100% Compra Segura

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Compra Segura

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Coming Soon: Studio Equipment

Inicio  Coming Soon  

Studio Equipment

Options
Artículos del 1 al 50 de 601 en la página 1 de 13
1  2  3  ...  13  »
FORTHCOMING
Audio Technica AT2020USB+ USB Large Diaphragm Condenser USB Microphone (chrome)
Cat: 783290 Rel: 31 Jan 21
 
Large USB diaphragm condenser microphone
Notes: The AT2020USB+ is designed for digitally capturing music or any acoustic audio source using your favorite recording software. The microphone offers the critically acclaimed, award-winning sound of the AT2020, with studio-quality articulation and intelligibility perfect for singer/songwriters, podcasters, voice-over artists, field recorders, and home studio recorders

Extremely Articulate Sound Reproduction
The AT2020USB+ features a built-in headphone jack with volume control that allows you to directly monitor your microphone signal with no delay. It also offers mix control that blends microphone and pre-recorded audio. The microphone's cardioid pickup pattern delivers excellent off-axis rejection, while its A/D converter with a 16-bit, 44.1/48 kHz sampling rate ensures extremely articulate sound reproduction.

Renowned Consistency
Audio-Technica's state-of-the-art design and manufacturing techniques ensure that the microphone complies with the company's renowned consistency and reliability standards.

Headphone mini-jack
The AT2020USB+ features a built-in headphone jack with volume control that allows you to directly monitor microphone signal with considerable amplification.

Powered by usb
The microphone is powered directly from your computer, via the USB port. A blue indicator light indicates that the microphone is working.

Table stand included
The AT2020USB+ comes with a table tripod, which keeps your microphone perfectly stable on your workspace.

AT8466 stand mount
The AT8466 stand mound is included and fixes onto the table stand. It enables the inclination of the AT2020USB+ towards you.

Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 20 - 20,000 Hz
Power Requirements: USB Power (5V DC)
Bit Depth: 16 bit
Sample Rate: 44.1/48 kHz
Volume Control: Mix control; Headphone volume control
Weight: 386g
Dimensions: 6.38" (162.0 mm) long, 2.05" (52.0 mm) maximum body diameter
Headphone Output Power: 130 mW (at 1 kHz, 10% T.H.D., 32 ohm load)
Headphone Jack: 3.5 mm (1/8") TRS (stereo)
Output Connector:USB-type
Accessories Included: Pivoting stand mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch; tripod desk stand; 10' (3.1 m) USB cable
Read more
MRP:$220.92 SAVE 17%
coming soon $184.09
FORTHCOMING
Audio Technica AT2020 Large Diaphragm Condenser Microphone (chrome)
Cat: 783291 Rel: 31 Jan 21
 
Large diaphgragm condenser microphone
Notes: The AT2020 sets a new standard of performance and quality in studio condenser microphones at this price level. Its low-mass diaphragm is custom made for extended frequency response and superior transient response. With a very low intrinsic noise level, it is perfectly suited to current digital recording equipment. This microphone offers a wide dynamic range, and easily holds high sound pressure levels. Its rugged construction is designed to last for years.

Ideal for projects / home studio
At a very affordable price, the AT2020 is the best choice for a first cardioid condenser studio microphone, combining performance, quality, robustness and versatility.

High spl handling
Its high sound pressure level (144 dB) and exceptional dynamic range make the AT2020 particularly versatile.

Robust Construction
Technical design and advanced manufacturing ensure compliance with Audio-Technica's strict standards of consistency and reliability.

Cardioid capsule
The O16 mm made to measure diaphragm, provides superior transient response over the entire frequency range.

Very versatile
It is suitable for recording voice, instruments (percussion, piano, brass, winds, Leslie amp or guitar).

Swivel mounting
The AT8466 attachment comes with the AT2020 can be installed on a conventional microphone stand, or on a tripod.

Carry case
The AT2020 comes with a soft protective pouch for easy storage and transport.

Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 20 - 20,000 Hz
Open Circuit Sensitivity: -37 dB (14.1 mV) re 1V at 1 Pa
Impedance: 100 ohms
Maximum Input Sound Level: 144 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: 124 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio: 74 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 48V DC, 2 mA typical
Weight: 345g
Dimensions: 6.38" (162.0 mm) long, 2.05" (52.0 mm) maximum body diameter
Output Connector: Integral 3-pin XLRM-type
Accessories Included: Stand mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
Read more
MRP:$150.33 SAVE 17%
coming soon $125.27
FORTHCOMING
Audio Technica ATH-M50X Limited Edition Professional Studio Monitor Headphones (purple & black)
Notes: As the most critically acclaimed model in the M-Series line, the ATH-M50 is praised by top audio engineers and pro audio reviewers year after year. Now, the ATH-M50x professional monitor headphones feature the same coveted sonic signature, with the added feature of detachable cables. From the large aperture drivers, sound isolating earcups and robust construction, the M50x provides an unmatched experience for the most critical audio professionals.

Critically acclaimed M-Series professional monitor headphones deliver accurate audio and outstanding comfort, perfect for long sessions in the studio and on the go. Contoured earcups seal tight for excellent sound isolation, with minimal bleed. And the pro-grade materials are durable, yet comfortable. Find out why online reviewers, top audio engineers, and cult followers agree, M-Series is an unmatched combination of audio and build-quality that gets the job done. Hour after hour, year after year.

Type: Closed-back dynamic
Driver Diameter: 45 mm
Magnet: Neodymium
Voice Coil: CCAW (Copper-clad aluminum wire)
Frequency Response: 15 - 28,000 Hz
Maximum Input Power: 1,600 mW at 1 kHz
Sensitivity: 99 dB
Impedance: 38 ohms
Weight: 285 g (10 oz), without cable and connector
Cable: Interchangeable cables: detachable 1.2 m - 3.0 m (3.9' - 9.8') coiled cable, detachable 3.0 m (9.8') straight cable and detachable 1.2 m (3.9') straight cable
Accessories Included: Protective carrying pouch, 6.3 mm (1/4") screw-on adapter
Read more
MRP:$196.08 SAVE 17%
coming soon $163.39
FORTHCOMING
Soma Laboratory Pulsar-23 Organismic Drum Machine (black)
Cat: 781129 Rel: 31 Dec 20
 
analog synthesiser/drum machine
Notes: Pulsar-23 is a multi-functional analog synthesizer and generator of complex rhythmic patterns.

