Back catalogue: All genres

Notes: ***B-STOCK: Box opened, product in perfect working order***


Use familiar gestures to easily animate the sound of your favourite hardware and software synths.

Push your favourite synths further

Press Touche to activate a filter on your hardware synth or gently bow Touche's plate to add arpeggiator action to your favourite software synth. These are 2 examples of the many possibilities Touche can interact with your gear. This standalone MIDI controller simply translates your gestures into data (MIDI, CV or USB). Touche precisely allows you to modulate any sound, from the subtlest brush to the wildest strike.

Sturdy & precise

Touche boasts a solid monoblock design with few replaceable moving parts, equipped to translate anything from the softest touch to the roughest rhythms, with pinpoint precision.

Universally compatible

Touche is compatible with any software or hardware synthesizer thanks to its built-in CV, MIDI and USB outputs. Internal memory even lets you control hardware synths without a computer.

Ready to use

Touche can control all your favourite third-party software instruments too. Pre-made mappings for all best-selling VST instruments, as well as hardware instruments, are included.

Sounds included

Touche ships with UVI Workstation, a plug-in providing over 250 custom-designed instrument sounds. These sounds come pre-mapped with Touche so you can focus on producing.

A new, tactile playing experience

Touche bypasses the traditional limitations of most synths' and MIDI controllers' keybeds, seamlessly connecting your gestures to sound. Less programming, less automation, more creativity!

4 degrees of freedom

Each direction on the control surface affects different parameters. Combine movements for amazing effects.

Capturing precision

Touche captures your movements with pinpoint precision. Record incredible performances in real time.

Get percussive

Tap your melodies rhythmically, creating percussive tones unique to the Touche family.

Hands down

Discover new ways to articulate your sounds with your keyboard and Touche working in harmony.

A powerful companion software

Meet Lie, Touche SE's control centre and companion software. Lie allows you to:

Browse easily the included sound library (+250 presets)
Host any third party plug-in and map it to Touche and Touche SE
Create mappings for hardware gear in a blink (Touche only)
Adjust Touche's sensitivity to your taste

Rediscover your favourite hardware synths

Touche includes more than 250 hardware synthesizer mapping presets - providing instant, ready-mapped control of the factory presets included with most popular synthesizers.

Rediscover your favourite plugins

A beautifully engineered hardware instrument, able to translate anything from the softest touch to the roughest rhythms, with pinpoint precision.

Extraordinary sounds included

Touche comes with a professionally-designed sound library, so you can start exploring right after installation. Explore ripping basses, soaring leads, evocative pads and pounding percussion, all pre-mapped to take full advantage of the hardware.

Expand your soundscape with Touches expansions and instruments plugins

Need more sounds? Expansions and instrument plugins are an ideal playground for Touche. Discover a whole new universe of sounds and playing articulations, fully compatible with Touche and its software companion, Lie.

Touch plate

We are all different, and your Touche can be different too. You can fully perfect your Touche's response with adjustable controls, and you can even customise its appearance with our range of alternative touch plate finishes, available separately.

Cylinder

The cylinder is the heart of the Touche - it controls exactly how your Touche reacts to pressure. The 'Shore 40 Pink Cylinder' is the classic all-rounder and is included with Touche. It's suited for a wide range of gestures, soft or hard, progressive or percussive. But for those interested in a softer or harder response, we have a range of other cylinders to try.

No computer required

Touche can operate completely standalone, controlling MIDI and CV hardware without a computer connected. Pre-prepare your perfect control mappings and select and recall them live onstage - Touche is the perfect companion for adding expression to your live rig.

Touche

USB: USB Powered
MIDI in: 1/8" (3.5mm) jack socket
MIDI out: 1/8" (3.5mm) jack socket
CV: 4 x 1/8" (3.5mm), up to -10V to 10V
Axe: 4 axes with customizable sensitivity
Lie: Lie: macOS 10.11 and higher / Windows 10, VST / AU format, hosts VST instruments only
Dimensions: 9.7" x 3.9" x 2.4" / 246 x 100 x 62 mm

Box content:
Touche
1x USB Cable
2x MIDI break-out cable (jack to DIN)
1x Ground Loop Adapter

Notes: ***B-STOCK: Box opened, product in perfect working order***


Unassuming looks conceal the excellent EaganMatrix sound engine, offering USB-powered synth creativity perfectly matched to Haken's own Warbl Wind Controller but also compatible with MIDI and MPE.

Supplier's Notes:
EaganMatrix Micro

The power of EaganMatrix Sound Technology in Haken's smallest product ever! The EaganMatrix Micro is a full-featured EaganMatrix sound engine in a small self-contained form factor, and is powered and controlled via USB.

The EaganMatrix Micro provides a truly versatile framework for both studio and live performance, with a robust implementation of MPE and MPE+ Midi.

The EaganMatrix Micro is a perfect companion to the amazing Warbl Wind Controller.

The fingering holes on the Warbl are not just switches. You can hear that the pitch starts off a bit as the finger gets close to the hole (like it would on an acoustic wind instrument) and hits the final pitch once the hole is covered. It's a subtle effect but important. The following video shows 15 Presets from the Micro's demo assortment that Edmund Eagan skillfully customized to take advantage of the Warbl's specific sensing technology. In the future there may be demo assortments customized for the sensing technologies of other devices.

Hundreds of System Presets are included with the EaganMatrix Micro. An external cross-platform (Mac and PC) Haken Editor may be connected to modify and customize the supplied EaganMatrix System Presets, or create completely new presets from scratch.

The EaganMatrix Sound Technology, originally created for the highly sensitive Continuum, is now available to you in this compact form factor.

EaganMatrix Micro Connections
1. USB Power and Midi (shown connected).
2. Foot Pedal or Haken Audio CVC communication.
3. Stereo Audio Out.

Haken Audio's EaganMatrix Micro offers:
Polyphony: Nominal 1-3, Maximum 8
Stereo Audio Output: 3.5 mm TRS
EXT Connection: 3.5 mm TRS

Can be used as a pedal input (Yamaha FC3A with HOSA MHE-100.5 is recommended),
or it can be configured for a Control Voltage Converter.

Seven Segment Display: Preset navigation and settings
USB Power: 500 mA (190 mA average actual usage), via Mini USB connector
USB Midi: via Mini USB connector (USB-A to Mini USB cable included with purchase)
Allows bidirectional MPE and MPE+ connection to other devices; allows connection to the Haken Editor for editing and archiving EaganMatrix presets
Dimensions: 11.3 x 5.8 x 1.9 cm (4.4 x 2.3 x 0.75 inches)
Weight: 0.075 kg (2.6 oz)

Notes: Silver version of Hercules's Inpulse 500. Designed for Serato and Djuced, this two-deck DJ controller offers excellent value for money and industry-standard features to help develop your mixing skills.

Supplier's Notes:
The DJ Control Inpulse 500 Silver Edition is more than just a DJ controller - it's a complete package designed to ignite your passion for DJing

This special edition boasts sleek silver-coloured finishes, combining aesthetics with cutting-edge technology to enhance your performance. Whether you are a beginner looking to master the basics or an experienced DJ seeking advanced features for a mobile setup, the Inpulse 500 Silver Edition delivers everything you need to make your mark.

It includes a transport bag, ensuring your gear stays protected anywhere effortlessly, Serato DJ Lite + compatibility with Serato DJ Pro (upgrade licence required), and and a license key to the all-new DJUCED Pro software with performance-ready features for any kind of DJ, such as VJing, Day mode, advanced FX and so much more.

A unique DJ controller for live performances

Stand out with the elegant silver finish that adds a touch of sophistication to your setup. The sleek and modern aesthetic not only looks great but also complements any professional or home studio environment.

DJUCED Pro

Gain access to DJUCED Pro software, providing you with powerful tools to mix and create your unique soundscapes. This comprehensive software offers an intuitive interface, advanced features, and seamless integration with your DJControl Inpulse 500 Silver Edition controller.

Advanced software features

With Unlock mode, you can get ready for your performance without having to connect your DJ controller. You can analyze, add hot cues, add saved loops and test your transitions with just your laptop. With Remapping, you can assign different functions or commands to the knobs, buttons, pads and faders on your DJ controller to tailor your gear to your specific preferences or workflow.

Interactive performances made easy

With the new VJing feature in DJUCED Pro, you can incorporate visual elements from a built-in library of video loops that sync to your music and enhance your performance.

