100% Compra Segura

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Compra Segura

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Synth modules

Inicio  Equipment  

Synth modules

Options
Artículos del 1 al 50 de 58 en la página 1 de 2
1  2  »
Subscribe to our weekly Studio Equipment emails
2hp
Cat: 686028 Rel: 04 May 18
 
Signal splitter module
Notes: Mult is a 2 input, 6 output signal splitter. Channel 1 is normalled to channel 2 when no cable is present, allowing the user to split an input signal six ways, or two input signals with three outputs each.
Read more
MRP:$39.04 SAVE 15%
 2 in stock $33.33
2hp
Cat: 635861 Rel: 30 Dec 16
 
Signal splitter module
Notes: Mult is a 2 input, 6 output signal splitter. Channel 1 is normalled to channel 2 when no cable is present, allowing the user to split an input signal six ways, or two input signals with three outputs each.
Read more
MRP:$39.04 SAVE 15%
 2 in stock $33.33
2hp
Cat: 686042 Rel: 08 May 18
 
2 channel passive attenuator
Notes: Trim is a 2 channel passive attenuator. It features two individual channels of attenuation.
Read more
 2 in stock $47.22
Click for better price!
or call +44 20 7424 1960
quote 686042
2hp
Cat: 635863 Rel: 30 Dec 16
 
2 channel passive attenuator
Notes: Trim is a 2 channel passive attenuator. It features two individual channels of attenuation.
Read more
 3 in stock $48.02
Click for better price!
or call +44 20 7424 1960
quote 635863
Cat: 752443 Rel: 25 Oct 19
 
32HP metal enclosure for Eurorack modules - Beta version
Notes: Limited Beta version of the popular Pod32. These are new, fully tested and functional units. The only difference between the Pod32 Beta and the regular Pod32 is that the Beta version has fewer holes to screw in modules. Most common Eurorack sizes will fit from 4HP to 32HP, but some odd sizes and combinations won't fit. Please refer to the product image, or visit the 4ms website for possible module combinations.

Pods are a perfect way to get started in Eurorack module, or add a couple more modules to your monster system!

Made from 100% anodized aluminium, Pods are light, tough and perfect for on-the-go set ups. Mix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!
Read more
MRP:$28.97 SAVE 17%
 3 in stock $24.14
FORTHCOMING
ADDAC System ADDAC200S Size Matter Module (red faceplate)
Cat: 776135
 
adapter module
Notes: ADDAC System's 1/4 to 1/8 inch adapter allow you to connect one 1/4 inch jacks to an 1/8 inch one right in from your rack- now you can leave all those cable adapters behind.

Mechanical:
. Format: Eurorack
. Width: 4 HP
. Depth: 3.5 cm

Electrical:
. Passive
Read more
MRP:$49.12
coming soon $48.28
Cat: 772814 Rel: 19 Jun 20
 
Control voltages module
Notes: Enter the Behringer 992 CONTROL VOLTAGES Module. An authentic reproduction of the circuitry from the Modular 55 & 35 Series used by the world's most famous pop, rock and jazz musicians. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The 992 CONTROL VOLTAGES features 4 channels for CV signals routing to the 904A LPF module. This allows your sound to be freely connected/disconnected with a flip of a switch. Putting the switch in its up position means that you are allowing your signals to connect to other modules and vice versa.

An external input is available If you have an additional input you want to connect to the 992 CONTROL VOLTAGES module. And with the inverting Attenuator knob, you can adjust the CV level of this signal by turning it clockwise to adjust the CV level from 0 to 10 or counterclockwise to change it from 0 to -10.

3 switched and summed CV inputs are present for the frequency control of VCF modules which can be connected via 3.5 mm TS cables. The 992 CONTROL VOLTAGES allows you to send out the combined voltage from all 4 inputs via 3 parallel CV outputs; which can drive multiple 904A LPF and 904B HPF modules for an unlimited number of sonic combinations.

