Studio Equipment charts

Notes: When the classic MS-20 analog synthesizer appeared in 1978, it had a trusted partner in the SQ-10 step sequencer. Now, after thirty years, the MS-20 has been reborn as the MS-20 mini, and the SQ-10 has evolved into the more modern SQ-1.

The SQ-1 is a compact step sequencer with 2 x 8 steps. It's wealth of connection jacks allows it to be connected to the MS-20 and a variety of other synthesizers. Vintage analog synths or the latest compact synths can be controlled from this single unit. You can also switch between a variety of synthesizer modes and use the step buttons to create performances overflowing with spontaneity, just as when using a volca unit.

Liberate yourself from the numerically-bound parameter editing that's typical on a DAW; you'll enjoy truly musical inspiration as you train your ears and concentrate on what your fingertips are doing. Don't miss the experience of music that's driven by your instinct.

Rather than the commonly used V/Oct standard, the CV design of the MS-20 always used the Hz/V standard that provides excellent pitch stability limiting the step sequencers that are able to correctly control the MS-20. As a descendant of the SQ-10, the SQ-1 supports the Hz/V standard, enabling it to perfectly control the MS-20 or MS-20 mini. It goes without saying the V/Oct standard is also supported, and the voltage level of the CV output and polarity of the GATE output can be specified as appropriate for the device you've connected. This versatility will enable you to control a wide variety of other synthesizers as well.

As a connector, the SQ-1 provides two CV/GATE OUT channels, the standard MIDI OUT and USB MIDI, littleBits out (to connect to the littleBits synth kit by littleBits Electronics Inc.), plus the SYNC IN/OUT channel that allows you to connect to the volca series and monotribe. Compact and complete with all the functions you need, the SQ-1 is the ideal hardware sequencer.

The SQ-1 provides two channels (A and B) of 8-step sequencer that can operate consecutively, or be used in a variety of other modes. For example, you can run A and B following each other to function as a 16-step sequencer, ignore the order and make the steps play randomly, or use A and B to control different parameters as they run in parallel. From simple sequences to complex changes, you can choose from a variety of modes to suit your needs.

The 2 x 8 step buttons can be used in the usual way to turn notes on/off, but you can also use the MODE button to switch their function, opening up powerful possibilities such as letting you "perform" the sequence itself, as on a volca unit.

"Active Step" lets you skip steps mid-way through a sequence, and "Step Jump" lets you instantly play just the step that you press, producing irregular rhythms or effects that are reminiscent of short loops. "Slide" produces an effect in which steps are connected smoothly; using this to control a synth bass is an easy way for anyone to generate an acid sound.

Packed with carefully selected functionality, the SQ-1 features a compact and very sturdy sheet-metal body. Placed beside the MS-20 series, you'll notice a sense of solidity that gives the impression they were manufactured in the same era. The unit can operate on two AA batteries or on USB bus power.

Sequence step resolution is selectable as quarter notes, eighth notes, or 16th notes.

You can specify the way in which the step knobs control the pitch. The knob values can specify the pitch directly, or they can specify the closest note in a major, minor, or chromatic scale.

Notes: The Korg Volca Keys is an ideal introductory synthesizer, with a simple, yet powerful polyphonic analog sound engine and loop sequencer.

The Volca Keys is a long awaited synthesizer that adds a new chapter to the long and storied history of Korg's analog synthesizers. This 27 key analog lead synth delivers unbelievably powerful sound in a compact body. Starting with a filter section that uses the circuitry of the legendary miniKORG700S (1974), it delivers astonishing sound that takes full advantage of Korg's half-century of know-how in circuit design.

With a simple structure that includes delay effect and a sequencer, it's also an ideal choice for a first analog synth. It offers the richly expressive sounds that are distinctive of analog, providing the enjoyment of simple yet deep sound-creation. The possibilities are endless; you can use the three oscillators to play chords, use them in unison with detune to produce solid lead lines, or apply ring modulation to create far-out metallic sounds.