Ready for wherever your DJ career takes you

Protect your gear on the go with the included high-quality transport bag, designed specifically for the DJControl Inpulse 500. This durable bag features padded compartments and reinforced stitching to ensure your equipment stays safe during travel.

Professional-grade audio connectivity

The controller features a range of inputs and outputs, including 2x RCA and 2xTS master outputs, a microphone input, an AUX input, and a headphone output for seamless integration with your setup. This ensures you can connect to any sound system or external equipment with ease.

Beatmatch Guide

Master the art of DJing with the helpful light guides that assist with beatmatching, syncing, and understanding the layout. These visual aids are perfect for beginners and provide an extra layer of support for experienced DJs looking to refine their skills.

Intelligent Music Assistant (IMA)

Get song recommendations based on your library to keep the energy up and the crowd dancing. The IMA helps you maintain a seamless flow of music, ensuring you always have the perfect track ready to go.

Specifcations

Audio
44.1 kHz / 24-bit AUX input 3.5 mm Headphone output 3.5 mm + 6.3mm Microphone input 6.3mm Master outputs: 2 x RCA + 2 x TRS

Mixer controls
1 Filter, 3 EQ, 1 Gain and 1 volume fader per deck Crossfader, volume master, headphone volume, master and deck VU meters Headphone cue to mix, microphone volume, microphone 2-band EQ AUX volume, AUX Filter Filter/FX rack with 4 FX select buttons and 2 rotary knobs

Deck controls
Touch-sensitive jog wheel Tempo fader 8 pads x 8 modes (Hot-Cue, Loop, Stems, Sampler) Vinyl/Slip/Quantize Loop In/Loop Out buttons Autoloop knobs

Minimum system requirements

Intel Core i7
Windows 10 & 11
AMD Ryzen 5 3000 series or higher (Serato)
Apple M1 or better
macOS 12 or later
8 GB RAM or more

What's in the box

DJControl Inpulse 500 Silver Edition controller
Controller unlocks DJUCED and Serato DJ Lite licenses
DJUCED Pro license card

Notes: Quirky synth fun from JMT, the NDE-1 is based around two oscillators, sample and hold, noise generator and a four-pole low-pass filter. Generate random tones, control via a sequencer or process external audio.

Supplier's Notes:
This model consists of two VCOs (oscillators), SAMPLE & HOLD, noise generator, low-pass filter, LFO, VCA, and envelope generator to create a powerful sound.

By itself, a wide range of sounds can be created, including random and regular intermittent sounds, mute timing, and fine-tuning of levels.

If you input sounds from other equipment through the A IN, you can apply a variety of filters, LFOs that oscillate the filters, and mutes to the input sounds in parallel with the built-in oscillator.

The variable range is wide enough to produce a variety of sounds. The filter is a 4-pole filter that works very smoothly, and external audio can be input via A IN.

You can also use it with a sequencer to create even more sounds.

CV INPUTs can accept - + 9V. Do not exceed this voltage.

The adapter is not included.

Please use centre negative 9V POWER SUPPLY or A 9V battery.

Notes: The UNVO-1b powered by a centre negative DC 9V adapter or a single 9V battery.

It also contains two VCOs (oscillators) with a wide range.

The frequency and waveform of the SUB oscillator are changed, and they are input to the main, respectively. Each of them has a range switch, so it works like an LFO under the switch. The colour of the range switch (white, black) corresponds to the colour of the SUB.1 and SUB.2 on-off switches next to the FREQ knob of the main oscillator.

When the WAVE switch is turned on, the WAVE knob is activated, and the SUB OSCILLATOR.1 and 2 are shaken.

The main VCO×2 is mixed and fed into the strain + filter circuit. This special filter has a FREQ knob and a TUNE knob. The TUNE knob powerfully amplifies the input signal while also tracking specific pronunciations.

The filter is a circuit that has been fine-tuned so that it can very effectively enhance the bass and treble of this input signal.

Unlike other switches, the noise-on switch moves sideways, left (VCO.1), middle (OFF), and right (VCO.2). They are populated in VCO.1 and 2, respectively.

The UNVO-1b is a noise machine that can output a very strong signal that generates a variety of noise sounds.

The black painted aluminium die-cast case is painted with a black matte paint with a laser and scraped to make letters.

This analogue synth runs on DC9V negative centre or a 9V battery.

The main 2 VCOs can receive 2 oscillators and noise generator inside and go to 2 different filters.

2 oscillators can be tuned with each two FREQ. knobs and controlled with the wave knob.

RED switch is for wave knob working.
Black and White for tone of oscillators

Notes: A premium take on the classic portable turntable concept, the Handytraxx solid playback and compact design, plus contemporary features including digital effects, looping and a built-in fader for scratching.

Supplier's Notes:
Handytraxx Play

Portable vinyl performance, perfected.

The Handytraxx Play reimagines the classic portable turntable with modern innovation. Designed for DJs, vinyl enthusiasts, and creative performers, it combines portability with cutting-edge features, including unique Korg digital effects, a built-in audio looper, and a high-quality fader optimised for scratching. Developed in collaboration with Toshihide Nakama, co-creator of the original Handy Trax, this redefined turntable blends tradition and technology, delivering a truly unparalleled experience for music lovers on the go. Whether you're spinning at home or showcasing your skills anywhere, the Handytraxx Play is your perfect companion.

Key features

A portable player that lets you enjoy playing records and performing as a DJ, wherever you go
Unique Korg digital effects.
Audio looper for a wide range of musical expression and creativity
High-quality fader optimized for scratching
Custom-designed tonearm and motor control circuit
Developed in collaboration with Toshihide Nakama, former President of Vestax Inc.

The Handy Trax, originally created by Vestax, redefined portable turntables by giving users the freedom to play and scratch records anywhere. Beloved by DJs and vinyl enthusiasts alike, it helped spark the rise of "portablism".

Now, Korg proudly reinvents this iconic turntable with the Handytraxx Play. Developed in collaboration with Toshihide Nakama, former President of Vestax and co-creator of the Handy Trax, the Handytraxx Play retains the essence of the original while introducing exciting new features. These include cutting-edge digital effects, a built-in looper, and high-quality controls that make it possible to physically "play" with records on the go. Combined with unique customisation options, the Handytraxx Play delivers an unparalleled portable turntable experience. Perfect for casual vinyl lovers and hardcore portablists alike.

Honouring Toshihide Nakama

The Handytraxx Play is the result of a collaboration between Korg and Toshihide Nakama, the former President of Vestax and co-developer of the original Handy Trax. Developed closely with Nakama as an all-new kind of record player, the Handytraxx Play leverages Korg's unique digital processing and audio technologies while staying true to the spirit of the original Handy Trax. Tragically, Nakama passed away during the development of the Handytraxx Play on June 10th, 2023, but his vision and philosophy live on through this product, carrying his legacy to music lovers worldwide.

Optimised for scratching

The Handytraxx Play has been meticulously designed to provide an exceptional scratching experience. The high-quality fader, developed under Nakama's guidance, offers super smooth, precise motion and minimised silent zones for effortless cuts and transitions. Beginners and seasoned portablists alike will appreciate the responsive feel and the ability to reverse scratch by swapping crossfader channels. Every detail of the fader has been optimised to enhance performance while maintaining the portability that defines the Handytraxx Play.

Unique digital effects

Korg's expertise in digital audio processing brings powerful effects to the Handytraxx Play, elevating its creative potential.

Three types of filters

The Handytraxx Play offers three versatile filter types, each designed to provide dynamic control over your sound. The DJ filter seamlessly blends low-pass and high-pass filters, allowing smooth transitions. The EQ filter with a low isolator enhances bass frequencies for deep, impactful tones. Lastly, the peaking wah filter with modulation adds a unique, expressive touch, letting you shape bold experimental sounds or subtle nuanced effects in real time.
Delay
In addition to filters, the Handytraxx Play features a built-in delay effect that expands your creative possibilities. From creating spacious, ambient soundscapes to bold, metallic echoes, the delay effect can be controlled intuitively using the vertical fader for precise level adjustments.

This seamless integration of effects makes the Handytraxx Play an essential tool to enhance any DJ performance.