Installing the 992 CONTROL VOLTAGES is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and mount the module using the included screws. This allows for the 992 CONTROL VOLTAGES to be mixed with other synth modules for a truly unique set up.

Read more
 9 in stock $48.28
FORTHCOMING
Behringer 994 Multiples Module
Cat: 772832
 
multiples module
Notes: Enter the Behringer 994 MULTIPLES Module. An authentic reproduction of the circuitry from the Modular 55 Series used by the world's most famous pop, rock and jazz musicians. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The dual 4-socket multiples of the 994 MUTLIPLES allows you to split CV or audio signals to multiple destinations. Now, one signal can control several modules.

Installing the 994 MULTIPLES is simple as it was designed to fit into a standard Eurorack case. This allows for the 994 MULTIPLES to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $33.58
Cat: 772823 Rel: 19 Jun 20
 
oscillator controller module
Notes: Enter the Behringer CP3A-O OSCILLATOR CONTROLLER module. An authentic reproduction of the circuitry from the Modular 55 and 35 series mixers used by the world's most famous pop, rock and jazz musicians. Now musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

The CP3A-O Module features 4 routing switches that enable you to send Control Voltages to one or more oscillators. Switches 1 to 3 are connected to Control Inputs 1, 2 and 3; switch 4 can be used to route an external Control Voltage signal via a 3.5 mm TS plug and can be controlled by an attenuator knob.

You can route up to three external control voltage signals to any of the three summed Control Inputs. Signals from these inputs can be combined by flipping any of the matching routing switches on. The parallel jacks at the bottom will route the final combined voltage signal to any module they're connected to. A great way to utilize the CP3A-O is to have it drive multiple 921A or B oscillator modules which can allow you to create more intricate patches and hours and hours of fun.

Installing the CP3A-O is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and mount the module using the included screws. This allows for the CP3A-O to be mixed with other synth modules for a truly unique set up.
Read more
 9 in stock $45.13
Cat: 760211 Rel: 06 Mar 20
 
synth module
Notes: Compact and simple four-input mixer module from Uncle Dieter. Linear pots make it suited to mixing CV signals but it can also handle audio. Mixed signal hard-wired to two sockets.

Supplier notes:
Module A-138n is a simple four channel mixer, which can be used with either control voltages or audio signals. Each of the four inputs has an attenuator available. The output is twice available (two sockets, hard-wired like a multiple).

HP : 4
Read more
 5 in stock $47.00
Cat: 577779 Rel: 14 Jun 19
 
Passive multi-port distributor - 2HP
Notes: 2HP narrow version of the A-180 multiples module. It is a passive signal splitter suitable for audio or CVs. Two sets of four jacks are interconnected, by placing a solder bridge you can connect all eight jacks.
Read more
 5 in stock $35.68
Cat: 751728 Rel: 23 Oct 19
 
Dual passive attenuator - 4HP
Notes: Module A-183-1 is a simple passive dual attenuator. Passive means, that each unit is made of two sockets and a 50k linear potentiometer only. There are no active parts like amplifiers or buffers and no power supply is required.

This is how the A-183-1 works: At the output socket appears the attenuated input signal, i.e. zero level at the fully CCW position and max. level and the fully CW position.

Applications:

Adjustable level of CV or audio signals to control other modules that do not have attenuators (e.g. Dual VCA A-132-1, Quantizer A-156, CV-to-Midi interface A-192 and modules of other manufacturers).
Read more
 2 in stock $39.88
Cat: 751731 Rel: 23 Oct 19
 
Compact module for attenuating control voltage signals - 4HP
Notes: Module A-183-2 is a voltage offset generator combined with an attenuator/polarizer.