The Pulsar consists of 23 different modules, including four flexible sound generators with completely different structures, four envelope generators, four looper-recorders, a clock generator with dividers, a controlled chaos generator, an LFO, a two-channel CV-controlled effects processor, distortion, two controlled amplifiers, an inverter, a controlled inverter and two controlled analog switches. In addition to these 23 main units, the Pulsar also contains 13 auxiliary units, such as a four-channel MIDI to CV converter, a noise generator, four attenuators, two dynamic CV generators with sensory control, two impulse converters and single passive electronic components for live circuit bending.

Pulsar-23 can be used for the synthesis of percussion instruments and rhythms, bass and melodic lines, effects and sound landscapes, as well as a source of control voltage. The Pulsar functions in three different modes: stand-alone, MIDI control and CV control. Moreover, all the above features and control modes can work simultaneously in any proportion or combination. Additionally, Pulsar offers live circuit bending capabilities and the use of the artist's body conductivity to create patches and cross modulations.

Pulsar continues the line of organismic synthesizers begun by LYRA-8, but now in the area of percussion instruments.

Also, it has MIDI control and synchronization and a lot of smaller modules such as 4 assignable attenuators and 2 dynamic CV sensors for CV generation etc. In general, there are 55 knobs, 11 switches and over 100 inputs and outputs for patching, Eurorack integration, external mixing and processing, live circuit bending!

It comes in a special HQ bag with 30 alligator clips cables and PSU.
Read more
MRP:$2,091.52 SAVE 17%
coming soon $1,742.93
FORTHCOMING
Tangible Waves AE Modular 1-Row 12x1 Narrow Case
Cat: 786529 Rel: 31 Oct 20
 
1-row 12x1 narrow case
Notes: This 1-row rack for AE modular is 12 units wide; two of them are used by the MASTER module so you have 14U remaining for other modules.

Via a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

If you want your rack pre-installed by us, please add the mounting service to your order (module mounting (up to 16 modules) ).

The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.

Dimensions:31.1 x 11.2 x 4.5 cm (width x depth x height)
Read more
MRP:$32.68 SAVE 17%
coming soon $27.23
FORTHCOMING
Tangible Waves AE Modular QUANTIZER Automatic Musical Scales Module
Cat: 786489 Rel: 31 Oct 20
 
Quantizer module
Notes: The QUANTIZER takes four different CV inputs and processes them in a way that the CV values "snap" to the exact values so that oscillators controlled by the outputs of the module play the notes of a selected musical scale. With an encoder one of 16 scales can be selected and is displayed in a text display,

There are 4 independent channels that are quantized to the same selected scale.

As an additional feature, the module provides a trigger signal for each channel on every change on the output CV.

Finally, with a switch the scale selection can be "frozen" so there is no accidental change possible.

There are 4 independent channels that are quantized to the same selected scale.

Module power consumption: 15 mA

Inputs
CV 1 - accept CV for channel 1 of the quantizer
CV 2 - accept CV for channel 2 of the quantizer
CV 3 - accept CV for channel 3 of the quantizer
CV 4 - accept CV for channel 4 of the quantizer
Outputs
CV 1 - Quantized CV from channel 1 of the quantizer
CV 2 - Quantized CV from channel 2 of the quantizer
CV 3 - Quantized CV from channel 3 of the quantizer
CV 4 - Quantized CV from channel 4 of the quantizer
TRIG 1 - Gate signal on change of CV from channel 1 of the quantizer
TRIG 2 - Gate signal on change of CV from channel 2 of the quantizer
TRIG 3 - Gate signal on change of CV from channel 3 of the quantizer
TRIG 4 - Gate signal on change of CV from channel 4 of the quantizer
MULT - unbuffered multiple, unconnected from the module's circuitry
B. CV - CV signal from MIDI
Please note:

The notation of the outputs is slightly different on the panel than indicated here. There are two rows of identical outputs, side by side. For each output-trigger there is an activity LED, indicating a change in quantized CV.

Controls
SCALE Knob - selects the current scale. 16 scales are available, the selected scale will be displayed in the small display to the right of this knob
LOCK Switch - prevents accidental changes of the selected scale when activated
OFFSET Knob - Select from up to 12 notes from the well-tempered scale as base-value, depending on the scale selected. All left would be equivalent to a key of C
Please note:

Scale selection directly takes place when the SCALE Knob is turned, clicking it has no specific effect.

Available SCALES, as indicated on the display, are as follows:

Minor (e.g. equivalent to A-B-C-D-E-F-G in ‘A minor’)
Major (e.g. equivalent to C-D-E-F-G-A-B in ‘C major’)
Dorian (e.g. equivalent to C-D-Eb-F-G-A-Bb in ‘C Dorian mode’)
Phrygian (e.g. equivalent to C-Db-Eb-F-G-Ab-Bb in ‘C Phrygian mode’)
Lydian (e.g. equivalent to C-D-E-F#-G-A-B in ‘C Lydian mode’ )
Mixolyd [Mixolydian] (e.g. equivalent to C-D-E-F-G-A-Bb in ‘C Mixolydian mode’ )
Locrian (e.g. equivalent to C-Db-Eb-F-Gb-Ab-Bb in ‘C Locrian mode’)
Gypsy (e.g. equivalent to C-D-Eb-F#-G-Ab-B in ‘C Hungarian minor scale’ )
Whole (equivalent to C-D-E-F#-G#-A# or B-Db-Eb-F-G-A as ‘Whole tone scales’)
Pent Min [Pentatonic Minor] (e.g. equivalent to C-Eb-F-G-Bb in ‘C Minor pentatonic’)
Pent Maj [Pentatonic Major] (e.g. equivalent to C-D-E-G-A in ‘C Major pentatonic’)
1-3-5 (e.g. equivalent to C-E-G in ‘C’)
1-3-4 (e.g. equivalent to C-E-F in ‘C’)
Fifth (e.g. equivalent to C-G in ‘C’)
Octave (e.g. equivalent to C in ‘C’)
Chromat (The 12 welltempered notes of the chromatic scale)
Read more
MRP:$77.12 SAVE 17%
coming soon $64.26
FORTHCOMING
Tangible Waves AE Modular Case Hinge Kit Type 2
Cat: 786533 Rel: 31 Oct 20
MRP:$16.99 SAVE 17%
coming soon $14.16
FORTHCOMING
Tangible Waves AE Modular OR2x4 CV Generation & Manipulation Module
Cat: 786483 Rel: 31 Oct 20
 