Built-in audio looper and versatile playback control

The Handytraxx Play includes a built-in looper that redefines creativity for DJs and vinyl enthusiasts. With its variable speed control switch, the looper lets you capture and replay live playback of a record's sound-a feature known as live looping. This capability allows you to craft unique DJ mixes by adding scratches to a looped beat, recording your favourite sounds to use as a sampler, or even swapping records while the loop continues to play seamlessly. The looper's versatility makes it an essential tool for both experimentation and live performance.

The variable speed control switch provides intuitive options for adjusting playback speed, a fundamental requirement for DJs. You can effortlessly switch between 33 and 45 RPM or fine-tune the variable speed ratio to match your creative needs. This adaptability extends to layering recordings over existing loops- for instance, playing back a beat loop at your chosen speed and overlaying scratching sounds on top. The Handytraxx Play's looper opens new possibilities for musical expression, offering endless opportunities to innovate and perform.

Precision craftsmanship

Every component of the Handytraxx Play has been crafted for superior performance. The custom-designed tonearm offers high-level tracing performance, minimising needle skipping during playback and scratching. A belt-driven motor with digital rotation correction ensures stable platter rotation and quick recovery for incidental effects that sound natural. Refinements to the turntable mechanism further reduce skipping, allowing for consistent, reliable performance during even the most demanding scratch play.

Groove on the go

Designed for ultimate portability, the Handytraxx Play can be powered by the included AC adapter or six AA batteries, giving you the flexibility to take your music anywhere. The built-in 2.5W speaker delivers impressive sound with rich bass and clear playback, whether you're connected to external speakers or not.

Flexible customisation

A redesigned headshell supports both ceramic and MM cartridges*, offering flexibility for various playback styles. Users can replace the scratch fader or reorient the control panel for right- or left-handed use, ensuring comfort and adaptability for every DJ. These thoughtful customisation options make the Handytraxx Play a truly personal and versatile tool, perfect for creating and performing.

* Basic soldering skills are required for replacing ceramic and MM cartridges.

Specifications

Drive system: Belt-driven (with digital rotation correction)
Drive motor: DC servo motor
RPM: 33-1/3, 45 or 78 revolutions per minute
S/N (signal-to-noise) ratio: Less than 60 dB (DIN-B)
Cartridge model: Stereo ceramic cartridge included (MM supported)
Maximum input level: AUX IN: 2.5 Vp
Maximum output level: LINE OUT ? 2.3 Vp, THD 1%, PHONO OUT: 300 mV (1 kHz, 5cm/sec)
PHONO preamp gain: Standard value: 34.5 dB; equalizer characteristics: RIAA
Digital signal processing
A/D, D/A: 44.1 kHz@16-bit, stereo
Crossfader: 44.1 kHz, 32-bit float, stereo
Mix: 44.1 kHz, 32-bit float, stereo
Looper: 44.1 kHz, 16-bit, stereo; max. recording time: approx. 20 sec
Filter: 44.1 kHz, 32-bit float, stereo; type: OFF, FILTER1, FILTER2, FILTER3
Delay: 44.1 kHz, 32-bit float, stereo; feedback (0%-80%), time (1,000 ms-10 ms)

Power consumption: 2.35 W
Power supply: AC adapter (included), six AA batteries (alkaline or nickel-metal hydride) Weight: 2.3 kg/5.07 lb
Dimensions: 370 x 280 x 84 mm/14.57? x 11.02? x 3.30?; with cover on: 370 x 286 x 87 mm/14.57" x 11.26" x 3.43"
Included items AC adapter, AC adapter replacement plug (5 types), dust cover, slip mat, EP adapter, Quick Start Guide

Notes: Excellent polyphonic hybrid synth module from Michigan Synth Works, based on the Mutable Instruments Ambika. Six digitally generated voices are processed through a Polivoks-derived low-pass filter. Also available with Roland-style Shruthi SMR4mkII filter.

Supplier's Notes:
Xena is a rework of the legendary Mutable Instruments Ambika DIY synthesiser. Now fully machine assembled with an updated layout and an improved modern power supply. Available with all original 3 voice cards and compatible with 3rd part operating systems as well as a new AS3109 (modern reissue of the original Roland filter chip) filter

Xena Features:

6 voices with individual outputs, one Mix output (Mono)
2 digital oscillators per voice, with 36 oscillator algorithms/wavetables.
1 sub-oscillator, also configurable as a transient generator.
Pre-filter overdrive and bit-crushing effect.
Analogue 4-pole filter (or 2-pole multimode filter depending on the type of voicecard used) and VCA.
3 ADSR envelopes, 3 patch-level LFOs, 1 voice-level LFO.
Modulation matrix with 14 slots and 4 modulation modifiers.
1 arpeggiator, 1 note sequencer and 2 step sequencers per part.
Flexible mapping of the 6 voices. A single patch with 6 voice-polyphony, 6 independent mono parts, 2 layered patches with 3-voices polyphony, a 3-voice unison bass line on the lower half of the keyboard with a 3-voice unison lead on the upper half... all are possible!
MicroSD storage allows the storing of a life-long of patches, programs and multis, along with the history of editing operations for undo/redo.
Easy to change voice cards
Case size: 10.5"x6.5"x1.75"

Filter Options:

The device is available with the original 3 Mutable voice cards (more will be added later one). Mixing voice cards is possible but not recommended.

SMR Filter: This filter uses the same topology as the Shruthi SMR4mkII. It is a low pass 4 pole OTA-C filter. Its is a smooth "Roland-ish" type filter.
4P Filter: This filter uses the same core as the Shruhti 4-Pole Mission but only offers the LP4 output. The 4P filter is perhaps a a bit fuzzier than the SMR type.
SVF Filter: This filter board features a 2-pole state variable filter with low-pass, band-pass and high-pass modes. It is half of the Shruthi SVF Filter.

Includes:

Xena Desktop Synth
12V DC universal (100-240V) Power Supply
Preformatted SD card

Notes: ***B-STOCK: Box opened, product in perfect working order***


*** Complimentary warranty on this product for 5 years if purchased from Juno- UK warranty only***

This compact, portable and lightweight audio interface (only 220 g /0.49 lbs) transfers digital audio data in SPDIF and ADAT format to Windows and Mac computers.

The latest Plug and Play technology guarantees a simple installation, even for the inexperienced user. Numerous unique features as well as RME's robust drivers enable a quick, efficient and comfortable operation of the Digiface USB.

The Digiface USB is an extremely compact & portable digital audio interface with 4 optical ADAT / SPDIF I/Os, and an analog high-quality line/phones output via 6.3 mm TRS jack. Continuing the legacy of RME's famous HDSP Digiface, a triple ADAT I/O interface with phones and PCI interface, Digiface USB simplifies connection with USB 2, does not need an external power supply, and even adds another optical I/O, resulting in 32 channels input and output each when using ADAT optical.

The analog output hosts channels 33/34, and can be used freely thanks to TotalMix FX, RME's routing and monitoring solution that knows nearly no limits in routing and mixing (the Digiface USB does not include FX).

Each single optical port can use either ADAT (up to 8 channels) or SPDIF (stereo). While the inputs adapt automatically to the received signal format, the outputs can be individually switched between ADAT and SPDIF operation. Supported are SMUX and SMUX4. Therefore at 192 kHz either 8 channels via 4 x SPDIF or ADAT are possible on both inputs and outputs.

Its small size, weight and bus-powered operation make the Digiface USB extremely versatile and useful. It could even serve as simple headphone amp for mobile use.

Like all the latest RME interfaces, the Digiface USB also includes the powerful digital real-time mixer TotalMix FX. It allows for practically unlimited mixing and routing operations, with all inputs and playback channels simultaneously, to any hardware outputs. The Digiface USB does not have a DSP, so there are no FX available. Still it includes a dedicated Control Room section with Talkback, Main/Phones, fader groups, mute groups, complete remote controllability via Mackie or OSC protocol, and much more.