This is how the A-183-2 works: At the two output sockets (simply two connected sockets) appears a DC voltage that is adjusted with the Offset control in the range 0...+5V or -5V...+5V. An internal jumper is used to select the offset range (0...+5V or -5V...+5V). Other ranges are possible by changing a resistor on the pc board (e.g. 0...+10V or -10V...+10V). The DC voltage generated by the Offset control is overlaid by the attenuated voltage that is fed to the In socket. The function of the attenuator control can be set to Attenuator or Polarizer by means of a toggle switch. When the switch is in the Attenuator position the control works as an usual attenuator, i.e. zero level at the fully CCW position and max. level and the fully CW position. When the switch is in the Polarizer position the control works as a polarizer, i.e. zero level appears at the centre position. Right from the centre position the In signal is added to the offset voltage, left from the centre position the In signal is subtracted from the offset voltage. In other words: at the fully CW position the non-inverted In signal is added with the full level to the offset voltage, at the fully CCW position the inverted In signal is added with the full level to the offset voltage.

The amplification range for the input is about 0...+1 in the attenuator mode, and -1...+1 in the polarizer mode. The amplification range can be modified by replacing a resistor by another value.

Applications:

Generation of adjustable DC voltages overlaid by control voltages with adjustable level and polarity to control other modules that do not have attenuators or offset controls, e.g. Sampler A-112 (mainly for the wavetable mode), dual VCA A-132-1, VCLFO A-147-2 for waveshaping and ring modulator applications, Quantizer A-156, Theremin A-178, CV-to-Midi interface A-192 and modules of other manufacturers).
Read more
 2 in stock $45.13
Click for better price!
or call +44 20 7424 1960
quote 751731
Cat: 751740 Rel: 23 Oct 19
 
DC coupled amplifier - 4HP
Notes: Module A-183-3 is a simple amplifier. It is DC coupled and can be used for both CV and audio signals. The maximal amplification can be switched between 1, 2 and 4 (in position 1 the module does not work as a real amplifier but only as attenuator). The level can be adjusted by means of the Level control between zero and the chosen maximum amplification (1/2/4). Two overload LEDs indicate if the output signal goes beyond about +10V or becomes less than about -10V. Input and output are equipped with miniature 2-fold multiples (nothing but 2 connected sockets).

The main application of this module is to adapt differing audio or CV levels between different modules or systems. For example, LFO, ADSR or Gate levels between modules of different manufacturers can be increased or attenuated. But even audio signals can be attenuated or amplified up to 4. But the module cannot be used as an amplifier for external low level audio signals (e.g. microphones or electric guitars)!
Read more
MRP:$51.64 SAVE 15%
 6 in stock $44.07
Click for better price!
or call +44 20 7424 1960
quote 751740
FORTHCOMING
EMW Adaptors 101 Module (black faceplate)
Cat: 775806
 
adaptor module
Notes: A simple passive adaptor with 2 x mono to stereo or stereo to L-R mono, dual P2 to RAC and dual P2 to P-10.

Eurorack (3U) form factor - 8 HP width
Power consumption: +12V [0mA] / -12V [0mA]
Weight: 48g
Depth: 35mm
Read more
MRP:$46.60 SAVE 17%
coming soon $38.83
FORTHCOMING
EMW Linear Attenuators Module (black faceplate)
Cat: 775772
 
attentuators module
Notes: The EMW Linear Attenuators module is great for controlling the level of audio signals and control voltages. Signals patches into IN1 or IN2 will suffer an attenuation that can be adjusted from zero to infinity. An extra 4-patch connections is also present to expand the module's usability.

Eurorack (3U) form factor - 6 HP width
Dual adjustable DC-Audio attenuation controllers
Attenuation range: zero to infinity
Additional 4 patch connections
Power consumption: +12V [0mA] / -12V [0mA]
Connectors: 3.5mm
Weight: 46g
Depth: 22mm
Read more
MRP:$55.42 SAVE 19%
coming soon $45.13
FORTHCOMING
EMW Patch 1 Module (black faceplate)
Cat: 775800
 
patch module
Notes: 4 HP patch (multiples) module with 3 independent groups of 3 connections each.

