Coming soon: Studio equipment

FORTHCOMING

Related products...

ADDAC System ADDAC300 REV.02 Power Starvation Module (effect synth module)

Cat: 1075525

A revision 02 of ADDAC's Power Starvation module

Notes: This is a revision 02 of ADDAC's Power Starvation module.

It provides an "ideal" way to power starve other modules, starving modules means the modules will receive less voltage than the standard +/-12V supply.

Power starvation is the first hack that any "DIY'er" learns. It's also one of the hacks that can generate some of the most interesting sonic effects in circuit bending.

Plug any module below +/-200mA through it and independently tune it's supply power. This will have most interesting effects in analog modules: filters, delays, mixers... They can either go silent or start screaming at your ears, going berserk with the lack of current to behaving normally, making them cough, choke... Something like a safely induced heart attack...

While revision 01 was a simple circuit with pot working as a voltage divider, this upgraded version uses a DC to DC converter that receives its input from the +12V power rail and outputs a bipolar 15V supply. This DC-DC converter also offers short circuit and overcurrent protection. The +/-15V lines are then sent through variable analog voltage regulators that can output a range of 2.5V to 13.5V.

In other words, the module features a +/-200mA PSU with variable voltage outputs.

Safety disclaimer:

While using ADDAC300 should be safe for any module, there may be specific modules where its use may not be advised.

!! Use at your own risk !!

ADDAC System won't be responsible for any issue that may arise while using ADDAC300 power starvation.

If in doubt contact ADDAC prior to any connection.

Tech Specs:

6HP
4.5cm deep

UP TO 600mA +12V (Depending on the starving module connected)
0mA -12V

Tags: Effects module | Utility module | Power module

coming soon $142.53

(No payment required now - pay when released)

FORTHCOMING

Related products...

ADDAC System ADDAC511 VC Stochastic Voltage Generator Module (voltage generator synth module)

ADDAC System

Cat: 1080319

This is a fully fledged 4 channel voltage generator capable of all things random, with quantization, probability, distribution, interpolation, time control, clock, states and a 32 step sequencer

Notes: This module greatly expands on the principles of the ADDAC501 Complex Random from 2013.

This is a fully fledged 4 channel voltage generator capable of all things random, with quantization, probability, distribution, interpolation, time control, clock, states and a 32 step sequencer.

The module operation relies on its screen for all parameter editing, each button accesses one single page where parameters can be changed allowing a fast and fluid workflow across all settings.

Long presses on all buttons have a secondary function allowing fast Channel selection plus Mute and Hold functions.

The combination of having 2 Encoders with Push buttons allow swift navigation and editing across all pages and their settings.

Tech Specs:
20HP
4.5cm deep
200mA +12V
100mA -12V

Tags: Random module | Quantizer module

coming soon $580.08

(No payment required now - pay when released)

FORTHCOMING

Related products...

Arturia Pigments 6 Virtual Synthesiser Software (boxed) (virtual synthesiser software)

Arturia

Cat: 1071523

Pigments is an all-in-one software synthesiser for modern producers, blending 6 cutting-edge synthesis engines, a colour-coded interface, effortless drag-and-drop modulation, premium effects and generative sequencing

Notes: Pigments

Sound design synthesiser

Pigments is an all-in-one software synthesiser for modern producers, blending 6 cutting-edge synthesis engines, a colour-coded interface, effortless drag-and-drop modulation, premium effects and generative sequencing. Shape your sonic vision with boundary-pushing sound design.

Shape your sonic vision

Explore in-depth sound design with every synthesis type you could need and a responsive, color-coded interface that rewards experimentation - from playful discoveries to intricate modulation and patch creation.

Multi-engine versatility

Discover pure sonic possibility with 6 forms of synthesis: Modal, Granular, Wavetable, Sample, Harmonic and Virtual Analog, alongside the Utility engine.

Visual sound design

Streamline your creative process with Pigments' clean, color-coded interface and drag-and-drop modulation - every step is designed for fast, fluid sound design without breaking your flow.

Modern-sounding aesthetic

Pigments is defined by a boundary-pushing sound and over 1600 instantly-rewarding presets - from hybrid-acoustic tones to sweeping granular textures. Expandable with the sound store.

Harness every shade of synthesis

Craft immense, composite soundscapes like no other synth. With 6 engine types, twin morphing filters, 19 high-quality FX, advanced modulation and creative sequencing - Pigments' in-depth sonic architecture lets your imagination lead the way.

Close the gap between inspiration and outcome

Transform your ideas into fully realized sounds with Pigments' visual workflow. Whether you're just experimenting or building complex patches - see what's happening, modulate with ease and watch your creativity come to life.

Clear, color-coded design

Pigments' clean, intuitive layout and color-coded modulation sources make it easy to see where you are and what's connected at a glance - so you can stay focused.

Effortless workflow

From drag-and-drop modulation, quick-edit tools, and streamlined signal routing, every element is crafted to make sound design fluid efficient and enjoyable.

Animation that informs

From engine waveforms to envelope transients and modulation dynamics - Pigments' real-time animated feedback offers instant visual clarity and aliveness.

A next-gen synth for innovative electronic genres

Pigments is at the forefront of modern sound design, embodying an innovative aesthetic that underpins the world's most daring music - from phosphorescent tones to thundering basses and sweeping granular expanse

Modern-sounding aesthetic

Discover a precise, powerful and high-quality sound that goes hand-in-hand with leading electronic genres - from trap to EDM, house, cinematic and beyond.

Extensive factory library

Harness 1500+ meticulously crafted presets that define Pigments' distinctive sonic identity and push its powers to the limit - basses, leads, pads, sequences and much more.

On-trend expansions

Stay on the cutting edge with contemporary presets and genre focused packs that capture today's most innovative musical trends.

Main Features

Two engines in parallel
Modal physical-modeling engine
Complex Wavetable engine
Granular and Sample engine
Harmonic Oscillator additive engine
Virtual Analog triple-osc engine
Includes Engine Cross- modulation
Utility Engine
5-shape Virtual Analog Oscillator
2 Noise Engines
External audio input
Two filters
13 modern filter types and 49 filter modes
Classic filter types from V Collection instruments
Continuous series/parallel routing
Powerful FX section
2 Insert buses, 1 Send bus, 3 FX per bus
Modulable parameters
19 algorithms including Shimmer Reverb, MultiBand Compressor, Distortion, Vocoder, and more.
Advanced modulation system
Colour-coded workflow
Drag-and-drop assignation
Hover quick-edit adjustment
Modulation side-chain
Envelopes, Morphing LFOs, Function generators, Random generators, Combinators and more
4 dynamic, assignable Macro controls
Generative Sequencer and Arpeggiator
Create complex, evolving and polymetric sequences/arps
Advanced random sequence generator
Sequencer lock & browser
Visual interface
4k resizeable interface
Interactive animated interface
Simplified Play View
Dark or Light themes
Extensive library of 1600 presets
MPE compatibility
NKS controller compatible
MTS-ESP microtuning compatibility

Platform specifications

Windows

Win 10+ (64bit)
4 GB RAM
4 cores CPU, 3.4 GHz (4.0 GHz Turbo-boost)
3GB free hard disk space
OpenGL 2.0 compatible GPU
ARM processors not supported on Windows

Apple

Mac OS 11+
4 GB RAM
4 cores CPU, 3.4 GHz (4.0 GHz Turbo-boost) or M1 CPU
3GB free hard disk space
OpenGL 2.0 compatible GPU

Required configuration

Works in Standalone, VST, AAX, Audio Unit, NKS (64-bit DAWs only).

Work with ASC

An elegant and simple solution to help you install, activate, and update your Arturia software instruments.

coming soon $182.31

(No payment required now - pay when released)

FORTHCOMING

Related products...

Arturia KeyLab 88 MK3 USB MIDI Keyboard Controller (black) (USB MIDI keyboard controller)

Arturia

Cat: 1073744

A pro-grade MIDI controller combining a hammer-action keybed with software integration and an array of advanced controls and features.

Notes: Building on the success of their recent rev3. releases (Minilab 3, Keylab Essential 3 and Keylab MK3) Arturia are delighted to share their next gen 88 note controller keyboard, the Keylab 88 MK3.

With a full-size hammer-action aftertouch keybed and next-level software integration encased in hard wearing high-quality materials and hard-wood panelling - KeyLab mk3 88 not only looks the part but will stand the test of time on stage and in the studio.

Keylab 88 MK3 features all of the refinements found in the other MK3 keyboards, but it sports a massive upgrade to it's keybed over previous models, now equipped with a FATAR TP/110 the Keylab 88 MK3 delivers a stunning playing experience, unlike any other 88 note controller on the market.