Here are some typical applications for TotalMix:

- Setting up delay-free submixes (headphone mixes). The Digiface USB allows for up to 17 fully independent stereo submixes. On an analog mixing desk, this would equal 34 Aux sends.
- Unlimited routing of inputs and outputs (free utilisation, patchbay functionality).
- Distributing signals to several outputs at a time. TotalMix offers state-of-the-art splitter and distributor functions.
- Simultaneous playback of different programs via a single stereo output. The ASIO multiclient driver supports the usage of several programs at the same time. When done on different playback channels TotalMix provides the means to mix and monitor these on a single stereo output.
- Mixing of the input signal to the playback signal (complete ASIO Direct Monitoring). RME not only is the pioneer of ADM, but also offers the most complete implementation of the ADM functions.
- Integration of external devices. Use TotalMix to insert external effects devices, be it in the playback or in the record path. Depending on the current application, the functionality equals insert or effects send and effects return, for example as used during real-time monitoring when adding some reverb to the vocals.
- Every single input channel, playback channel and hardware output features a Peak and RMS level meter, calculated in hardware. These level displays are very useful to determine the presence and routing destinations of the audio signals.

Notes: Shik's 32-knob MIDI controller offers customisable, rock solid performance. Set up macros, program knobs to control your key parameters and develop your own hands-on performance interface.

Supplier's Notes:
A Versatile Macro MIDI Controller

Simplify Your Workflow, Manage Multiple Parameters with a Single Knob

Juggling complex controls can disrupt your creativity. The N32B Slim, with 32 programmable knobs and up to 4 macros per knob, makes managing multiple instruments seamless and intuitive.

Customize each macro to send MIDI messages, define ranges, invert directions, assign channels, and select output ports - offering unmatched flexibility for your setup.

Versatile MIDI Message Support

The N32B Slim is built to handle a wide range of MIDI messages, offering precision and adaptability for any musical setup. Supported message types include:

Control Change
Program Change
RPN
NRPN
Aftertouch
High-Resolution MIDI
System Exclusive (SysEx)

MIDI Thru & Outputs

The N32B Slim offers MIDI Thru functionality and flexible output options, including MIDI-USB, TRS, or both simultaneously. Each macro can be individually configured to send messages to a specific output, giving you precise control and seamless integration with any setup.

High-Resolution Mode

With 4095 steps, the N32B Slim delivers exceptional precision compared to the standard 127 steps of most controllers. Fine-tune your sound with unparalleled detail for truly expressive adjustments.

Compact and Portable

The N32B Slim measures just 20.8 cm x 13.5 cm (8.19" x 5.31") with a sleek 1.9 cm (0.74") enclosure. Lightweight and travel-friendly, it fits effortlessly into your bag, making it an ideal companion for studio and on-the-go production.

Stylish and Strong

Designed with a sturdy metal frame, the N32B Slim is built to perform and look great in any setup. Its sleek design and durable construction make it a reliable, long-lasting addition to your gear.

Easy Customization

Fine-tuning your workflow is simple with the N32B Slim's intuitive web editor. Configure each macro to send any MIDI message type, define ranges, and adjust parameters with precision - all in just a few clicks.

Specs

Midi Message Types: Control Change, RPN, NRPN, Program Change, Aftertouch, SysEx
Resolution: High resolution - up to 4095 steps
Channels: 16 Global channels. Supports custom channel assignment for each macro
Presets: 10 quick presets, easily managed via our web editor with the ability to import/export unlimited presets.
Macros: Up to 4 macros for each knob
MIDI I/O: IN, OUT, THRU - TRS 3.5mm (1/8"), MIDI USB
Power: 1 x USB Type C
Compatibility: Mac, Windows

Scope of delivery:

N32B Slim MIDI Controller

1 x USB C to USB A cable

1 x TRS to MIDI DIN5 Adapter

Notes: Offering optimum protection for transporting and storing your Flux synthesiser, this case of coated multiplex, with aluminium edge protection and two butterfly locks. Foam padding inside for protection and multiple accessory compartments contained within.

Notes: ***B-STOCK: Box opened, product in perfect working order***


Derived from the excellent Lyra-8, the Lyra-4 features a similar 'organismic' approach to synthesis. Four-voice non-linear architecture offers unique tones in a compact, portable format.

Supplier's Notes:
Introducing the revived version of LYRA-4 organismic synthesiser, the younger sister of the famous LYRA-8. "Organismic" means that LYRA uses some principles that lie in the base of living organisms. The way how LYRA's modules interacting between each other and the behaviour of the instrument resembles a live conversation. It's smaller and weighs less but is equally rugged in design, and still packs a lot of punch. This makes it easy to fit in a backpack and perfect for taking the LYRA sound on the road. And playing two LYRA-4s can actually sound very different than just one LYRA-8.

LYRA-4 is based on four generators, which will be referred to as voices. Their design is not like a traditional subtractive synthesis VCO. Instead of having a linear or logarithmic dependency on control voltage, they resemble the tone generators in old electric organs. Hence the use of the term "voices" instead of "VCOs". Lyra uses non-linearity a lot, and the voices are constructed in such a way that allows for non-linearity to express itself.

The voices are divided into two pairs (12, 34), creating tree-like structure.

The voices can function either in an electric organ mode or in an FM synthesis mode with each of the voices and its envelope acting as a separate FM operator. The voice's impact on FM synthesis will decrease along with the decay of its envelope.

LYRA-4 also has the next blocks:

The HYPER LFO is a complex low-frequency generator, whose waveform is synthesized from two simple LFOs by summation or multiplication of their frequencies. It also has a sync mode. The LFO can modulate the selected pairs of voices and the MOD DELAY.

The MOD DELAY consists of delay with feedback. The delay has a unique possibility of self-modulation where the output signal modulates the delay sample rate, creating cool effects.

The DISTORTION is last in the chain, after the delay. It enables the delay to also influence the distortion.

For all its experimental character, LYRA is a professional instrument. Its output dynamics and frequency response are balanced and ready for a live performance or studio recording without any additional processing.

Specifications

Max output voltage: 2 v 0-to-peak
Output connector: mono 6.3 mm TS jack
Output resistance: 10 KOhm
CV DELAY: unipolar, range of 0 to +5 volt
CV DELAY: 6.3 mm TS jack
CV VOICES: unipolar, range of 0 to +5 volt
CV VOICES connector: 6.3 mm TS jack
Power supply stabilised, +12 V, 0.2 A, centre positive
Power Consumption: 1.2 watt
Headphones resistance: 6-64 Ohm
Power supply stabilised, +12 V, 0.2 A, centre positive
Dimensions: 241 x 203 x 62 mm
Weight (without power supply and packaging): 1.2 kg

What's included:

LYRA-4 - 1 pc
Power supply - 1 pc

Notes: Incredible value all-rounder from Zoom, the L-6 combines recording, mixing and performance features, with 10 studio-quality audio tracks, effects, MIDI and real-time sampling.

Supplier's Notes:
Small Just Got Very Big

The LiveTrak L6 is Zomo's most compact and portable digital mixer / recorder. With 10-tracks of studio quality audio, effects, MIDI, and sound pads, it's perfect for bands, synth players, live streaming, and more.

Full Featured Mixer

Don't let its size fool you. The L6 is designed with big mixer capabilities; a full channel strip for each track including aux sends, pan, effects, and a 3-band mid-sweepable EQ.

Powerful Multi-Track Recording

The L6 records 10 discrete tracks plus the full stereo mix on microSD cards up to 2TB. Share the live mix, or transfer your stems to your favorite DAW for editing and mixing.

MIDI Connectivity for Synths and Keyboards

Connect, program, and sync the L6 to your outboard gear via the 3.5mm MIDI I/O, or to a computer via USB.