Eurorack (3U) form factor - 4 HP width
Power consumption: +12V [0mA] / -12V [0mA]
Weight: 23g
Depth: 22mm
Read more
MRP:$28.97 SAVE 17%
coming soon $24.14
FORTHCOMING
EMW Patch 2 Module (black faceplate)
Cat: 775801
 
patch module
Notes: 6 HP patch (multiples) module with 4 independent groups, two with 4 connections each and two with 5 connections each.

Eurorack (3U) form factor - 6HP width
Power consumption: +12V [0mA] / -12V [0mA]
Weight: 48g
Depth: 22mm
Read more
MRP:$45.34 SAVE 17%
coming soon $37.79
FORTHCOMING
EMW Patch 3 Module (black faceplate)
Cat: 775802
 
patch module
Notes: Patch (multiples) with two groups of 1-4 or 4-1 connections with on/off control switches in 3 of the connectors.

Eurorack (3U) form factor - 8 HP width
Power consumption: +12V [0 mA] / -12V [0 mA]
Weight: 65g
Read more
MRP:$52.90 SAVE 17%
coming soon $44.08
FORTHCOMING
EMW Stereo Attenuators Module (black faceplate)
Cat: 775776
 
attentuators module
Notes: Dual stereo attenuators

Connectors: 3.5mm

Depth: 50mm
Read more
MRP:$56.68 SAVE 19%
coming soon $46.19
FORTHCOMING
EMW Switch Interface 1 Module (black faceplate)
Cat: 775784
 
triple switch controller module
Notes: The EMW Switch Interface is an auxiliary module that has three stationary switches that can be used to connect an input-output jack pair or to route one input signal to one jack (left) or another jack (right). Its great for manually controlling signals in your patches.

Read more
MRP:$52.90 SAVE 17%
coming soon $44.08
Cat: 686618 Rel: 30 Apr 18
 
CV & audio signal processor/waveshaper - 3HP
Notes: Erica Pico A LOGIC module is a CERN Hadron Collider for CVs! It takes two incoming CVs and outputs momentary SUM and DIFFERENCE of both CVs, as well as follows curves MAXIMUM and MINIMUM values of both CVs. Try to patch audio signals into both inputs and get distinct ring-modulation and wave-shaping effects!
Read more
MRP:$94.46 SAVE 52%
 1 in stock $45.13
Click for better price!
or call +44 20 7424 1960
quote 686618
Cat: 686691 Rel: 27 Apr 18
 
Companion board for uploading your samples to Pico Drums
Notes: If you wish to upload your own drum samples to Pico Drum module, you'll need the Pico Drum Programmer. Please refer to the Pico Drum user manual for sample upload instructions via a plug in for the Google Chrome browser.

- 5 pin header connects with the module, USB header connects with the computer
- USB cable is not included
Read more
 3 in stock $25.18
Cat: 686648 Rel: 30 Apr 18
 
Signal manipulation module - 3HP
Notes: Erica Pico SCALE module allows you to manipulate audio or CV signals - attenuate, boost, invert and offset - in order to achieve interesting modulation effects.
Read more
 1 in stock $46.16
Click for better price!
or call +44 20 7424 1960
quote 686648
FORTHCOMING
Eurorack Hardware Modules ATT 2HP Triple Attenuator Eurorack Module (black faceplate) (fully assembled)
Notes: Get the most signal attenuation in the smallest 3U package possible! The ATT module features three independent IN - Attenuate - OUT circuits in one 2HP module. Works great for attenuating both audio and CV signals. Completely passive, so no current draw on your power supply.
Read more
MRP:$42.82 SAVE 17%
coming soon $35.68
FORTHCOMING
Eurorack Hardware Modules E-OR Selectable Gate Mixer Module (black faceplate) (fully assembled)
Notes: The E-OR is a passive 2HP 'selectable gate mixer,' which means that you can choose between two different gate sources, two trigger sources or BOTH using the three way switch per channel. Great for choosing between various rhythms, clocks, gates, etc. Perfect for manual fills and variation in your set! Matte black panel with white ink. The E-OR is diode protected, so combining two trigger or gate sources is what it is meant to do!
Read more
MRP:$42.82 SAVE 17%
coming soon $35.68
FORTHCOMING
Eurorack Hardware Modules OR Dual Eurorack Combiner Module (black faceplate) (fully assembled)
Notes: The OR is a passive dual OR Combiner module in 2HP for Eurorack. Two channels of three inputs to one output. Matte black panel with white graphics. Perfect for adding gates or trigger signals together as each input is diode protected. Passive, no current draw.
Read more
MRP:$36.53 SAVE 17%
coming soon $30.43
Cat: 674886 Rel: 15 Feb 18
 
