Studio Equipment charts

Notes: Digital delay meets analogue filtering in this versatile little effects box. Single-tap delay with loop option and clever time multiplication, plus low-pass and high-pass filters.

Supplier's Notes:
Digital delay settings combined with analog sound shaping

SPECIFICATIONS:

Audio output: impedance balanced 1/4" TRS Jack

Audio input: impedance balanced 1/4" TRS Jack

DC Input: 12VDC, 500mA, centre positive, 2.1mm*5,5mm barrel type connector

Dimensions: 145mm x 130mm x 60mm

12VDC 1A power supply included.

Notes: An interesting creative take on delay from Lorre Mill. The Comb Room combines echo and filtering to create reverb and resonant feedback effects. Banana plug patch points allow you to tweak the signal routing.

Supplier's Notes:
Comb Room

The comb room effect combines a dual delay (room circuit) and a comb filter to make echo/reverb-type sounds and resonant feedback. The comb filter is in the feedback path of the delays. An envelope follower gives movement to either the comb filter or the room circuit. The comb resonance control in conjunction with the comb return control can create self oscillation. The preamp for the 1/4" input has selectable gain of 10x or 40x and a soft clipping characteristic. The comb and room circuits are both built around 1 bit delta-sigma converters. In the case of the delays, the analog to digital conversion is done in the PT2399 echo IC. The comb filter uses a simple and gritty A/D converter built of logic chips and op-amps. Which gives the filter a characteristic sound. Clock noise can be heard at lower frequency settings. Patching the room output to the return will bypass feedback through the filter, allowing all frequencies to echo.

Specs

Banana Patch Points
Banana CV inputs max voltage +/- 8v.
Banana Signal Inputs and Outputs are AC Coupled.

Audio Inputs
1/4" TS instrument input, gain of 2x or 12x
1/8" TRS line input summed to mono

Power Input
standard 12v DC 5.5mm x 2.1mm supplying at least 500mA of current

Audio Outputs
1/4" TS line or intstrument output (selected with push-pin switch)
1/8" TRS line output dual mono

Notes: Ultra-characterful 80s grit from this unique stereo delay. The BIM's 12-bit circuitry gives all that vintage colour with modern features like perfect stereo balance, MIDI control and tap tempo.

Supplier notes:
BIM is a 12-bit stereo delay unit inspired by some studio delay processors built in the early 80s. These monophonic processors have been renowned for the quality and musicality of their sound. The processing was mainly analog (companders, limiters, low-pass filters, feedback path,...), and the signal was converted to digital just for the delay section, using 12-bit AD/DA converters and some RAM memory chips.

The advantage of this technology is particularly obvious when the sound is feedbacked many times through the whole analog and 12-bit circuitry. You'll hear a sweet degradation and dark damping that the 100% digital delay boxes can't offer. BIM was designed with the purpose of creating a unique, modern and versatile effects processor based on this 80's technology.

The sound of an old 12-bit digital delay has been mixed with modern features such as stereo processing, extra FXs, many user presets, MIDI control, tap tempo, compact size- therefore BIM is the best of both worlds!

BIM is the perfect companion for the musician, producer, sound engineer or live performer who is looking for a unique, warm and musical delay processor.

Notes: Erica Synths Acidbox III brings you the core of the famous Polivoks VCF in stereo version with a unique audio signal overdrive circuit, built in LFO and envelope follower in a compact, full aluminium case.

The Acidbox III has adjustable input gain, therefore it works with various sound sources - guitars, units with line level signals (synthesizers, grooveboxes, etc.) and modular synths. Configurable control input allows you to connect a bypass footswitch, expression pedal, external cut-off control voltage source and LFO synchronization trigger. This makes the Acidbox an ideal companion in almost every production or live performance setup.

Notes: Beautiful combo of vintage tech and modern features from Benidub's boutique analogue phaser unit. Six-stage stereo processing with real-time switching to 12-stage mono mode. Excellent playability with large controls.

Supplier's Notes:
Old school mojo with a modern twist on versatility and sound quality
PHASE is an analogue optical phaser, featuring 12-stage in mono and 6-stage when used in stereo. You can switch between the two modes with the "Mode Select" control any time. We made it completely clickless, allowing you to flawlessly switch mode during your set! This unique control provides even more playability and a wide range of phaser tones.

100% analogue audio path for subtle-to-extreme true phasing colours and tones

Unlike many other phasers in the market, designed after guitar-frequencies needs, Benidub's PHASE has been built with a "studio" oriented design in mind, making it the best phaser for either producers and musician. From studio-standard headroom to balanced connections, everything is designed to improve sound quality while granting a smooth and precise excursion along a wide frequency spectrum.

Features

100% Analogue
As any other BENIDUB device, Phase is precisely built with high quality components for a complex and organic sound. The optical-based design not only ensures the best signal/noise ratio for a phaser circuit but also provides the iconic old-school timbre we all love.