Map parameter controls such as volume, pan, and EQ to outboard gear
Trigger sound pads and scene switching
Tempo sync delay and echo

Features

10-channel ultra-Compact digital mixer
2 XLR/TRS Combo inputs + 4-Stereo inputs
12-track simultaneous recording
MIDI In/Out for mixer control and USB MIDI interface
3 Scene memory for storing mixer and tempo setting
32-bit float multi-track recording to micro SD card
5 Internal Send Effects
2 AUX send outputs
4 Assignable sound pads (sample player)
3-Band EQ with MID freq control for each channel
Headphone output + Master output
Eurorack compatible
12-in / 4-out Audio interface
4 AA battery power operation or USB power

Specs
Input and output channels
Inputs MIC/LINE (mono) 2
LINE (stereo) 4
Outputs
AUX SEND (mono): 2
MASTER (stereo): 1
MONITOR (stereo): 1

Inputs

MIC/LINE:
Connectors: 2 XLR/TRS combo jacks (XLR: 2 HOT, TRS: TIP HOT)
Input gain: Adjustment unnecessary (dual A/D converter circuits used)
Input impedance:XLR: 3.8 kO or more, TRS: 39 kO or more
Maximum input level XLR: +4 dBu, TRS: +24 dBu
Phantom power: +48 V, Channel total of 10 mA or less

LINE

Connectors: 8 TS phone jacks (unbalanced)
Input impedance: 10 kO
Maximum input level: +9 dBu

Outputs

AUX SEND
Connectors: 2 TRS phone jacks (impedance balanced)
Maximum output level: +9.5 dBu
Output impedance: 147 O

MASTER
Connectors: 2 TRS phone jacks (balanced)
Maximum output level: +15 dBu
Output impedance: 147 O

MONITOR
Connector: TRS phone jack
Maximum output level: 50 mW + 50 mW (63 O load)
Output impedance: 14.7 O

Buses

MASTER: 1
AUX SEND: 2
SEND EFX: 1

Channel strip

3 BAND EQ:
HIGH: 10 kHz, +/-15 dB, shelving
MID: 100 Hz - 8 kHz, +/-15 dB, peaking
LOW: 100 Hz, +/-15 dB, shelving

Level meters: 6 segments
Send effects: 5 types

Recorder

Maximum simultaneous recording tracks: 12
Maximum simultaneous playback tracks: 2
Recording formats: 48 kHz, 32-bit float, mono/stereo WAV
Recording media: microSDHC memory cards (Class 10 or higher), microSDXC memory cards (Class 10 or higher)

Audio interface

Input and output channels: Input: 12 channels, Output: 4 channels
Sampling frequency: 48 kHz
Bit depth: 32-bit float / 24-bit
Interface: USB 2.0

Card reader: Mass storage class USB 2.0 High Speed
Sampling frequency: 48 kHz
Frequency response: 20 Hz - 20 kHz / -1.0 dB
Equivalent input noise: -120 dBu or less (IHF-A) at 150O input

Power
4 AA batteries - Alkaline, Lithium, or Rechargeable NiMH
AC adapter: ZOOM AD-17 : DC 5V/1A
USB bus power is supported.

Estimated continuous recording time using batteries
Alkaline batteries: About 3 hours
NiMH batteries (1900 mAh): About 3.5 hours
Lithium batteries: About 7 hours

12-track recording, phantom power off, headphones used (63O load), no MASTER output connections
These values are approximate.
Continuous battery operation times were determined using in-house testing methods.
They will vary greatly according to use conditions.

Power consumption 5 W maximum
Dimensions: 223 mm (W) × 114 mm (D) × 46.5 mm (H)
Weight (main unit only): 526 g
Weight (including batteries): 618 g
Note: 0 dBu = 0.775 Vrms

Notes: ***B-STOCK: Box opened, product in perfect working order***


Pro-Ject's updated VC-E2 is a compact alternative to the premium VC-S3 record cleaner. A new magnetic clamp seals the label and holds the record for cleaning with Pro-Ject's Wash It 2 cleaning fluid.

Supplier's Notes:
The new VC-E2 is a new compact record cleaning machine with completely new, superior features. Vinyl records need a specific maintenance. The dry brush cleaning before playing the record is good to roughly remove dust. To effectively clean the grooves, you need to wet clean the record.

To achieve the perfect cleaning, we also need a suitable cleaning fluid. Alcoholic cleaning fluids can destroy musical micro information of the grooves. That's the reason Pro-Ject designed a new eco-friendly non-alcoholic cleaning fluid called "Wash it 2". The new Wash it 2 is a pre-mixed liquid, so you don't have to dilute the concentrate yourself anymore. This avoids accidentally
using unsuitable tap water for mixing. With Wash it 2 you can optimize the cleaning performance again. The VC-E2 is very powerful and cleans records completely in one to two revolutions.

Made in Europe!

The new magnetic clamp not only seals the record label from cleaning fluid to avoid damage on the label, it also speeds up the whole cleaning process. Place your record on the machine, put on the clamp, and you are ready to go - no more tedious screwing of the clamp anymore. The robust, easy to use metal arm is mechanically stable and focuses all suction power directly onto the record surface. Paired with new self-adhesive arm strip, your records get cleaned perfectly. The internal container (0,5 liters) collects used fluid and is effortlessly easy to empty. When using Wash it 2 cleaning solution, the fluid will also evaporate in the container, meaning the container will need to be emptied rarely. If you have a big record collection, you should have a look on Pro- premium VC-S3. The new VC-E2 is made in Europe with high quality materials and an excellent build-quality. With many practical features and excellent mechanical operation, the VC-E2 effectively combines industrial design appeal with an easy solution to great sound from your vinyl records.

Technical Specifications

Cleaning speed: 30 RPM

Included accessories:

Brush
Vacuum Arm
Self-Adhesive Arm Strip
Magnetic clamp
Wash it 2 (100ml)
Power cable

Power connection: 230/240 Volt
Power consumption: 230V/800W
Dimensions: 310 x 266 x 210 mm (W x H x D)
Weight: 6,5kg

Please Note: Pro-Ject Record Cleaning Machines are not intended for commercial use. They are home-use products.

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


One of our favourite DJ turntables, courtesy of German DJ brand Reloop. Classic Technics-inspired design updated with nice features like reverse mode, 78rpm setting and second start/stop button.

Supplier notes:
With the RP-7000 MK2, Reloop has built a turntable that caters to the high demands of professional DJs and modern nightclubs. With its powerful direct drive motor and rugged construction we were able to develop a sturdy and indestructible turntable that can take on harsh everyday life with ease.

Sturdy Casing Construction:

By using a combination of metal, rubber and synthetic materials, the RP-7000 MK2's housing is more reinforced and heavy than ever before. This results in a turntable that is extremely resistant to vibrations that can be caused by heavy bass sounds in DJ booths and its shock-absorbing feet help to further improve isolation. The surface is coated with a scratch-resistant high-quality deep black or classic silver metallic finish.

Balanced S-Shaped Tone Arm with Upgraded Tone Arm Base:

The RP-7000 MK2 features a statically balanced S-shaped tone arm with hydraulic lift and anti-skating mechanism. The newly developed tone arm base provides improved stability and adjustable height/vertical tracking angle (VTA). The low-resonance tone arm comes with a universal connection for pick-up cartridge systems (SME).

Dual Start/Stop Buttons, Precise Motor Control and Reverse Function:

As well as the above technical innovations, the RP-7000 MK2 is equipped with a few functions that will make any DJ's life much easier. The newly developed aluminium LED target light is freely moveable to help you find the stylus position in dark surroundings. The target light is also removable and easily exchanged. An additional start/stop button has also been integrated to facilitate a vertical setup (battle position) and by using the buttons on the RP-7000 MK2's top panel, you can switch between the three motor speeds (33 1/3, 45 & 78 rpm). Dedicated buttons for forward and reverse mode allow for further creativity in your mix.

High-Resolution Pitch Section with Digital Fader:

Using the high-resolution pitch fader you can adjust the platter speed in the classic turntable pitch range +/-8%. However, the RP-7000 MK2 is also cable of a wider, DJ-friendly +/- 16% pitch range and a massive +/-50% ultra-pitch. This allows for increased creativity when modulating the playing record's tone. If quartz lock is active, the platter speed will remain unaffected by the fader position and will spin at zero pitch (0%).

High-Quality Connections and Integrated Phono Pre-Amp:

Thanks to the recessed rear connection panel, the RP-7000 MK2 can easily be mounted in a flight case and seamlessly positioned next to other DJ gear. The switchable integrated phono pre-amp makes it is possible to use the gold-plated RCA connectors for both phono and line output signals. An optional ground terminal offers additional protection in club environments. All cable connections (RCA/mains) are detachable and easy to exchange, which also helps with transport and storage.

Powerful Motor with Extensive Adjustment Possibilities:

The fine-tuned, quartz-driven motor with digital pitch correction operates at a starting torque of 2.8kg/cm, which can be adjusted up to a maximum of 4.5kg/cm. This makes it an extremely smooth running turntable with wow and flutter of just 0.01% WRMS*. Furthermore, the turntable break speed (platter stop) can be adjusted from 0.2 - 6 seconds and the precision-machined, heavy die-cast aluminium platter is lined with vibration reducing rubber to eliminate unwanted vibrations and resonance.