CV generation & manipulation module
Notes: The OR2x4 module combines 2x4 inputs by logical OR rule; the input signals are usually trigger/gate signals and are treated as digital signals.

This can be used either for "mixing" gate/trigger signals from different sources or for audio signals. too.

There are two independent units with four inputs each. With a switch all eight inputs can be linked to an 8-input OR.

With the GATE inputs the signal can be controlled further; if GATE gets a "low" signal then the output is low also. By this, the output can be synced to a common clock signal and even if one of the inputs remains high the output changes. If the GATE input remains open, the module operates as a regular OR gate.
Read more
MRP:$31.37 SAVE 17%
coming soon $26.13
FORTHCOMING
Tangible Waves AE Modular POLAMIX 3 Channel Attenuverter & Mixer Module
Cat: 786486 Rel: 31 Oct 20
 
Attenuverter/mixer module
Notes: POLAMIX - a 3-channel atenuverter/mixer

The POLAMIX is similar to the 2CVTOOL in that you can offset and -/+ attenuate CV signals, but it also acts as a 3 channel mixer. Try to use this with 3 LFOs for modulation mayhem!

The three inputs are routed to corresponding knobs, where the center position means a level of zero. Turning the level knob to the right increases the level of the input signal; turning it to the left, the level is also increased, but inverted. E.G. when feeding a sawtooth signal to the input, you can get either a rising or falling signal at the output. And this for each of the three inputs. Finally, with the offset knob, the total level can be shifted up or down.

Read more
MRP:$40.52 SAVE 17%
coming soon $33.66
FORTHCOMING
Tangible Waves AE Modular SOLINA String Machine Emulation Module
Cat: 786501 Rel: 31 Oct 20
 
String machine emulation module
Notes: SOLINA, an emulation of the 70ies string machines!

The SOLINA module is based on th excellen work of Jan Ostman, who has developed a very good digital based emuation of the sound of the string synths that were popular in the music of the 70ies and 80ies, like ARP Solina (who gave this module it's name), Logan String and others.

Their unique sound is based on several, minor detuned sawtooth oscillators and an ensemble effect.

This module produces chords, which can be shaped in different ways, like selecting the base scale (minor, major), adding the 7th or a bass note and different variations of the chord. The sound can be shaped with a variable oscilator spread/detune, adding a phaser/ensemble and a tone knob for choosing the overall character between bass focused to only higher parts of the sound.
Read more
MRP:$94.12 SAVE 17%
coming soon $78.42
FORTHCOMING
Tangible Waves AE Modular MS20 FILTER Module
Cat: 786479 Rel: 31 Oct 20
 
Filter module
Notes: The famous MS 20 filter for AE modular!

This adaptation of the filter used first in Korg's MS-20 synth for AE modular offers control knobs for cutoff frequency, resonance and CV attenuator. Two signal inputs for different signal levels control the "drive" of the module. Compared to the wasp filter this filter has a significant self resonance and also a very quick response to changes in the cutoff frequency.

The filter type is switchable between lowpass and highpass (LP/HP switch).
Read more
MRP:$47.06 SAVE 17%
coming soon $39.20
FORTHCOMING
Tangible Waves AE Modular SAWVOX Synthvoice Module
Cat: 786493 Rel: 31 Oct 20
 
Synthvoice module
Notes: A complete basic synthvoice in nasty 8-bit!

The SAWVOX module is a complete synth voice with two sawtooth oscillators, a filter and a VCA, all realized digitally with a tiny 8-bit microcontroller. The oscillators are detuned by a fixed rate to get a fatter sound, and can be switched to a single oscillator. Of course, due to the limited resources of the processor, the sound has the typical 8-bit lofi char, but the CV tracking is quite fine, and it can find its place in a lot of patches. All parameters can be CV controlled, eg. filter frequency and resonance.

The module is based on a simple 8-bit microcontroller and an adapted design of Jan Ostman.
Read more
MRP:$53.60 SAVE 17%
coming soon $44.65
FORTHCOMING
Tangible Waves AE Modular SEQ8 Analogue 8-Step CV Sequencer Module
Cat: 786498 Rel: 31 Oct 20
 
8-step CV sequencer module
Notes: An analog 8-step CV sequencer.

The SEQ8 is an 8-step sequencer for controlling oscillator pitch and triggering envelopes.

Compared to "classic" analog sequencers it works a bit different: Instead of setting the CV for each step independently (which means in fact "tuning" each step which can be a bit tedious), the SEQ8 has 4 knobs for presetting different CV's (= notes); each of the 8 step knobs selects one of these CVs, plus 0V (=base note) plus Pause (no trigger output). So some CVs have to be fine-tuned once; with the step knobs you can focus entirely on the sequence itself and you can even modify it on the fly, still remaining in tune.

Additionally to the selected CV presets, the "raw" value of the step knobs is also accessible at an extra output.