Eurorack buffer board
Notes: Active buffer board for the MTX9. Presents unity mixing and buffered splitting. Supplied with all necessary cabling and hardware.
Read more
 1 in stock $48.28
Click for better price!
or call +44 20 7424 1960
quote 674886
FORTHCOMING
Intellijel LPG 1U Passive Low Pass Gate Module
Cat: 782952 Rel: 30 Sep 20
MRP:$47.86 SAVE 17%
coming soon $39.88
Cat: 602202 Rel: 04 Apr 16
 
Passive multiple synth module
Notes: Dual 1x5 Passive Multiple

Two rows of 1 x 5 Passive Multing
Read more
 2 in stock $28.07
Cat: 673902 Rel: 12 Jan 18
 
1/4" TS jack interface for the Pedal I/O 1U system - 8HP
Notes: The Pedal I/O JACKS 1U Module allows you to patch standard 1/4? TS cables to and from your guitar/instrument pedals.

This module only works when connected to a Pedal I/O 1U module via ribbon cable.
Read more
 2 in stock $20.87
Cat: 739060 Rel: 29 Jul 19
 
Dedicated jack expansion module for use with the Stereo Out 1U module
Notes: 1/4" TRS jack panel in 1U for the Stereo Line Out 1U module.

If you don't own an Intellijel case with built-in compatible 1/4" jacks, then you need to purchase a Stereo Out Jacks 1U module, which connects via ribbon cable to the Stereo Line Out 1U module to provide 1/4" TRS output jacks for interfacing with other studio or stage gear.
Read more
 1 in stock $21.51
Cat: 602207 Rel: 04 Apr 16
 
USB socket for charging/powering peripheral devices - 2HP wide
Notes: USB socket for charging/powering peripheral devices.

This tiny but handy module connects the USB A connector to the +5V bus on the Intellijel TPS series powered busboards. Allowing 1A or more of current to be supplied to USB devices such as lamps, phone chargers, and usb powered musical devices.

It connects to the bus via supplied two-pin cable.

*Compatible with the TPS30 MAX and TPS80 busboards. TPS30MINI board requires an adapter.
Read more
 2 in stock $25.50
FORTHCOMING
SynthRotek MIX Mixer Module (black faceplate) (fully assembled)
Notes: This simple passive mixer is suitable for mixing both audio and control voltage sources. Three channel inputs mix down to one output.

It is not suitable for additive voltage applications. All the jacks are switched to ground to minimize external interference when not patched. This can lead to unwanted attenuation of the output signal unless you plug a dummy cable into the unused channel(s) or, even easier, you can turn the channel's pot completely CCW.

Specifications:
Width: 2HP
Power consumption: none
Module screws included
Read more
MRP:$30.23 SAVE 14%
coming soon $25.98
FORTHCOMING
SynthRotek TST Module (black faceplate) (fully assembled)
Cat: 778316
 
test kit module
Notes: Test your modules safely without reaching into your case! The TST has two keyed 16-pin headers on the front of the module so you can plug and unplug quickly and easily. Two 16-pin plugs are included to shield the power pins when the module is not in use. It also has LEDs to indicate the power status on each rail.

