface : USB 2.0 High Speed
Input and output channels: 6 in / 2 out (Multi), 2 in / 2 out (Stereo)
Sampling frequency: 44.1/48/96 kHz (AIF only), 44.1/48 kHz (AIF + onboard recording)
Bit depth: 24-bit, 32-bit float
File transfer: USB 2.0 High Speed

Remote

Dedicated wireless adapter: ZOOM BTA-1

Power

4 AA batteries: Alkaline, lithium or rechargeable NiMH batteries
AC Adapter: ZOOM AD-17 (DC 5 V/1 A) - USB bus power is supported.

Estimated continuous operation times using batteries: 2-track recording (XYH-6e)
Alkaline batteries: About 18 hours
NiMH batteries (1900 mAh): About 14.5 hours
Lithium batteries: About 30 hours

48 kHz/32-bit float with phantom power off, no headphones, no LINE OUT, no REMOTE, Power Saving on, Display Brightness Medium
These values are approximate.
Continuous battery operation times were determined using in-house testing methods.They will vary greatly according to use conditions.

Estimated continuous operation times using batteries: 6-track recording (XYH-6e and inputs 1-4)
Alkaline batteries: About 3.5 hours
NiMH batteries (1900 mAh): About 4 hours
Lithium batteries: About 9 hours
48 kHz/32-bit float with phantom power off, headphones used (33O load), no LINE OUT, no REMOTE, Power Saving on, Display Brightness Medium
These values are approximate.
Continuous battery operation times were determined using in-house testing methods.They will vary greatly according to use conditions.

Power consumption: 5 W maximum

Dimensions
Recorder: 78.1 mm (W) × 160.1 mm (D) × 42.8 mm (H)
XYH-6e: 69.1 mm (W) × 50.8 mm (D) × 43.0 mm (H)
Weight Recorder: 381 g (including batteries)
XYH-6e: 42 g
Note: 0 dBu = 0.775 Vrms

Review: Talented LA producer 1morning makes his debut on the well regarded Character label here and brings plenty of the know how he has picked dup while laying down his superb vinyl DJ sets around the world. He fuses new school funky and tribal techno with subtle hints that suggest he has a love of 90s originators like Ben Sims and Dave Angel. 'Samba De Verao' is a dense, high intensity sound with skewed synths and dusty hi hats while 'Flux' is more deep and has throbbing drums and smeared pads fleshing out the groove. On the flip are two more emotionally intense and fantastically engaging techno cuts.

Review: West Coast Classics US has taken the hip-hop community by storm with their ability to license such seminal west coast tracks. With an extra focus on gangster rap, the label offers a classic on each side of a 7". Their sixth release has a couple of killers on it! 2pac and Dr.Dre's 'California Love' really needs no introduction. A legendary track that ate up the airwaves around the world and on MTV when it was released in 1996. Not to be outdone, Ice Cube covers the B-side with one of his most important solo tracks that established him after leaving NWA., 'Jackin For Beats'. Getting original copies of these on wax would cost a day's wage for most people. Like the label suggests, these are West Coast Classics and are blueprints for gangster rap.

Review: Humanoid Recordings co-founder 4d lays down another four-track 12" for the label, scouring the weightier and scrapier ends of minimal and acid house, all while teasing out a retro-robotic edge. Only an artist with a real sense of humour can invoke ideas of 'Stupidity' and 'Quantum Theory' in the same breath; both tracks betray the unified whimsy and intelligence that a successful acid house and techno artist must portray in order to win hearts. The latter uses a particularly sticky, hard-to-pin-down 4x4 kick style; contrast to B1 'World In Our Head', which portrays a psychic model of the outside world through trilling trance lines, and the meek glissandos of 'Sowie Lockers', securing an indeterminate but funky mood.

Review: The Veiltail EP by 747 features two heavyweight songs: 'Veiltail', which is a driving, heavy cascading melodic track with bubbling acid flourishes and a touch of soaring trance influence, and 'Stairway', which is a more electro-slanted track that's nevertheless just as pulsating and dramatic as its predecessor, perhaps a touch of Rephlex-style aural radioactivity. The Canadian label Aquaregia continues to be a trendsetter in the very competitive genre.

Review: Prepare for a transcendent auditory odyssey with The Sevens, a series of four 7" vinyl records unveiling a treasure trove of previously unreleased tracks from the sessions that bore A Place To Bury Strangers' acclaimed album, See Through You. Known for their visceral sonic assault and immersive live performances, the series offers fans a deeper dive into their sonic universe. 'Don't Turn The Radio'/'This Is All For You', the third release in the series, delivers a raw and personal glimpse into the band's creative process during the See Through You era. APTBS founder Oliver Ackermann explains the decision to return to their roots with this release format, allowing each track to speak for itself without album context. These tracks offer a stark contrast to the band's current sound, providing a snapshot of a moment in time.