Module power consumption: 7 mA
Read more
MRP:$62.75 SAVE 17%
coming soon $52.27
FORTHCOMING
Tangible Waves AE Modular SLEW/EDGE CV Slew Limiter & Edge Detector Module
Cat: 786504 Rel: 31 Oct 20
 
VC slew limiter & edge detector module
Notes: A slew limiter / edge detector for CV's.

The SLEW/EDGE module has two purposes:

First, it is a slew limiter, changes in the incoming CV are softened with a variable slew time. If the CV is used e.g. for controlling an oscillator, you get a portamento. With two switches it can be controlled if only rising or falling CVs or CV change in both directions are processed with the slew time. Additionally, the choice if rising and/or falling CVs are "slewed" can be controlled with external gate signals.

The second purpose of the module is an edge detector that indicates if the incoming CV is rising or falling; this information is available as different outputs (one that is high on rising and low on falling input, and short pulses on rise / fall / any change.

The SLEW/EDGE module combines the function of a slew limiter for CVs and a CV change detector in one module. The slew operation can be activated individually for rising and/or falling CVs, either by switches or controlled by external gate signals. The edge detection generates various gate / trigger output signals depending on rising or falling of the input CV.

Module power consumption: 5 mA

The second purpose of the module is an edge detector that indicates if the incoming CV is rising or falling; this information is available as different outputs (one that is high on rising and low on falling input, and short pulses on rise / fall / any change.

The Slew detector can be useful if using the S&H module for modulation; rather than jumps it will smooth the changes between the different levels, particularly good on filter modulation, unless you want the sudden changes.
Read more
MRP:$37.91 SAVE 17%
coming soon $31.58
FORTHCOMING
Tangible Waves AE Modular 1-Row 16x1 Standard Case
Cat: 786523 Rel: 31 Oct 20
MRP:$36.60 SAVE 17%
coming soon $30.50
FORTHCOMING
Tangible Waves AE Modular 1-Row 20x1 Wide Case
Cat: 786525 Rel: 31 Oct 20
MRP:$43.14 SAVE 17%
coming soon $35.93
FORTHCOMING
Tangible Waves AE Modular Patchwires Starter Set (6x10cm, 6x17cm, 6x25cm, 6x40cm)
Cat: 786510 Rel: 31 Oct 20
 
Patchwires starter set
Notes: A set of Patchwires for AE modular with different lengths (10, 17, 25, 40 cm), 6 pieces of each length.

Cable has a soft, flexible silicone insulation, with a gold plated pin.
Read more
MRP:$20.92 SAVE 17%
coming soon $17.43
FORTHCOMING
Tangible Waves AE Modular Case Hinge Kit Type 1
Cat: 786535 Rel: 31 Oct 20
 
Case hinge kit
Notes: The case hinge kit allows it to join two cases at a free angle. It contains:

two joint elements
four screws
a connection cable between the cases.

This type is designed for an application where one case is flat on the surface and the other one mounted at a certain angle. The triangle shape has the advantage that the contact to the surface is exteded to the rear side so the complete unit has a stable stand.

Via the connection cable the bus and power supply is shared between both cases, so no extra power supply / second MASTER module is needed for the additional case.
Read more
MRP:$18.30 SAVE 17%
coming soon $15.24
FORTHCOMING
Tangible Waves AE Modular Standard Bus Cable
Cat: 786536 Rel: 31 Oct 20
MRP:$18.30 SAVE 17%
coming soon $15.24
FORTHCOMING
Tangible Waves AE Modular Wide Bus Cable
Cat: 786538 Rel: 31 Oct 20
 
Bus cable
Notes: The Bus Cable connects the AE modular modules, it contains the power supply (GND, +5V) and CV, Gate, Controller, MIDI-clock / start / stop in a 10-pin ribbon cable. The folding pattern makes it possible to mount / unmount the module connected to the Iable.

PLEASE NOTE: This type 1 is for the WIDEracks (1-row or 2-row), for a 2-row rack you need also two of this cables.
Read more
MRP:$22.22 SAVE 17%
coming soon $18.51
FORTHCOMING
Tangible Waves AE Modular 2-Row 12x2 Narrow Case
Cat: 786519 Rel: 31 Oct 20
MRP:$41.83 SAVE 17%
coming soon $34.85
FORTHCOMING
Tangible Waves AE Modular 4BUFFER Buffered & Switchable Multiples Module
Cat: 786473 Rel: 31 Oct 20
 
Buffered & switchable multiples module
Notes: Buffered, switchable multiples for precise CV signals

The 4BUFFER module is a buffered multiple of 1 in to 2 out, with the option to chain the channels together to create a total of 8 outputs for one input or other combinations. Buffered multiples have the advantage over the normal passive mults in that there are no voltage drops across the signal path. As the AE system matures into more precision regarding oscillator tracking etc. this is a helpful utility for various situations.

Module power consumption: 1 mA
Read more
MRP:$27.45 SAVE 17%
coming soon $22.86
FORTHCOMING
Tangible Waves AE Modular ALGODRONE Bytebeat Algorithms Module
MRP:$100.65 SAVE 17%
coming soon $83.87
FORTHCOMING
Tangible Waves AE Modular FMOS FM Synthesis Module
Cat: 786477 Rel: 31 Oct 20
 
Synthesis module
Notes: FM synthesis for the AE!

The FMOS is a new digital oscillator that brings FM synthesis to the AE modular! It offers the basic FM synthesis with one oscillator and one modulator, running both with sine waves or triangle waves. The modulation depth and frequency ratio of the modulator can be set with a knob and additionally by CV control. If you want pure sine waves, this is for you too - simply set the modulation level to 0.

The module is based on a simple 8-bit microcontroller and an adapted design of Jan Ostman.
Read more
MRP:$53.60 SAVE 17%
coming soon $44.65
FORTHCOMING
Tangible Waves AE Modular 2CVTOOL CV Dual Attenuverter Module
Cat: 786470 Rel: 31 Oct 20
 
Dual attenuverter module
Notes: A dual attenuverter for CVs.

The 2CVTOOL offers two units for offset and -/+ attenuation for CV signals, also known as "attenuverter". This can be useful for shaping and tuning all kinds of modulation signals.