With a stunning visual display that shows a range of contextual information on-screen alongside touch-sensitive controls and advanced creative features; it enhances every aspect of the music-making process. From integrating effortlessly with Analog Lab Pro and all major DAWs to supporting musical ideation, keyboardists, producers and composers alike can take full command of their setup like never before.

From customizable MIDI settings and intuitive controls to advanced creative features that support musical ideation - KeyLab mk3 is a powerful ally both in the studio and on stage

KeyLab mk3 offers advanced connectivity with all major DAWs including MCU/ HUI protocols, allowing you to view contextual information on-screen, create user programs and have complete control of your music making software and instruments.

With Analog Lab Pro, Ableton Live Lite and a range of timeless instruments from the world-renowned V Collection, discover a suite of pro-grade software to start making music right away.

coming soon $927.03

(No payment required now - pay when released)

FORTHCOMING

Related products...

Black Corporation ISE-NIN Voice Module (synth voice synth module)

Black Corporation

Cat: 1073596

(ISE-NIN) VOICE brings the legendary Japanese discrete analogue sound into a compact 100% analogue Eurorack creation

Notes: (ISE-NIN) VOICE brings the legendary Japanese discrete analogue sound into a compact 100% analogue Eurorack creation. Ideal for combination with an x0x techno rig, the full depth of rich sonic potential and programmability of ISE-NIN can now be patched into new modular concoctions. A full complement of iconic analog oscillators, filters, envelopes, and modulation make this at once a full-featured semi-modular synth on its own, and a powerful addition to any rig with the addition of ISE-NIN BREAKOUT.

Two Oscillators with Deep Modulation

This is a no-compromise compact recreation of a complete voice - lacking only the desktop synth's polyphony. Two oscillators each include multiple waveforms (triangle, ramp, pulse, and square on the VCO-1, with sine and noise replacing triangle and square on VCO-2). Hard sync is available, as is configurable modulation, with dedicated PWM (controlled manually, via LFO, or via envelope 1), and tweakable modulation amounts from both LFO and envelope 1 to VCO-1, VCO-2, or both. The LFO section provides access to waveform (sine, saw, square, random), rate, and delay.

Unmistakable Filter, Dual Envelopes, Musical Control

The unique classic 80s Japanese filter sound is fully embodied here, with highpass filter, lowpass with two slope options (-12 dB, -24 dB), and resonance, all with their own controls. Dual envelopes, each with four stages, are assignable to the filter, VCO modulation (ENV-1), and VCA (ENV-2), with an envelope mod fader. Envelope 1 also sports a polarity switch. As with our desktop synths, musical control is front and center, literally: you'll find dedicated controls for toggling keyboard input to each envelope, a keyboard amount to VCF fader. If you're using ISE-NIN alone as a voice, you'll have access to 1v/octave and gate inputs with glide control.

Unprecedented Patchability

Start with ISE-NIN VOICE (36HP), and you'll already have a deep semi-modular instrument on its own. But add ISE-NIN BREAKOUT (22HP), and you can place every single control under one-to-one voltage control for unmatched patchability and programmability. This is a level of sound possibility that could would normally require investing in several rows of modules; here, they're all readily accessible on one convenient, compact front plate. Not only do you get dedicated inputs for the oscillators, filters, and each separate envelope stage for both of the two envelopes, but there are separate FM inputs to each oscillator and every possible routing of the LFO, envelope, and keyboard. XMOD amount and VCO-2 quantized range each get their own input.

Power consumption: 110mA at +12V and 30mA at -12V

Depth: 38mm

36 HP

Tags: Synth voice module

coming soon $1,081.71

(No payment required now - pay when released)

FORTHCOMING

Related products...

Black Corporation ISE-NIN Voice Breakout Module (breakout synth module)

Black Corporation

Cat: 1073600

The output section of the ISE-NIN BREAKOUT is a perfect match for the voice

Notes: Breakout for the ISE-NIN Voice

Extensive outputs, open-ended Functionality

The output section of the ISE-NIN BREAKOUT is a perfect match for the voice. Each waveform for each oscillator has its own independent instrument, as does each envelope and the inverse of envelope 1, each filter and slope, each LFO waveform, noise and low noise, and mix. There's also a dedicated headphone output so you can enjoy ISE-NIN without waking the neighbours. You'd be hard pressed to find as much tonal range, as many distinctive vintage Japanese tones, or as much expandability with as much horsepower as ISE-NIN VOICE and its BREAKOUT.

Tags: Synth voice module | Expander module

coming soon $337.00

(No payment required now - pay when released)

FORTHCOMING

Related products...

Black Lion Audio PBR TRS3 LIT 48-Point Gold-Plated TRS Patchbay (audio patchbay)

Black Lion Audio

Cat: 1075401

Gold-Plated TRS patchbay with customizable LED displays

Notes: Eliminate confusion and non-aesthetic labeling when routing your racks of precious gear with the PBR TRS3 LIT patchbay from Black Lion Audio. Built to proven Black Lion standards of build quality and signal conductivity, the PBR TRS3 LIT patchbay features customisable, brightly-lit LED displays for every input and output. Simply connect a USB keyboard directly to your LIT to customise the displays, or use the included PatchCAD software to create custom text to export directly to your patchbay using a USB drive.

To customise the displays, you have two options: simply connect a USB keyboard to the front of the unit and start typing... or you can use the included PatchCAD software to create your custom digital labels on your computer, and export them to a USB drive to load directly into the unit.

PatchCAD (Mac/Win) lets you customize your digital labels using a quick, familiar spreadsheet-like interface. Simply type out how you want your labels to appear, export the file to a USB drive, and connect the USB drive to your LIT patchbay and press the Update button.

Your studio needs more than accessible patching - audio quality throughout the entire signal chain is essential. Black Lion Audio has been trusted for years to modify the best gear to perform beyond its original spec, and they leveraged every bit of that know-how when designing their patchbays.

Every PBR product uses audiophile-grade connectors. Every contact point is gold-plated; a major factor that's missing from most patchbays that you might have encountered. Black Lion's team of engineers have worked tirelessly to ensure that the PBR series delivers proper quality through-and-through.

The PBR patchbay series is built Black Lion-tough, with black-anodised aluminium faceplates that make for a matched and sophisticated look.

coming soon $462.96

(No payment required now - pay when released)

FORTHCOMING

Related products...

BlaknBlu Oscar Tria Triple Mode Stereo VCO Module (oscillator synth module)

BlaknBlu

Cat: 1081156

VCO module that functions as a stereo oscillator, a super saw/square/triangle/sub and a chord engine,

Notes: Oscar Tria packs a lot of VCO into 10HP. There are three main modes described below.

Green Mode:

A 'traditional' stereo oscillator. In Green Mode you get the usual three waveforms - saw, triangle and square (with variable pulse width, of course) but you can continuously vary the waveform between the three. For instance, by turning the waveform knob to be just to the saw side of triangle, you get a sound very much like the Minimoog's 'shark tooth'. Green mode also gives you a square wave sub oscillator - one octave below the main oscillators - and a sub sub, two octaves below. Oscar Tria is stereo, of course, so you can detune one oscillator for a rich stereo image - or sum the two outputs to mono and you have two oscillators with two subs, for a BIG sound. Green mode also features through zero FM, and hard sync.

Yellow Mode:

Super-saw! And super-square! And super-triangle! With a sub (of course). Yellow mode allows you to control the number of oscillators making up the super-whatever, from one (not really super) to 24! Again, being stereo you get up to 12 oscillators in one channel and 12 in the other. Add the sub for a HUGE sound.

Orange Mode:

This is a chord engine, with 20 selectable chords. There are controls to select which chord you want and how many notes are played (over two octaves). CV control allows you to set pitch and chord independently, so you can set up a polyphonic sequence, for instance. Again, the output is stereo with detune control of one output.

coming soon $320.42

(No payment required now - pay when released)

FORTHCOMING

Related products...

Clank Chaos 6-Channel Aleatoric Brain Module (clock generator/CV modulation/sequencer synth module)

Clank

Cat: 1084154 Rel: 25 Apr 25

Six channel CV/gate/looper module.

Notes: Chaos is excellent for modulation purposes or as a clock multiplier/ divider, but that's only scratching the surface... It takes a different approach to writing sequences than traditional sequencers, as it is built on six touring machines combined with an effective pattern and clock generator. One of the biggest challenges in electronic music production, especially when it comes to sequencing, is finding that sweet spot between hands-on control and possibilities.

It can be frustrating because many sequencers with lots of fun and playable controls don't always pack the punch you need. On the flip side, you have those bigger menu-based sequencers with tons of options but can feel overwhelming with all the programming they require. It's designed to help you overcome these challenges and make your music-making experience smoother and more enjoyable, whether you're jamming or writing a song you want to execute live.