Versatile Routing
PHASE can be used as a 12-stage mono or a 6-stage stereo phaser. We designed it as a playable feature, allowing you to switch between the two modes with the Mode Select, clickless control. Not just a "setting", but a tool to build new phasing effect possibilities.

Performance Oriented Design In A Sturdy Case
While designing PHASE we kept our easy-to-use, performance oriented philosophy. PHASE comes in a tank-built enclosures with every control you'll ever need on board, making it an extremely playful stompbox.

Specifications
1. Input L:

1/4" Balanced or Unbalanced jack. The "main" mono input of the unit.

2. Bypass:

Turns off the out of phase signal, thereby stopping the phaser effect.

3.LFO Depth:

Sets the amount of modulation.

4.Input:

In INSERT mode, you got the usual 50/50 dry signal. In AUX mode, you got the full wet signal.

5. Mode Select:

On MONO you get 12 stages. On STEREO you get 6-stages per channel. The stereo mode can be used with a mono input to generate a mono-to-stereo output.


6. Power Input:

12VDC, 500mA, center positive, 2.1mm*5.5mm barrel connector.

7.LFO Mode:

In LINEAR mode, all the 12 (6+6) stages will receive the same modulation. In MIRRORED mode, the first batch of stages modulation will be inverted.

8. LFO Rate:

Sets the modulation speed.

9. Centre frequency:

Sets the frequency that the phaser will revolve around. The Centre Frequency determines where the middle of the comb-filter will be on the spectrum.

10. Feedback:

The feedback knob controls the amount of phase-shifted signal that gets fed back to the phase-shifting circuit.

Notes: The Ar Merc'het Brao pedal is comprised of two filters and two overdrive sections.

The filters are resonant with a slope of -12dB. A switch allows to switch each filter from LowPass to HighPass. The filter cut-offs are voltage controlled thanks to dedicated CV inputs. Additionally, the Ar Merc'het Brao features global controls for cut-off and resonance.

It can be used with a stereo signal or with two mono signals. The module is modular as well as guitar friendly.

Both overdrive sections offer the classic and well known TouellSkouarn distortion sound.

Notes: You've heard of parametric EQ, now meet the paranormal filter. Filter on steroids with experimental six-band EQ, delay and loads of LFO modulation. A powerful, creative take on a filter box.

Supplier's Notes:
Dementor Paranormal Filter is a powerful analogue filter with infinitive of option to modulate the sound, it's perfect to create field soundlandscape and introduce in the dark side of the sound with noise and harmonics feedback sounds.

The Dementor is a unique filter, EQ and delay that takes your signals and makes sure to add spice and character to your sound.

You send one or two signals through the machine by using the two independent signal inputs with level control. The special filter features cutoff and resonance control is LFO controlled - in fact, it's three LFOs for cut-off, resonance and time modulation. You also get an experimental six-band EQ called Nuances (not a usual EQ!) with level control and feedback. The echo/delay, is also LFO controlled.

Dimensions: 20 × 30 × 10 cm

Notes: ***B-STOCK: Box opened, product in perfect working order***


Gorgeous analogue goodness in this all-rounder, featuring overdrive, filter, envelope, LFO and a nice retro spring reverb among others processing options. Tons of character.

Supplier's notes:
Today's digital effects and plug-ins can create almost perfect room simulations. However, when it comes to characteristic and charismatic reverb, analogue effect-processors are yet to beat. The reverberating sound of a spring is so lively and unique that its sound is almost impossible to recreate in the digital domain. In addition to this, Retroverb Lancet is not just a spring reverberation system - it is an analogue multi-effects-processor. It offers overdrive, filtering, VCA, envelope and LFO to manipulate the spring sound and create different sounds like auto-wah, tremolo, distortion, delay, gater and of course reverb.

The typical spring reverb sound is generated by a Belton/Accutronics type 4 spring tank with 3 individual springs. It can be placed pre or post the VCF/VCA section and equalized by the Tone parameter.

The Crash function generates the popular thunder effect that occurs when kicking an amplifier with spring tank. You don't have to kick Retroverb Lancet you simply can achieve this effect by pressing the Crash button. It also can be triggered by a Gate voltage.

The multimode filter works as lowpass or highpass with a slope of 24 dB per octave or as bandpass with 12 dB per octave. It is followed by a voltage controlled amplifier. The filter and amplifier can be modulated individually by different sources.

The Retroverb Lancet offers 3 internal modulationGorgeous analogue goodness
in this all-rounder, featuring overdrive, filter, envelope, LFO and a nice retro spring reverb among others processing options. Tons of character. sources:

Envelope follower: the envelope follower converts the amplitude characteristic of the audio input signal into a control voltage.
Envelope generator: the envelope generator can be triggered by the input signal itself, a second audio signal or a gate voltage. Depending on the trigger source it works as Attack-Decay or as Attack-Sustain-Release envelope.
LFO: the LFO offers saw up and saw down, square, sine as well as sample&hold. Additionally it can use the envelope generators settings as waveform. It can oscillate freely or reset by different trigger sources.