The inputs goes to the level knob, where the center position means a level of zero. Turning the level knob to the right increases the level of the input signal; turning it to the left, the level is also increased, but inverted. E.g. when feeding a sawtooth signal to the input, you can get either a rising or falling signal at the output. With the offset knob, the total level can be shifted up or down, with the clipping at the upper and lower ends an additional modfication of the signal is possible.

The 2CVTOOL offers two units for offset and -/+ attenuation for CV signals, also known as "attenuverter". This can be useful for all kinds of modulation purposes.

Module power consumption: 2 mA

Inputs
IN 1 - accept any CV or audio signal
IN 2 - accept any CV or audio signal
Outputs
Bus CV - CV signal from MIDI
Bus CTRL - CTRL signal from MIDI
OUT 1 (x2) - attenuated signal from IN1
OUT 2 (x2) - attenuated signal from IN2
MULT - passive multiple, not connected to the module's circuitry
Controls
OFFSET 1 - Potentiometer to dial in the offset voltage for channel 1. This will be added to the incoming CV.
LEVEL 1 - Potentiometer to select the attenuation. This is a bipolar control in that it can reduce the incoming voltage or increase it.
OFFSET 2 - Potentiometer to dial in the offset voltage for channel 2. This will be added to the incoming CV.
LEVEL 2 - Potentiometer to select the attenuation. This is a bipolar control in that it can reduce the incoming voltage or increase it.
Read more
MRP:$40.52 SAVE 17%
coming soon $33.77
FORTHCOMING
Tangible Waves AE Modular 2-Row 16x2 Standard Case
Cat: 786514 Rel: 31 Oct 20
 
2-row 16x2 wide case
Notes: The 2-row rack for AE modular is 16 units wide with 2 rows; the MASTER module consumes 2 units so you have 30U remaining for other modules.

Via a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

If you want your rack pre-installed by us, please add the mounting service to your order (module mounting (up to 32 modules) or module mounting (up to 16 modules) )

The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.

Dimensions: 41.3 x 21.7 x 4.5 cm (width x depth x height)
Read more
MRP:$49.67 SAVE 17%
coming soon $41.39
FORTHCOMING
Tangible Waves AE Modular 2-Row 20x2 Wide Case
Cat: 786515 Rel: 31 Oct 20
 
2-row 20x2 wide case
Notes: The 2-row rack for AE modular is 20 units wide with 2 rows; the MASTER module consumes 2 units so you have 38U remaining for other modules.

Via a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

If you want your rack pre-installed by us, please add the mounting service to your order (module mounting (up to 32 modules) or module mounting (up to 16 modules) )

The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.

Dimensions: 51.5 x 21.7 x 4.5 cm (width x depth x height)
Read more
MRP:$57.52 SAVE 17%
coming soon $47.92
FORTHCOMING
Joue Water Piano Pad For Board Play Modular MIDI Controller (blue, green)
MRP:$45.75 SAVE 17%
coming soon $38.12
FORTHCOMING
Joue Fire Keys Pad For Board Play Modular MIDI Controller (yellow, orange)
MRP:$45.75 SAVE 17%
coming soon $38.12
FORTHCOMING
Joue Water Drum Pad For Board Play Modular MIDI Contoller (blue, green)
Cat: 781796 Rel: 31 Oct 20
 
Drum pad
Notes: Drum pads, Water colour scheme.
Read more
MRP:$45.75 SAVE 17%
coming soon $38.12
FORTHCOMING
Joue Water Guitar Pad For Board Play Modular MIDI Controller (blue, green)
Cat: 781799 Rel: 31 Oct 20
 
Pad for Play MIDI controller
Notes: 6-string guitar neck on 8 frets, water color scheme.
Read more
MRP:$45.75 SAVE 17%
coming soon $38.12
FORTHCOMING
Joue Water Keys Pad For Board Play Modular MIDI Controller (blue, green)
Cat: 781801 Rel: 31 Oct 20
 
Pad for Play MIDI controller
Notes: 17 keyboard keys, water color scheme
Read more
MRP:$45.75 SAVE 17%
coming soon $38.12
FORTHCOMING
Tangible Waves AE Modular Narrow Bus Cable
Cat: 786537 Rel: 30 Oct 20
 
Bus cable
Notes: The Bus Cable connects the AE modular modules, it contains the power supply (GND, +5V) and CV, Gate, Controller, MIDI-clock / start / stop in a 10-pin ribbon cable. The folding pattern makes it possible to mount / unmount the module connected to the Iable.

PLEASE NOTE: This type 1 is for the NARROW racks (1-row or 2-row), for a 2-row rack you need two of this cable.
Read more
MRP:$15.69 SAVE 17%
coming soon $13.06
FORTHCOMING
Joue Fire Guitar Pad For Board Play Modular MIDI Controller (yellow, orange)
MRP:$45.75 SAVE 17%
coming soon $38.12
FORTHCOMING
Joue Board Play Modular MIDI Controller With Joue App For iPad & iPhone
MRP:$349.02 SAVE 17%
coming soon $290.84
FORTHCOMING
Joue Fire Piano Pad For Board Play Modular MIDI Contorller (yellow, orange)
MRP:$45.75 SAVE 17%
coming soon $38.12
FORTHCOMING
Arturia Keylab 88 MKII 88-Note Controller Keyboard
Cat: 786254 Rel: 29 Oct 20
 
Controller keyboard
Notes: A world-class hammer action, piano-feel keybed to put your heart and soul into your music. KeyLab 88 MkII is highly expressive, and will give you that real mechanical feeling, just like playing an acoustic piano.

Whether you're an experienced veteran of the industry, or just starting out as a music producer, you'll love the awesome instruments that come with KeyLab MkII 88. Get your KeyLab 88 MkII and you'll also get Analog Lab, Piano V, Wurli V, Vox Continental V - the full versions absolutely free!

Ableton Live Lite is also included so you can get creative right out of the box.