Typically, a sequencer starts with a blank canvas. However, with Chaos, you begin with all possibilities at your disposal and can easily narrow them down to fit your vision with just a few adjustments. This makes creating a sequence that conveys a specific mood quick and straightforward. Once you have established this initial mood, you can loop it from the last step to step 32 whenever you hear something you like. At this point, you can choose to modify the entire loop or adjust the parameters of any individual step. There is no need for extensive menu navigation; simply pressing a button and turning the encoder gives you control over parameters such as gate time, gate probability, gate width, gate ratcheting, gate swing, notes, scale, slew, and slew amount.

The LED bar continuously displays the voltage output of the selected channel, as well as the gate and each parameter's value, eliminating the need for a screen. You can save and recall the entire sequence of its six channels at any time. Additionally, there is an internal function that allows you to randomize all parameters or just a select few within a specified range, helping you discover new melodies to work with.

Chaos is an endless reservoir of tunes and is incredibly quick and powerful for composing sequences, gate patterns, or modulation. In a short time, it will become the brain of your system.

Six CV outputs can be used for a wide range of applications; everything from chaotic modulations to fine-tuned sequences can be obtained. Thanks to its interface you can quickly adjust the voltages from where the random engine picks new values and then edit them in every aspect.In addition, Slew amount, Quantization, and external sampling are available on every channel.

Thanks to its 6 gate outputs, Chaos can be used as your system's quick and effective clock manager and gate pattern generator. Chaos also provides a stable master clock (10mS to 10Sec) from a separate output and can be clocked from external devices. On every channel, you can set Probability, Width, Swing, Ratcheting, and Time as a multiplier/divider of the master clock or unquantized in mS.

You can freeze the last 1 to 32 steps of randomly generated CVs and Gates in a locked loop when you hear something you like. Loops are not static; every parameter of Chaos can be used again to change the loop behavior in a non-destructive way.

Entering sequencer mode means taking control of every aspect of the looped sequence generated by the random engine. You can change time, width, probability, ratcheting, slew, slew amount, note, note deviation, etc., for each of the 32 steps of all six channels.

Thanks to the external input, you can substitute the random generator with external voltages, transpose a sequence on the fly, and a lot more.

If you're more into generative stuff or want to add a bit of craziness to the patch, you can use the Chaos function to randomize all the parameters on a channel. A sophisticated control named entropy is available on every parameter to set the distance of the new value from the last one.

Chaos can save and recall 10 slots where you can save entire sets or preferred channel behavior. Recall can also be done with an external voltage.

est. release 25 Apr 25 $447.49

(No payment required now - pay when released)

FORTHCOMING

Related products...

Clank Axis 3 Dimensions Amplitude Management Module (envelope generator synth module)

Clank

Cat: 1084174 Rel: 25 Apr 25

Dual envelope generator that features an integrated VCA, crossfader and voltage controlled mixer section.

Notes: In only 12hp, Axis condenses all the classical blocks for the audio amplitude management, redefining the classical envelope -> vca -> mixer path. The idea is to manipulate a sound over three axes: its length, its volume, and its place inside the stereo field.

Axis is a dual envelope generator that features an integrated VCA, a crossfader, and a voltage-controllable mixer section. The initial concept was to combine digital control over an analog VCA to closely emulate the classic Vactrol sound. After more than a year of refinement, Axis has evolved into more than just that. It offers exceptional versatility, providing a wide range of waveforms and the unique capability to simulate the natural percussive qualities of different materials. All this is in a complete analog path.

For the function generator section, we choose a faster method over the classic AD/ ADSR style: a selection of waveforms studied to give back a precise musical effect can be selected with the shape knob. The function length is independent from the actual wave shape and can be settled with the fader timeX from 30hz to 15 seconds. Also, setting the timeX fader at its maximum level will leave the VCA open.

A more typical collection of envelopes can be found in the first half of the dial. All kinds of sounds, from plucked notes to long volume swells passing through lead-friendly lines, can be obtained here.

More unusual, the last section of the knob is thought to simulate the acoustic vibration of a percussed object. Starting with a triangular envelope, from this point on, the more you turn the knob, the more rebounds will be added, simulating the natural ring of a material. Using this section at low rates can generate complex envelopes that could also be suitable for the vibrato-style AM effect. The envelope generator section includes a mode switch (cycle,trigger,hold), a trigger/gate input, an EOC trigger out, a function output, a CV for the envelope shape selection, and one CV for time.

As a cherry on the cake, a crossfader is placed at the end of the chain, blending both Axis halves. With a dedicated fader and CV control, raising it will invert the L/R output, creating nice stereo effects or moving the voices around the stereo field.

The VCA section is more straightforward: it has an audio input/output[1] and a VCA CV input[3].

You can plug the audio I/O to use Axis in its completeness and eliminate a lot of cables and mess!

Soundwise, here at Clank, we are all about vactrols LPGs, but since we knew it's not the most versatile option on the market, we came up with a different design. Blending together a VCA with a not-so-step filter, we obtained a VCA with a nice mild LPG flavor: enough to sound not so "clicky" but not too slow to inficiate really fast sounds.

By default, the envelope created by the function generator is normalized to the CV in of the VCA. Plugging a cable into the VCA in breaks the normalization, in this way you can use a different source to control the VCA and free the function generator for LFOs or modulation duties.

The range Y fader sets the strength of the envelope, but you can also see this control as a volume fader, which is nice since you won't necessarily need an additional volume for your voice after the Axis. Take into consideration that since the Axis VCA is actually a low-pass gate, lowering the rangeY fader also affects the cutoff frequency. The range fader also has its CV control to program dynamic changes to the sound. Basically, it's a VCA over a VCA that permits every note to be at different intensities. Last but not least, Range CV can also be fed by a unipolar modulation CV to obtain vibrato effects or audio rate AM modulations

est. release 25 Apr 25 $436.45

(No payment required now - pay when released)

FORTHCOMING

Related products...

Clank Thererec Sketchable Dual Function Generator Module (function generator synth module)

Clank

Cat: 1084191 Rel: 25 Apr 25

Smart dual-function generator - 6HP

Notes: Thererec is a 6hp smart dual-function generator based on a different approach! Two modern proximity sensors have replaced all the Attack/Decay thing, and this not only saved a lot of space but also turned Thererec into a whole new thing: a fusion between THEREmin gestural expressiveness and a tape RECorder,

Thererec, indeed, can quickly capture your hand movements and translate them into complex Envelopes and LFOs, adding a lot of expressiveness to your set. Once recorded, your movements can be mangled in both time and amplitude; they can be cycled or triggered in one-shot mode, letting you create complex but synchronized control voltage streams.

A straightforward movement with immediate feedback: move your fingers, listen, and connect yourself to the environment. Your body will do the rest.

Thererec sensors will track your movements to generate a voltage flow, and the LEDs and the CV outputs will reflect those movements.

est. release 25 Apr 25 $281.75

(No payment required now - pay when released)

FORTHCOMING

Related products...

Clank Endline Bridge To Outer World Module (mixer synth module)

Clank

Cat: 1084322 Rel: 25 Apr 25

Stereo mixer module with four channels, sub-mix capabilities, sends, returns, a headphone output and transformer-balanced outputs - 10HP

Notes: Endline is the ultimate solution for your audio chain needs. This high-quality 10hp module offers four stereo channels of summing, sub-mix capabilities, two sends and returns, a headphone output, and transformer-balanced outputs. Not only does it process audio with incredible accuracy and clarity, but with its compact 10hp size it also fits seamlessly into your setup. With Endline, you have the opportunity to enhance your audio processing capabilities and enjoy top-of-the-line sound quality that will elevate your listening experience.

Endline is an upgraded version of our previous "SUM" module. It is designed to receive signals from mixers, sub-mixers, and voices, combine them, and output the result. With this new version, we have implemented several new features, including an output section and dual mono or single stereo sends with two dedicated returns.
The sends and return levels can be adjusted to perfectly interface your modular with your external pedals. Moreover, a headphone output with a dedicated level control is included. It features the best-in-class IC that can output 1.5W at 32ohm. With its 128dB signal-to-noise ratio and 112.5 THD, it is not the average headphone output you can find in the Eurorack world.

The line outputs are transformer-balanced (30Hz to 35kHz) and are driven from Burr-Brown OPA. Apart from all those mixing/send-return possibilities, this makes Endline one of the cleanest and most high-end options you can choose in the Eurorack to interface with the world. Lastly, despite its transformers, the device is only 40mm deep.

est. release 25 Apr 25 $436.45

(No payment required now - pay when released)

FORTHCOMING

Related products...