Notes: Bartender is the centerpiece of the mixer system. Four stereo channels, with two stereo aux send and two stereo returns. Each channel can be used in a mono mode where both channels are mixed. If you want to do eight channels of mono, you can put the channels in stereo mode (I know it feels backwards) and then use the pan control to control the crossfade between each channel, and then take the mono output. There is a built in cueing system so you can monitor channels in your headphones and control the blend with the main output. You can expand a Bartender with both a Barback and/or another Bartender. When connecting two Bartenders, the main level control on the 'expander' Bartender acts as a group control.

Notes: Serious versatility from AJH here. Based on the circuits from the Oberheim Matrix 12, the Matrix VCF offers a whopping 16 different fully analogue filter modes, each with two different resonance models. All bases covered.

Supplier's Notes:
Presenting the new AJHSynth Matrix VCF - this may well be the most versatile Eurorack VCF ever.

This amazing multimode filter and VCA offers sixteen different filter types, and two different resonance models on each, totalling an incredible thirty two assorted resonant filters to choose from. AJH Synth have also included manual and CV control of filter type selection, along with 16 LED's that give a clear visual indication of which filter type is currently selected.

The filter core circuitry is based on that of the rare and highly sought after Oberheim Matrix 12 synthesiser, and of course has an all analogue signal path. The Matrix 12 VCF originally offered fifteen filter types, however AJH Synth have expanded this to 16 with the addition of AP4, a full four pole all pass phaser mode.

AJH Synth have added a unique P-Vox resonance distortion and overdrive circuit that changes the character of the resonance completely, and can force all of the filter modes into self oscillation. This effectively doubles the filter variants and hugely broadens what is already a very impressive sound pallet.

Other features include an inbuilt VCA with Input and Output Level controls, a Peak level LED, CV control of resonance, and of course the legendary AJHSynth build quality.

The Matrix VCF in depth

After two years of development AJH Synth have finally released what they consider to be the most versatile Eurorack VCF & VCA ever. Like many other AJHSynth modules it uses the very best vintage analogue circuitry as the starting point for the design, and in this case, the filter was chosen from the rare and very desirable Oberheim Matrix 12 synthesiser. AJH Synth expanded this from the original fifteen filter compliment to sixteen distinct filter types by adding in a really useful four pole phaser!

So, behind the compact 14hp front panel lies sixteen distinct filter types, including all of the favourites: Low Pass filters with a choice of one, two, three or four poles, Band Pass filtering with two or four poles, High Pass filtering with one, two or three pole options, along with Notch filtering and four complex, combination filter types. Finally, a four stage phaser with two types of emphasis that can be forced into tuneful self-oscillation!

However, this is far from the end of the story. AJH Synth decided to use their design expertise to add in some crazy resonance distortion circuitry, that could be switched on from the front panel. This was inspired by the filter from the Soviet Polivoks synthesiser, but again the implementation used here is considerably changed, improved, and best of all this can be applied to all filter types! This completely changes the filter character when engaged, and it forces all of the filters into self-oscillation at higher resonance settings. Better still, the oscillation waveforms are more harmonically rich than the usual sine waves - everything from gloriously fat to screaming and angry! Best of all, this takes the number of different filters up to a massive thirty two variations!

AJH Synth put a lot of thought into the ergonomics and how to select the individual filter type. Filter type can be changed either with the front panel Mode knob, or by using a control voltage patched to the MODE CV input. The selected filter mode is displayed by the LED next to the filter in use. This is also very helpful when using a step sequencer to change filter mode as it gives a real time display of the filter chosen as you take the step CV voltage up or down, while setting up each individual step.

Lastly, AJH Synth have also included a VCA hard-wired to the output - simply patch an envelope or an LFO to the VCA input, connect a VCO to the audio input and you have a synth voice (with a choice from 32 different filters!) using only three modules!

Thirty two Eurorack VCF's and a VCA would most certainly take up a lot of rack space - AJH Synth have got all of this into 14hp and managed to have a really finger-friendly user interface, without it feeling cramped.


Sixteen distinct filter modes to choose from

Here's a list of the different filter modes that are available:
1 - Four Pole Band Pass
2 - Three Pole High Pass combined with One Pole Low Pass
3 - Three Pole All Pass combined with One Pole Low Pass
4 - Two Pole Notch combined with One Pole Low Pass
5 - Two Pole Low Pass
6 - Four Pole All Pass (Phaser)
7 - Four Pole Low Pass
8 - Two Pole Band Pass
9 - Two Pole High Pass combined with One Pole Low Pass
10 - Three Pole High Pass
11 - Three Pole All Pass
12 - Two Pole Notch
13 - One Pole Low Pass
14 - Two Pole High Pass
15 - Three Pole Low Pass
16 - One Pole High Pass

All of the above filter types can be further altered by switching in P-Vox mode, this doubles the list up to thirty two different filter variants!

P-VOX MODE

Transforming the resonant character of every filter type

This magical switch completely transforms the resonance of the filter core by overdriving it in a similar fashion to the filter from the Soviet Polivoks synthesiser, which was renowned for it's powerful, aggressive character.
In common with the Oberheim Matrix 12 VCF, some of the sixteen filter types will not normally go into self-oscillation, however when you switch on P-Vox mode all sixteen filter types can be forced into self-oscillation at higher resonance settings. But that isn't the only change, the self-oscillation waveform is not the usual sine waveform, it is a rather more interesting and harmonically rich waveform that varies according to the filter type chosen - generally Low Pass modes produce the nearest to regular sine waves, whereas other filter types can produce very much more complex waveforms as can be seen in the diagrams below. It does not require any audio input for this, it can be a stand alone oscillator. Most of the filter types will track 1V/Oct reasonably well over a three to five octave range, so it can be used as a VCO with a few interesting waveshapes!

Of course, P-Vox mode isn't just useful for self-oscillation, it adds lots of character to any audio signal as P-Vox resonance is switched in.

Module Width: 14hp
Module Depth: 29mm (Including power lead)
Current Usage: 56mA Positive, 36mA Negative

Notes: Inspired by 'fill' effects found on old-school drum machines, the DeFeel module is unique approach to manipulating sequences, designed to 'degenerate the monotony' of rhythmic patterns, creating variations in real time.

Supplier's Notes:
With DeFeel, Enjoy Electronics have redesigned and applied the Fill concept to make it usable in the world of modular synthesisers.

This device is designed to break the chain between the sequencer and everything that comes after it, allowing you to intervene at the right time and create unique variations.

A modular device that's not going to generate anything, but is created to degenerate the monotony.

DeFeel isn't about complex button presses or cryptic menus. Here, creativity reigns supreme. Design your rhythmic patterns with an intuitive touch. Simple lines and vectors come to life on the multitouch display, allowing you to experiment and craft unique sequences with remarkable ease.

DeFeel, offers musicians and performers a powerful and versatile tool to enrich their performances and compositions. With its intuitive programming, sleek design, and innovative translucent panel, DeFeel stands out as a unique device poised to revolutionize the way modular synthesizers are used and perceived.

Notes: Simple but effective approach to signal routing here from Jolin Rosa. The Morpher is a four-in/four-out crossfader, scanner and switcher, allowing you to shape, route and manipulate any signal with ease.

Supplier's Notes:
ROSA is a multi-mode crossfader, scanner, and switcher that allows seamless morphing between up to four inputs and outputs. With its three operating modes (Scan, Wave, and Pass), you can easily shape and route signals to fit any patch.

A quick overview:

Scan Mode: Morph between up to four inputs with adjustable curves using the KNEE control.
Wave Mode: Independently control the four VCAs for complex dynamic changes.
Pass Mode: Route a single input (or mix multiple inputs) to up to four outputs, perfect for quadraphonic setups or parallel processing.
Infinite Analogue Potentiometer: For smooth, continuous transitions.
Global SHUT Control: CV-controlled mute for immediate silence.

Notes: This module is designed to generate a multitude of aggressive, punchy, violent and absolutely bonkers variations of the original unprocessed sound.

Transform any clean sound into a distorted monster, using 2x drive stages per channel with a wide range of distortion flavors ranging from subtle saturation to extreme fuzz.

Process two channels at the same time and create balanced and smooth or raw and rough transitions between them.

Allow the kick drum and bass line to coexist effectively in the mix, avoiding conflicts in the low-frequency range with env. follower and sidechain.

Shape any sound with 3 band adaptable EQ.

Function as a signal generator as well, this module can be pushed into self-oscillation at any frequency even with no input.

Add sub-octave tones to melodies and bass lines.