Tour ready
Beautiful, but ergonomic. Stylish, but understandable. Robust, but elegant. KeyLab MkII 88 has been specially designed with touring professionals in mind. Its aluminum and wood chassis don't bend or flex as you play, its build quality is unmatched.

Awesome integration
With smart-mapping controls, clear labels, and even unique magnetic strips for each DAW, KeyLab 88 MkII takes the guesswork out of playing, recording, and mixing. The rotary knobs, faders, and
buttons are all automatically assigned to the most appropriate parameters in any Arturia software instrument, but it doesn't stop there- KeyLab 88 MkII features CV/gate connectivity so you can also control your modular rig and vintage synths. It features MIDI ports, as well as MIDI over USB. It can even draw all its power via the same USB connection! The finest feeling 88-note hammer action controller keyboard, great looks, built for the road, and tons of top-quality virtual instruments. It's time to feel the music. This isn't just a MIDI controller. It's a gateway to a better music-making experience.

Included Software
Snalog Lab, Piano V, Wurli V, Vox Continental V, and Ableton Live Lite, MIDI Control Center
Read more
MRP:$1,083.67 SAVE 17%
coming soon $903.05
FORTHCOMING
Arturia Keylab 88 MKII Limited Edition Power Trio Bundle With V Collection 6 & Wooden Legs
Cat: 786250 Rel: 29 Oct 20
 
Music software bundle
Notes: In line with Arturia's mission to give people powerful tools to fulfil their artistic destiny, they have released a limited edition bundle of impressive music gear with style. This all-you-need package includes the ultimate MIDI controller, KeyLab 88 MkII, supported by sturdy, timeless looking wooden legs, all powered up with V Collection 6, a library of synths that made music history.

Stand out with style and elevate your inspiration to new heights. Whether you want to go on stage or make your home setup look classy, this bundle brings you a complete setup for sophisticated and modern music production.

WHAT'S INCLUDED IN THE BUNDLE?

KeyLab 88 MkII

KeyLab 88 MkII is the definitive 88-note controller for rich music production with an authentic piano feel. It's the most expressive, intricate, and powerful controller you can wish for. Its dynamic performance and studio controls create an intuitive way to guide your music flow. Enjoy its effortless integration with other pieces of gear thanks to its CV/gate connectivity, MIDI ports, and MIDI over USB. Add the timeless design to match its looks with its power, and you've got star quality foundation.

V Collection 6

V Collection 6 offers 20 legendary instruments that made music history, modernized for contemporary production. A library of awesome analog synths, powerful digital instruments, and famous pianos and keyboards, this pack means serious business. More than 7,400 inspiring presets to browse from. For the musicians who want to power up their music with legendary sounds and style. Wooden legs Support your music with a timeless style. Elegant for the living room, stylish for the stage, made with beautiful solid ash with cinnamon finish. This set of wooden legs securely attaches to KeyLab Mk II's chassis. Tried and tested for live shows, you can rest assured its sturdy structure will sup-port your setup as you go wild for your audience. Dealing with an uneven surface? No problem. You can adjust each leg length thanks to its smart screw based mechanical system. Mounting is child's play - you'll only need 5 minutes to follow the simple instructions that come in the box.

Included Software
V Collection 6
Analog Lab 4
Arturia Software Center

20 iconic instruments with V Collection 6, modernized for the music production of today: Buchla Easel V, Mini V, Matrix-12 V, Solina V, Jup-8 V, ARP 2600 V, CS-80 V, Prophet V, Modular V, Synthi V; CMI V, Synclavier V, Clavinet V, Piano V, Stage-73 V, Farfisa V, Wurli V, VOX Continental V, B-3 V.
Read more
MRP:$1,253.60 SAVE 17%
coming soon $1,044.68
FORTHCOMING
Electrosmith Daisy Field Programable Monosynth, Drum Machine & MIDI Sequencer
Cat: 786205 Rel: 29 Oct 20
MRP:$535.95 SAVE 17%
coming soon $446.62
FORTHCOMING
Electrosmith Daisy Petal Programmable Effects Pedal
Cat: 786213 Rel: 29 Oct 20
MRP:$380.40 SAVE 17%
coming soon $316.98
FORTHCOMING
QTX Studio Monitor Speaker Stands (50cm, pair)
QTX
Cat: 785757 Rel: 24 Oct 20
 
Stands for QTX Studio Monitor Speakers
Notes: Studio Monitor Stands - 2pcs

A pair of stylish monitor stands ideal for studio, home or small projects. Supplied with floor spikes to increase stability providing a sturdy stand for monitor speakers.

The box for this item contains :

2 x Studio Monitor Stands
8 x Floor Spikes
1 x Hex Key
Pack of M6x25 fixing screws
Read more
coming soon TBA
FORTHCOMING
Citronic SMS001 Small Studio Swivel Microphone Boom Arm
Citronic SMS001 Small Studio Swivel Microphone Boom Arm (small studio microphone desk stand)
Cat: 785763 Rel: 24 Oct 20
 
Microphone boom arm
Notes: A professional microphone boom arm with desk clamp for studio or broadcasting use. Featuring spring retraction for quick and smooth positioning and a lockable hinge for safety.

Rotates 360°
Features spring retraction and a lockable hinge
Microphone clip supplied
For desks with a maximum depth of 50mm

Read more
MRP:$18.30 SAVE 17%
coming soon $15.24
FORTHCOMING
Citronic SMS002 Large Studio Swivel Microphone Boom Arm
Citronic SMS002 Large Studio Swivel Microphone Boom Arm (large studio microphone desk stand)
Cat: 785764 Rel: 24 Oct 20
 
Microphone boom arm
Notes: A professional microphone boom arm with desk clamp for studio or broadcasting use. Featuring spring retraction for quick and smooth positioning and a lockable hinge for safety.