Clank Oracle System Modular Synthesiser (modular synthesiser)

Clank

Cat: 1084326 Rel: 25 Apr 25

Modular synthesiser combining all of Clank's modules - 66HP

Notes: Discover the perfect harmony of our top-of-the-line modules with our ORACLE system - a meticulously crafted 66hp stereo desktop instrument that seamlessly integrates our selection of eurorack modules: a full-featured system that offers a vast array of capabilities in a compact form factor. With ORACLE, you can dig into unorthodox sequencing, interactive modulation, and innovative stereo sounds- spanning styles ranging from ambient to techno, as well as experimental soundscapes and sound design.

At the heart of the system is our renowned module Chaos; within this compact ecosystem, it can unleash its full potential and seamlessly integrate with the other modules.

Chaos can produce control signals quickly and creatively with minimal user input. It can be used as a rhythmic or melodic sequencer, as a random or deterministic source of modulation: A random stream of data that you can manipulate at your linking and then loop.

Our ORACLE system is, indeed, built on the fundamental concept of loops, a powerful and versatile technique used in many forms of audio production. While loops are traditionally used to repeat audio samples, our system, ORACLE, expands on this concept by allowing you to loop various elements, including gestural movements, waveforms, note progressions, and beats from random sources.

With Thererec, our sketchable dual-channel function generator, you can experiment with your system's interaction differently. Move your hands over the sensors and loop your movements to create intricate voltage patterns, envelopes, or LFOs. With Thererec, you can unlock a new level of creativity in your system design.

One of the key features that sets our system apart is our advanced stereo oscillator, Proteo. With its innovative approach, it can convert any voltage source into high-quality audio waveforms and put them in a loop.Waveforms can be frozen or left in a constantly evolving state, giving Proteo an unheard distinctive sound. With Proteo, you can explore new territories and experiment with different audio sources, allowing you to create truly unique stereo sounds.

Axis includes all the classic blocks for audio amplitude management, such as a dual-function generator, dual VCA, a crossfader, channel volume, AM modulation, and dynamic control capabilities like velocity.The idea is to manipulate a sound over three axes: its length, its volume, and its place inside the stereo field.

At the end of the chain, Endline is our ultimate solution for your summing and outputs needs. This high-quality module offers four stereo channels of summing, sub-mix capabilities, two sends and returns, a headphone output, and transformer-balanced outputs.

est. release 25 Apr 25 $2,120.34

(No payment required now - pay when released)

FORTHCOMING

Related products...

Clank Oracle System Plus Modular Synthesiser (modular synthesiser)

Clank

Cat: 1084329 Rel: 25 Apr 25

Enchanced version of the modular synthesiser combining all of Clank's modules, with an additional Proteo oscillator module - 66HP

Notes: Discover the perfect harmony of our top-of-the-line modules with our ORACLE system - a meticulously crafted 66hp stereo desktop instrument that seamlessly integrates our selection of eurorack modules: a full-featured system that offers a vast array of capabilities in a compact form factor. With ORACLE, you can dig into unorthodox sequencing, interactive modulation, and innovative stereo sounds- spanning styles ranging from ambient to techno, as well as experimental soundscapes and sound design.

At the heart of the system is our renowned module Chaos; within this compact ecosystem, it can unleash its full potential and seamlessly integrate with the other modules.

Chaos can produce control signals quickly and creatively with minimal user input. It can be used as a rhythmic or melodic sequencer, as a random or deterministic source of modulation: A random stream of data that you can manipulate at your linking and then loop.

Our ORACLE system is, indeed, built on the fundamental concept of loops, a powerful and versatile technique used in many forms of audio production. While loops are traditionally used to repeat audio samples, our system, ORACLE, expands on this concept by allowing you to loop various elements, including gestural movements, waveforms, note progressions, and beats from random sources.

With Thererec, our sketchable dual-channel function generator, you can experiment with your system's interaction differently. Move your hands over the sensors and loop your movements to create intricate voltage patterns, envelopes, or LFOs. With Thererec, you can unlock a new level of creativity in your system design.

One of the key features that sets our system apart is our advanced stereo oscillator, Proteo. With its innovative approach, it can convert any voltage source into high-quality audio waveforms and put them in a loop.Waveforms can be frozen or left in a constantly evolving state, giving Proteo an unheard distinctive sound. With Proteo, you can explore new territories and experiment with different audio sources, allowing you to create truly unique stereo sounds.

Axis includes all the classic blocks for audio amplitude management, such as a dual-function generator, dual VCA, a crossfader, channel volume, AM modulation, and dynamic control capabilities like velocity.The idea is to manipulate a sound over three axes: its length, its volume, and its place inside the stereo field.

At the end of the chain, Endline is our ultimate solution for your summing and outputs needs. This high-quality module offers four stereo channels of summing, sub-mix capabilities, two sends and returns, a headphone output, and transformer-balanced outputs.

est. release 25 Apr 25 $2,385.52

(No payment required now - pay when released)

FORTHCOMING

Related products...

Clank Proteo Shapeshifting Stereo Oscillator Module (oscillator synth module)

Clank

Cat: 1084164 Rel: 25 Apr 25

Stereo oscillator module with an internal-pseudo tape recorder.

Notes: The name, indeed, comes from ancient Greek mythology since Proteo was a shapeshifter who could assume whatever shapes he preferred. In this way, our Proteo, has not a precise sound on its own but a clever mechanism that permits to acquire and transform every signal into waveforms. What if you can use your envelopes, LFOs or any other signal as a sound source?

What sets it apart from other oscillators? What's very different in Proteo is its internal pseudo-tape recorder, which is capable of continuously acquiring and transforming any external signal into waveforms and morphing them from a basic sine.

In Proteo, waveforms are not a static digital representation of a sound; they can continuously evolve in a very organic way, and tape loop time is a fundamental factor: changing it will drastically affect the resulting output even with the same sources at the inputs. Slowing down the time will capture a bigger portion of the incoming source with more harmonics. As a result, increasing it allows to capture up to low audio rate signals or really small fragments of the signal.

Exploring the interaction between Proteo, the sources and the time will force you to change your mind about how sounds and harmonics can be generated: visualizing how different shapes can sound and looking for new sources to generate YOUR waveform is the fundamental idea behind Proteo.

Proteo is also stereo, thanks to the Span knob you can easily detune one oscillator from the other to create nice stereo effects. Beside the common pitch the two oscillators have independent acquisition paths and morph controls, each one can emit different waveform.

est. release 25 Apr 25 $436.45

(No payment required now - pay when released)

FORTHCOMING

Related products...

Clank Toolbox Problem Solver/Ideas Enhancer Module (utility synth module)

Clank

Cat: 1084207 Rel: 25 Apr 25

Utility module - 12HP

Notes: Toolbox is the newest essential utility module for your modular system. It's designed to summarize and replace all those necessary small one-function modules, often overlooked due to their space and cost requirements. With a compact 12hp design, it offers a comprehensive selection of carefully curated blocks to expand and enhance the potential of every patch. The module is also specifically designed for internal interaction, allowing the combination of various basic blocks to achieve compelling outcomes, from complex rhythm creation to unusual sound shaper. Every system needs a Toolbox!

Since VCAs are always not enough, the first two blocks on the top row consist of two linear and very fast VCAs, which are also great for AM modulation. They are arranged from left to right: input (DC coupled), control voltage input (ranging from 0 to 8V), and output. The two inputs and control voltages are normalized from left to right, facilitating easy stereo operation. These VCAs, designed primarily for voltage attenuation, are versatile tools that excel in scenarios requiring linear response. With audio, their true strengths shine when applied to amplitude modulation (AM) scenarios, where the benefits of linear control become quite significant. Although they are optimized for AM and voltage control, using exponential envelopes with these VCAs can transform them into two highly effective and fast VCAs for audio applications.

The threshold CV (0-8V) is crucial for the functionality of the blocks labeled with an asterisk (*): AND/OR gates, sequential switches, and flip-flops. By default, the threshold for each block (the voltage that must be reached at every input for the circuit to operate) is set very low, allowing almost any positive signal to be used. By increasing the threshold with an external voltage, you will change the point at which the circuits marked with the * begin to operate. This may seem a little tricky at first, but once you master all the functionality of the Toolbox, the Threshold CV rarely found in other Eurorack modules will open up many more possibilities!

Still composed of two identical parts, the second and third rows contain two blocks of two-channel summing (A & B). This region offers many ways to combine two signals. From left to right, input A, B, SUM out inverted SUM out, and two Boolean operators: AND/OR While any input signal can be used here, the first two outputs are primarily intended for audio sources. In contrast, the Boolean outputs are more suitable for summing gates and logic signals. This setup also allows for the use of both logic and analog signals together; don't hesitate to experiment with Boolean operators using analog or audio signals.For example, connecting two different LFOs to the input of the summing section can create many gate rhythms from the two Boolean outputs by varying the threshold with external voltages.