The Retroverb Lancet also offers a CV/Pedal input which can be feed by external control voltages or can be used with expression pedals.

Notes: This new device is a powerful new CV controlled effects unit for your electronic music setup and pairs extremely well with the KOMA Field Kit.

- Looper
- Frequency Shifter
- Sample Rate Reducer/Bitcrusher
- Digital Delay
- Analogue Spring Reverb
- 4 Channel VCA Mixer
- 4 Step Mini Sequencer
- Envelope Generator

All of this, combined with the new 4 Channel CV Interface which allows you to route four CV signals throughout the device, means an incredible control over sound and timbre and a great addition to your mobile performance rig.

The Field Kit FX is built up from 7 separate functional blocks all focused on mangling and changing incoming audio and CV signals. They are designed to operate together as a coherent addition to our Field Kit Electroacoustic Workstation or alternatively together with other pieces of music electronics with the ability to use control voltage signals.

Notes: The JMT Synth NOISY MIC-2 is a unique vocal instrument and processor designed for extreme textures stemming from the human voice. The multiplexer circuit combines the microphone output with a switchable internal VCO, this mixed signal is then passed through a high-gain distortion equipped with an equalizer for final tone-shaping. The VCO can be modulated by an LFO or an external CV source for complex FM-like timbres. This combination of simple circuits forms a unique vocal processor with a wide range of timbres and effects. The microphone is outfitted with a mute switch, making it suitable for live performance.

*Do not connect any other equipment except the included microphone. It is different from normal Midi terminals in that it has special wiring, so connecting other objects to it will damage the circuitry.*

Notes: Third-gen version of Benidub's 'plug and play' spring reverb is better than ever. Lush, vintage spring reverb now with adjustable filter routing and built-in soft clipping circuits to add saturation.

Supplier's Notes:
Spring reverb preamplifier combined with a LP-HP filter

SPRING AMP III marks the third iteration in the renowned "Spring Amp" series: desktop effects designed to bridge the gap between audio mixers and spring reverb tank, offering dynamic filtering options in an intuitive and ready-to-play package. A culmination of Benidub's expertise and your feedback, combined to create the ultimate Spring Amp.

This new all-in-one dub reverb and filter machine features a full suite of powerful and intuitive controls, making it easy to dial in your favourite spring reverb tones in the studio or on stage.

Everything you loved about its predecessor it's still there, enriched with new features and even more playability than before.

Benidub added a push-button switch for routing settings, allowing you to place the filter before or after the spring tank for more mellow or dramatic swings. SAIII now features an in-built soft clip circuit on both input and filter which lets you push your sound even further without damaging your performance and get that classic, warm, musically pleasing saturation which adds rich complexity to your swells. Every feature is clickless and the circuit has an in-built low noise filter alongside Class-A discrete components.

The Spring Amp III is designed to be a plug-and-play dub reverb effect, delivering the classic dub sound instantly upon connection.

Features

Extra low noise reverb pick up amplifier and innovative power amplifier

Discrete transistors front end amplifier for the best achievable noise figure, and a 7.5W constant current amplifier drives 8ohm input reverb tanks for maximum volume and best treble response.

Inbuilt 12db/oct resonant HP-LP VCF

The Spring Amp III has an inbuilt analogue filter with controls on its cutoff, resonance, and modulation. It features a crossfader between low-pass and high-pass filters outputs and a click-less switch to place the filter before or after the spring tank.

Independent volume controls

Filter and preamplifier have independent volume controls, enabling the unit to function as a standalone filter or directly after an instrument with a line output.

Specifications

1. Power input: 12VDC,1A, centre positive, 2.1mm x 5.5mm barrel connector.
2. Audio input/output: 1/4" bal. or unbal. mono jack. Balanced connection improves the signal-to-noise ratio
3. Gain: sets the input amplifier gain, from unity gain to overdrive.
4. Cutoff: sets the filter's cutoff frequency.
5. Resonance: sets the amount of filter's resonance.
6. LFO wave: switches between 6 different LFO waveforms.
7. Spring tank connections: 1/4" unbal. mono jack to RCA.
8. Reverb volume: sets the spring reverb volume.
9. Dry to filter: sets the amount of dry signal that, after being filtered, is added to the unit's output.
10. Pre/post springs: click-less switch to change the spring signal routing, allowing for the filter to be placed before or after the spring tank.
11. LPF/HPF: crossfade between HP and LP filter outputs.
12. LFO rate/depth: dedicated controls to set the filter's cutoff modulation speed and amount.

Compatible spring tanks:

The Spring Amp III needs to be connected to a compatible spring-tank in order to work correctly. Please never connect the Spring Amp III to a tank without making sure that it is a compatible one.