Rotates 360°
Features spring retraction and a lockable hinge
Microphone clip supplied
For desks with a maximum depth of 50mm
Read more
MRP:$19.61 SAVE 17%
coming soon $16.33
FORTHCOMING
NUX MG-300 Guitar Multi-FX Pedal
NUX
Cat: 785758 Rel: 24 Oct 20
MRP:$142.48 SAVE 19%
coming soon $115.47
FORTHCOMING
Intellijel Bifold 3U Module
Cat: 785428 Rel: 22 Oct 20
MRP:$279.74 SAVE 17%
coming soon $233.11
FORTHCOMING
Doepfer A-111-5 Mini Synthesiser Voice Module
Cat: 785445 Rel: 22 Oct 20
 
Synthesiser voice module
Notes: Module A-111-5 is a complete monophonic synthesizer module that includes these components (modular version of Dark Energy):

VCO
Manual tune control (with an internal jumper the range can be set to ~ +/-1 half an octave or ~ +/-2.5 octaves)
Range switch -1 / 0 / +1 octave
Frequency range about 10Hz ... 12kHz - FM (frequency modulation) control with modulation source switch (LFO1 / off / ADSR)
Manual pulsewidth control for rectangle waveform
PWM control with modulation source switch (LFO2 / off / ADSR)
Waveform switch (sawtooth / off / triangle)
The sum of the waveform chosen by this switch and the rectangle is fed into the VCF (to turn the rectangle off the PW control has to be set fully CCW)
External CV input for VCO frequency (1V/octave)
External CV input for external PWM of the rectangle - internal CV input for frequency (1V/octave) connected to the A-100 bus via jumper, the jumper can be used to interrupt this internal connection if not wanted

VCF
24 dB low pass
~ 12 octaves frequency range
Manual frequency control
Tracking switch half - off - full (internally connected to the external frequency CV input of the VCO, i.e. the VCF tracks to the VCO if the switch is set to "half" or "full" position)
XM: exponential FM (frequency modulation) control with modulation source switch (LFO2 / off / ADSR)
LM: linear FM (frequency modulation) control to modulate the VCF by the triangle of the VCO in a linear (!) manner
Manual resonance control (up to self oscillation)
External audio input (this signal is added to the VCO signal)
External CV input for filter frequency - 1V/octave tracking for usage of the VCF as a sine wave oscillator (not as precise as the VCO but much better than most of the other filters)
VCA
Manual amplitude control
AM (amplitude modulation) control with modulation source switch (LFO1 / off / ADSR)
External CV input for VCA amplitude - special control scale: exponential scale in the range from about -20dB to -80/90dB, linear scale from about -20dB to 0dB (Remark: this special control scale results in a loudness behaviour that is a bit different from pure linear or exponential VCA)
LFO1 and LFO2
Manual frequency control
Waveform switch (triangle / off / rectangle)
Range switch (low, audio, medium) - LED display (dual green/red color for positive/negative share of the signal)
The inverted LFO1 signal is available as an additional socket (to use the LFO1 signal for external modules)
An internal jumper can be used to select between the LFO1 signal or the inverted LFO1 signal

ADSR
Manual controls for Attack, Decay, Sustain, Release
Range switch (long, short, medium) - blue LED display
ADSR signal is available as an additional socket (to use the ADSR signal for external modules)
Gate input connected to the A-100 bus via jumper, the jumper can be used to interrupt this internal connection if not wanted

Remarks:
As the LFO frequencies can go up to moderate audio range (~ 5kHz) even audio FM effects of VCO (pitch and pulsewidth), VCF and ADSR are possible.

If the VCO is turned off (waveform switch = center position, pulsewidth control = fully CCW) and the VCF resonance is set to maximum the module can be used as a sine oscillator. The sine can be modulated in a linear manner from the triangle wave of the VCO and by LFO2 in an exponential manner at the same time !

From the factory the socket labelled "LFO1" outputs the inverted LFO1 signal. But as the module has several internal pin headers available even another signal may appear at this socket by changing the internal module patch. These six pin headers are available: LFO1 output, LFO2 output, ADSR output, inverter input, inverter output, output socket. The internal default patch is LFO1 -> inverter input, inverter output -> output socket (i.e. socket = inverted LFO1). But even another signal can be patched to this socket (e.g. inverted ADSR, non-inverted LFO1, inverted or non-inverted LFO2). It is also possible to add a blind panel next to the A-111-5 with a couple of sockets that are connected to the corresponding pins of the A-111-5 pc board. The in- and outputs of the VCO, VCF and VCA are not available as pin headers because the VCO, VCF and VCA are internally connected in the circuit which is used in this module.
Read more
MRP:$423.53 SAVE 17%
coming soon $352.93
FORTHCOMING
Presonus AudioBox Studio Ultimate Bundle 25th Anniversary Edition Deluxe Hardware & Software Recording Collection
Notes: Everything you need to record and produce- and beyond.
Produce and record like a pro with a single-purchase bundle! The core of this package is the AudioBox USBr 96 audio/MIDI interface and award-winning Studio One recording and production software. You also get PreSonusr' best-selling Eris E3.5 Active Media Reference Monitors and HD7 headphones, allowing you to monitor your work loud and proud or quietly to yourself. Lastly, the M7 dynamic microphone is a superior all-purpose condenser mic ideal for guitar and vocalsiand we even included all the necessary cables and a desktop mic stand.

AudioBox USB 96: Simple, reliable, and portable.
The AudioBox USB 96 is the heart of the AudioBox Studio Ultimate Bundle. This simple, handy little audio/MIDI interface has just the right features for basic recording needs, including two combo mic/instrument inputs and zero-latency monitoring, so you can simply plug in and start recording right away. Bus-powered, built to travel, compatible with most recording software for Mac and Windows, and equipped with high-performance microphone preamplifiers and professional-quality, 24-bit, 96 kHz converters, the AudioBox USB 96 makes high-definition recording easy.

Studio One Artist makes recording a breeze.
No other entry-level recording and production software is this easy to learn and use, yet is capable of creating studio-quality output. Studio Oner Artist lets you work quickly and stay focused on your inspiration, offers unlimited tracks and plug-ins, and delivers features not normally found in entry-level DAWs. Access powerful editing tools without wading through menus. Load and save audio clips, MIDI files, and effects by drag-and-drop. Studio One makes it easy!