Summing mixers/Mult Out: This section consists of two 3-input summing mixers connected in series: the output of the upper mixer is routed to the first input of the lower mixer, allowing you to combine a total of five signals with two outputs available. To break this connection, insert a patch cable into the first input of the lower mixer. This action separates the two sections, enabling you to sum two sets of three signals each. Additionally, the lower section includes a multed output by default.

A bidirectional sequential switch is located at the center of the module and labeled with three "I/O" tags. This often overlooked component allows for a wide range of functions, from the most practical to the most creative. When a voltage exceeding the threshold level is applied to the * input, the switch connects the upper left jack to the lower right one. If the voltage is below the threshold, the lower left jack is connected instead. Being bidirectional, each I/O can function as both an input and an output, enabling a 2:1 or 1:2 configuration. Try using the switch at audio rate; this can function as a versatile oscillator waveform shaper. Think of something other than this block as a simple channel switcher!

On the right side of the sequential switch, we have a more classic block: the flip-flop. This block outputs a square wave at half the frequency of any signal applied to the input, whether audio or gate. Two flip-flops are available, which can be used individually or normalized in series. This block is handy for creating sub-octaves of square format from any sound or as a clock divider.

Offset / Attenuverters: Located at the bottom are two offset and attenuverting channels.This section comprises two identical blocks that can easily attenuate, invert, and offset any input signal. Each block features an input jack, one output, and two small knobs. The first knob functions as an attenuverter, allowing you to invert and scale the signal at the same moment. The second knob, the offset, adds a static voltage of +/-0-8V to the resulting output. This functionality is crucial when seeking a more refined control over voltage or a signal. Without any signal at the input, you can use the offset knob as a manual control generator for any control voltage (CV) in your system. For example, try to change the threshold with it.

est. release 25 Apr 25 $226.50

(No payment required now - pay when released)

FORTHCOMING

Related products...

Cre8audio Boom Chick Pure Analogue Drum Machine (drum machine)

Cre8audio

Cat: 1081031

Analogue drum machine offering a wide range of sonic possibilites and a tactile user experience.

Notes: Introducing Boom Chick, a revolutionary analog drum machine built on the warmth and character of Pittsburgh Modular's newly designed analog drum circuits. These powerful, expressive percussion voices are paired with an advanced sequencer designed for intuitive creativity and deep rhythmic exploration. Inspired by the hands-on performability of iconic analog drum machines, Boom Chick redefines analog percussion with exceptional flexibility and sonic precision, tailored for modern musicians and producers.

Compact yet incredibly powerful, the Boom Chick ensures frustration-free jamming and tweaking through its intuitive knob-per-function layout and straightforward interface conventions. It's hands-on, immediate, and built for musicians who want a drum machine that feels alive. Turn up the dirt, push the limits, and make some serious noise.

Created by the Pittsburgh Modular Synthesizers team, Boom Chick features five meticulously crafted drum voices, each designed for maximum flexibility and expressiveness. The sounds are raw, dynamic, and laser sharp, built to drive and slice through any mix. The electricity creating the analog sounds is directly shaped using the knob-per-function interface. No menus, no hassle, just pure, tactile beat-making analog magic at your fingertips. By focusing on creative, new analog designs, Pittsburgh Modular ensured that Boom Chick doesn't just mimic the past, but kick starts a new future of analog beats.

Every voice has been meticulously engineered for maximum sonic impact, making Boom Chick a true drum synthesizer, not just a drum machine. Starting with a massive bottom end, the Kick drum sculpts a specialized sine-wave oscillator using gritty overdrive, pitch manipulation, and a precise, percussive envelope allowing you to dial in everything from low and long or clean and punchy rhythms to aggressive, overdriven beats. The Snare drum showcases the power of modern analog with powerful snare hits that can mimic a physical snare drum or venture into creative new territories. Drum channels 1 and 2 offer even deeper sound-design possibilities. By utilizing two oscillators, wave shaping, frequency modulation, and noise you can generate everything from subtle nuanced percussion to wild, expressive sonic textures. Toms, claps, snares, kicks, cymbals, rim shots, cowbells, congas, claves, space sounds, and outer space sounds can all be dialed in and reimagined. Hats utilize a custom oscillator noise matrix to create crisp, bright metallic tones ideal for intricate rhythmic patterns.

Boom Chick's sequencer is designed to offer profound depth while maintaining intuitive simplicity. It features two powerful modes: Step Mode, for meticulous programming of each drum step, and Live Mode, allowing real-time rhythm creation and expressive performance. Tools such as Step Shift enable quick and precise timing adjustments for intricate rhythmic patterns, while Step Roll and Chance introduce engaging complexity and variation. Timing functions like Humanize, Swing, and Quantize provide refined control over groove and rhythm, allowing for perfectly locked or naturally loose-feeling sequences. Swing adds groove by shifting even steps slightly behind the beat, while Humanize introduces subtle timing variations to simulate natural playing styles. With up to 64-step sequences and polyrhythm capabilities, Boom Chick encourages experimentation by removing the boundaries to live performance and making beats.

At the heart of Boom Chick is a 6-track sequencer that gives you deep rhythmic control while staying easy to use. With design inspiration taken from Pittsburgh's Voltage Research Lab 2, Boom Chick's sequencer will take you from quick jams to mind-bending polyrhythms. This sequencer is not only designed to keep up with you, but also propel you to new territory.

Boom Chick is modular-friendly, MIDI-capable, and performance-ready. This makes it a perfect addition to any studio or live rig. Individual trigger inputs and individual drum outs allow each drum to be sent to a mixer or DAW separately for external processing or recording. MIDI in and out to send and receive clock, trigger drums, or sequence external percussion. Analog clock in and out allows Boom Chick to easily integrate with Eurorack setups and other gear. Separate Line and Headphone outputs make personal jams, recording, or live performances easy.

coming soon $303.86

(No payment required now - pay when released)

FORTHCOMING

Related products...

Cre8audio Assembler Vintage Analogue Audio Mixer (studio mixer)

Cre8audio

Cat: 1081038 Rel: 25 Apr 25

A synth-focused vintage style audio mixer for the studio.

Notes: Introducing Assembler, a synth-focused audio mixer meticulously engineered to deliver unmatched vintage mixing console sound and intuitive, hands-on control. Developed in partnership with the renowned Pittsburgh Modular Synthesizers team, Assembler builds on the rich history and sonic warmth of classic analog audio mixers while embracing a modern workflow designed specifically for contemporary electronic artists.

The idea behind Assembler was not only to provide a super flexible tool for mixing live or in the studio, but also to provide a sound sculpting tool that could add depth, complexity, and with its special Pittsburgh-designed circuits, help you even to sound better!

Inspired by the sound of iconic analog consoles that shaped decades of music production, Assembler captures the essence of vintage mixers famed for their warmth, character, and dynamic response through tonal shaping and analog tape saturation emulation. These custom circuits, meticulously engineered for Assembler by Pittsburgh Modular utilize signal contouring and soft compression to unify the overall mix. This process emulates the signal chain cherished in vintage recordings, adding the warmth, cohesion, and character that other mixers often lack. The result is a better sounding modern electronic music mixer.

Assembler's ten audio inputs are split into three distinct mixer channel types to seamlessly integrate with various audio scenarios and workflows, however all ten channels have several features in common. Each input includes a powerful preamp capable of up to 20x gain boost, ideal for boosting line level signals, subtle clarity enhancement, or aggressive signal saturation. Three assignable aux sends add flexible audio processing options to each channel. Three segment LED meters, independent headphone Cue, and channel Mutes allow for precise and comprehensive monitoring. Channel 1 and 2 add extensive tonal control with vintage-inspired high and low EQ knobs, each offering i15 dB of boost or cut while all six mono inputs include a dedicated pan control. Two sets of stereo inputs take advantage of the powerful preamps and assignable aux sends to work with both Eurorack and line level signals. This allows for seamless integration of a wide variety of electronic instruments.

The Assembler offers significant flexibility with its three assignable aux send channels, allowing effortless integration of external effects like reverbs and delays or functioning as sub-mix channels. Specifically, two stereo returns and one mono return, each with independent gain adjustments (up to 2.7x gain), enable both creative experimentation and professional-grade signal blending.

Assembler prioritizes ease of use with its intuitive one-knob-per-function design. Every feature, EQ adjustment, auxiliary routing, panning, or level setting, is immediately accessible, providing a seamless, frustration-free mixing experience. Users new to audio mixers will appreciate its straightforward operation, while seasoned artists will instantly feel at home with familiar analog mixer functionalities clearly laid out.

Equally adept at managing both line-level instruments and modular signals, Assembler effortlessly integrates into any studio or live performance setup. A dedicated headphone output with a separate cue mix ensures detailed and reliable monitoring in live situations, enabling performers to preview and adjust their sounds confidently.