Please note: Use this module at your own risk. You will be exposing electricity to the front of your modular system. Be careful not to dangle patch-cables, etc. on the exposed pins. This may damage modules and your power supply. Be smart and safe!

Features and Specifications:
Two 16-pin connectors and plugs on the front side of the module
LED indicator for each rail
Module width: 3HP
Module depth: 5mm
Current draw:
+12V: 1mA
-12V: 1mA
+5V: 1mA
Includes keyed power cable, 2.5mm and 3mm screws
Read more
MRP:$34.01 SAVE 16%
coming soon $28.60
Cat: 719670 Rel: 02 Sep 19
 
Dual attack/decay envelope
Notes: 2ENV is a dual attack - decay envelope; it can be switched between full sustain (the output remains at full level as long as the GATE input is on) and zero sustain (for percussive envelopes). Another switch (SLOW/FAST) allows selecting the time range.

For manual triggering there is a button for each envelope.

CV control: Both attack and decay time can be CV controlled; the CV "multiplies" the time by 1...approx. 8 times.
Read more
 6 in stock $40.93
Click for better price!
or call +44 20 7424 1960
quote 719670
Cat: 777169 Rel: 15 May 20
 
LFO module
Notes: A dual LFO with different waveforms and triangle-sawtooth blending.
The 2LFO module has two LFO units with different features and generates modulation voltages mostly below the audio range. This module offers

RATE knobs for controlling the frequency
SLOW / FAST switch for two frequency ranges; with FAST the rate can go into the lower audio range
SHAPE knob for the first LFO, blends from rising sawtooth to triangle to falling sawtooth
Triangle / Sawtooth switch for the second LFO; changes the waveform of the output
PULSEWIDTH knob for the second LFO, this sets the pulsewidth of the according output
control LEDs for the output waveforms
PWM input for modulation of the squarewave pulsewidth of the second LFO
Read more
MRP:$42.82 SAVE 18%
 2 in stock $35.17
Cat: 719699 Rel: 03 Sep 19
 
Amplifier for audio signals
Notes: 2SIGNALAMP contains two amplifier stages for audio signals; the amplification can be adjusted up to 15:1.

A clip LED indicates that the amplified level exceeds the usual range of AE modular and is short before clipping.

Main purpose of this module is to boost external audio signals for further processing within AE modular, or also the triangle output of the VCO which has by design a lower signal amplitude.
Read more
 3 in stock $27.56
Cat: 719668 Rel: 03 Sep 19
 
Dual voltage controlled amplifier module
Notes: 2VCA contains two separate VCA (voltage controlled amplifiers); the classic module to shape the volume of a sound that is fed to IN by a control voltage, e.g. from an ENV to the CV input.

A switch determines the operation mode (DC/CV or audio), choosing the right position can reduce/avoid pop's with short attack envelopes.

An additional knob for each VCA attenuates the level, if necessary.
Read more
 2 in stock $28.60
Cat: 719689 Rel: 02 Sep 19
 
Versatile mixer/quadattenuator
Notes: 4ATTMIX offers four input channels which can be level controlled / attenuated by the corresponding knobs. The attenuated signals are sent to four outputs.

Additionally, each channel can be sent to an internal mixer by the switches beside the knobs. The mix signal is then sent to the mix output.

An additional switch selects the general operation mode for the mixer, for DC/CV signals or for audio signals.
Read more
 4 in stock $33.33
Cat: 719687 Rel: 02 Sep 19
 
4 minijack inputs/outputs
Notes: 4I/O offers four minijack sockets that are connected to the AE sockets for connecting external audio sources, CV's and Eurorack modules. Sockets 1 and 3 are stereo sockets; if a stereo cable is inserted here the signal is available on sockets 1/2 and 3/4. With mono cables the four sockets can be used independently.