Sound you can trust. Eris 3.5
PreSonusr Eris-series studio monitors are used worldwide by audio engineers who need to hear every detail of their recordings. Eris E3.5 employs the same technology as the larger Eris models to deliver studio-quality sound, with a smooth and accurate frequency response. They're compact enough to fit almost anywhere, but still offer robust I/Oiyou can connect them to nearly anything.

Capture every nuance with the M7 condenser microphone.
Get your mic collection off to a good start with the M7 large-diaphragm condenser microphone and desktop stand. Condenser mics are the overwhelming choice of recording studio professionals, enabling you to capture musical details, harmonics, and subtle nuances that would get lost with dynamic mics. Large-diaphragm condenser microphones, like the M7, tend to "warm up" a sound, making them the go-to microphone for recording vocals and a wide range of instruments.

Hear every detail with HD7 professional headphones.
PreSonus' high-definition HD7 headphones take advantage of a patented, semi-open sound chamber to deliver exceptionally deep low frequencies with a balanced and yet powerful bass punch. Accurate midrange and extended treble response let you pick out the fine details of a mix or track. The lightweight, ergonomic design adjusts to any head size, offering a comfortable listening experience during long recording sessions.

Make your own magic.
PreSonus audio interfaces come with everything you need to craft your own mesmerizing spells in the studio. That's why Studio One Artist is included with Presonus every audio interface.Not only that, the Studio Magic Suite of software is also included with Presonus audio interface products.
Read more
MRP:$346.41 SAVE 17%
coming soon $288.67
FORTHCOMING
Sensel Piano Overlay For Morph MIDI Controller
Cat: 785459 Rel: 22 Oct 20
 
Overlay
Notes: Make music on the go or in the studio with the Piano Overlay. It features 24 keys, octave-shift, transport controls, velocity sensitivity, and more. Combine up to four devices to create a full size piano! Pitch bend on every finger for unique control over your synths and sounds.
The MIDI protocol is USB Class-compliant and has MIDI Polyphonic Expression (MPE) and Bluetooth MIDI

*This overlay is designed to be used with the Sensel Morph. So if you don't already own a Morph, pick up the Morph with Piano Overlay or the Music Maker's Bundle.

Music Software Compatibility
The Morph is compatible with any music software that listens to MIDI controls.
Free licenses for Arturia - Analog Lab Lite and Bitwig Studio 8-Track are included free with the Morph.
Our user guide includes instructions for:
Ableton Live
Apple GarageBand
Apple Logic
Bitwig Studio
Cycling '74 Max
Image-Line FL Studio
Presonus Studio One 2
Propellerhead Reason

The Morph is also compitable with these iOS Apps:
Apple GarageBand
SunVox
FunkBox Drum Machine
Steinberg Cubase, Avid ProTools, MOTU Digital Performer, Cakewalk SONAR, Cockos Reaper, Renoise, Traktion, etc. will also listen to The Morph, along with any music software that listens to MIDI controls.
Read more
MRP:$44.44 SAVE 17%
coming soon $37.03
FORTHCOMING
Sensel Buchla Thunder Overlay For Morph MIDI Controller
Cat: 785456 Rel: 22 Oct 20
 
Overlay
Notes: The legendary expressive controller, the Buchla Thunder, now comes to the Sensel Morph in an exclusive new partnership with Buchla U.S.A.

The Buchla Thunder Overlay exclusively features a new preset system to the Morph. By holding the preset button and tapping on one of the nine numerical keys, you can easily and instantly switch between nine mappings without needing to open the SenselApp. Need to go from an instrument controller to a virtual mixer? Want to swap between scales? Presets add a seamless extension of expressive control possibility to the Buchla Thunder Overlay.

The Buchla Thunder is uniquely well-suited to a variety of instruments - from synthesizers with rich and evolving timbres, to acoustic samples that benefit from a more human touch, to hardware synthesizers like the legendary Buchla Easel. You can witness the richness of expression in the videos above.

The MIDI protocol is USB Class-compliant and supports MIDI Polyphonic Expression (MPE) and Bluetooth MIDI.

Read more
MRP:$83.66 SAVE 24%
coming soon $63.18
FORTHCOMING
Sensel Music Production Overlay For Morph MIDI Controller
Cat: 785462 Rel: 22 Oct 20
 
Overlay
Notes: Tune up your electronic music chops with Sensel's customizable MIDI control surface. The 16 pads, bass synth keyboard, and slew of knobs and sliders equip you with all you need for your next hit. Pitch bend and after-pressure make this an essential tool for beats and sound design.
The MIDI protocol is USB Class-compliant and has MIDI Polyphonic Expression (MPE) and Bluetooth MIDI
*This overlay is designed to be used with the Sensel Morph. So if you don't already own a Morph, pick up the Morph with Music Production Overlay or the Music Maker's Bundle.

Music Software Compatibility
The Morph is compatible with any music software that listens to MIDI controls.
Free licenses for Arturia - Analog Lab Lite and Bitwig Studio 8-Track are included free with the Morph.
Our user guide includes instructions for:
Ableton Live
Apple GarageBand
Apple Logic
Bitwig Studio
Cycling '74 Max
Image-Line FL Studio
Presonus Studio One 2
Propellerhead Reason

The Morph is also compatible with these iOS Apps:
Apple GarageBand
SunVox
FunkBox Drum Machine
Steinberg Cubase, Avid ProTools, MOTU Digital Performer, Cakewalk SONAR, Cockos Reaper, Renoise, Traktion, etc. will also listen to The Morph, along with any music software that listens to MIDI controls.
Read more
MRP:$44.44 SAVE 17%
coming soon $37.03
Artículos del 1 al 50 de 601 en la página 1 de 13
1  2  3  ...  13  »

Filter

Coming Soon: Studio Equipment
Close