Assembler purposefully eliminates extraneous features found in many modern modular mixers, focusing solely on superior audio quality, intuitive user experience, and robust reliability. The result is a professional-quality audio mixer that offers an exceptional analog sound experience at a significantly accessible price point compared to competing products.

Assembler continues this tradition by seamlessly blending revered analog sound processing with modern modular flexibility, and it will also self-oscillate for all the noise artists, if that is important.

est. release 25 Apr 25 $303.86

(No payment required now - pay when released)

FORTHCOMING

Related products...

Digitech MonoNeon Whammy Pitch Shifter Effects Pedal (pitch shifter effects pedal)

Digitech

Cat: 1069471

The MonoNeon Whammy delivers mind-blowing pitch manipulation for guitar and bass alike.

Notes: Make your music Hypersonic

Send your tone soaring with the HyperSonic 3-octave pitch rise.

New octaver blend modes

Create never-before-heard sonic textures with new octaver blend modes.

MIDI-capable

Ready to integrate with advanced performance rigs with support for 5-pin MIDI control.

Artist-inspired design

Unique artwork and signature style make the MonoNeon Signature Whammy a bold addition to your pedalboard.

The DigiTech MonoNeon Whammy pedal goes where no whammy pedal has gone before, with new octave blend modes and up to 3 octaves of HyperSonic pitch shifting. Developed in collaboration with trailblazing bassist MonoNeon, the MonoNeon Whammy delivers mind-blowing pitch manipulation for guitar and bass alike.

Included in the box:
MonoNeon Whammy Pedal
Power Supply
User's Manual
2 Guitar Case Stickers
Warranty Registration Information Card
Special MonoNeon Customizing Kit

> Gaffer's Tape - Neon Yellow & Neon Orange
> Mini Permanent Marker

Specifications

Input / Output
Instrument Input Type: Unbalanced 1/4" TS phone jack
Max Input Level: +5 dBu
Input Impedance: 1 MO
MIDI Input: 5-Pin DIN
Output Type: Unbalanced 1/4" TS phone jack
Max Output Level: +10 dBu
Output Impedance: 1 kO

Electronics

Frequency Response: 20 Hz to 20 kHz
Signal to Noise Ratio: >105 dB (A-weighted): ref = max level, 22 kHz bandwidth
THD: 0.004% @ 1 kHz; ref =1 dBu w/ unity gain
Sample Rate: 44.1 kHz
A/D Conversion: 24-bit
D/A Conversion: 24-bit

Physical

Dimensions: 6.5" (16.51cm) x 7.75" (19.68cm) x 2.5" (6.35cm) (WxDxH)
Shipping Weight: 3.8 lbs. (1720g)

Power
Power Consumption: 2.4 W (265 mA @ 9VDC)
Power Requirements: 9 VDC External Adapter (center negative)
Included Power Adapter: PS0913DC (9V DC @ 1.3 A) center negative

coming soon $297.23

(No payment required now - pay when released)

FORTHCOMING

Related products...

Doepfer A-145-2 LFO Low Frequency Oscillator Module (slim line series) (LFO synth module)

Doepfer

Cat: 1081646

Module A-145 is a low frequency oscillator, which produces cyclical control voltages in a very wide range of frequencies

Notes: Module A-145 is a low frequency oscillator, which produces cyclical control voltages in a very wide range of frequencies.

Five waveforms are available: sawtooth, inverted sawtooth, triangle, sine and square wave. The LFO can be used as a modulation source for any number of modules - for instance modulating the pulse width or frequency of a VCO, modulation of the cut-off frequency of a VCF, or amplitude modulation with a VCA.

A three-way switch lets you select three frequency ranges, spanning from one cycle every several minutes at the lowest, to moderate audio frequency at the highest (about 4-5 kHz).

The LFO signal can also be synchronised, via the reset input.

Identical to the A-145-1, but only 4 HP wide and with additional LEDs for the square wave and the sawtooth signal.

Power consumption: 30mA at +12V and 20mA at -12V
Depth: 45mm
4 HP

coming soon $104.97

(No payment required now - pay when released)

FORTHCOMING

Related products...

Doepfer A-119-2 Dual External Input/Amplifier Module (amplifier synth module)

Doepfer

Cat: 1081647

Module A-119-2 is a Dual external input amplifiers with only 4HP module width

Notes: Module A-119-2 is a Dual external input amplifiers with only 4HP module width. The module contains two amplifiers with separately adjustable amplification levels. Each channel is equipped with an overload display. The module can also be used for stereo signals, e.g. the stereo output of a smartphone.

Controls and displays:

Level 1/2: manual control of the amplification in the range 0 - about 45.
Overload 1/2: overload LED, begins to light up for output levels beyond about 10Vpp (+/-5V)
In 1: audio input 1 (monophonic or stereophonic, see technical details)
In 2: audio input 2 (monophonic)
Out 1/2: audio output (monophonic)

Technical Details:

For higher amplifications the two amplifiers can be daisy-chained
Different normallling options are available via the rear of the modules with jumpers.
All inputs and outputs are DC coupled. Thus the module can be used also for the amplifications of control voltages.

Power consumption: 20mA at +12V and 20mA at -12V
Depth: 30mm
4 HP

coming soon $65.19

(No payment required now - pay when released)

FORTHCOMING

Related products...

Doepfer A-149-3 Fluctuating Random Voltages Module (random synth module)

Doepfer

Cat: 1081649

Based on the homonymous "Fluctuating Random Voltages" by Buchla, with more functions added

Notes: A-149-3 is the third module of the A-149-x range. In this group, this module present several functions of Don Buchla's "Source of Uncertainty 265/266" (SOU) modules that cannot be realized with existing A-100 modules. Some functions of Buchla's 265 and 266 SOU can be realized with existing A-100 modules.

Module A-149-3 is based on the homonymous "Fluctuating Random Voltages" by Buchla. Compared to the historic original, a lot of functions have been added. For example the user has access to virtually all internal signals (e.g. Noisy Triangle or S&H) and there are a lot of adjustable parameters which were fixed in the original.

For example, the frequency and noisiness of the internal triangle oscillator, the correlation of the S&H and manual or automatic frequency control of the S&H clock oscillator. The fixed internal connections of the original are wired to sockets in the A-149-3 and can be used also individually as the connections of the original are realized as normalled sockets. That way e.g. the S&H or slew unit can be used independent from the other units.

The functions in detail:

As in the original a digital noise signal is filtered in three different ways. The three "noise flavours" are available at three sockets and can be used for all kind of noise applications:

+3db (+3dB per octave, a bright noise, also called blue noise)
-3dB (-3dB per octave, a dark noise, also called red or brown noise, Allan Strange calls it "reciprocal white noise")
Flat (flat spectrum, also called pink noise)

In the original the -3dB output is used add some noise to an internal triangle oscillator with fixed frequency (~ 100 Hz) and fixed "noisiness". The result is called "noisy triangle". In the A-149-3 the frequency of the triangle oscillator and the level of the noisiness can be adjusted. The frequency is adusted by means of the Frq. control and the Range switch (~ 110Hz ... 5 seconds period in position high). In addition one can select between the -3dB and Flat output as noisiness source by means of an internal jumper. When Noisiness control is fully CCW one obtains a clean undisturbed triangle signal. With Noisiness control fully CW the result is a triangle signal with a lot of noise or randomness. The noisy triangle signal is available at the socket "N Tri" and is displayed with a dual colour LED.

The "N Tri" signal is normalled to the signal input of the subsequent Sample&Hold unit (S&H). The clock signal for the S&H is generated by an internal rectangle oscillator. This signal is normalled to the S&H clock socket and is displayed by an LED. One can select between manual and automatic control of the clock period by means of a toggle switch. In position "man." the period is controlled manually by the "Period" control. With control "Period" fully CCW one obtains the shortest period or highest frequency. Turning the control up increases the period or lowers the frequency. In position "auto" of the switch the period is controlled by the slew unit.

In this position a vactrol is used to define the frequency of the S&H clock. This vactrol is controlled in the same way as the vactrols of the slew unit, i.e. the period of the S&H clock changes simultaneously with the slew time. In the historic original only the auto mode was available. There was no manual control available.

The S&H has another special feature: the Correllation control. It's a feedback function where shares of the S&H output are fed back to the S&H signal input and mixed with the actual S&H input signal. The result is slurring the signal like a sub-audio lowpass filter, kind of a "digital slew function" because the gradation of the signal persists.

The S&H output is availabe at the corresponding socket and is displayed with a dual colour LED.

The S&H output is normalled to the signal input of the subsequent Slew Limiter unit (SL). The core of the slew limiter are two vactrols (vactrol = combination of a light emitting diode/LED and a light dependent resistor/LDR built into lightproof case). The brightness of the vactrol LEDs can be controlled manually (control "Man." of the slew unit) and by an external control voltage (socket "SL CV" with associated attenuator "CV" of the slew unit). The brightness of the vactrol LEDs is displayed at the top of the front planel. As already mentioned a third vactrol can be used to control the frequency of the S&H clock oscillator simultaneously to the slew limiter. The SL output is availabe at the corresponding socket and is displayed with a dual colour LED.