Preserve the dynamic range and clarity of the sound through parallel processing, ensuring that the original characteristics are not lost even when applying heavy distortion.

Add character, flexibility and madness to any source that sparks your imagination.

Notes: This module is designed to generate a multitude of aggressive, punchy, violent and absolutely bonkers variations of the original unprocessed sound.



Transform any clean sound into a distorted monster, using 2x drive stages per channel with a wide range of distortion flavors ranging from subtle saturation to extreme fuzz.



Process two channels at the same time and create balanced and smooth or raw and rough transitions between them.



Allow the kick drum and bass line to coexist effectively in the mix, avoiding conflicts in the low-frequency range with env. follower and sidechain.

Shape any sound with 3 band adaptable EQ.

Function as a signal generator as well, this module can be pushed into self-oscillation at any frequency even with no input.

Add sub-octave tones to melodies and bass lines.



Preserve the dynamic range and clarity of the sound through parallel processing, ensuring that the original characteristics are not lost even when applying heavy distortion.



Add character, flexibility and madness to any source that sparks your imagination.

Notes: Analogue discrete Synthvoice with two VCOs, three SUB-VCOs, Wavefolder, Noise, Ring Modulator, two loopable ADRS, two LFOs/VCOs, MIXER, 24db Lowpass VCF, VCAOur new Eurorack flagship hits stores this summer. Very compact (pre-patched) discrete synth voice module with excellent analogue technology for endless soundscapes at a reasonable price.

Two discrete VCOs with highly stable tracking

Three analogue Suboscillators (3/4-1/2-1/4 with SQUARE, SAW, TRI) + Gravity Mix -Sync

Wavefolder (VCO 1 TRI WAVE)

White Noise

XOR Ringmodulator

Discrete VCA

24dB LP VCF with overdrive

Dual analogue LFO (one also usable as VCO) with incredible range and keytracking -Two superfast and punchy analog ADSR sections with LOOP function and four TRG outputs (End of ATT, End of DEC)

Mixer section with Master level -Glide presets and huge Patchfield to communicate with other Eurorack Modules.

Screwed metal shaft potentiometer

Rackspace: 36TE
Depth: 25mm

Notes: A sequencer and a filter-bank got together...

...And a love child was born !

Introducing NIGHT RIDER, from RYK Modular

Four multi model filters with stereo capability, combined with a six-stage four-channel modulation sequencer.

Finally a filter bank that unifies the control of multiple parameters, enabling a spaghetti-free approach to formant animation fun.

NIGHT RIDER cleverly turns the dials to where you want them, when you want, via it's unique modulation sequencer

Create dreamy swooshing 70's phaser filter sweeps
Phenomenal for phoneme vocal formant rasps and wheezes
Plucking great for strumming Karplus Strong twangs, and pinging filter pings!
Or, turn your silk into shredded cabbage, with the built in bad-ass clipping-saturator

Technical specifications

Frequency range - from rumble to wispy
Resonance/Feedback range - from tame to insane
Individual Filter levels - silent to beyond 11, for serious saturation-clipped sonic destruction

Features:

Four filter blocks, with multiple models , including:
6db BPF [ pingable ]
12db BPF [ pingable ]
12db variable width BPF
Comb Filter for Karplus Strom [ pluckable & flanger vibes ]
All Pass filter [ crazy Phaser vibes ]

Dual Input and Stereo output, with Pan control for each filter in the stereo field. Input can
be Mono [ CH1 - 1,2,3,4 ] or Dual [ CH1-1,2 CH2 - 3,4 ]
Modulation Sequencer capable of being clocked, scanned, and interpolated
CV inputs for sequencer Interpolated scanning, 1V/Oct frequency offset, Slew amount,
Resonance amount, Clock or MIDI clock input for sequence animation, MIDI CC
Memory slots for storing and retrieving Filter and animation setups, and retrieving preset formant, and chord based Filter setups

Vital stats:

Width 16 HP
Depth 25mm

52mA +12V
9mA -12V
0mA 5V

Notes: Clock generation meets waveform manipulation in this analogue harmonic oscillator. Combine with the Tobinski sequencer and/or interpolating scanner modules for the best creative results.

Supplier's Notes:
The Harmonic Timing Generator is a versatile Eurorack module that combines advanced clock generation with harmonic waveform manipulation. Combined with the Tobinski Sequencer, the module is a great tool for rhythmic and sonic creativity in the modular system.

As a reference clock generator, the Harmonic Timing Generator produces a base frequency with analogue multipliers (x1 to x8) to generate complex timing signals. Three selectors provide manual or voltage-controlled frequency switching, offering flexibility for intricate sequencing patterns. An LFO mode enables slower clocking rates, ideal for driving sequencers or generating modulation sources.

When used with the Interpolating Scanner, the sawtooth outputs of the Harmonic Timing Generator are transformed into sine waves. This allows the module to function as a harmonic oscillator at audio rates or as a versatile modulation source in LFO mode. Its dual functionality ensures that it can adapt to a wide range of patching needs, from rhythm generation to rich harmonic exploration.

The Harmonic Timing Generator is a versatile and creative tool, offering rhythmic and harmonic possibilities that complement any modular synthesizer setup. Its integration with other Tobinski modules ensures a cohesive and expansive sonic palette.

Power consumption: 235mA at +12V and 176mA at -12V and 20mA at +5V

Depth: 27mm

18 HP

Notes: Suitable for guitar, synths, drum machines and more, the updated Godeater refines the boutique saturation/distortion pedal, offering more precise control over low frequencies. New filter-keyed sidechain, advanced routing and MIDI integration add major flexibility.

Supplier's Notes:
The new Godeater+ is the successor to the successful Godeater pedal from Indian manufacturer Animal Factory.

The Godeater was primarily designed for electric basses and saturates the sound in the lower frequencies. However, it is not limited to bass guitars. The pedal can also be used with synthesizers or guitars. The pedal can also be interesting in combination with drum computers. The main aim of the Godeater+ is to create a pedal that allows you to create a distorted sound without losing the low frequencies.

Notes: Empress have brought back the most sought after Parametric EQ pedal with groundbreaking updates.

More Control

Whether you're trying to cut through a mix or fix a feedback issue, you need precision! The ParaEq MKII offers the most control of any pedal EQ on the market.

More Power

The ParaEq MKII pedals operates internally at 27V, providing clean headroom without unwanted clipping.

More Purity

We're able to offer the most control without degradation to the tone due to minimal circuit topology0 the opposite of graphic EQs.

Which ParaEq Do You Need?

The original ParaEq has been loved and trusted by musicians on a variety of instruments for over a decade. Both the ParaEq MKII and the ParaEq MKII Deluxe feature a low-noise, transparent signal path that is extremely versatile.

With three fully parametric bands, you can simultaneously achieve broad tonal shaping and precise fine-tuning to sculpt your perfect sound.

The ParaEQ MKII Deluxe will appeal to players who:

Need high-pass and low-pass filters for precision work at the frequency extremes
Want the glorious sound of Baxandall filters for sparkling high end or extra weight in the low end
Want to be prepared for any EQ situation

Why Parametric over Graphic EQ?

Graphic equalizers provide a convenient visual sense of the EQ curve. However, there is a tradeoff in transparency and precision.

The ParaEq MKII Deluxe excels in precision and transparency compared to a standard 7-band graphic EQ pedal. When both are set to provide a boost, the ParaEq MKII Deluxe offers a much more focused adjustment, affecting only the targeted frequencies. In contrast, the graphic EQ alters a broader range of the frequency spectrum. Moreover, while the ParaEq keeps the rest of the signal unchanged, the graphic EQ can unintentionally reduce other parts of the signal. This makes the ParaEq MKII Deluxe a more transparent and accurate tool for shaping your sound.

This combination of transparency and precision is why recording studio control rooms are dominated by parametric equalizers, and why they're a great choice for creative and corrective EQ on your pedalboard.

Specifications

Input Impedance: 1MO
Output Impedance: 100O
Frequency Response (-3dB): 22Hz - 25kHz
Total Harmonic Distortion: < 0.05%
Noise: > 107dB
Headroom: +30dBu
Input Voltage: 9VDC Centre-Negative
Required Current: 300mA
Power Input Connector: 2.1mm Barrel Connector
Height (Enclosure Only): 1.5"
Height (Including Controls): 2.5"
Length: 4.8"
Width: 2.6"
Weight: 1 lb

Notes: An original creative take on delays, looping, reverb and modulation, the Technician combines various digital programs to create a hugely versatile all-round audio tweaking toolbox.