The Voicing function makes it easy to specify how the three oscillators will be combined. Choose between poly, unison, octave, fifth, unison ring or poly ring simply by turning a dial. Easy for those taking thier first steps into synthesisers, the Volca's simple design makes it easy to obtain a wide variety of sounds.

Record phrases as you play them with the Volca Keys using the loop sequencer. With up to 16 steps, it's easy to create phrases as they come to mind. Use the overdub recording function to produce complex loops, with up to 8 sequence patterns able to be stored in internal memory. Craft your loops with the motion seqence function, apply time varying changes to your sound to enhance loops and add originality to your life performances.

Skip a step during sequence playback with active step, a function that creates effects similar to a short loop or unexpectedly irregular rhythms. This allows you to create a dynamic performance just as though you were performing the sequence itself. Flux function lets you play back the phrase without quantizing the steps, producing a loop with a distinctive sense of groove.

A useful self-tuning function constantly tunes the oscillators, so you never need to tune during a performance or wait for the pitch to stabilise after turning the power on.

Connect the Volca Keys with the rest of the Volca Series or a Monotribe using the sync jack. A MIDI in connector lets you synchronise with other devices, play the Volca from any MIDI keyboard and send note messages from your DAW.

The Volca Keys analogue loop synth has a compact size and a built-in speaker, easily playable anytime, anywhere. The ideal starter-synth.

http://www.youtube.com/watch?feature=player_embedded&v=7rbcYJ326EI

Notes: Peerless beats generated by solid analog drum sounds and an Electribe-style sequencer.

A vintage-style analog drum machine from Korg's recently announced Volca series. The Volca Beats includes a 16-step sequencer and 6 x editable analog parts including kick, snare, Hi/Lo toms and open & closed Hi-Hats designed to provide sounds reminiscent of classic 80s drum machines. It also has an additional PCM engine which is said to produce 4 x Lo-Fi percussion sounds including clap, claves, agogo and crash sounds.

There is one-knob-per-function parameter control for crafting each of the six analog sounds including click, snappy, pitch, decay and grain. The PCM sounds have control over pitch and speed. There is also a Level knob allowing volume adjustment of each part.

The 16-step LED-lit sequencer has 8 x memory locations for saving patterns. It includes a recordable stutter function for generating repeated triggers (or drum rolls) and delay effects, an active step feature for quickly adding or removing individual steps, and a step jump function that will instantly play any step. Notes can be entered live as the sequencer is running.

You can also wirelessly synchronise playback of all of the units in the Volca series with any iOS music app that support Korg's Wireless Sync-Start Technology (WIST) using their SyncKontrol iPhone app. This also allows control of the swing settings and fine control of the tempo (including tap tempo).

The Volca Beats is battery powered (with optional AC power) and includes a built-in speaker. It weighs in at only 372g with dimensions of 193 × 115 × 45 mm (W x D x H).

The Volca Beats editable controls include:

Kick (click, pitch, decay, level)
Snare (snappy, pitch, decay, level)
Hi/Lo toms (hi pitch, low pitch, decay, level)
Open/closed Hi-Hat (closed decay, open decay, level)
PCM sounds (pitch, speed, level)

Notes: A modern classic from Korg's affordable Volca range. Genuine analogue business with a built-in sequencer, ideal for acid house bass. A much more powerful synth than you might expect for the money.

Supplier notes:
The Korg Volca Bass is a powerful analog bass sound creation and an Electribe-inspired sequencer for the ultimate bass lines.

Although simple in structure, the analog sound engine has an unmistakable presence with subtle nuances that cannot be reproduced by a digital simulation; it's a great choice for acid house and many other styles of music. The step sequencer distilled from the Electribe is not only visually intuitive; it's also a powerful way to generate "free form" bass loops that will stimulate your inspiration.