Due to the access facilities to many of the internal signals and connections it's possible to use the sub-units also for other applications. E.g. the noisy triangle signal, the S&H unit (incl. correlation) or the SL unit can be used for other signals. The S&H clock can be applied also from outside to synchronize the S&H to other signals.

If required, the internal clock signal is available at a pin header of the pc board.

Controls, Switches and Displays:

Slew Unit

Man.: manual adjustment of the slew time

CV: attenuator for the SL CV input

LED: display of the slew function (bright = short slew lime, dark = long slew time), identical to the brightmess of the vactrol LEDs

Triangle LFO

Frq.: LFO frequency, range ~ 110 Hz ... 5 seconds period

Noise: adjustment of noisiness (= perturbance of the triangle signal)

+3dB/-3dB: switch for the source of noisiness

LED: display of the noisy triangle signal, dual color LED (rot = positive / yellow = negative output voltage)

Sample&Hold (S&H)

Period: period of the internal clock signal for the S&H unit, fully CCW = shortest period or highest frequency, fully CW = longest period or lowest frequency

LED: display of the internal clock signal

Correl.: adjustment of the correllation of the S&H unit

Man./Auto: switching between manual and automatic control of the clock frequency, when auto is selected the clock frequency is controlled by the slew unit

LED: display of S&H output, dual color LED (rot = positive / yellow = negative output voltage)

Slew Limiter (SL)

LED: display of SK output, dual color LED (rot = positive / yellow = negative output voltage)

Sockets:

+3dB : filtered digital noise with +3dB per octave (output)

-3dB : filtered digital noise with -3dB per octave (output)

Flat : flat noise output

N Tri : Noisy Triangle output, about 10Vpp (-5V ... +5V)

S&H In: S&H signal input, normalled to N Tri

S&H Out : S&H signal output

SL CV: control voltage of the slew limiter unit, connected to the corresponding attenuator "CV" of the slew unit

S&H Clk: clock input of the S&H unit, normalled to the internal clock oscillator

SL In: slew limiter input, normalled to S&H Out

SL Out : slew limiter output

The arrow symbols indicate the normalling of sockets. Outputs are inverse labelled.

Technical details:

Frequency range of the triangle LFO: about 110 Hz ... 5 seconds period
Output level of the triangle LFO: ~ 10 Vss (-5 V...+5 V)
Frequency range of the internal clock oscillator: about 3 seconds ... 30Hz
Output level of the internal clock oscillator: ~ 10 Vss (0 V...+10 V)
Required input level of the S&H clock input: +5V

Depth: 45mm
8 HP

coming soon $248.61

(No payment required now - pay when released)

FORTHCOMING

Related products...

Dreadbox Artemis 6-Voice Polyphonic Analogue Synthesiser (analogue desktop synthesiser)

Dreadbox

Cat: 1054559

6-Voice Polyphonic Analogue Synthesiser

Notes: Artemis is a unique analogue polysynth with a UI inspired by Dreadbox's award-winning Typhon synthesizer. It builds on Typhon's innovative concepts, adding six voices of polyphony, powerful modulation capabilities, stereo FX, voice spreading, and much more!

From classic polysynth tones to aggressive modern sounds and everything in between, Artemis has a wealth of raw synthesis and modulation capabilities to explore.

At its core, Artemis features a fully analogue architecture, based on the smart oscillator implementation found in both the Typhon and the Murmux Adept, allowing effortless transitions between multiple waveforms, mix settings, glide, FM, and more.

These VCOs are paired with Dreadbox's signature filter topology, offering classic 12dB or 24dB per octave low-pass modes, as well as a standalone resonant high-pass filter. The low-pass filter includes dedicated filter frequency FM control for dialling in edgier, modern tones.

Two multi-mode LFOs enhance the modulation possibilities: LFO 1 offers a unique fade-in parameter, while LFO 2 includes XMOD (cross-modulation) control for chaotic, brash textures. Each LFO has multiple waveforms and can modulate pitch, filter cutoff, VCO waveform, pulse width, and more.

This analogue powerhouse is complemented by a suite of world-class FX from Sinevibes, who previously collaborated with Dreadbox on Typhon's FX. With reverb, delay, modulation effects, master distortion, and more, Artemis delivers an extra dimension to your sounds.

coming soon $1,220.93

(No payment required now - pay when released)

FORTHCOMING

Related products...

Embodme Erae II Polyphonic MIDI Controller & Looper (MIDI controller/looper)

Embodme

Cat: 1018998

Notes: Unlock Limitless Creativity.

Experience the power and versatility of the ultimate MIDI Controller & Looper. Take control of your music like never before.

Redefined sensitivity.

ERAE II reacts from the lightest touch to the fastest strokes, pushing the dynamics to the extreme possible range of musical articulation. Embedding 16.000 force sensors, ERAE II benefits from our patented Force Multi-Touch technology, which offers ultra-responsiveness, down to a very low threshold force.

The most playable surface yet.

ERAE II benefits from 3 years of R&D with our patented Force Multi-Touch technology sensing just a few grams of pressure on a very large playable surface.

A sub-millimetre XY precision both in relative and absolute mode with enhanced sensor linearity for ultra-stable and continuous finger slides.

Complete musical articulation.

Add polyphonic portamentos, slides and after-touch to your musical creative process.

Control multiple sound parameters with a single touch and explore new possibilities on your favourite synthesizers.

Expressive looping.

Record segments of music and play them back with ERAE II's 8-track looper. You can define duration, quantization and BPM, overwrite and overdub expressive features.

Every gesture recorded on the fly is replayed visually, creating a show for the eyes.

Here it is in action: quickly recording a base line then adding a drum sequence. Stop the recording and jam on top of your loops.

Modular mastermind

Multi-dimensional connectivity.

ERAE II features 24 (12 dual) configurable analogue outputs, to be used as CV/Gate, drum triggers, and bipolar modulation CV controls. Bring life to your modular patches, and record intricate loops to be played back on any CV!

Different skins.

ERAE II features a unique skin that connects the sensors to your fingers. This material is designed to provide the perfect gliding sensation, with just the right amount of softness and the organic feel of fabric.

This skin can be replaced in just a few minutes. Our Kickstarter backers will receive a second skin made of black silicone.

Expressive Controller Looper

Erae Touch is a polyphonic MIDI Controller & Looper.

Designed for immersive live performances it will enrich your musical composition and become the master device to control all your hardware synthesizer, modular gear and software instruments.

Built with unrivalled sensitivity and offering infinite configurability.

User-friendly configuration

No more back & forth menu diving.

Setup the tempo, set your scales and launch loops from the settings section with ease thanks to the backlit buttons, the LCD screen and the selection click wheel embedded in the top right hand corner.

The ERAE Lab

Create your own layouts with the free companion software ERAE Lab. It's a simple yet powerful creation software: elements, MIDI settings and styles can be defined and tested in just a few clicks.

ERAE Lab now enables seamless layouts and project management. Drag existing layouts from a project to the compose panel. Browse your project library and pick layouts to create new ones in a few clicks.

Customize your interface with musical elements such as isomorphic keygrids, keyboards, or control elements with fader and buttons.

An open canvas.

This is an open canvas for the most daring. The API is a custom sysex library with messages enabling you to take full control of the ERAE II detection points and LEDs states. (You can already download the full API Documentation here).

A new kind of arpeggiator.

Explore the arpeggio's parameters in 3D. All the arpeggiator parameters (rate, octave range, note length, pattern, steps, velocity) can be mapped to expressive gestures (after touch, slide, portamentos).

Use the aftertouch control to modulate the rate while sliding the same finger to bend the note. Push it even more with MPE!

What's in the box:

Erae Il MIDI Controller & Looper
A Set of 2 skin with fabric and silicon material
60W USB power supply
2x USB cables (Power and MIDI data)
1x MIDI-TRS cable

coming soon $893.88

(No payment required now - pay when released)

FORTHCOMING

Related products...

Enjoy DeFeel Modular Monotony Degenerator Standalone Sequencer Manipulator (audio sequencer manipulator)

Enjoy Electronics

Cat: 1078325

The first sequencer manipulator to generate autofills using lines and vectors.

Notes: With DeFeel Enjoy Electronics have redesigned and applied the Fill concept to make it usable in the world of modular synthesizers.

This device is designed to break the chain between the sequencer and everything that comes after it, allowing you to intervene at the right time and create unique variations.

A modular device that's not going to generate anything, but is created to degenerate the monotony.