All sockets have an overvoltage protection (as AE modular is limited to 5V) and can be switched between audio and DC/CV signals.
Read more
 4 in stock $36.48
Cat: 719657 Rel: 02 Sep 19
 
Filter module
Notes: This filter module is a variant of the Wasp filter, a quite strange circuit used first in the EDP Wasp synth end of the seventies, which abuses digital chips in an analogue way leading to the characteristic sound of this filter type. In this module, vactrols are used for controlling the filter frequency.
Read more
 3 in stock $35.68
Cat: 719658 Rel: 02 Sep 19
 
Stereo headphone amplifier
Notes: A stereo headphone amplifier for AE modular.

It has separate left/right inputs; via a switch it can be set to mono operation (only left input is used). One common volume control for both outputs.

Two headphones can be attached via 3.5mm stereo minijack sockets.
Read more
 2 in stock $37.79
Cat: 745619 Rel: 17 Sep 19
 
Pure analogue kick drum module
Notes: KICK is a pure analogue Kick drum of raw bass power.

It has three knobs: PITCH for the overall pitch of the sound; with DECAY the length of the sound can be set and with DRIVE a nice distortion can be added to the sound.

With the pitch decay switch the pitch follows the amplitude, giving a bit different character.

And a trigger button is available to check the sound without an external trigger signal.
Read more
 8 in stock $34.11
Cat: 719685 Rel: 02 Sep 19
 
Lowpass gate module for AE modular
Notes: The LOPAG is the lowpass gate module for AE. It is based on a Vactrol (like all good lowpass gates) and has two inputs: IN (audio signal) and TRIG. A pulse on the TRIG input opens the signal path shortly and via the characteristics of the Vactrol the audio signal is filtered and attenuated in a plucked, percussive way. Additional GATE and CV inputs allow more control over the way the module works.
Read more
 2 in stock $34.90
Cat: 719678 Rel: 02 Sep 19
 
Audio mixer with 4 inputs
Notes: This module consists of an audio mixer with 4 inputs and their level knobs, plus an additional 4 separate inputs that are mixed at full level (especially for mixing CV signals), and a separate output.
Read more
 5 in stock $25.19
Cat: 719676 Rel: 02 Sep 19
 
Noise generator
Notes: Analogue & Digital Noise Module.

- The A output generates analogue noise (technically, a fluctuating voltage between about 1...4V)
- The D output generates digital noise, which is a random changing 0V / 5V

The RATE knob controls the colour of the noise, which goes from almost white noise on A output and knob fully clockwise to a rather harsh and digital sound on D output and RATE counter-clockwise.
Read more
 1 in stock $24.66
Cat: 719656 Rel: 03 Sep 19
 
State variable filter
Notes: This module is a classic state variable filter.

It offers the control knobs cut-off frequency, resonance and CV attenuator; two signal inputs for different signal levels control the "drive" of the module. Compared to the wasp filter, this module has a significant self-resonance, and also a very quick response to cut-off frequency changes.

Three different outputs provide lowpass, bandpass and high-pass output.
Read more
 1 in stock $34.64
Cat: 719700 Rel: 02 Sep 19
 
Three USB power output sockets
Notes: Each of the three USB-A sockets on the USBPOWER module can be used to charge your mobile phone, connect a USB lamp or supply power to any other USB device. Furthermore, the output socket provides +5V and ground to supply e.g. DIY circuits on a breadboard.

Please note: This is only a power source via USB sockets; no USB data communication is possible here.

Includes additional USB lamp!
Read more
 3 in stock $20.73
Cat: 719693 Rel: 02 Sep 19
 
Classic VCO for AE modular
Notes: The VCO module is a "classic" VCO featuring:

- Two CV inputs 1V/octave
- MODulation input with Level-knob, switchable to frequency or pulsewidth
- PWM input
- Coarse/Fine knob for frequency
- Pulsewidth knob for squarewave
- Square/Triangle/Sawtooth output

The module works well if you need an oscillator for primary musical/melodic use.
Read more
 4 in stock $36.74
Artículos del 1 al 50 de 58 en la página 1 de 2
1  2  »

Filter

Synth modules
Accesorios
Release Date
Featured
Close