Supplier's Notes:
Delay modes

Digital

Starting as a crisp digital delay, this mode, when paired with the tap footswitch, covers a lot of ground for your delay needs. The "Red" modulator lets you adjust the dampening of the delay, making the repeats either brighter (emulating towards a tape or HIFI sound) or darker

Reverse

Instead of reading the delay buffer in a forward direction like the "Digital" delay we read the buffer backwards creating unique sound possibilities. You can further modify this sound with the "Red" modulator to adjust the dampening of the repeats to grow brighter or darker.

Granular

Takes the delay buffer and chops it up into "Grains" and then plays those grains back. The size of the grains, direction (forward/reverse), the speed (pitch) and location in the buffer is all randomized so every time you experience this mode it will be a unique exploration into granular synthesis. The "Red" modulator allows you to adjust the max size of the randomized "size" of the grains and the amount of grains from 1-5.

Re-sample

What if you want a more complex soundscape like other instruments are playing with you? Re-sample accomplishes this by playing the delay buffer at different speeds which changes the pitch and timing of the delayed phrases creating a more complex musical expression of what you are playing. "Red" lets you adjust the mix of the octave down and the octave up.

Reverb modes

Hall

The least diffused of the reverb modes "Hall" allows you hear the reflective nature of the hallway your sound is in.

Plate

Emulating a classic plate reverb sound that is diffuse and reflective.

Chasm

An exploration into reverb design feedback networks that can allow for unnaturally large decay lengths.

Grim

Takes the "Chasm" mode and splits the output to a parallel octave down so you get the normal output + the octave down for a deep rich soundscape.

Looper modes

Gives you latching control over the rec/dub of your looper.

Momentary

Only rec/dub while holding the rec/dub switch.

Quantise

Works like the latching but will trim your loop to a division of the existing delay time.

MOD ONE and MOD TWO allow you adjust the following modulators

Modulators

Delay

Vibrato - an asymmetrical modulation of the reverbs pre-delay to create sonically pleasing movement in your reverb.
Auto-Filter - takes control of the "Filter" DSP block and modulates it with an LFO. Adjust the "Resonance" of the "Filter" block to get a more dramatic effect.
Shimmer - Adds an octave feedback path in each reverb mode and can be octave down or octave up.
Dampening - adjust the LPF and HPF of the reverb feedback path drastically changing the tone and how the reverb reacts to input.

Reverb

Vibrato - an asymmetrical modulation of the reverbs pre-delay to create sonically pleasing movement in your reverb.
Auto-Filter - takes control of the "Filter" DSP block and modulates it with an LFO. Adjust the "Resonance" of the "Filter" block to get a more dramatic effect.
Shimmer - Adds an octave feedback path in each reverb mode and can be octave down or octave up.
Dampening - adjust the LPF and HPF of the reverb feedback path drastically changing the tone and how the reverb reacts to input.

Looper

Clock: fine detail adjustment of the speed and direction of the clock.
Quantized Clock: Quantized adjustment of the speed and direction of the clock locked to octave intervals.
Loop Start: Adjust the starting point of the loop.
Loop End: Adjust where the loop will end.

MIDI: 3.5MM IN/OUT
USB: USB-C
Expression: TRS input

Controls

MIX (mod one)- The mix of the Reverb DSP block
DECAY (mod two)- The time it takes for your instruments reverberations to fade away, or die.
FEEDBACK (mod two)- How many repeats the delay will have
MIX (mod one)- The mix of the Delay DSP block
CLOCK (pre-delay)- Adjusts the "size" of the reverb DSP block
MIX (mod one)- The mix of the Looper DSP block
FREQUENCY (resonance)- Adjusts the Frequency of the Filter DSP block
TIME (dry mix)- Set the time of the Delay DSP block up to 2 sec

Modifiers

Reverb Mode (modulators)- Sets what Reverb Algorithm is active
Looper Mode (modulators)- Sets how you control the Looper DSP block
Tap Division (effect order)- Sets which tap division is active for the Delay DSP block. 1/2: Half note, 1/4: Quarter note, .1/8th: Dotted eighth note, 1/8th: Eighth note
Delay Mode (modulators)- Sets which Delay Algorithm is active

Input/Output: Stereo / mono - stereo / stereo - mono / parallel mono
Bypass: True Bypass / Tails
Power: 9v 400MA
Dimensions: 4.8 x 5.5
MIDI: Yes. 3.5mm Jack
USB: Yes
Jacks: Top Mounted Input And Output Jacks

Notes: Black Fountain Stereo Characterful Delay Building on the inimitable Black Fountain, a pedal that put OBNE on the map and for many a favourite always-on device, Black Fountain Stereo is much more than just turning things from mono into stereo. It truly expands Old Blood Noise Endeavors' highly regarded 'oil-can delay' pedal right into a multi-tool.

With a wider control set that's complete with added sonic options, a lower noise floor, dual delay lines that play together in a multitude of ways, presets, MIDI and expression control over everything, Black Fountain Stereo combines a sonic powerhouse of creative delay tones and into a pedalboard friendly package.

Black Fountain Stereo emulates the sound of a spinning oil-can delay. This is a warm, modulated and a little gritty type of tone that's perfect for chorusing, doubling, slap back and long rhythmic delays alike. You choose the amount and rate of modulation, the tone and grit of the core voice, the two delay times and their feedback. Plus, to top it off the mono/stereo voicing of it all can be set exactly as you like and everything can be saved into presets, for easy recall.

The Rate and Depth controls sets the amount of modulation and speed, Tone shapes the warmth of the repeats, while Grit sets the amount of drive in the repeats. To help maintain the clarity of your tone or for more special effects, you can set the mix of volume of either the Dry and/or Wet levels. Space defines the mono delay mode or stereo width and adds diffusion past the noon position.

Separate controls are available for setting the Left and Right Delay Time as well as being able to choose between six subdivisions for each side when holding the Tap footswitch. That little Tap switch (surprise) helps you set the delay repeats in time with your tempo, while holding it down will give for infinite feedback. Optionally, it can also be used as a preset switcher.

Product Height (cm): 6.9
Product Width (cm): 10.8
Product Depth (cm): 12.6
Product Weight (kg): 0.454

Box Height (cm): 7.06
Box Width (cm): 11.43
Box Depth: 12.7cm
Boxed Weight (kg): 0.596kg

Notes: Black Fountain Stereo Characterful Delay Building on the inimitable Black Fountain, a pedal that put OBNE on the map and for many a favourite always-on device, Black Fountain Stereo is much more than just turning things from mono into stereo. It truly expands Old Blood Noise Endeavors' highly regarded 'oil-can delay' pedal right into a multi-tool.

With a wider control set that's complete with added sonic options, a lower noise floor, dual delay lines that play together in a multitude of ways, presets, MIDI and expression control over everything, Black Fountain Stereo combines a sonic powerhouse of creative delay tones and into a pedalboard friendly package.

Black Fountain Stereo emulates the sound of a spinning oil-can delay. This is a warm, modulated and a little gritty type of tone that's perfect for chorusing, doubling, slap back and long rhythmic delays alike. You choose the amount and rate of modulation, the tone and grit of the core voice, the two delay times and their feedback. Plus, to top it off the mono/stereo voicing of it all can be set exactly as you like and everything can be saved into presets, for easy recall.

The Rate and Depth controls sets the amount of modulation and speed, Tone shapes the warmth of the repeats, while Grit sets the amount of drive in the repeats. To help maintain the clarity of your tone or for more special effects, you can set the mix of volume of either the Dry and/or Wet levels. Space defines the mono delay mode or stereo width and adds diffusion past the noon position.

Separate controls are available for setting the Left and Right Delay Time as well as being able to choose between six subdivisions for each side when holding the Tap footswitch. That little Tap switch (surprise) helps you set the delay repeats in time with your tempo, while holding it down will give for infinite feedback. Optionally, it can also be used as a preset switcher.

Product Height (cm): 6.9
Product Width (cm): 10.8
Product Depth (cm): 12.6
Product Weight (kg): 0.454

Box Height (cm): 7.06
Box Width (cm): 11.43
Box Depth: 12.7cm
Boxed Weight (kg): 0.596kg