DeFeel isn't about complex button presses or cryptic menus. Here, creativity reigns supreme. Design your rhythmic patterns with an intuitive touch. Simple lines and vectors come to life on the multitouch display, allowing you to experiment and craft unique sequences with remarkable ease.

With DeFeel, we offer musicians and performers a powerful and versatile tool to enrich their performances and compositions. With its intuitive programming, sleek design, and innovative translucent panel, DeFeel stands out as a unique device poised to revolutionize the way modular synthesizers are used and perceived.

coming soon $529.26

(No payment required now - pay when released)

FORTHCOMING

Related products...

Fluid Audio C35BT Active 3.5" Two-Way Studio Reference Monitors (pair) (wireless studio monitors)

Fluid Audio

Cat: 1082826

Engineered to deliver precise audio with a balanced and flat frequency response

Notes: Compact Size, Big Performance - The Perfect Creative Companion

Meet the Fluid Audio C35BT, a compact yet powerful studio monitor pair designed for creators who need high-quality sound in limited spaces. With accurate sound reproduction, versatile connectivity, and a sleek design, the C35BT offers a professional audio experience for musicians, content creators, and casual listeners alike.

Precision Sound in a Compact Form Factor

Despite its small size, the C35BT is engineered to deliver precise audio with a balanced and flat frequency response from 80Hz to 20kHz. Unlike many small-format monitors in this price range, which tend to boost bass or high frequencies, the C35BT maintains a neutral tonal balance, making it ideal for detailed listening and mixing in tight spaces.

Front-Panel Volume Control and AUX Input

Convenience is key when working in fast-paced environments. The C35BT's front panel features:

Volume control for quick adjustments without reaching behind the speakers
AUX input for instant connection to smartphones, tablets, or other portable devices
BT 5.0 Connectivity
Seamlessly stream high-quality audio wirelessly with BT 5.0. Whether you're referencing mixes or simply enjoying music, you can switch effortlessly between BT and wired inputs with minimal latency and no loss in audio fidelity.

Auto-Standby Mode with Manual Override

Designed to save energy without interrupting workflow, the C35BT automatically enters standby mode after 5 minutes of inactivity. For uninterrupted use, the auto-standby feature can be disabled via the rear-panel switch, offering flexibility depending on your setup.

Versatile Connectivity Options

Whether you're using professional audio equipment or consumer devices, the C35BT offers multiple input options to suit any setup:

"Balanced TRS inputs for pro-level audio interfaces
"Unbalanced RCA inputs for consumer electronics
"Front-panel AUX input for quick and easy device connection
"BT5.0 for wireless streaming without compromise
Advanced Features for Every User

Class D Amplification: Delivering 32W per speaker, the C35BT provides clean, distortion-free sound even at high volumes.

3.5" Composite Woofer + Silk Dome Tweeter: This combination ensures detailed mids, tight bass, and smooth high-frequency response.

Compact and Portable Design: With a footprint of just 125mm x 150mm x 185mm, the C35BT is perfect for desktop setups, home studios, or mobile creative spaces.

Rubber Feet Included: Designed to reduce vibrations and improve sound clarity by providing a stable base on any surface.

Recommended Use Cases

Music Production: Ideal for producers needing accurate sound representation.
Content Creation: Perfect for YouTubers, podcasters, and streamers who require professional audio monitoring.
General Listening: Whether wired or via BT 5.0, the C35BT offers exceptional clarity for casual music listening.

What's Included
1 x Active C35BT speaker
1 x Passive C35BT speaker
Speaker connection cable
Power cable
4 x Rubber feet
User manual

Additional information

Woofer: 3.5" composite cone
Tweeter: 0.8" silk dome tweeter
Frequency response: 80Hz-22kHz (+/- 3db)
Crossover frequency : 4.2kHz
Amplifier Power: 2 x 32 watts (64W total)
Mains Voltage Input: 85 VAC to 265 VAC universal
Protection: RF interference, output current limiting
Over temperature
Turn-on/off transient
Subsonic filter
External mains fuse

Cabinet: Vinyl-laminated MDF
Size (single monitor): 7.28" x 4.92"

coming soon $131.49

(No payment required now - pay when released)

FORTHCOMING

Related products...

Fluid Audio C50BT Active 5" Two-Way Studio Reference Monitors (pair) (wireless studio monitors)

Fluid Audio

Cat: 1082827

The Fluid Audio C50BT studio monitors are crafted for music producers, audio engineers, and serious enthusiasts seeking accurate sound reproduction without compromise

Notes: Precision Meets Versatility - Designed for Creators, Perfect for Any Space

The Fluid Audio C50BT studio monitors are crafted for music producers, audio engineers, and serious enthusiasts seeking accurate sound reproduction without compromise. Compact yet powerful, the C50BT offers a feature set typically found in more expensive monitors, making it the ideal choice for near-field monitoring in studios or home setups.

Flat Frequency Response for Critical Listening

Unlike many other monitors in this price range, the C50BT delivers a flat and neutral frequency response. This ensures you hear your audio as it truly is, making it easier to make accurate mixing and mastering decisions. Competing models often color the sound, but the C50BT maintains the balance and clarity professionals demand.

Convenient Front-Panel Controls and Inputs

The C50BT's front panel provides instant access to the most important controls:

Volume knob: Easily adjust your listening level without reaching behind the speaker.
Input selection: Switch seamlessly between multiple input sources, including wired and BT 5.0.
AUX input: A convenient front-panel AUX input lets you quickly connect devices like smartphones and tablets.
Auto-Standby Mode with Manual Override

Energy efficiency meets user control. The C50BT features an automatic standby mode, activating after periods of inactivity to reduce power consumption. If you prefer continuous operation, simply disable the feature using the rear-panel switch.

Versatile Connectivity for Any Setup

Whether you're connecting to professional audio gear or consumer devices, the C50BT has you covered:

Balanced TRS inputs for professional audio interfaces and mixers
Unbalanced RCA inputs for connecting to various consumer audio devices
BT 5.0 for high-quality wireless audio streaming
Front-panel AUX input for quick and easy device connections
Compact, Space-Saving Design

With dimensions of 175mm x 195mm x 256mm, the C50BT fits comfortably on any desk or small studio space.
The sleek, minimalist design ensures it looks great in any environment while minimizing footprint.

Advanced Features for a Superior Experience
Balanced Subwoofer Output: Expand your low-end capabilities by connecting a subwoofer via the balanced sub-out. This makes the C50BT a scalable solution for those needing deeper bass.
High-Efficiency Class D Amplification: Delivering 42W per speaker, the C50BT ensures powerful, clean audio output without distortion, even at high volumes.
Precision-Engineered Crossover: The carefully tuned 3.4kHz crossover ensures smooth frequency transition between the woofer and tweeter, resulting in a well-balanced soundstage.
Premium Components: The 5.25" composite woofer and 1" silk dome tweeter are optimized for low distortion and accurate sound reproduction.
Rubber Feet Included: The included rubber feet help reduce vibrations and provide stability on any surface, improving overall sound clarity.

Recommended Use Cases
Music Production: Ideal for producers needing accurate sound representation.
Content Creation: Perfect for YouTubers, podcasters, and streamers who require professional audio monitoring.
General Listening: Whether wired or via BT 5.0, the C50BT offers exceptional clarity for casual music listening.

coming soon $186.73

(No payment required now - pay when released)

FORTHCOMING

Related products...

Gator 12x12" Thick Acoustic Foam Pyramid Panels (charcoal, pack of 2) (soundproofing foam)

Gator Cases

Cat: 1077905

Pair of 2" thick acoustic foam pyramid panels 12"x12"

Notes: Enhance your recording and listening experience by absorbing and controlling unwanted reflected noises. Each panel features a 2 inch thick, 12x12" pyramid design for maximum absorption.

coming soon $27.07

(No payment required now - pay when released)

FORTHCOMING

Related products...

Hexinverter Mutant BD9 Bass Drum Module (edition noire) (drum synth module)

Hexinverter Electronique

Cat: 1084894 Rel: 25 Apr 25

A combination of voltage-controlled distortion and the flavour of the TR-909 kick.

Notes: A combination of voltage-controlled distortion and the iconic flavour of the TR-909, Hexinverter's take on this iconic Bass Drum in modular format gives it more power, grit and flexibility

est. release 25 Apr 25 $227.60

(No payment required now - pay when released)

FORTHCOMING

Related products...

JHS Pedals 3 Series Tape Delay Effects Pedal (time effects pedal)

Artículos por página:
Mostrar pistas:
Hide played by

Filter

Cambiar de género

Switch view

My filters

Type

Equipment

Format

Brand

Featured

Price

Tags

Coming soon: Studio Equipment

Ayuda & Información

Departamentos

Mi Juno

100% Compra Segura

DJ Mag Best Of British

This website uses cookies

Cart subtotal: